| Message ID | 20190311133637.18334-2-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On Mon, Mar 11, 2019 at 07:06:23PM +0530, Jagan Teki wrote: > Vertical video start delay is computed by excluding vertical front > porch value from total vertical timings. > > This clearly confirmed from BSP code and here how it computed, > > (drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp; > => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp) > => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y) > - panel->lcd_y - (panel->lcd_vbp) > => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y > - panel->lcd_y - panel->lcd_vbp > => timmings->ver_front_porch > > But the current driver is assuming it can exclude vertical front > porch along with vertical sync values from total vertical timings, > which resulting wrong start delay indeed wrong picture rendering > in the panel. Same story here: which panel, which datasheet, which "wrong picture rendering"? > Example: timings, where it produces the issue. > { > .vdisplay = 600, > .vsync_start = 600 + 12, > .vsync_end = 600 + 12 + 2, > .vtotal = 600 + 12 + 2 + 21, > } Can you 100% trust those timings? > It produces the desired start delay value as 19 but the correct working > value should be 513. > > So, Fix it by computing proper video start delay. > > Fixes: 69006ef0ecb1 ("drm/sun4i: dsi: Change the start delay calculation") > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > index 62a508420227..8d6292c0158b 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > @@ -364,8 +364,14 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, > static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, > struct drm_display_mode *mode) > { > - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); > - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; > + u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay); > + > + /** > + * BSP comment: > + * put start_delay to tcon. set ready sync early to dramfreq, > + * so set start_delay 1 > + */ That doesn't make any sense to me... What does it mean? Maxime
On Mon, Mar 11, 2019 at 9:07 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Mon, Mar 11, 2019 at 07:06:23PM +0530, Jagan Teki wrote: > > Vertical video start delay is computed by excluding vertical front > > porch value from total vertical timings. > > > > This clearly confirmed from BSP code and here how it computed, > > > > (drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > > u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp; > > => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp) > > => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y) > > - panel->lcd_y - (panel->lcd_vbp) > > => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y > > - panel->lcd_y - panel->lcd_vbp > > => timmings->ver_front_porch > > > > But the current driver is assuming it can exclude vertical front > > porch along with vertical sync values from total vertical timings, > > which resulting wrong start delay indeed wrong picture rendering > > in the panel. > > Same story here: which panel, which datasheet, which "wrong picture > rendering"? It's bananapi,s070wv20-ct16 DSI > > > Example: timings, where it produces the issue. > > { > > .vdisplay = 600, > > .vsync_start = 600 + 12, > > .vsync_end = 600 + 12 + 2, > > .vtotal = 600 + 12 + 2 + 21, > > } > > Can you 100% trust those timings? ie. reason, I have given the Mainline timings [1]. The above timings are wrongly mentioned actual timings are from [1] > > > It produces the desired start delay value as 19 but the correct working > > value should be 513. > > > > So, Fix it by computing proper video start delay. > > > > Fixes: 69006ef0ecb1 ("drm/sun4i: dsi: Change the start delay calculation") > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 ++++++++-- > > 1 file changed, 8 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > index 62a508420227..8d6292c0158b 100644 > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > @@ -364,8 +364,14 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, > > static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, > > struct drm_display_mode *mode) > > { > > - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); > > - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; > > + u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay); > > + > > + /** > > + * BSP comment: > > + * put start_delay to tcon. set ready sync early to dramfreq, > > + * so set start_delay 1 > > + */ > > That doesn't make any sense to me... What does it mean? Which is meaning as above stated as "BSP comment" from here[2] [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/panel/panel-simple.c?id=7ad8b41cd8f5c2842646d01cdd576663caee04a7 [2] https://github.com/longsleep/linux-pine64/blob/pine64-hacks-1.2/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L729
On Mon, Mar 11, 2019 at 09:31:11PM +0530, Jagan Teki wrote: > On Mon, Mar 11, 2019 at 9:07 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > On Mon, Mar 11, 2019 at 07:06:23PM +0530, Jagan Teki wrote: > > > Vertical video start delay is computed by excluding vertical front > > > porch value from total vertical timings. > > > > > > This clearly confirmed from BSP code and here how it computed, > > > > > > (drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > > > u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp; > > > => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp) > > > => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y) > > > - panel->lcd_y - (panel->lcd_vbp) > > > => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y > > > - panel->lcd_y - panel->lcd_vbp > > > => timmings->ver_front_porch > > > > > > But the current driver is assuming it can exclude vertical front > > > porch along with vertical sync values from total vertical timings, > > > which resulting wrong start delay indeed wrong picture rendering > > > in the panel. > > > > Same story here: which panel, which datasheet, which "wrong picture > > rendering"? > > It's bananapi,s070wv20-ct16 DSI You're answering one out of three questions. > > > Example: timings, where it produces the issue. > > > { > > > .vdisplay = 600, > > > .vsync_start = 600 + 12, > > > .vsync_end = 600 + 12 + 2, > > > .vtotal = 600 + 12 + 2 + 21, > > > } > > > > Can you 100% trust those timings? > > ie. reason, I have given the Mainline timings [1]. The above timings > are wrongly mentioned actual timings are from [1] You're still answering partially here. Those timings are working for RGB, you have no proof that we need to make the same adjustments for DSI. > > > It produces the desired start delay value as 19 but the correct working > > > value should be 513. > > > > > > So, Fix it by computing proper video start delay. > > > > > > Fixes: 69006ef0ecb1 ("drm/sun4i: dsi: Change the start delay calculation") > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > --- > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 ++++++++-- > > > 1 file changed, 8 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > index 62a508420227..8d6292c0158b 100644 > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > @@ -364,8 +364,14 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, > > > static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, > > > struct drm_display_mode *mode) > > > { > > > - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); > > > - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; > > > + u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay); > > > + > > > + /** > > > + * BSP comment: > > > + * put start_delay to tcon. set ready sync early to dramfreq, > > > + * so set start_delay 1 > > > + */ > > > > That doesn't make any sense to me... What does it mean? > > Which is meaning as above stated as "BSP comment" from here[2] It doesn't matter where you took it from. If you cannot explain what happen, putting a random label that doesn't explain anything will not help. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On Tue, Mar 19, 2019 at 3:55 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Mon, Mar 11, 2019 at 09:31:11PM +0530, Jagan Teki wrote: > > On Mon, Mar 11, 2019 at 9:07 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > On Mon, Mar 11, 2019 at 07:06:23PM +0530, Jagan Teki wrote: > > > > Vertical video start delay is computed by excluding vertical front > > > > porch value from total vertical timings. > > > > > > > > This clearly confirmed from BSP code and here how it computed, > > > > > > > > (drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > > > > u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp; > > > > => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp) > > > > => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y) > > > > - panel->lcd_y - (panel->lcd_vbp) > > > > => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y > > > > - panel->lcd_y - panel->lcd_vbp > > > > => timmings->ver_front_porch > > > > > > > > But the current driver is assuming it can exclude vertical front > > > > porch along with vertical sync values from total vertical timings, > > > > which resulting wrong start delay indeed wrong picture rendering > > > > in the panel. > > > > > > Same story here: which panel, which datasheet, which "wrong picture > > > rendering"? > > > > It's bananapi,s070wv20-ct16 DSI 2. as I said before, it is the same panel for both RGB and DSI, and ICN6211 bridge is converter for RGB-to-DSI. we don't have any specific programming or detailed datasheet from this except BSP DSI panel sequence along with BSP panel timings which are similar to RGB one. 3. wrong picture rendering is something sprightliness followed by colors jerks, which I couldn't explain it properly ie reason I mentioned some generic term for understanding. > > You're answering one out of three questions. > > > > > Example: timings, where it produces the issue. > > > > { > > > > .vdisplay = 600, > > > > .vsync_start = 600 + 12, > > > > .vsync_end = 600 + 12 + 2, > > > > .vtotal = 600 + 12 + 2 + 21, > > > > } > > > > > > Can you 100% trust those timings? > > > > ie. reason, I have given the Mainline timings [1]. The above timings > > are wrongly mentioned actual timings are from [1] > > You're still answering partially here. Those timings are working for > RGB, you have no proof that we need to make the same adjustments for > DSI. It is RGB to DSI bridge on the same panel, as I explained above and it would shared same timings. I can confirm or proved it from BSP panel timings which are working. indeed same timings are been in Mainline tree, we can trust them atleast. > > > > > It produces the desired start delay value as 19 but the correct working > > > > value should be 513. > > > > > > > > So, Fix it by computing proper video start delay. > > > > > > > > Fixes: 69006ef0ecb1 ("drm/sun4i: dsi: Change the start delay calculation") > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > --- > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 ++++++++-- > > > > 1 file changed, 8 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > index 62a508420227..8d6292c0158b 100644 > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > @@ -364,8 +364,14 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, > > > > static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, > > > > struct drm_display_mode *mode) > > > > { > > > > - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); > > > > - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; > > > > + u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay); > > > > + > > > > + /** > > > > + * BSP comment: > > > > + * put start_delay to tcon. set ready sync early to dramfreq, > > > > + * so set start_delay 1 > > > > + */ > > > > > > That doesn't make any sense to me... What does it mean? > > > > Which is meaning as above stated as "BSP comment" from here[2] > > It doesn't matter where you took it from. If you cannot explain what > happen, putting a random label that doesn't explain anything will not > help. I have no idea or document to refer why this 1 would be added. so I used same comment from BSP like many places on sun4i does. w/o this +1 the delay is computed to 512 which is not working and with this the desired delay is 513 which is perfectly working. If you have any idea on this, please share so-that I can add it in comment otherwise. Jagan.
Hi Maxime, On Thu, Mar 21, 2019 at 8:08 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > On Tue, Mar 19, 2019 at 3:55 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > On Mon, Mar 11, 2019 at 09:31:11PM +0530, Jagan Teki wrote: > > > On Mon, Mar 11, 2019 at 9:07 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > > > On Mon, Mar 11, 2019 at 07:06:23PM +0530, Jagan Teki wrote: > > > > > Vertical video start delay is computed by excluding vertical front > > > > > porch value from total vertical timings. > > > > > > > > > > This clearly confirmed from BSP code and here how it computed, > > > > > > > > > > (drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > > > > > u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp; > > > > > => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp) > > > > > => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y) > > > > > - panel->lcd_y - (panel->lcd_vbp) > > > > > => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y > > > > > - panel->lcd_y - panel->lcd_vbp > > > > > => timmings->ver_front_porch > > > > > > > > > > But the current driver is assuming it can exclude vertical front > > > > > porch along with vertical sync values from total vertical timings, > > > > > which resulting wrong start delay indeed wrong picture rendering > > > > > in the panel. > > > > > > > > Same story here: which panel, which datasheet, which "wrong picture > > > > rendering"? > > > > > > It's bananapi,s070wv20-ct16 DSI > > 2. as I said before, it is the same panel for both RGB and DSI, and > ICN6211 bridge is converter for RGB-to-DSI. we don't have any specific > programming or detailed datasheet from this except BSP DSI panel > sequence along with BSP panel timings which are similar to RGB one. > > 3. wrong picture rendering is something sprightliness followed by > colors jerks, which I couldn't explain it properly ie reason I > mentioned some generic term for understanding. > > > > > You're answering one out of three questions. > > > > > > > Example: timings, where it produces the issue. > > > > > { > > > > > .vdisplay = 600, > > > > > .vsync_start = 600 + 12, > > > > > .vsync_end = 600 + 12 + 2, > > > > > .vtotal = 600 + 12 + 2 + 21, > > > > > } > > > > > > > > Can you 100% trust those timings? > > > > > > ie. reason, I have given the Mainline timings [1]. The above timings > > > are wrongly mentioned actual timings are from [1] > > > > You're still answering partially here. Those timings are working for > > RGB, you have no proof that we need to make the same adjustments for > > DSI. > > It is RGB to DSI bridge on the same panel, as I explained above and it > would shared same timings. I can confirm or proved it from BSP panel > timings which are working. indeed same timings are been in Mainline > tree, we can trust them atleast. > > > > > > > > It produces the desired start delay value as 19 but the correct working > > > > > value should be 513. > > > > > > > > > > So, Fix it by computing proper video start delay. > > > > > > > > > > Fixes: 69006ef0ecb1 ("drm/sun4i: dsi: Change the start delay calculation") > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > --- > > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 ++++++++-- > > > > > 1 file changed, 8 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > index 62a508420227..8d6292c0158b 100644 > > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > @@ -364,8 +364,14 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, > > > > > static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, > > > > > struct drm_display_mode *mode) > > > > > { > > > > > - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); > > > > > - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; > > > > > + u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay); > > > > > + > > > > > + /** > > > > > + * BSP comment: > > > > > + * put start_delay to tcon. set ready sync early to dramfreq, > > > > > + * so set start_delay 1 > > > > > + */ > > > > > > > > That doesn't make any sense to me... What does it mean? > > > > > > Which is meaning as above stated as "BSP comment" from here[2] > > > > It doesn't matter where you took it from. If you cannot explain what > > happen, putting a random label that doesn't explain anything will not > > help. > > I have no idea or document to refer why this 1 would be added. so I > used same comment from BSP like many places on sun4i does. w/o this +1 > the delay is computed to 512 which is not working and with this the > desired delay is 513 which is perfectly working. > > If you have any idea on this, please share so-that I can add it in > comment otherwise. Any further comments?
On Thu, Mar 21, 2019 at 08:08:58PM +0530, Jagan Teki wrote: > On Tue, Mar 19, 2019 at 3:55 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > On Mon, Mar 11, 2019 at 09:31:11PM +0530, Jagan Teki wrote: > > > On Mon, Mar 11, 2019 at 9:07 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > > > On Mon, Mar 11, 2019 at 07:06:23PM +0530, Jagan Teki wrote: > > > > > Vertical video start delay is computed by excluding vertical front > > > > > porch value from total vertical timings. > > > > > > > > > > This clearly confirmed from BSP code and here how it computed, > > > > > > > > > > (drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > > > > > u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp; > > > > > => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp) > > > > > => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y) > > > > > - panel->lcd_y - (panel->lcd_vbp) > > > > > => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y > > > > > - panel->lcd_y - panel->lcd_vbp > > > > > => timmings->ver_front_porch > > > > > > > > > > But the current driver is assuming it can exclude vertical front > > > > > porch along with vertical sync values from total vertical timings, > > > > > which resulting wrong start delay indeed wrong picture rendering > > > > > in the panel. > > > > > > > > Same story here: which panel, which datasheet, which "wrong picture > > > > rendering"? > > > > > > It's bananapi,s070wv20-ct16 DSI > > 2. as I said before, it is the same panel for both RGB and DSI, and > ICN6211 bridge is converter for RGB-to-DSI. we don't have any specific > programming or detailed datasheet from this except BSP DSI panel > sequence along with BSP panel timings which are similar to RGB one. > > 3. wrong picture rendering is something sprightliness followed by > colors jerks, which I couldn't explain it properly ie reason I > mentioned some generic term for understanding. Some generic term doesn't explain anything, it barely makes a statement. > > You're answering one out of three questions. > > > > > > > Example: timings, where it produces the issue. > > > > > { > > > > > .vdisplay = 600, > > > > > .vsync_start = 600 + 12, > > > > > .vsync_end = 600 + 12 + 2, > > > > > .vtotal = 600 + 12 + 2 + 21, > > > > > } > > > > > > > > Can you 100% trust those timings? > > > > > > ie. reason, I have given the Mainline timings [1]. The above timings > > > are wrongly mentioned actual timings are from [1] > > > > You're still answering partially here. Those timings are working for > > RGB, you have no proof that we need to make the same adjustments for > > DSI. > > It is RGB to DSI bridge on the same panel, as I explained above and it > would shared same timings. I can confirm or proved it from BSP panel > timings which are working. indeed same timings are been in Mainline > tree, we can trust them atleast. You're missing the point. If the bridge has a different tolerance range to DSI timings for example, then you're screwed, even though the timings work in RGB. > > > > > It produces the desired start delay value as 19 but the correct working > > > > > value should be 513. > > > > > > > > > > So, Fix it by computing proper video start delay. > > > > > > > > > > Fixes: 69006ef0ecb1 ("drm/sun4i: dsi: Change the start delay calculation") > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > > --- > > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 ++++++++-- > > > > > 1 file changed, 8 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > index 62a508420227..8d6292c0158b 100644 > > > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > > > @@ -364,8 +364,14 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, > > > > > static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, > > > > > struct drm_display_mode *mode) > > > > > { > > > > > - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); > > > > > - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; > > > > > + u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay); > > > > > + > > > > > + /** > > > > > + * BSP comment: > > > > > + * put start_delay to tcon. set ready sync early to dramfreq, > > > > > + * so set start_delay 1 > > > > > + */ > > > > > > > > That doesn't make any sense to me... What does it mean? > > > > > > Which is meaning as above stated as "BSP comment" from here[2] > > > > It doesn't matter where you took it from. If you cannot explain what > > happen, putting a random label that doesn't explain anything will not > > help. > > I have no idea or document to refer why this 1 would be added. so I > used same comment from BSP like many places on sun4i does. w/o this +1 > the delay is computed to 512 which is not working and with this the > desired delay is 513 which is perfectly working. > > If you have any idea on this, please share so-that I can add it in > comment otherwise. You're the one with the panel, the issue and apparently a solution, and the whole problem we're having is because I don't have any idea on what that issue is precisely, and neither why your solution makes sense. I'm not sure I'm the best to write a comment in that situation. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 62a508420227..8d6292c0158b 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -364,8 +364,14 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, struct drm_display_mode *mode) { - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; + u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay); + + /** + * BSP comment: + * put start_delay to tcon. set ready sync early to dramfreq, + * so set start_delay 1 + */ + delay += 1; if (delay > mode->vtotal) delay = delay % mode->vtotal;
Vertical video start delay is computed by excluding vertical front porch value from total vertical timings. This clearly confirmed from BSP code and here how it computed, (drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) u32 vfp = panel->lcd_vt - panel->lcd_y - panel->lcd_vbp; => (panel->lcd_vt) - panel->lcd_y - (panel->lcd_vbp) => (timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y) - panel->lcd_y - (panel->lcd_vbp) => timmings->ver_front_porch + panel->lcd_vbp + panel->lcd_y - panel->lcd_y - panel->lcd_vbp => timmings->ver_front_porch But the current driver is assuming it can exclude vertical front porch along with vertical sync values from total vertical timings, which resulting wrong start delay indeed wrong picture rendering in the panel. Example: timings, where it produces the issue. { .vdisplay = 600, .vsync_start = 600 + 12, .vsync_end = 600 + 12 + 2, .vtotal = 600 + 12 + 2 + 21, } It produces the desired start delay value as 19 but the correct working value should be 513. So, Fix it by computing proper video start delay. Fixes: 69006ef0ecb1 ("drm/sun4i: dsi: Change the start delay calculation") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)