[v2,3/3] engicam: px30: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF

Message ID 20211115173821.104038-3-jagan@amarulasolutions.com
State New
Headers show
Series
  • [v2,1/3] arm64: dts: rockchip: px30: Move dmc into -u-boot.dtsi
Related show

Commit Message

Jagan Teki Nov. 15, 2021, 5:38 p.m. UTC
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/dts/Makefile                         |   1 +
 arch/arm/mach-rockchip/px30/Kconfig           |   8 ++
 board/engicam/px30_core/MAINTAINERS           |   6 +
 configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++
 4 files changed, 123 insertions(+)
 create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig

Comments

Kever Yang Dec. 24, 2021, 6:55 a.m. UTC | #1
On 2021/11/16 上午1:38, Jagan Teki wrote:
> PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
>
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
>
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
>
> PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
> 10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
>
> Add support for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
> Changes for v2:
> - none
>
>   arch/arm/dts/Makefile                         |   1 +
>   arch/arm/mach-rockchip/px30/Kconfig           |   8 ++
>   board/engicam/px30_core/MAINTAINERS           |   6 +
>   configs/px30-core-ctouch2-of10-px30_defconfig | 108 ++++++++++++++++++
>   4 files changed, 123 insertions(+)
>   create mode 100644 configs/px30-core-ctouch2-of10-px30_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 57a33d0bc4..95465d1dac 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -79,6 +79,7 @@ dtb-$(CONFIG_ROCKCHIP_PX30) += \
>   	px30-evb.dtb \
>   	px30-firefly.dtb \
>   	px30-engicam-px30-core-ctouch2.dtb \
> +	px30-engicam-px30-core-ctouch2-of10.dtb \
>   	px30-engicam-px30-core-edimm2.2.dtb \
>   	rk3326-odroid-go2.dtb
>   
> diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
> index aa5cc471ee..145bf3591f 100644
> --- a/arch/arm/mach-rockchip/px30/Kconfig
> +++ b/arch/arm/mach-rockchip/px30/Kconfig
> @@ -27,6 +27,14 @@ config TARGET_PX30_CORE
>   	  * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
>   	    PX30.Core C.TOUCH Carrier board.
>   
> +	  PX30.Core CTOUCH2-OF10:
> +	  * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
> +	  * CTOUCH2.0 is a general purpose Carrier board with capacitive
> +	    touch interface support.
> +	  * 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
> +	  * PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
> +            10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
> +
>   config ROCKCHIP_BOOT_MODE_REG
>   	default 0xff010200
>   
> diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
> index b87ca22207..77f0c2dba5 100644
> --- a/board/engicam/px30_core/MAINTAINERS
> +++ b/board/engicam/px30_core/MAINTAINERS
> @@ -4,6 +4,12 @@ M:	Suniel Mahesh <sunil@amarulasolutions.com>
>   S:	Maintained
>   F:	configs/px30-core-ctouch2-px30_defconfig
>   
> +PX30-Core-CTOUCH2.0-OF10
> +M:	Jagan Teki <jagan@amarulasolutions.com>
> +M:	Suniel Mahesh <sunil@amarulasolutions.com>
> +S:	Maintained
> +F:	configs/px30-core-ctouch2-of10-px30_defconfig
> +
>   PX30-Core-EDIMM2.2
>   M:	Jagan Teki <jagan@amarulasolutions.com>
>   M:	Suniel Mahesh <sunil@amarulasolutions.com>
> diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
> new file mode 100644
> index 0000000000..664c9774eb
> --- /dev/null
> +++ b/configs/px30-core-ctouch2-of10-px30_defconfig
> @@ -0,0 +1,108 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10"
> +CONFIG_SPL_TEXT_BASE=0x00000000
> +CONFIG_ROCKCHIP_PX30=y
> +CONFIG_TARGET_PX30_CORE=y
> +CONFIG_DEBUG_UART_CHANNEL=1
> +CONFIG_TPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF160000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
> +CONFIG_SYS_LOAD_ADDR=0x800800
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2-of10.dtb"
> +# CONFIG_CONSOLE_MUX is not set
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_MISC_INIT_R=y
> +CONFIG_SPL_BOOTROM_SUPPORT=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +# CONFIG_TPL_BANNER_PRINT is not set
> +CONFIG_SPL_ATF=y
> +# CONFIG_TPL_FRAMEWORK is not set
> +# CONFIG_CMD_BOOTD is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_LZMADEC is not set
> +# CONFIG_CMD_UNZIP is not set
> +CONFIG_CMD_GPT=y
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_ITEST is not set
> +# CONFIG_CMD_SETEXPR is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_ISO_PARTITION is not set
> +CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_BUF_SIZE=0x04000000
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MISC=y
> +CONFIG_ROCKCHIP_OTP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_TPL_RAM=y
> +CONFIG_ROCKCHIP_SDRAM_COMMON=y
> +CONFIG_DM_RESET=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_ROCKCHIP=y
> +# CONFIG_SPECIFY_CONSOLE_INDEX is not set
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_DEBUG_UART_SKIP_INIT=y
> +CONFIG_SOUND=y
> +CONFIG_SYSRESET=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_LCD=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_TPL_TINY_MEMSET=y
> +CONFIG_LZO=y
> +CONFIG_ERRNO_STR=y

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 57a33d0bc4..95465d1dac 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -79,6 +79,7 @@  dtb-$(CONFIG_ROCKCHIP_PX30) += \
 	px30-evb.dtb \
 	px30-firefly.dtb \
 	px30-engicam-px30-core-ctouch2.dtb \
+	px30-engicam-px30-core-ctouch2-of10.dtb \
 	px30-engicam-px30-core-edimm2.2.dtb \
 	rk3326-odroid-go2.dtb
 
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index aa5cc471ee..145bf3591f 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -27,6 +27,14 @@  config TARGET_PX30_CORE
 	  * PX30.Core needs to mount on top of CTOUCH2.0 for creating complete
 	    PX30.Core C.TOUCH Carrier board.
 
+	  PX30.Core CTOUCH2-OF10:
+	  * PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
+	  * CTOUCH2.0 is a general purpose Carrier board with capacitive
+	    touch interface support.
+	  * 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
+	  * PX30.Core needs to mount on top of C.TOUCH 2.0 carrier with pluged
+            10.1" OF for creating complete PX30.Core C.TOUCH 2.0 10.1" Open Frame.
+
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff010200
 
diff --git a/board/engicam/px30_core/MAINTAINERS b/board/engicam/px30_core/MAINTAINERS
index b87ca22207..77f0c2dba5 100644
--- a/board/engicam/px30_core/MAINTAINERS
+++ b/board/engicam/px30_core/MAINTAINERS
@@ -4,6 +4,12 @@  M:	Suniel Mahesh <sunil@amarulasolutions.com>
 S:	Maintained
 F:	configs/px30-core-ctouch2-px30_defconfig
 
+PX30-Core-CTOUCH2.0-OF10
+M:	Jagan Teki <jagan@amarulasolutions.com>
+M:	Suniel Mahesh <sunil@amarulasolutions.com>
+S:	Maintained
+F:	configs/px30-core-ctouch2-of10-px30_defconfig
+
 PX30-Core-EDIMM2.2
 M:	Jagan Teki <jagan@amarulasolutions.com>
 M:	Suniel Mahesh <sunil@amarulasolutions.com>
diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig
new file mode 100644
index 0000000000..664c9774eb
--- /dev/null
+++ b/configs/px30-core-ctouch2-of10-px30_defconfig
@@ -0,0 +1,108 @@ 
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10"
+CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_ROCKCHIP_PX30=y
+CONFIG_TARGET_PX30_CORE=y
+CONFIG_DEBUG_UART_CHANNEL=1
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF160000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+CONFIG_SYS_LOAD_ADDR=0x800800
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2-of10.dtb"
+# CONFIG_CONSOLE_MUX is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_MISC_INIT_R=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_SPL_ATF=y
+# CONFIG_TPL_FRAMEWORK is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_LZMADEC is not set
+# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_BUF_SIZE=0x04000000
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_ROCKCHIP_SDRAM_COMMON=y
+CONFIG_DM_RESET=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_ROCKCHIP=y
+# CONFIG_SPECIFY_CONSOLE_INDEX is not set
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SOUND=y
+CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_LCD=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y