| Message ID | 20201202121241.109952-8-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On Wed, Dec 02, 2020 at 05:42:38PM +0530, Jagan Teki wrote: > i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam. > > C.TOUCH 2.0 is a general purpose carrier board with capacitive > touch interface support. > > i.Core MX8M Mini needs to mount on top of this Carrier board for > creating complete i.Core MX8M Mini C.TOUCH 2.0 board. This should be squashed with previous one. You basically add support for both similar boards so there is no reason to split the bindings change into two. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 2e520733ce4e..8c8f7728788d 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -668,6 +668,7 @@ properties: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SOM + - engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 - engicam,icore-mx8mm-edimm2.2 # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board
i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Add bindings for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)