Message ID | 20200509165624.20791-6-jagan@amarulasolutions.com |
---|---|
State | New |
Headers | show |
Series |
|
Related | show |
On Sat, May 9, 2020 at 10:26 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > Enable PCIe/M.2 support on > - NanoPC-T4 > - ROC-RK3399-PC Mezzanine boards. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v3: > - none > > arch/arm/dts/rk3399-u-boot.dtsi | 1 + > configs/nanopc-t4-rk3399_defconfig | 4 ++++ > configs/roc-pc-mezzanine-rk3399_defconfig | 4 ++++ > 3 files changed, 9 insertions(+) > > diff --git a/arch/arm/dts/rk3399-u-boot.dtsi > b/arch/arm/dts/rk3399-u-boot.dtsi > index 9bb130a92a..d66d5b6a38 100644 > --- a/arch/arm/dts/rk3399-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-u-boot.dtsi > @@ -8,6 +8,7 @@ > aliases { > mmc0 = &sdhci; > mmc1 = &sdmmc; > + pci0 = &pcie0; > }; > > cic: syscon@ff620000 { > diff --git a/configs/nanopc-t4-rk3399_defconfig > b/configs/nanopc-t4-rk3399_defconfig > index ae865908d8..3bb5b498f2 100644 > --- a/configs/nanopc-t4-rk3399_defconfig > +++ b/configs/nanopc-t4-rk3399_defconfig > @@ -18,6 +18,7 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > CONFIG_CMD_USB=y > +CONFIG_CMD_PCI=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > CONFIG_SPL_OF_CONTROL=y > @@ -34,10 +35,13 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y > CONFIG_DM_ETH=y > CONFIG_ETH_DESIGNWARE=y > CONFIG_GMAC_ROCKCHIP=y > +CONFIG_NVME=y > +CONFIG_PCI=y > CONFIG_PMIC_RK8XX=y > CONFIG_REGULATOR_PWM=y > CONFIG_REGULATOR_RK8XX=y > CONFIG_PWM_ROCKCHIP=y > +CONFIG_DM_RESET=y > CONFIG_BAUDRATE=1500000 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_SYSRESET=y > diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig > b/configs/roc-pc-mezzanine-rk3399_defconfig > index 5a694edc03..0b853805f3 100644 > --- a/configs/roc-pc-mezzanine-rk3399_defconfig > +++ b/configs/roc-pc-mezzanine-rk3399_defconfig > @@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > CONFIG_CMD_USB=y > +CONFIG_CMD_PCI=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > CONFIG_SPL_OF_CONTROL=y > @@ -36,11 +37,14 @@ CONFIG_SPI_FLASH_WINBOND=y > CONFIG_DM_ETH=y > CONFIG_ETH_DESIGNWARE=y > CONFIG_GMAC_ROCKCHIP=y > +CONFIG_NVME=y > +CONFIG_PCI=y > CONFIG_PMIC_RK8XX=y > CONFIG_REGULATOR_PWM=y > CONFIG_REGULATOR_RK8XX=y > CONFIG_PWM_ROCKCHIP=y > CONFIG_RAM_RK3399_LPDDR4=y > +CONFIG_DM_RESET=y > CONFIG_BAUDRATE=1500000 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_ROCKCHIP_SPI=y > -- > 2.17.1 > Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> #roc-rk3399-pc
On 2020/5/10 上午12:56, Jagan Teki wrote: > Enable PCIe/M.2 support on > - NanoPC-T4 > - ROC-RK3399-PC Mezzanine boards. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > Changes for v3: > - none > > arch/arm/dts/rk3399-u-boot.dtsi | 1 + > configs/nanopc-t4-rk3399_defconfig | 4 ++++ > configs/roc-pc-mezzanine-rk3399_defconfig | 4 ++++ > 3 files changed, 9 insertions(+) > > diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi > index 9bb130a92a..d66d5b6a38 100644 > --- a/arch/arm/dts/rk3399-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-u-boot.dtsi > @@ -8,6 +8,7 @@ > aliases { > mmc0 = &sdhci; > mmc1 = &sdmmc; > + pci0 = &pcie0; > }; > > cic: syscon@ff620000 { > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig > index ae865908d8..3bb5b498f2 100644 > --- a/configs/nanopc-t4-rk3399_defconfig > +++ b/configs/nanopc-t4-rk3399_defconfig > @@ -18,6 +18,7 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > CONFIG_CMD_USB=y > +CONFIG_CMD_PCI=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > CONFIG_SPL_OF_CONTROL=y > @@ -34,10 +35,13 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y > CONFIG_DM_ETH=y > CONFIG_ETH_DESIGNWARE=y > CONFIG_GMAC_ROCKCHIP=y > +CONFIG_NVME=y > +CONFIG_PCI=y > CONFIG_PMIC_RK8XX=y > CONFIG_REGULATOR_PWM=y > CONFIG_REGULATOR_RK8XX=y > CONFIG_PWM_ROCKCHIP=y > +CONFIG_DM_RESET=y > CONFIG_BAUDRATE=1500000 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_SYSRESET=y > diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig > index 5a694edc03..0b853805f3 100644 > --- a/configs/roc-pc-mezzanine-rk3399_defconfig > +++ b/configs/roc-pc-mezzanine-rk3399_defconfig > @@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > CONFIG_CMD_USB=y > +CONFIG_CMD_PCI=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > CONFIG_SPL_OF_CONTROL=y > @@ -36,11 +37,14 @@ CONFIG_SPI_FLASH_WINBOND=y > CONFIG_DM_ETH=y > CONFIG_ETH_DESIGNWARE=y > CONFIG_GMAC_ROCKCHIP=y > +CONFIG_NVME=y > +CONFIG_PCI=y > CONFIG_PMIC_RK8XX=y > CONFIG_REGULATOR_PWM=y > CONFIG_REGULATOR_RK8XX=y > CONFIG_PWM_ROCKCHIP=y > CONFIG_RAM_RK3399_LPDDR4=y > +CONFIG_DM_RESET=y > CONFIG_BAUDRATE=1500000 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_ROCKCHIP_SPI=y
diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi index 9bb130a92a..d66d5b6a38 100644 --- a/arch/arm/dts/rk3399-u-boot.dtsi +++ b/arch/arm/dts/rk3399-u-boot.dtsi @@ -8,6 +8,7 @@ aliases { mmc0 = &sdhci; mmc1 = &sdmmc; + pci0 = &pcie0; }; cic: syscon@ff620000 { diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig index ae865908d8..3bb5b498f2 100644 --- a/configs/nanopc-t4-rk3399_defconfig +++ b/configs/nanopc-t4-rk3399_defconfig @@ -18,6 +18,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y CONFIG_SPL_OF_CONTROL=y @@ -34,10 +35,13 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y +CONFIG_NVME=y +CONFIG_PCI=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y +CONFIG_DM_RESET=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYSRESET=y diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig index 5a694edc03..0b853805f3 100644 --- a/configs/roc-pc-mezzanine-rk3399_defconfig +++ b/configs/roc-pc-mezzanine-rk3399_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y CONFIG_SPL_OF_CONTROL=y @@ -36,11 +37,14 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y +CONFIG_NVME=y +CONFIG_PCI=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM_RK3399_LPDDR4=y +CONFIG_DM_RESET=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_ROCKCHIP_SPI=y
Enable PCIe/M.2 support on - NanoPC-T4 - ROC-RK3399-PC Mezzanine boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - none arch/arm/dts/rk3399-u-boot.dtsi | 1 + configs/nanopc-t4-rk3399_defconfig | 4 ++++ configs/roc-pc-mezzanine-rk3399_defconfig | 4 ++++ 3 files changed, 9 insertions(+)