[v4,02/12] drm: bridge: Add Samsung DSIM bridge driver

Message ID 20220829184031.1863663-3-jagan@amarulasolutions.com
State New
Headers show
Series
  • drm: bridge: Add Samsung MIPI DSIM bridge
Related show

Commit Message

Jagan Teki Aug. 29, 2022, 6:40 p.m. UTC
Samsung MIPI DSIM controller is common DSI IP that can be used in various
SoCs like Exynos, i.MX8M Mini/Nano.

In order to access this DSI controller between various platform SoCs,
the ideal way to incorporate this in the drm stack is via the drm bridge
driver.

This patch is trying to differentiate platform-specific and bridge driver
code and keep maintaining the exynos_drm_dsi.c code as platform-specific
glue code and samsung-dsim.c as a common bridge driver code.

- Exynos specific glue code is exynos specific te_irq, host_attach, and
  detach code along with conventional component_ops.

- Samsung DSIM is a bridge driver which is common across all platforms and
  the respective platform-specific glue will initialize at the end of the
  probe. The platform-specific operations and other glue calls will invoke
  on associate code areas.

v4:
* include Inki Dae in MAINTAINERS
* remove dsi_driver probe in exynos_drm_drv to support multi-arch build

v3:
* restore gpio related fixes
* restore proper bridge chain
* rework initialization issue
* fix header includes in proper way

v2:
* fixed exynos dsi driver conversion (Marek Szyprowski)
* updated commit message
* updated MAINTAINERS file

v1:
* don't maintain component_ops in bridge driver
* don't maintain platform glue code in bridge driver
* add platform-specific glue code and make a common bridge

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 MAINTAINERS                             |    9 +
 drivers/gpu/drm/bridge/Kconfig          |   12 +
 drivers/gpu/drm/bridge/Makefile         |    1 +
 drivers/gpu/drm/bridge/samsung-dsim.c   | 1686 ++++++++++++++++++++++
 drivers/gpu/drm/exynos/Kconfig          |    1 +
 drivers/gpu/drm/exynos/exynos_drm_drv.c |    3 -
 drivers/gpu/drm/exynos/exynos_drm_drv.h |    1 -
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 1715 +----------------------
 include/drm/bridge/samsung-dsim.h       |   99 ++
 9 files changed, 1868 insertions(+), 1659 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
 create mode 100644 include/drm/bridge/samsung-dsim.h

Comments

Marek Szyprowski Sept. 2, 2022, 10:47 a.m. UTC | #1
On 29.08.2022 20:40, Jagan Teki wrote:
> Samsung MIPI DSIM controller is common DSI IP that can be used in various
> SoCs like Exynos, i.MX8M Mini/Nano.
>
> In order to access this DSI controller between various platform SoCs,
> the ideal way to incorporate this in the drm stack is via the drm bridge
> driver.
>
> This patch is trying to differentiate platform-specific and bridge driver
> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
> glue code and samsung-dsim.c as a common bridge driver code.
>
> - Exynos specific glue code is exynos specific te_irq, host_attach, and
>    detach code along with conventional component_ops.
>
> - Samsung DSIM is a bridge driver which is common across all platforms and
>    the respective platform-specific glue will initialize at the end of the
>    probe. The platform-specific operations and other glue calls will invoke
>    on associate code areas.
>
> v4:
> * include Inki Dae in MAINTAINERS
> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build

This breaks Exynos DRM completely as the Exynos DRM driver is not able 
to wait until the DSI driver is probed and registered as component.

I will show how to rework this the way it is done in 
drivers/gpu/drm/exynos/exynos_dp.c and 
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...

> v3:
> * restore gpio related fixes
> * restore proper bridge chain
> * rework initialization issue
> * fix header includes in proper way
>
> v2:
> * fixed exynos dsi driver conversion (Marek Szyprowski)
> * updated commit message
> * updated MAINTAINERS file
>
> v1:
> * don't maintain component_ops in bridge driver
> * don't maintain platform glue code in bridge driver
> * add platform-specific glue code and make a common bridge
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>   MAINTAINERS                             |    9 +
>   drivers/gpu/drm/bridge/Kconfig          |   12 +
>   drivers/gpu/drm/bridge/Makefile         |    1 +
>   drivers/gpu/drm/bridge/samsung-dsim.c   | 1686 ++++++++++++++++++++++
>   drivers/gpu/drm/exynos/Kconfig          |    1 +
>   drivers/gpu/drm/exynos/exynos_drm_drv.c |    3 -
>   drivers/gpu/drm/exynos/exynos_drm_drv.h |    1 -
>   drivers/gpu/drm/exynos/exynos_drm_dsi.c | 1715 +----------------------
>   include/drm/bridge/samsung-dsim.h       |   99 ++
>   9 files changed, 1868 insertions(+), 1659 deletions(-)
>   create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
>   create mode 100644 include/drm/bridge/samsung-dsim.h
>
> ...

Best regards
Marek Szyprowski Sept. 5, 2022, 11:24 a.m. UTC | #2
Hi All,

On 02.09.2022 12:47, Marek Szyprowski wrote:
> On 29.08.2022 20:40, Jagan Teki wrote:
>> Samsung MIPI DSIM controller is common DSI IP that can be used in 
>> various
>> SoCs like Exynos, i.MX8M Mini/Nano.
>>
>> In order to access this DSI controller between various platform SoCs,
>> the ideal way to incorporate this in the drm stack is via the drm bridge
>> driver.
>>
>> This patch is trying to differentiate platform-specific and bridge 
>> driver
>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
>> glue code and samsung-dsim.c as a common bridge driver code.
>>
>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
>>    detach code along with conventional component_ops.
>>
>> - Samsung DSIM is a bridge driver which is common across all 
>> platforms and
>>    the respective platform-specific glue will initialize at the end 
>> of the
>>    probe. The platform-specific operations and other glue calls will 
>> invoke
>>    on associate code areas.
>>
>> v4:
>> * include Inki Dae in MAINTAINERS
>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
>
> This breaks Exynos DRM completely as the Exynos DRM driver is not able 
> to wait until the DSI driver is probed and registered as component.
>
> I will show how to rework this the way it is done in 
> drivers/gpu/drm/exynos/exynos_dp.c and 
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...

I've finally had some time to implement such approach, see 
https://github.com/mszyprow/linux/tree/v6.0-dsi-v4-reworked

If you want me to send the patches against your v4 patchset, let me 
know, but imho my changes are much more readable after squashing to the 
original patches.

Now the driver is fully multi-arch safe and ready for further 
extensions. I've removed the weak functions, reworked the way the 
plat_data is used (dropped the patch related to it) and restored 
exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel 
free to resend the above as v5 after testing on your hardware. At least 
it properly works now on all Exynos boards I have, both compiled into 
the kernel or as modules.

>
>> v3:
>> * restore gpio related fixes
>> * restore proper bridge chain
>> * rework initialization issue
>> * fix header includes in proper way
>>
>> v2:
>> * fixed exynos dsi driver conversion (Marek Szyprowski)
>> * updated commit message
>> * updated MAINTAINERS file
>>
>> v1:
>> * don't maintain component_ops in bridge driver
>> * don't maintain platform glue code in bridge driver
>> * add platform-specific glue code and make a common bridge
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>> ---
>>   MAINTAINERS                             |    9 +
>>   drivers/gpu/drm/bridge/Kconfig          |   12 +
>>   drivers/gpu/drm/bridge/Makefile         |    1 +
>>   drivers/gpu/drm/bridge/samsung-dsim.c   | 1686 ++++++++++++++++++++++
>>   drivers/gpu/drm/exynos/Kconfig          |    1 +
>>   drivers/gpu/drm/exynos/exynos_drm_drv.c |    3 -
>>   drivers/gpu/drm/exynos/exynos_drm_drv.h |    1 -
>>   drivers/gpu/drm/exynos/exynos_drm_dsi.c | 1715 +----------------------
>>   include/drm/bridge/samsung-dsim.h       |   99 ++
>>   9 files changed, 1868 insertions(+), 1659 deletions(-)
>>   create mode 100644 drivers/gpu/drm/bridge/samsung-dsim.c
>>   create mode 100644 include/drm/bridge/samsung-dsim.h
>>
>> ...
>
> Best regards

Best regards
Jagan Teki Sept. 6, 2022, 7:07 p.m. UTC | #3
On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi All,
>
> On 02.09.2022 12:47, Marek Szyprowski wrote:
> > On 29.08.2022 20:40, Jagan Teki wrote:
> >> Samsung MIPI DSIM controller is common DSI IP that can be used in
> >> various
> >> SoCs like Exynos, i.MX8M Mini/Nano.
> >>
> >> In order to access this DSI controller between various platform SoCs,
> >> the ideal way to incorporate this in the drm stack is via the drm bridge
> >> driver.
> >>
> >> This patch is trying to differentiate platform-specific and bridge
> >> driver
> >> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
> >> glue code and samsung-dsim.c as a common bridge driver code.
> >>
> >> - Exynos specific glue code is exynos specific te_irq, host_attach, and
> >>    detach code along with conventional component_ops.
> >>
> >> - Samsung DSIM is a bridge driver which is common across all
> >> platforms and
> >>    the respective platform-specific glue will initialize at the end
> >> of the
> >>    probe. The platform-specific operations and other glue calls will
> >> invoke
> >>    on associate code areas.
> >>
> >> v4:
> >> * include Inki Dae in MAINTAINERS
> >> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> >
> > This breaks Exynos DRM completely as the Exynos DRM driver is not able
> > to wait until the DSI driver is probed and registered as component.
> >
> > I will show how to rework this the way it is done in
> > drivers/gpu/drm/exynos/exynos_dp.c and
> > drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
>
> I've finally had some time to implement such approach, see
> https://github.com/mszyprow/linux/tree/v6.0-dsi-v4-reworked
>
> If you want me to send the patches against your v4 patchset, let me
> know, but imho my changes are much more readable after squashing to the
> original patches.
>
> Now the driver is fully multi-arch safe and ready for further
> extensions. I've removed the weak functions, reworked the way the
> plat_data is used (dropped the patch related to it) and restored
> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
> free to resend the above as v5 after testing on your hardware. At least
> it properly works now on all Exynos boards I have, both compiled into
> the kernel or as modules.

Thanks. I've seen the repo added on top of Dave patches - does it mean
these depends on Dave changes as well?

Jagan.
Marek Szyprowski Sept. 7, 2022, 10:04 a.m. UTC | #4
Hi Jagan,

On 06.09.2022 21:07, Jagan Teki wrote:
> On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 02.09.2022 12:47, Marek Szyprowski wrote:
>>> On 29.08.2022 20:40, Jagan Teki wrote:
>>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
>>>> various
>>>> SoCs like Exynos, i.MX8M Mini/Nano.
>>>>
>>>> In order to access this DSI controller between various platform SoCs,
>>>> the ideal way to incorporate this in the drm stack is via the drm bridge
>>>> driver.
>>>>
>>>> This patch is trying to differentiate platform-specific and bridge
>>>> driver
>>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
>>>> glue code and samsung-dsim.c as a common bridge driver code.
>>>>
>>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
>>>>     detach code along with conventional component_ops.
>>>>
>>>> - Samsung DSIM is a bridge driver which is common across all
>>>> platforms and
>>>>     the respective platform-specific glue will initialize at the end
>>>> of the
>>>>     probe. The platform-specific operations and other glue calls will
>>>> invoke
>>>>     on associate code areas.
>>>>
>>>> v4:
>>>> * include Inki Dae in MAINTAINERS
>>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
>>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
>>> to wait until the DSI driver is probed and registered as component.
>>>
>>> I will show how to rework this the way it is done in
>>> drivers/gpu/drm/exynos/exynos_dp.c and
>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
>> I've finally had some time to implement such approach, see
>> https://protect2.fireeye.com/v1/url?k=c5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375&q=1&e=489b94d4-84fb-408e-b679-a8d27acf2930&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked
>>
>> If you want me to send the patches against your v4 patchset, let me
>> know, but imho my changes are much more readable after squashing to the
>> original patches.
>>
>> Now the driver is fully multi-arch safe and ready for further
>> extensions. I've removed the weak functions, reworked the way the
>> plat_data is used (dropped the patch related to it) and restored
>> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
>> free to resend the above as v5 after testing on your hardware. At least
>> it properly works now on all Exynos boards I have, both compiled into
>> the kernel or as modules.
> Thanks. I've seen the repo added on top of Dave patches - does it mean
> these depends on Dave changes as well?

Yes and no. My rework doesn't change anything with this dependency. It 
comes from my patch "drm: exynos: dsi: Restore proper bridge chain 
order" already included in your series (patch #1). Without it exynos-dsi 
driver hacks the list of bridges to ensure the order of pre_enable calls 
needed for proper operation. This works somehow with DSI panels on my 
test systems, but it has been reported that it doesn't work with a bit 
more complex display pipelines. Only that patch depends on the Dave's 
patches. If you remove it, you would need to adjust the code in the 
exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be 
better to keep it and merge Dave's patches together with dsi changes, as 
they are the first real client of it.

Best regards
Frieder Schrempf Sept. 12, 2022, 2:52 p.m. UTC | #5
Hi Jagan, Marek,

Am 07.09.22 um 12:04 schrieb Marek Szyprowski:
> Hi Jagan,
> 
> On 06.09.2022 21:07, Jagan Teki wrote:
>> On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
>> <m.szyprowski@samsung.com> wrote:
>>> On 02.09.2022 12:47, Marek Szyprowski wrote:
>>>> On 29.08.2022 20:40, Jagan Teki wrote:
>>>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
>>>>> various
>>>>> SoCs like Exynos, i.MX8M Mini/Nano.
>>>>>
>>>>> In order to access this DSI controller between various platform SoCs,
>>>>> the ideal way to incorporate this in the drm stack is via the drm bridge
>>>>> driver.
>>>>>
>>>>> This patch is trying to differentiate platform-specific and bridge
>>>>> driver
>>>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
>>>>> glue code and samsung-dsim.c as a common bridge driver code.
>>>>>
>>>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
>>>>>     detach code along with conventional component_ops.
>>>>>
>>>>> - Samsung DSIM is a bridge driver which is common across all
>>>>> platforms and
>>>>>     the respective platform-specific glue will initialize at the end
>>>>> of the
>>>>>     probe. The platform-specific operations and other glue calls will
>>>>> invoke
>>>>>     on associate code areas.
>>>>>
>>>>> v4:
>>>>> * include Inki Dae in MAINTAINERS
>>>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
>>>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
>>>> to wait until the DSI driver is probed and registered as component.
>>>>
>>>> I will show how to rework this the way it is done in
>>>> drivers/gpu/drm/exynos/exynos_dp.c and
>>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
>>> I've finally had some time to implement such approach, see
>>> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fprotect2.fireeye.com%2Fv1%2Furl%3Fk%3Dc5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375%26q%3D1%26e%3D489b94d4-84fb-408e-b679-a8d27acf2930%26u%3Dhttps%253A%252F%252Fgithub.com%252Fmszyprow%252Flinux%252Ftree%252Fv6.0-dsi-v4-reworked&amp;data=05%7C01%7Cfrieder.schrempf%40kontron.de%7C8ed9bd90703b48c9d43708da90b86876%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637981418959345104%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=vLwOMBbdNo1C5x%2BESY3SU%2FwaYKBmAgIyafLOLmd3BlM%3D&amp;reserved=0
>>>
>>> If you want me to send the patches against your v4 patchset, let me
>>> know, but imho my changes are much more readable after squashing to the
>>> original patches.
>>>
>>> Now the driver is fully multi-arch safe and ready for further
>>> extensions. I've removed the weak functions, reworked the way the
>>> plat_data is used (dropped the patch related to it) and restored
>>> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
>>> free to resend the above as v5 after testing on your hardware. At least
>>> it properly works now on all Exynos boards I have, both compiled into
>>> the kernel or as modules.
>> Thanks. I've seen the repo added on top of Dave patches - does it mean
>> these depends on Dave changes as well?
> 
> Yes and no. My rework doesn't change anything with this dependency. It 
> comes from my patch "drm: exynos: dsi: Restore proper bridge chain 
> order" already included in your series (patch #1). Without it exynos-dsi 
> driver hacks the list of bridges to ensure the order of pre_enable calls 
> needed for proper operation. This works somehow with DSI panels on my 
> test systems, but it has been reported that it doesn't work with a bit 
> more complex display pipelines. Only that patch depends on the Dave's 
> patches. If you remove it, you would need to adjust the code in the 
> exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be 
> better to keep it and merge Dave's patches together with dsi changes, as 
> they are the first real client of it.

I tried to test Jagan's v4 on our Kontron BL i.MX8MM with SN65DSI84 LVDS
bridge and it didn't work due to driver dependency issues.

Instead trying Marek's branch rebased to 6.0-rc4 and including the
necessary DT changes from Jagan's v4 looks good and produces an image on
the display.

Only one thing caused problems: In Jagan's patch for the LCDIF node [1]
there's a typo (missing 's') in the assigned-clock-rates property.
Without fixing this the display doesn't work.

Jagan, can you come up with a v5 including Marek's fixes?
And if you like, I think you could also start sending the DT changes for
i.MX8MM, so we can start reviewing/testing them?

Thanks
Frieder

[1]:
https://github.com/openedev/kernel/commit/89a6252cec47f3593d4f2b7ea3132f4745c4fdb3
Jagan Teki Sept. 13, 2022, 5:29 p.m. UTC | #6
On Wed, Sep 7, 2022 at 3:34 PM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Jagan,
>
> On 06.09.2022 21:07, Jagan Teki wrote:
> > On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> On 02.09.2022 12:47, Marek Szyprowski wrote:
> >>> On 29.08.2022 20:40, Jagan Teki wrote:
> >>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
> >>>> various
> >>>> SoCs like Exynos, i.MX8M Mini/Nano.
> >>>>
> >>>> In order to access this DSI controller between various platform SoCs,
> >>>> the ideal way to incorporate this in the drm stack is via the drm bridge
> >>>> driver.
> >>>>
> >>>> This patch is trying to differentiate platform-specific and bridge
> >>>> driver
> >>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
> >>>> glue code and samsung-dsim.c as a common bridge driver code.
> >>>>
> >>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
> >>>>     detach code along with conventional component_ops.
> >>>>
> >>>> - Samsung DSIM is a bridge driver which is common across all
> >>>> platforms and
> >>>>     the respective platform-specific glue will initialize at the end
> >>>> of the
> >>>>     probe. The platform-specific operations and other glue calls will
> >>>> invoke
> >>>>     on associate code areas.
> >>>>
> >>>> v4:
> >>>> * include Inki Dae in MAINTAINERS
> >>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> >>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
> >>> to wait until the DSI driver is probed and registered as component.
> >>>
> >>> I will show how to rework this the way it is done in
> >>> drivers/gpu/drm/exynos/exynos_dp.c and
> >>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
> >> I've finally had some time to implement such approach, see
> >> https://protect2.fireeye.com/v1/url?k=c5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375&q=1&e=489b94d4-84fb-408e-b679-a8d27acf2930&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked
> >>
> >> If you want me to send the patches against your v4 patchset, let me
> >> know, but imho my changes are much more readable after squashing to the
> >> original patches.
> >>
> >> Now the driver is fully multi-arch safe and ready for further
> >> extensions. I've removed the weak functions, reworked the way the
> >> plat_data is used (dropped the patch related to it) and restored
> >> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
> >> free to resend the above as v5 after testing on your hardware. At least
> >> it properly works now on all Exynos boards I have, both compiled into
> >> the kernel or as modules.
> > Thanks. I've seen the repo added on top of Dave patches - does it mean
> > these depends on Dave changes as well?
>
> Yes and no. My rework doesn't change anything with this dependency. It
> comes from my patch "drm: exynos: dsi: Restore proper bridge chain
> order" already included in your series (patch #1). Without it exynos-dsi
> driver hacks the list of bridges to ensure the order of pre_enable calls
> needed for proper operation. This works somehow with DSI panels on my
> test systems, but it has been reported that it doesn't work with a bit
> more complex display pipelines. Only that patch depends on the Dave's
> patches. If you remove it, you would need to adjust the code in the
> exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be
> better to keep it and merge Dave's patches together with dsi changes, as
> they are the first real client of it.

I think the Dave patches especially "drm/bridge: Introduce
pre_enable_upstream_first to alter bridge init order" seems not 100%
relevant to this series as they affect bridge chain call flow
globally. Having a separate series for that makes sense to me. I'm
sending v5 by excluding those parts.

Jagan.
Marek Szyprowski Sept. 14, 2022, 9:21 a.m. UTC | #7
Hi Jagan,

On 13.09.2022 19:29, Jagan Teki wrote:
> On Wed, Sep 7, 2022 at 3:34 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 06.09.2022 21:07, Jagan Teki wrote:
>>> On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
>>> <m.szyprowski@samsung.com> wrote:
>>>> On 02.09.2022 12:47, Marek Szyprowski wrote:
>>>>> On 29.08.2022 20:40, Jagan Teki wrote:
>>>>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
>>>>>> various
>>>>>> SoCs like Exynos, i.MX8M Mini/Nano.
>>>>>>
>>>>>> In order to access this DSI controller between various platform SoCs,
>>>>>> the ideal way to incorporate this in the drm stack is via the drm bridge
>>>>>> driver.
>>>>>>
>>>>>> This patch is trying to differentiate platform-specific and bridge
>>>>>> driver
>>>>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
>>>>>> glue code and samsung-dsim.c as a common bridge driver code.
>>>>>>
>>>>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
>>>>>>      detach code along with conventional component_ops.
>>>>>>
>>>>>> - Samsung DSIM is a bridge driver which is common across all
>>>>>> platforms and
>>>>>>      the respective platform-specific glue will initialize at the end
>>>>>> of the
>>>>>>      probe. The platform-specific operations and other glue calls will
>>>>>> invoke
>>>>>>      on associate code areas.
>>>>>>
>>>>>> v4:
>>>>>> * include Inki Dae in MAINTAINERS
>>>>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
>>>>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
>>>>> to wait until the DSI driver is probed and registered as component.
>>>>>
>>>>> I will show how to rework this the way it is done in
>>>>> drivers/gpu/drm/exynos/exynos_dp.c and
>>>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
>>>> I've finally had some time to implement such approach, see
>>>> https://protect2.fireeye.com/v1/url?k=c5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375&q=1&e=489b94d4-84fb-408e-b679-a8d27acf2930&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked
>>>>
>>>> If you want me to send the patches against your v4 patchset, let me
>>>> know, but imho my changes are much more readable after squashing to the
>>>> original patches.
>>>>
>>>> Now the driver is fully multi-arch safe and ready for further
>>>> extensions. I've removed the weak functions, reworked the way the
>>>> plat_data is used (dropped the patch related to it) and restored
>>>> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
>>>> free to resend the above as v5 after testing on your hardware. At least
>>>> it properly works now on all Exynos boards I have, both compiled into
>>>> the kernel or as modules.
>>> Thanks. I've seen the repo added on top of Dave patches - does it mean
>>> these depends on Dave changes as well?
>> Yes and no. My rework doesn't change anything with this dependency. It
>> comes from my patch "drm: exynos: dsi: Restore proper bridge chain
>> order" already included in your series (patch #1). Without it exynos-dsi
>> driver hacks the list of bridges to ensure the order of pre_enable calls
>> needed for proper operation. This works somehow with DSI panels on my
>> test systems, but it has been reported that it doesn't work with a bit
>> more complex display pipelines. Only that patch depends on the Dave's
>> patches. If you remove it, you would need to adjust the code in the
>> exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be
>> better to keep it and merge Dave's patches together with dsi changes, as
>> they are the first real client of it.
> I think the Dave patches especially "drm/bridge: Introduce
> pre_enable_upstream_first to alter bridge init order" seems not 100%
> relevant to this series as they affect bridge chain call flow
> globally. Having a separate series for that makes sense to me. I'm
> sending v5 by excluding those parts.

If so then drop the "drm: exynos: dsi: Restore proper bridge chain 
order" patch and adjust code respectively in samsung-dsim.c. Without the 
Dave's patches, that one doesn't make sense.

Best regards
Jagan Teki Sept. 14, 2022, 9:39 a.m. UTC | #8
On Wed, Sep 14, 2022 at 2:51 PM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Jagan,
>
> On 13.09.2022 19:29, Jagan Teki wrote:
> > On Wed, Sep 7, 2022 at 3:34 PM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> On 06.09.2022 21:07, Jagan Teki wrote:
> >>> On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
> >>> <m.szyprowski@samsung.com> wrote:
> >>>> On 02.09.2022 12:47, Marek Szyprowski wrote:
> >>>>> On 29.08.2022 20:40, Jagan Teki wrote:
> >>>>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
> >>>>>> various
> >>>>>> SoCs like Exynos, i.MX8M Mini/Nano.
> >>>>>>
> >>>>>> In order to access this DSI controller between various platform SoCs,
> >>>>>> the ideal way to incorporate this in the drm stack is via the drm bridge
> >>>>>> driver.
> >>>>>>
> >>>>>> This patch is trying to differentiate platform-specific and bridge
> >>>>>> driver
> >>>>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
> >>>>>> glue code and samsung-dsim.c as a common bridge driver code.
> >>>>>>
> >>>>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
> >>>>>>      detach code along with conventional component_ops.
> >>>>>>
> >>>>>> - Samsung DSIM is a bridge driver which is common across all
> >>>>>> platforms and
> >>>>>>      the respective platform-specific glue will initialize at the end
> >>>>>> of the
> >>>>>>      probe. The platform-specific operations and other glue calls will
> >>>>>> invoke
> >>>>>>      on associate code areas.
> >>>>>>
> >>>>>> v4:
> >>>>>> * include Inki Dae in MAINTAINERS
> >>>>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> >>>>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
> >>>>> to wait until the DSI driver is probed and registered as component.
> >>>>>
> >>>>> I will show how to rework this the way it is done in
> >>>>> drivers/gpu/drm/exynos/exynos_dp.c and
> >>>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
> >>>> I've finally had some time to implement such approach, see
> >>>> https://protect2.fireeye.com/v1/url?k=c5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375&q=1&e=489b94d4-84fb-408e-b679-a8d27acf2930&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked
> >>>>
> >>>> If you want me to send the patches against your v4 patchset, let me
> >>>> know, but imho my changes are much more readable after squashing to the
> >>>> original patches.
> >>>>
> >>>> Now the driver is fully multi-arch safe and ready for further
> >>>> extensions. I've removed the weak functions, reworked the way the
> >>>> plat_data is used (dropped the patch related to it) and restored
> >>>> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
> >>>> free to resend the above as v5 after testing on your hardware. At least
> >>>> it properly works now on all Exynos boards I have, both compiled into
> >>>> the kernel or as modules.
> >>> Thanks. I've seen the repo added on top of Dave patches - does it mean
> >>> these depends on Dave changes as well?
> >> Yes and no. My rework doesn't change anything with this dependency. It
> >> comes from my patch "drm: exynos: dsi: Restore proper bridge chain
> >> order" already included in your series (patch #1). Without it exynos-dsi
> >> driver hacks the list of bridges to ensure the order of pre_enable calls
> >> needed for proper operation. This works somehow with DSI panels on my
> >> test systems, but it has been reported that it doesn't work with a bit
> >> more complex display pipelines. Only that patch depends on the Dave's
> >> patches. If you remove it, you would need to adjust the code in the
> >> exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be
> >> better to keep it and merge Dave's patches together with dsi changes, as
> >> they are the first real client of it.
> > I think the Dave patches especially "drm/bridge: Introduce
> > pre_enable_upstream_first to alter bridge init order" seems not 100%
> > relevant to this series as they affect bridge chain call flow
> > globally. Having a separate series for that makes sense to me. I'm
> > sending v5 by excluding those parts.
>
> If so then drop the "drm: exynos: dsi: Restore proper bridge chain
> order" patch and adjust code respectively in samsung-dsim.c. Without the
> Dave's patches, that one doesn't make sense.

Doesn't it break Exynos?

Jagan.
Marek Szyprowski Sept. 16, 2022, 8:28 a.m. UTC | #9
Hi Jagan,

On 14.09.2022 11:39, Jagan Teki wrote:
> On Wed, Sep 14, 2022 at 2:51 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 13.09.2022 19:29, Jagan Teki wrote:
>>> On Wed, Sep 7, 2022 at 3:34 PM Marek Szyprowski
>>> <m.szyprowski@samsung.com> wrote:
>>>> On 06.09.2022 21:07, Jagan Teki wrote:
>>>>> On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
>>>>> <m.szyprowski@samsung.com> wrote:
>>>>>> On 02.09.2022 12:47, Marek Szyprowski wrote:
>>>>>>> On 29.08.2022 20:40, Jagan Teki wrote:
>>>>>>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
>>>>>>>> various
>>>>>>>> SoCs like Exynos, i.MX8M Mini/Nano.
>>>>>>>>
>>>>>>>> In order to access this DSI controller between various platform SoCs,
>>>>>>>> the ideal way to incorporate this in the drm stack is via the drm bridge
>>>>>>>> driver.
>>>>>>>>
>>>>>>>> This patch is trying to differentiate platform-specific and bridge
>>>>>>>> driver
>>>>>>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
>>>>>>>> glue code and samsung-dsim.c as a common bridge driver code.
>>>>>>>>
>>>>>>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
>>>>>>>>       detach code along with conventional component_ops.
>>>>>>>>
>>>>>>>> - Samsung DSIM is a bridge driver which is common across all
>>>>>>>> platforms and
>>>>>>>>       the respective platform-specific glue will initialize at the end
>>>>>>>> of the
>>>>>>>>       probe. The platform-specific operations and other glue calls will
>>>>>>>> invoke
>>>>>>>>       on associate code areas.
>>>>>>>>
>>>>>>>> v4:
>>>>>>>> * include Inki Dae in MAINTAINERS
>>>>>>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
>>>>>>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
>>>>>>> to wait until the DSI driver is probed and registered as component.
>>>>>>>
>>>>>>> I will show how to rework this the way it is done in
>>>>>>> drivers/gpu/drm/exynos/exynos_dp.c and
>>>>>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
>>>>>> I've finally had some time to implement such approach, see
>>>>>> https://protect2.fireeye.com/v1/url?k=c5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375&q=1&e=489b94d4-84fb-408e-b679-a8d27acf2930&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked
>>>>>>
>>>>>> If you want me to send the patches against your v4 patchset, let me
>>>>>> know, but imho my changes are much more readable after squashing to the
>>>>>> original patches.
>>>>>>
>>>>>> Now the driver is fully multi-arch safe and ready for further
>>>>>> extensions. I've removed the weak functions, reworked the way the
>>>>>> plat_data is used (dropped the patch related to it) and restored
>>>>>> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
>>>>>> free to resend the above as v5 after testing on your hardware. At least
>>>>>> it properly works now on all Exynos boards I have, both compiled into
>>>>>> the kernel or as modules.
>>>>> Thanks. I've seen the repo added on top of Dave patches - does it mean
>>>>> these depends on Dave changes as well?
>>>> Yes and no. My rework doesn't change anything with this dependency. It
>>>> comes from my patch "drm: exynos: dsi: Restore proper bridge chain
>>>> order" already included in your series (patch #1). Without it exynos-dsi
>>>> driver hacks the list of bridges to ensure the order of pre_enable calls
>>>> needed for proper operation. This works somehow with DSI panels on my
>>>> test systems, but it has been reported that it doesn't work with a bit
>>>> more complex display pipelines. Only that patch depends on the Dave's
>>>> patches. If you remove it, you would need to adjust the code in the
>>>> exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be
>>>> better to keep it and merge Dave's patches together with dsi changes, as
>>>> they are the first real client of it.
>>> I think the Dave patches especially "drm/bridge: Introduce
>>> pre_enable_upstream_first to alter bridge init order" seems not 100%
>>> relevant to this series as they affect bridge chain call flow
>>> globally. Having a separate series for that makes sense to me. I'm
>>> sending v5 by excluding those parts.
>> If so then drop the "drm: exynos: dsi: Restore proper bridge chain
>> order" patch and adjust code respectively in samsung-dsim.c. Without the
>> Dave's patches, that one doesn't make sense.
> Doesn't it break Exynos?

No it won't. Lack of the "drm: exynos: dsi: Restore proper bridge chain 
order" patch doesn't change much against the current state of the driver.

Here is my rework of your v4 patchset without the mentioned patch and 
Dave's patches:

https://github.com/mszyprow/linux/tree/v6.0-dsi-v4-reworked-minimal

Best regards
Jagan Teki Sept. 16, 2022, 10:21 a.m. UTC | #10
On Fri, Sep 16, 2022 at 1:58 PM Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
>
> Hi Jagan,
>
> On 14.09.2022 11:39, Jagan Teki wrote:
> > On Wed, Sep 14, 2022 at 2:51 PM Marek Szyprowski
> > <m.szyprowski@samsung.com> wrote:
> >> On 13.09.2022 19:29, Jagan Teki wrote:
> >>> On Wed, Sep 7, 2022 at 3:34 PM Marek Szyprowski
> >>> <m.szyprowski@samsung.com> wrote:
> >>>> On 06.09.2022 21:07, Jagan Teki wrote:
> >>>>> On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
> >>>>> <m.szyprowski@samsung.com> wrote:
> >>>>>> On 02.09.2022 12:47, Marek Szyprowski wrote:
> >>>>>>> On 29.08.2022 20:40, Jagan Teki wrote:
> >>>>>>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
> >>>>>>>> various
> >>>>>>>> SoCs like Exynos, i.MX8M Mini/Nano.
> >>>>>>>>
> >>>>>>>> In order to access this DSI controller between various platform SoCs,
> >>>>>>>> the ideal way to incorporate this in the drm stack is via the drm bridge
> >>>>>>>> driver.
> >>>>>>>>
> >>>>>>>> This patch is trying to differentiate platform-specific and bridge
> >>>>>>>> driver
> >>>>>>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
> >>>>>>>> glue code and samsung-dsim.c as a common bridge driver code.
> >>>>>>>>
> >>>>>>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
> >>>>>>>>       detach code along with conventional component_ops.
> >>>>>>>>
> >>>>>>>> - Samsung DSIM is a bridge driver which is common across all
> >>>>>>>> platforms and
> >>>>>>>>       the respective platform-specific glue will initialize at the end
> >>>>>>>> of the
> >>>>>>>>       probe. The platform-specific operations and other glue calls will
> >>>>>>>> invoke
> >>>>>>>>       on associate code areas.
> >>>>>>>>
> >>>>>>>> v4:
> >>>>>>>> * include Inki Dae in MAINTAINERS
> >>>>>>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> >>>>>>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
> >>>>>>> to wait until the DSI driver is probed and registered as component.
> >>>>>>>
> >>>>>>> I will show how to rework this the way it is done in
> >>>>>>> drivers/gpu/drm/exynos/exynos_dp.c and
> >>>>>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
> >>>>>> I've finally had some time to implement such approach, see
> >>>>>> https://protect2.fireeye.com/v1/url?k=c5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375&q=1&e=489b94d4-84fb-408e-b679-a8d27acf2930&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked
> >>>>>>
> >>>>>> If you want me to send the patches against your v4 patchset, let me
> >>>>>> know, but imho my changes are much more readable after squashing to the
> >>>>>> original patches.
> >>>>>>
> >>>>>> Now the driver is fully multi-arch safe and ready for further
> >>>>>> extensions. I've removed the weak functions, reworked the way the
> >>>>>> plat_data is used (dropped the patch related to it) and restored
> >>>>>> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
> >>>>>> free to resend the above as v5 after testing on your hardware. At least
> >>>>>> it properly works now on all Exynos boards I have, both compiled into
> >>>>>> the kernel or as modules.
> >>>>> Thanks. I've seen the repo added on top of Dave patches - does it mean
> >>>>> these depends on Dave changes as well?
> >>>> Yes and no. My rework doesn't change anything with this dependency. It
> >>>> comes from my patch "drm: exynos: dsi: Restore proper bridge chain
> >>>> order" already included in your series (patch #1). Without it exynos-dsi
> >>>> driver hacks the list of bridges to ensure the order of pre_enable calls
> >>>> needed for proper operation. This works somehow with DSI panels on my
> >>>> test systems, but it has been reported that it doesn't work with a bit
> >>>> more complex display pipelines. Only that patch depends on the Dave's
> >>>> patches. If you remove it, you would need to adjust the code in the
> >>>> exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be
> >>>> better to keep it and merge Dave's patches together with dsi changes, as
> >>>> they are the first real client of it.
> >>> I think the Dave patches especially "drm/bridge: Introduce
> >>> pre_enable_upstream_first to alter bridge init order" seems not 100%
> >>> relevant to this series as they affect bridge chain call flow
> >>> globally. Having a separate series for that makes sense to me. I'm
> >>> sending v5 by excluding those parts.
> >> If so then drop the "drm: exynos: dsi: Restore proper bridge chain
> >> order" patch and adjust code respectively in samsung-dsim.c. Without the
> >> Dave's patches, that one doesn't make sense.
> > Doesn't it break Exynos?
>
> No it won't. Lack of the "drm: exynos: dsi: Restore proper bridge chain
> order" patch doesn't change much against the current state of the driver.
>
> Here is my rework of your v4 patchset without the mentioned patch and
> Dave's patches:
>
> https://github.com/mszyprow/linux/tree/v6.0-dsi-v4-reworked-minimal

We have one problem with getting bus format from previous bridge if we
pass NULL in bridge_func.attach()
https://github.com/mszyprow/linux/commit/0fa57e33b3bf866efc4c17ab20eec28d6e07b3e9#diff-3fe873f1ada5f1dfcf2a50ac114bdab3ea7b026d12278648ca40809d3fa1a331R1321

Booting the video as it assigns default bus format if the previous bus
format is unknown.

[    1.635984] samsung-dsim 32e10000.dsi:
[drm:samsung_dsim_host_attach] Attached sn65dsi83 device
[    1.648067] [drm] Initialized mxsfb-drm 1.0.0 20160824 for
32e00000.lcdif on minor 0
[    1.658726] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc]
using ADMA
[    1.681893] sn65dsi83 3-002c: Unsupported LVDS bus format 0x100a,
please check output bridge driver. Falling back to SPWG24.

Does passing the bridge to drm_bridge_attach is working on your platform?
return drm_bridge_attach(bridge->encoder, dsi->out_bridge, bridge, flags);

Thanks,
Jagan.
Marek Szyprowski Sept. 19, 2022, 6:22 a.m. UTC | #11
Hi Jagan,

On 16.09.2022 12:21, Jagan Teki wrote:
> On Fri, Sep 16, 2022 at 1:58 PM Marek Szyprowski
> <m.szyprowski@samsung.com> wrote:
>> On 14.09.2022 11:39, Jagan Teki wrote:
>>> On Wed, Sep 14, 2022 at 2:51 PM Marek Szyprowski
>>> <m.szyprowski@samsung.com> wrote:
>>>> On 13.09.2022 19:29, Jagan Teki wrote:
>>>>> On Wed, Sep 7, 2022 at 3:34 PM Marek Szyprowski
>>>>> <m.szyprowski@samsung.com> wrote:
>>>>>> On 06.09.2022 21:07, Jagan Teki wrote:
>>>>>>> On Mon, Sep 5, 2022 at 4:54 PM Marek Szyprowski
>>>>>>> <m.szyprowski@samsung.com> wrote:
>>>>>>>> On 02.09.2022 12:47, Marek Szyprowski wrote:
>>>>>>>>> On 29.08.2022 20:40, Jagan Teki wrote:
>>>>>>>>>> Samsung MIPI DSIM controller is common DSI IP that can be used in
>>>>>>>>>> various
>>>>>>>>>> SoCs like Exynos, i.MX8M Mini/Nano.
>>>>>>>>>>
>>>>>>>>>> In order to access this DSI controller between various platform SoCs,
>>>>>>>>>> the ideal way to incorporate this in the drm stack is via the drm bridge
>>>>>>>>>> driver.
>>>>>>>>>>
>>>>>>>>>> This patch is trying to differentiate platform-specific and bridge
>>>>>>>>>> driver
>>>>>>>>>> code and keep maintaining the exynos_drm_dsi.c code as platform-specific
>>>>>>>>>> glue code and samsung-dsim.c as a common bridge driver code.
>>>>>>>>>>
>>>>>>>>>> - Exynos specific glue code is exynos specific te_irq, host_attach, and
>>>>>>>>>>        detach code along with conventional component_ops.
>>>>>>>>>>
>>>>>>>>>> - Samsung DSIM is a bridge driver which is common across all
>>>>>>>>>> platforms and
>>>>>>>>>>        the respective platform-specific glue will initialize at the end
>>>>>>>>>> of the
>>>>>>>>>>        probe. The platform-specific operations and other glue calls will
>>>>>>>>>> invoke
>>>>>>>>>>        on associate code areas.
>>>>>>>>>>
>>>>>>>>>> v4:
>>>>>>>>>> * include Inki Dae in MAINTAINERS
>>>>>>>>>> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
>>>>>>>>> This breaks Exynos DRM completely as the Exynos DRM driver is not able
>>>>>>>>> to wait until the DSI driver is probed and registered as component.
>>>>>>>>>
>>>>>>>>> I will show how to rework this the way it is done in
>>>>>>>>> drivers/gpu/drm/exynos/exynos_dp.c and
>>>>>>>>> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c soon...
>>>>>>>> I've finally had some time to implement such approach, see
>>>>>>>> https://protect2.fireeye.com/v1/url?k=c5d024d9-a4ab8e4e-c5d1af96-74fe4860001d-625a8324a9797375&q=1&e=489b94d4-84fb-408e-b679-a8d27acf2930&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked
>>>>>>>>
>>>>>>>> If you want me to send the patches against your v4 patchset, let me
>>>>>>>> know, but imho my changes are much more readable after squashing to the
>>>>>>>> original patches.
>>>>>>>>
>>>>>>>> Now the driver is fully multi-arch safe and ready for further
>>>>>>>> extensions. I've removed the weak functions, reworked the way the
>>>>>>>> plat_data is used (dropped the patch related to it) and restored
>>>>>>>> exynos-dsi driver as a part of the Exynos DRM drivers/subsystem. Feel
>>>>>>>> free to resend the above as v5 after testing on your hardware. At least
>>>>>>>> it properly works now on all Exynos boards I have, both compiled into
>>>>>>>> the kernel or as modules.
>>>>>>> Thanks. I've seen the repo added on top of Dave patches - does it mean
>>>>>>> these depends on Dave changes as well?
>>>>>> Yes and no. My rework doesn't change anything with this dependency. It
>>>>>> comes from my patch "drm: exynos: dsi: Restore proper bridge chain
>>>>>> order" already included in your series (patch #1). Without it exynos-dsi
>>>>>> driver hacks the list of bridges to ensure the order of pre_enable calls
>>>>>> needed for proper operation. This works somehow with DSI panels on my
>>>>>> test systems, but it has been reported that it doesn't work with a bit
>>>>>> more complex display pipelines. Only that patch depends on the Dave's
>>>>>> patches. If you remove it, you would need to adjust the code in the
>>>>>> exynos_drm_dsi.c and samsung-dsim.c respectively. imho it would be
>>>>>> better to keep it and merge Dave's patches together with dsi changes, as
>>>>>> they are the first real client of it.
>>>>> I think the Dave patches especially "drm/bridge: Introduce
>>>>> pre_enable_upstream_first to alter bridge init order" seems not 100%
>>>>> relevant to this series as they affect bridge chain call flow
>>>>> globally. Having a separate series for that makes sense to me. I'm
>>>>> sending v5 by excluding those parts.
>>>> If so then drop the "drm: exynos: dsi: Restore proper bridge chain
>>>> order" patch and adjust code respectively in samsung-dsim.c. Without the
>>>> Dave's patches, that one doesn't make sense.
>>> Doesn't it break Exynos?
>> No it won't. Lack of the "drm: exynos: dsi: Restore proper bridge chain
>> order" patch doesn't change much against the current state of the driver.
>>
>> Here is my rework of your v4 patchset without the mentioned patch and
>> Dave's patches:
>>
>> https://protect2.fireeye.com/v1/url?k=6282936d-3d19aa74-62831822-000babff3793-9317af6e2b207460&q=1&e=cd36cc51-8faa-4812-880a-8242739a86bd&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Ftree%2Fv6.0-dsi-v4-reworked-minimal
> We have one problem with getting bus format from previous bridge if we
> pass NULL in bridge_func.attach()
> https://protect2.fireeye.com/v1/url?k=bdc3e18a-e258d893-bdc26ac5-000babff3793-1dd81e5acf9d7f83&q=1&e=cd36cc51-8faa-4812-880a-8242739a86bd&u=https%3A%2F%2Fgithub.com%2Fmszyprow%2Flinux%2Fcommit%2F0fa57e33b3bf866efc4c17ab20eec28d6e07b3e9%23diff-3fe873f1ada5f1dfcf2a50ac114bdab3ea7b026d12278648ca40809d3fa1a331R1321
>
> Booting the video as it assigns default bus format if the previous bus
> format is unknown.
>
> [    1.635984] samsung-dsim 32e10000.dsi:
> [drm:samsung_dsim_host_attach] Attached sn65dsi83 device
> [    1.648067] [drm] Initialized mxsfb-drm 1.0.0 20160824 for
> 32e00000.lcdif on minor 0
> [    1.658726] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc]
> using ADMA
> [    1.681893] sn65dsi83 3-002c: Unsupported LVDS bus format 0x100a,
> please check output bridge driver. Falling back to SPWG24.
>
> Does passing the bridge to drm_bridge_attach is working on your platform?
> return drm_bridge_attach(bridge->encoder, dsi->out_bridge, bridge, flags);

Nope, it fails:

[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 
device
panel-samsung-s6e8aa0 11c80000.dsi.0: error -22 setting maximum return 
packet size to 3
panel-samsung-s6e8aa0 11c80000.dsi.0: read id failed

I've already pointed that it makes sense only together with Dave's patches.

Best regards

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 589517372408..301478f70b41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6624,6 +6624,15 @@  T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
 F:	drivers/gpu/drm/panel/panel-samsung-db7430.c
 
+DRM DRIVER FOR SAMSUNG MIPI DSIM BRIDGE
+M:	Jagan Teki <jagan@amarulasolutions.com>
+M:	Marek Szyprowski <m.szyprowski@samsung.com>
+M:	Inki Dae <inki.dae@samsung.com
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	drivers/gpu/drm/bridge/samsung-dsim.c
+F:	include/drm/bridge/samsung-dsim.h
+
 DRM DRIVER FOR SAMSUNG S6D27A1 PANELS
 M:	Markuss Broks <markuss.broks@gmail.com>
 S:	Maintained
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 57946d80b02d..8e85dac9f53e 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -231,6 +231,18 @@  config DRM_PARADE_PS8640
 	  The PS8640 is a high-performance and low-power
 	  MIPI DSI to eDP converter
 
+config DRM_SAMSUNG_DSIM
+	tristate "Samsung MIPI DSIM bridge driver"
+	depends on COMMON_CLK
+	depends on OF && HAS_IOMEM
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	help
+	  The Samsung MIPI DSIM bridge controller driver.
+	  This MIPI DSIM bridge can be found it on Exynos SoCs and
+	  NXP's i.MX8M Mini/Nano.
+
 config DRM_SIL_SII8620
 	tristate "Silicon Image SII8620 HDMI/MHL bridge"
 	depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 1884803c6860..dae843723991 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -15,6 +15,7 @@  obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_PARADE_PS8640) += parade-ps8640.o
+obj-$(CONFIG_DRM_SAMSUNG_DSIM) += samsung-dsim.o
 obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_SII9234) += sii9234.o
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
new file mode 100644
index 000000000000..ab2fa0f42f40
--- /dev/null
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -0,0 +1,1686 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung MIPI DSIM bridge driver.
+ *
+ * Copyright (C) 2021 Amarula Solutions(India)
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * Based on exynos_drm_dsi from
+ * Tomasz Figa <t.figa@samsung.com>
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/bridge/samsung-dsim.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+/* returns true iff both arguments logically differs */
+#define NEQV(a, b) (!(a) ^ !(b))
+
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x)		(((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK		(1 << 8)
+#define DSIM_TX_READY_HS_CLK		(1 << 10)
+#define DSIM_PLL_STABLE			(1 << 31)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST			(1 << 16)
+#define DSIM_SWRST			(1 << 0)
+
+/* DSIM_TIMEOUT */
+#define DSIM_LPDR_TIMEOUT(x)		((x) << 0)
+#define DSIM_BTA_TIMEOUT(x)		((x) << 16)
+
+/* DSIM_CLKCTRL */
+#define DSIM_ESC_PRESCALER(x)		(((x) & 0xffff) << 0)
+#define DSIM_ESC_PRESCALER_MASK		(0xffff << 0)
+#define DSIM_LANE_ESC_CLK_EN_CLK	(1 << 19)
+#define DSIM_LANE_ESC_CLK_EN_DATA(x)	(((x) & 0xf) << 20)
+#define DSIM_LANE_ESC_CLK_EN_DATA_MASK	(0xf << 20)
+#define DSIM_BYTE_CLKEN			(1 << 24)
+#define DSIM_BYTE_CLK_SRC(x)		(((x) & 0x3) << 25)
+#define DSIM_BYTE_CLK_SRC_MASK		(0x3 << 25)
+#define DSIM_PLL_BYPASS			(1 << 27)
+#define DSIM_ESC_CLKEN			(1 << 28)
+#define DSIM_TX_REQUEST_HSCLK		(1 << 31)
+
+/* DSIM_CONFIG */
+#define DSIM_LANE_EN_CLK		(1 << 0)
+#define DSIM_LANE_EN(x)			(((x) & 0xf) << 1)
+#define DSIM_NUM_OF_DATA_LANE(x)	(((x) & 0x3) << 5)
+#define DSIM_SUB_PIX_FORMAT(x)		(((x) & 0x7) << 8)
+#define DSIM_MAIN_PIX_FORMAT_MASK	(0x7 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB888	(0x7 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB666	(0x6 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB666_P	(0x5 << 12)
+#define DSIM_MAIN_PIX_FORMAT_RGB565	(0x4 << 12)
+#define DSIM_SUB_VC			(((x) & 0x3) << 16)
+#define DSIM_MAIN_VC			(((x) & 0x3) << 18)
+#define DSIM_HSA_MODE			(1 << 20)
+#define DSIM_HBP_MODE			(1 << 21)
+#define DSIM_HFP_MODE			(1 << 22)
+#define DSIM_HSE_MODE			(1 << 23)
+#define DSIM_AUTO_MODE			(1 << 24)
+#define DSIM_VIDEO_MODE			(1 << 25)
+#define DSIM_BURST_MODE			(1 << 26)
+#define DSIM_SYNC_INFORM		(1 << 27)
+#define DSIM_EOT_DISABLE		(1 << 28)
+#define DSIM_MFLUSH_VS			(1 << 29)
+/* This flag is valid only for exynos3250/3472/5260/5430 */
+#define DSIM_CLKLANE_STOP		(1 << 30)
+
+/* DSIM_ESCMODE */
+#define DSIM_TX_TRIGGER_RST		(1 << 4)
+#define DSIM_TX_LPDT_LP			(1 << 6)
+#define DSIM_CMD_LPDT_LP		(1 << 7)
+#define DSIM_FORCE_BTA			(1 << 16)
+#define DSIM_FORCE_STOP_STATE		(1 << 20)
+#define DSIM_STOP_STATE_CNT(x)		(((x) & 0x7ff) << 21)
+#define DSIM_STOP_STATE_CNT_MASK	(0x7ff << 21)
+
+/* DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY		(1 << 31)
+#define DSIM_MAIN_VRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 16)
+#define DSIM_MAIN_HRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 0)
+
+/* DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW(x)		((x) << 28)
+#define DSIM_STABLE_VFP(x)		((x) << 16)
+#define DSIM_MAIN_VBP(x)		((x) << 0)
+#define DSIM_CMD_ALLOW_MASK		(0xf << 28)
+#define DSIM_STABLE_VFP_MASK		(0x7ff << 16)
+#define DSIM_MAIN_VBP_MASK		(0x7ff << 0)
+
+/* DSIM_MHPORCH */
+#define DSIM_MAIN_HFP(x)		((x) << 16)
+#define DSIM_MAIN_HBP(x)		((x) << 0)
+#define DSIM_MAIN_HFP_MASK		((0xffff) << 16)
+#define DSIM_MAIN_HBP_MASK		((0xffff) << 0)
+
+/* DSIM_MSYNC */
+#define DSIM_MAIN_VSA(x)		((x) << 22)
+#define DSIM_MAIN_HSA(x)		((x) << 0)
+#define DSIM_MAIN_VSA_MASK		((0x3ff) << 22)
+#define DSIM_MAIN_HSA_MASK		((0xffff) << 0)
+
+/* DSIM_SDRESOL */
+#define DSIM_SUB_STANDY(x)		((x) << 31)
+#define DSIM_SUB_VRESOL(x)		((x) << 16)
+#define DSIM_SUB_HRESOL(x)		((x) << 0)
+#define DSIM_SUB_STANDY_MASK		((0x1) << 31)
+#define DSIM_SUB_VRESOL_MASK		((0x7ff) << 16)
+#define DSIM_SUB_HRESOL_MASK		((0x7ff) << 0)
+
+/* DSIM_INTSRC */
+#define DSIM_INT_PLL_STABLE		(1 << 31)
+#define DSIM_INT_SW_RST_RELEASE		(1 << 30)
+#define DSIM_INT_SFR_FIFO_EMPTY		(1 << 29)
+#define DSIM_INT_SFR_HDR_FIFO_EMPTY	(1 << 28)
+#define DSIM_INT_BTA			(1 << 25)
+#define DSIM_INT_FRAME_DONE		(1 << 24)
+#define DSIM_INT_RX_TIMEOUT		(1 << 21)
+#define DSIM_INT_BTA_TIMEOUT		(1 << 20)
+#define DSIM_INT_RX_DONE		(1 << 18)
+#define DSIM_INT_RX_TE			(1 << 17)
+#define DSIM_INT_RX_ACK			(1 << 16)
+#define DSIM_INT_RX_ECC_ERR		(1 << 15)
+#define DSIM_INT_RX_CRC_ERR		(1 << 14)
+
+/* DSIM_FIFOCTRL */
+#define DSIM_RX_DATA_FULL		(1 << 25)
+#define DSIM_RX_DATA_EMPTY		(1 << 24)
+#define DSIM_SFR_HEADER_FULL		(1 << 23)
+#define DSIM_SFR_HEADER_EMPTY		(1 << 22)
+#define DSIM_SFR_PAYLOAD_FULL		(1 << 21)
+#define DSIM_SFR_PAYLOAD_EMPTY		(1 << 20)
+#define DSIM_I80_HEADER_FULL		(1 << 19)
+#define DSIM_I80_HEADER_EMPTY		(1 << 18)
+#define DSIM_I80_PAYLOAD_FULL		(1 << 17)
+#define DSIM_I80_PAYLOAD_EMPTY		(1 << 16)
+#define DSIM_SD_HEADER_FULL		(1 << 15)
+#define DSIM_SD_HEADER_EMPTY		(1 << 14)
+#define DSIM_SD_PAYLOAD_FULL		(1 << 13)
+#define DSIM_SD_PAYLOAD_EMPTY		(1 << 12)
+#define DSIM_MD_HEADER_FULL		(1 << 11)
+#define DSIM_MD_HEADER_EMPTY		(1 << 10)
+#define DSIM_MD_PAYLOAD_FULL		(1 << 9)
+#define DSIM_MD_PAYLOAD_EMPTY		(1 << 8)
+#define DSIM_RX_FIFO			(1 << 4)
+#define DSIM_SFR_FIFO			(1 << 3)
+#define DSIM_I80_FIFO			(1 << 2)
+#define DSIM_SD_FIFO			(1 << 1)
+#define DSIM_MD_FIFO			(1 << 0)
+
+/* DSIM_PHYACCHR */
+#define DSIM_AFC_EN			(1 << 14)
+#define DSIM_AFC_CTL(x)			(((x) & 0x7) << 5)
+
+/* DSIM_PLLCTRL */
+#define DSIM_FREQ_BAND(x)		((x) << 24)
+#define DSIM_PLL_EN			(1 << 23)
+#define DSIM_PLL_P(x)			((x) << 13)
+#define DSIM_PLL_M(x)			((x) << 4)
+#define DSIM_PLL_S(x)			((x) << 1)
+
+/* DSIM_PHYCTRL */
+#define DSIM_PHYCTRL_ULPS_EXIT(x)	(((x) & 0x1ff) << 0)
+#define DSIM_PHYCTRL_B_DPHYCTL_VREG_LP	(1 << 30)
+#define DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP	(1 << 14)
+
+/* DSIM_PHYTIMING */
+#define DSIM_PHYTIMING_LPX(x)		((x) << 8)
+#define DSIM_PHYTIMING_HS_EXIT(x)	((x) << 0)
+
+/* DSIM_PHYTIMING1 */
+#define DSIM_PHYTIMING1_CLK_PREPARE(x)	((x) << 24)
+#define DSIM_PHYTIMING1_CLK_ZERO(x)	((x) << 16)
+#define DSIM_PHYTIMING1_CLK_POST(x)	((x) << 8)
+#define DSIM_PHYTIMING1_CLK_TRAIL(x)	((x) << 0)
+
+/* DSIM_PHYTIMING2 */
+#define DSIM_PHYTIMING2_HS_PREPARE(x)	((x) << 16)
+#define DSIM_PHYTIMING2_HS_ZERO(x)	((x) << 8)
+#define DSIM_PHYTIMING2_HS_TRAIL(x)	((x) << 0)
+
+#define DSI_MAX_BUS_WIDTH		4
+#define DSI_NUM_VIRTUAL_CHANNELS	4
+#define DSI_TX_FIFO_SIZE		2048
+#define DSI_RX_FIFO_SIZE		256
+#define DSI_XFER_TIMEOUT_MS		100
+#define DSI_RX_FIFO_EMPTY		0x30800002
+
+#define OLD_SCLK_MIPI_CLK_NAME		"pll_clk"
+
+static const char *const clk_names[5] = {
+	"bus_clk",
+	"sclk_mipi",
+	"phyclk_mipidphy0_bitclkdiv8",
+	"phyclk_mipidphy0_rxclkesc0",
+	"sclk_rgb_vclk_to_dsim0"
+};
+
+enum samsung_dsim_transfer_type {
+	EXYNOS_DSI_TX,
+	EXYNOS_DSI_RX,
+};
+
+enum reg_idx {
+	DSIM_STATUS_REG,	/* Status register */
+	DSIM_SWRST_REG,		/* Software reset register */
+	DSIM_CLKCTRL_REG,	/* Clock control register */
+	DSIM_TIMEOUT_REG,	/* Time out register */
+	DSIM_CONFIG_REG,	/* Configuration register */
+	DSIM_ESCMODE_REG,	/* Escape mode register */
+	DSIM_MDRESOL_REG,
+	DSIM_MVPORCH_REG,	/* Main display Vporch register */
+	DSIM_MHPORCH_REG,	/* Main display Hporch register */
+	DSIM_MSYNC_REG,		/* Main display sync area register */
+	DSIM_INTSRC_REG,	/* Interrupt source register */
+	DSIM_INTMSK_REG,	/* Interrupt mask register */
+	DSIM_PKTHDR_REG,	/* Packet Header FIFO register */
+	DSIM_PAYLOAD_REG,	/* Payload FIFO register */
+	DSIM_RXFIFO_REG,	/* Read FIFO register */
+	DSIM_FIFOCTRL_REG,	/* FIFO status and control register */
+	DSIM_PLLCTRL_REG,	/* PLL control register */
+	DSIM_PHYCTRL_REG,
+	DSIM_PHYTIMING_REG,
+	DSIM_PHYTIMING1_REG,
+	DSIM_PHYTIMING2_REG,
+	NUM_REGS
+};
+
+static const unsigned int exynos_reg_ofs[] = {
+	[DSIM_STATUS_REG] =  0x00,
+	[DSIM_SWRST_REG] =  0x04,
+	[DSIM_CLKCTRL_REG] =  0x08,
+	[DSIM_TIMEOUT_REG] =  0x0c,
+	[DSIM_CONFIG_REG] =  0x10,
+	[DSIM_ESCMODE_REG] =  0x14,
+	[DSIM_MDRESOL_REG] =  0x18,
+	[DSIM_MVPORCH_REG] =  0x1c,
+	[DSIM_MHPORCH_REG] =  0x20,
+	[DSIM_MSYNC_REG] =  0x24,
+	[DSIM_INTSRC_REG] =  0x2c,
+	[DSIM_INTMSK_REG] =  0x30,
+	[DSIM_PKTHDR_REG] =  0x34,
+	[DSIM_PAYLOAD_REG] =  0x38,
+	[DSIM_RXFIFO_REG] =  0x3c,
+	[DSIM_FIFOCTRL_REG] =  0x44,
+	[DSIM_PLLCTRL_REG] =  0x4c,
+	[DSIM_PHYCTRL_REG] =  0x5c,
+	[DSIM_PHYTIMING_REG] =  0x64,
+	[DSIM_PHYTIMING1_REG] =  0x68,
+	[DSIM_PHYTIMING2_REG] =  0x6c,
+};
+
+static const unsigned int exynos5433_reg_ofs[] = {
+	[DSIM_STATUS_REG] = 0x04,
+	[DSIM_SWRST_REG] = 0x0C,
+	[DSIM_CLKCTRL_REG] = 0x10,
+	[DSIM_TIMEOUT_REG] = 0x14,
+	[DSIM_CONFIG_REG] = 0x18,
+	[DSIM_ESCMODE_REG] = 0x1C,
+	[DSIM_MDRESOL_REG] = 0x20,
+	[DSIM_MVPORCH_REG] = 0x24,
+	[DSIM_MHPORCH_REG] = 0x28,
+	[DSIM_MSYNC_REG] = 0x2C,
+	[DSIM_INTSRC_REG] = 0x34,
+	[DSIM_INTMSK_REG] = 0x38,
+	[DSIM_PKTHDR_REG] = 0x3C,
+	[DSIM_PAYLOAD_REG] = 0x40,
+	[DSIM_RXFIFO_REG] = 0x44,
+	[DSIM_FIFOCTRL_REG] = 0x4C,
+	[DSIM_PLLCTRL_REG] = 0x94,
+	[DSIM_PHYCTRL_REG] = 0xA4,
+	[DSIM_PHYTIMING_REG] = 0xB4,
+	[DSIM_PHYTIMING1_REG] = 0xB8,
+	[DSIM_PHYTIMING2_REG] = 0xBC,
+};
+
+enum reg_value_idx {
+	RESET_TYPE,
+	PLL_TIMER,
+	STOP_STATE_CNT,
+	PHYCTRL_ULPS_EXIT,
+	PHYCTRL_VREG_LP,
+	PHYCTRL_SLEW_UP,
+	PHYTIMING_LPX,
+	PHYTIMING_HS_EXIT,
+	PHYTIMING_CLK_PREPARE,
+	PHYTIMING_CLK_ZERO,
+	PHYTIMING_CLK_POST,
+	PHYTIMING_CLK_TRAIL,
+	PHYTIMING_HS_PREPARE,
+	PHYTIMING_HS_ZERO,
+	PHYTIMING_HS_TRAIL
+};
+
+static const unsigned int reg_values[] = {
+	[RESET_TYPE] = DSIM_SWRST,
+	[PLL_TIMER] = 500,
+	[STOP_STATE_CNT] = 0xf,
+	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x0af),
+	[PHYCTRL_VREG_LP] = 0,
+	[PHYCTRL_SLEW_UP] = 0,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x27),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x09),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
+};
+
+static const unsigned int exynos5422_reg_values[] = {
+	[RESET_TYPE] = DSIM_SWRST,
+	[PLL_TIMER] = 500,
+	[STOP_STATE_CNT] = 0xf,
+	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0xaf),
+	[PHYCTRL_VREG_LP] = 0,
+	[PHYCTRL_SLEW_UP] = 0,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x08),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0d),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x30),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x0a),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0c),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x11),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0d),
+};
+
+static const unsigned int exynos5433_reg_values[] = {
+	[RESET_TYPE] = DSIM_FUNCRST,
+	[PLL_TIMER] = 22200,
+	[STOP_STATE_CNT] = 0xa,
+	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x190),
+	[PHYCTRL_VREG_LP] = DSIM_PHYCTRL_B_DPHYCTL_VREG_LP,
+	[PHYCTRL_SLEW_UP] = DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP,
+	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x07),
+	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0c),
+	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
+	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x2d),
+	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
+	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x09),
+	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0b),
+	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x10),
+	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
+};
+
+static const struct samsung_dsim_driver_data exynos3_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
+	.plltmr_reg = 0x50,
+	.has_freqband = 1,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.reg_values = reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos4_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
+	.plltmr_reg = 0x50,
+	.has_freqband = 1,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.reg_values = reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos5_dsi_driver_data = {
+	.reg_ofs = exynos_reg_ofs,
+	.plltmr_reg = 0x58,
+	.num_clks = 2,
+	.max_freq = 1000,
+	.wait_for_reset = 1,
+	.num_bits_resol = 11,
+	.reg_values = reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos5433_dsi_driver_data = {
+	.reg_ofs = exynos5433_reg_ofs,
+	.plltmr_reg = 0xa0,
+	.has_clklane_stop = 1,
+	.num_clks = 5,
+	.max_freq = 1500,
+	.wait_for_reset = 0,
+	.num_bits_resol = 12,
+	.reg_values = exynos5433_reg_values,
+};
+
+static const struct samsung_dsim_driver_data exynos5422_dsi_driver_data = {
+	.reg_ofs = exynos5433_reg_ofs,
+	.plltmr_reg = 0xa0,
+	.has_clklane_stop = 1,
+	.num_clks = 2,
+	.max_freq = 1500,
+	.wait_for_reset = 1,
+	.num_bits_resol = 12,
+	.reg_values = exynos5422_reg_values,
+};
+
+static const struct of_device_id samsung_dsim_of_match[] = {
+	{
+		.compatible = "samsung,exynos3250-mipi-dsi",
+		.data = &exynos3_dsi_driver_data
+	},
+	{
+		.compatible = "samsung,exynos4210-mipi-dsi",
+		.data = &exynos4_dsi_driver_data
+	},
+	{
+		.compatible = "samsung,exynos5410-mipi-dsi",
+		.data = &exynos5_dsi_driver_data
+	},
+	{
+		.compatible = "samsung,exynos5422-mipi-dsi",
+		.data = &exynos5422_dsi_driver_data
+	},
+	{
+		.compatible = "samsung,exynos5433-mipi-dsi",
+		.data = &exynos5433_dsi_driver_data
+	},
+	{ /* sentinel. */ }
+};
+
+static inline struct samsung_dsim *host_to_dsi(struct mipi_dsi_host *h)
+{
+	return container_of(h, struct samsung_dsim, dsi_host);
+}
+
+static inline struct samsung_dsim *bridge_to_dsi(struct drm_bridge *b)
+{
+	return container_of(b, struct samsung_dsim, bridge);
+}
+
+static inline void samsung_dsim_write(struct samsung_dsim *dsi,
+				      enum reg_idx idx, u32 val)
+{
+	writel(val, dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
+}
+
+static inline u32 samsung_dsim_read(struct samsung_dsim *dsi, enum reg_idx idx)
+{
+	return readl(dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
+}
+
+static void samsung_dsim_wait_for_reset(struct samsung_dsim *dsi)
+{
+	if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
+		return;
+
+	dev_err(dsi->dev, "timeout waiting for reset\n");
+}
+
+static void samsung_dsim_reset(struct samsung_dsim *dsi)
+{
+	u32 reset_val = dsi->driver_data->reg_values[RESET_TYPE];
+
+	reinit_completion(&dsi->completed);
+	samsung_dsim_write(dsi, DSIM_SWRST_REG, reset_val);
+}
+
+#ifndef MHZ
+#define MHZ	(1000*1000)
+#endif
+
+static unsigned long samsung_dsim_pll_find_pms(struct samsung_dsim *dsi,
+					       unsigned long fin,
+					       unsigned long fout,
+					       u8 *p, u16 *m, u8 *s)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	unsigned long best_freq = 0;
+	u32 min_delta = 0xffffffff;
+	u8 p_min, p_max;
+	u8 _p, best_p;
+	u16 _m, best_m;
+	u8 _s, best_s;
+
+	p_min = DIV_ROUND_UP(fin, (12 * MHZ));
+	p_max = fin / (6 * MHZ);
+
+	for (_p = p_min; _p <= p_max; ++_p) {
+		for (_s = 0; _s <= 5; ++_s) {
+			u64 tmp;
+			u32 delta;
+
+			tmp = (u64)fout * (_p << _s);
+			do_div(tmp, fin);
+			_m = tmp;
+			if (_m < 41 || _m > 125)
+				continue;
+
+			tmp = (u64)_m * fin;
+			do_div(tmp, _p);
+			if (tmp < 500 * MHZ ||
+					tmp > driver_data->max_freq * MHZ)
+				continue;
+
+			tmp = (u64)_m * fin;
+			do_div(tmp, _p << _s);
+
+			delta = abs(fout - tmp);
+			if (delta < min_delta) {
+				best_p = _p;
+				best_m = _m;
+				best_s = _s;
+				min_delta = delta;
+				best_freq = tmp;
+			}
+		}
+	}
+
+	if (best_freq) {
+		*p = best_p;
+		*m = best_m;
+		*s = best_s;
+	}
+
+	return best_freq;
+}
+
+static unsigned long samsung_dsim_set_pll(struct samsung_dsim *dsi,
+					  unsigned long freq)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	unsigned long fin, fout;
+	int timeout;
+	u8 p, s;
+	u16 m;
+	u32 reg;
+
+	fin = dsi->pll_clk_rate;
+	fout = samsung_dsim_pll_find_pms(dsi, fin, freq, &p, &m, &s);
+	if (!fout) {
+		dev_err(dsi->dev,
+			"failed to find PLL PMS for requested frequency\n");
+		return 0;
+	}
+	dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
+
+	writel(driver_data->reg_values[PLL_TIMER],
+			dsi->reg_base + driver_data->plltmr_reg);
+
+	reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
+
+	if (driver_data->has_freqband) {
+		static const unsigned long freq_bands[] = {
+			100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
+			270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
+			510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
+			770 * MHZ, 870 * MHZ, 950 * MHZ,
+		};
+		int band;
+
+		for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
+			if (fout < freq_bands[band])
+				break;
+
+		dev_dbg(dsi->dev, "band %d\n", band);
+
+		reg |= DSIM_FREQ_BAND(band);
+	}
+
+	samsung_dsim_write(dsi, DSIM_PLLCTRL_REG, reg);
+
+	timeout = 1000;
+	do {
+		if (timeout-- == 0) {
+			dev_err(dsi->dev, "PLL failed to stabilize\n");
+			return 0;
+		}
+		reg = samsung_dsim_read(dsi, DSIM_STATUS_REG);
+	} while ((reg & DSIM_PLL_STABLE) == 0);
+
+	return fout;
+}
+
+static int samsung_dsim_enable_clock(struct samsung_dsim *dsi)
+{
+	unsigned long hs_clk, byte_clk, esc_clk;
+	unsigned long esc_div;
+	u32 reg;
+
+	hs_clk = samsung_dsim_set_pll(dsi, dsi->burst_clk_rate);
+	if (!hs_clk) {
+		dev_err(dsi->dev, "failed to configure DSI PLL\n");
+		return -EFAULT;
+	}
+
+	byte_clk = hs_clk / 8;
+	esc_div = DIV_ROUND_UP(byte_clk, dsi->esc_clk_rate);
+	esc_clk = byte_clk / esc_div;
+
+	if (esc_clk > 20 * MHZ) {
+		++esc_div;
+		esc_clk = byte_clk / esc_div;
+	}
+
+	dev_dbg(dsi->dev, "hs_clk = %lu, byte_clk = %lu, esc_clk = %lu\n",
+		hs_clk, byte_clk, esc_clk);
+
+	reg = samsung_dsim_read(dsi, DSIM_CLKCTRL_REG);
+	reg &= ~(DSIM_ESC_PRESCALER_MASK | DSIM_LANE_ESC_CLK_EN_CLK
+			| DSIM_LANE_ESC_CLK_EN_DATA_MASK | DSIM_PLL_BYPASS
+			| DSIM_BYTE_CLK_SRC_MASK);
+	reg |= DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN
+			| DSIM_ESC_PRESCALER(esc_div)
+			| DSIM_LANE_ESC_CLK_EN_CLK
+			| DSIM_LANE_ESC_CLK_EN_DATA(BIT(dsi->lanes) - 1)
+			| DSIM_BYTE_CLK_SRC(0)
+			| DSIM_TX_REQUEST_HSCLK;
+	samsung_dsim_write(dsi, DSIM_CLKCTRL_REG, reg);
+
+	return 0;
+}
+
+static void samsung_dsim_set_phy_ctrl(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	const unsigned int *reg_values = driver_data->reg_values;
+	u32 reg;
+
+	if (driver_data->has_freqband)
+		return;
+
+	/* B D-PHY: D-PHY Master & Slave Analog Block control */
+	reg = reg_values[PHYCTRL_ULPS_EXIT] | reg_values[PHYCTRL_VREG_LP] |
+		reg_values[PHYCTRL_SLEW_UP];
+	samsung_dsim_write(dsi, DSIM_PHYCTRL_REG, reg);
+
+	/*
+	 * T LPX: Transmitted length of any Low-Power state period
+	 * T HS-EXIT: Time that the transmitter drives LP-11 following a HS
+	 *	burst
+	 */
+	reg = reg_values[PHYTIMING_LPX] | reg_values[PHYTIMING_HS_EXIT];
+	samsung_dsim_write(dsi, DSIM_PHYTIMING_REG, reg);
+
+	/*
+	 * T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
+	 *	Line state immediately before the HS-0 Line state starting the
+	 *	HS transmission
+	 * T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
+	 *	transmitting the Clock.
+	 * T CLK_POST: Time that the transmitter continues to send HS clock
+	 *	after the last associated Data Lane has transitioned to LP Mode
+	 *	Interval is defined as the period from the end of T HS-TRAIL to
+	 *	the beginning of T CLK-TRAIL
+	 * T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
+	 *	the last payload clock bit of a HS transmission burst
+	 */
+	reg = reg_values[PHYTIMING_CLK_PREPARE] |
+		reg_values[PHYTIMING_CLK_ZERO] |
+		reg_values[PHYTIMING_CLK_POST] |
+		reg_values[PHYTIMING_CLK_TRAIL];
+
+	samsung_dsim_write(dsi, DSIM_PHYTIMING1_REG, reg);
+
+	/*
+	 * T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
+	 *	Line state immediately before the HS-0 Line state starting the
+	 *	HS transmission
+	 * T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
+	 *	transmitting the Sync sequence.
+	 * T HS-TRAIL: Time that the transmitter drives the flipped differential
+	 *	state after last payload data bit of a HS transmission burst
+	 */
+	reg = reg_values[PHYTIMING_HS_PREPARE] | reg_values[PHYTIMING_HS_ZERO] |
+		reg_values[PHYTIMING_HS_TRAIL];
+	samsung_dsim_write(dsi, DSIM_PHYTIMING2_REG, reg);
+}
+
+static void samsung_dsim_disable_clock(struct samsung_dsim *dsi)
+{
+	u32 reg;
+
+	reg = samsung_dsim_read(dsi, DSIM_CLKCTRL_REG);
+	reg &= ~(DSIM_LANE_ESC_CLK_EN_CLK | DSIM_LANE_ESC_CLK_EN_DATA_MASK
+			| DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN);
+	samsung_dsim_write(dsi, DSIM_CLKCTRL_REG, reg);
+
+	reg = samsung_dsim_read(dsi, DSIM_PLLCTRL_REG);
+	reg &= ~DSIM_PLL_EN;
+	samsung_dsim_write(dsi, DSIM_PLLCTRL_REG, reg);
+}
+
+static void samsung_dsim_enable_lane(struct samsung_dsim *dsi, u32 lane)
+{
+	u32 reg = samsung_dsim_read(dsi, DSIM_CONFIG_REG);
+
+	reg |= (DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1) | DSIM_LANE_EN_CLK |
+			DSIM_LANE_EN(lane));
+	samsung_dsim_write(dsi, DSIM_CONFIG_REG, reg);
+}
+
+static int samsung_dsim_init_link(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	int timeout;
+	u32 reg;
+	u32 lanes_mask;
+
+	/* Initialize FIFO pointers */
+	reg = samsung_dsim_read(dsi, DSIM_FIFOCTRL_REG);
+	reg &= ~0x1f;
+	samsung_dsim_write(dsi, DSIM_FIFOCTRL_REG, reg);
+
+	usleep_range(9000, 11000);
+
+	reg |= 0x1f;
+	samsung_dsim_write(dsi, DSIM_FIFOCTRL_REG, reg);
+	usleep_range(9000, 11000);
+
+	/* DSI configuration */
+	reg = 0;
+
+	/*
+	 * The first bit of mode_flags specifies display configuration.
+	 * If this bit is set[= MIPI_DSI_MODE_VIDEO], dsi will support video
+	 * mode, otherwise it will support command mode.
+	 */
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		reg |= DSIM_VIDEO_MODE;
+
+		/*
+		 * The user manual describes that following bits are ignored in
+		 * command mode.
+		 */
+		if (!(dsi->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
+			reg |= DSIM_MFLUSH_VS;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+			reg |= DSIM_SYNC_INFORM;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+			reg |= DSIM_BURST_MODE;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
+			reg |= DSIM_AUTO_MODE;
+		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
+			reg |= DSIM_HSE_MODE;
+		if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP))
+			reg |= DSIM_HFP_MODE;
+		if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HBP))
+			reg |= DSIM_HBP_MODE;
+		if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HSA))
+			reg |= DSIM_HSA_MODE;
+	}
+
+	if (!(dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET))
+		reg |= DSIM_EOT_DISABLE;
+
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB888;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB666;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB666_P;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		reg |= DSIM_MAIN_PIX_FORMAT_RGB565;
+		break;
+	default:
+		dev_err(dsi->dev, "invalid pixel format\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Use non-continuous clock mode if the periparal wants and
+	 * host controller supports
+	 *
+	 * In non-continous clock mode, host controller will turn off
+	 * the HS clock between high-speed transmissions to reduce
+	 * power consumption.
+	 */
+	if (driver_data->has_clklane_stop &&
+			dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
+		reg |= DSIM_CLKLANE_STOP;
+	}
+	samsung_dsim_write(dsi, DSIM_CONFIG_REG, reg);
+
+	lanes_mask = BIT(dsi->lanes) - 1;
+	samsung_dsim_enable_lane(dsi, lanes_mask);
+
+	/* Check clock and data lane state are stop state */
+	timeout = 100;
+	do {
+		if (timeout-- == 0) {
+			dev_err(dsi->dev, "waiting for bus lanes timed out\n");
+			return -EFAULT;
+		}
+
+		reg = samsung_dsim_read(dsi, DSIM_STATUS_REG);
+		if ((reg & DSIM_STOP_STATE_DAT(lanes_mask))
+		    != DSIM_STOP_STATE_DAT(lanes_mask))
+			continue;
+	} while (!(reg & (DSIM_STOP_STATE_CLK | DSIM_TX_READY_HS_CLK)));
+
+	reg = samsung_dsim_read(dsi, DSIM_ESCMODE_REG);
+	reg &= ~DSIM_STOP_STATE_CNT_MASK;
+	reg |= DSIM_STOP_STATE_CNT(driver_data->reg_values[STOP_STATE_CNT]);
+	samsung_dsim_write(dsi, DSIM_ESCMODE_REG, reg);
+
+	reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
+	samsung_dsim_write(dsi, DSIM_TIMEOUT_REG, reg);
+
+	return 0;
+}
+
+static void samsung_dsim_set_display_mode(struct samsung_dsim *dsi)
+{
+	struct drm_display_mode *m = &dsi->mode;
+	unsigned int num_bits_resol = dsi->driver_data->num_bits_resol;
+	u32 reg;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		reg = DSIM_CMD_ALLOW(0xf)
+			| DSIM_STABLE_VFP(m->vsync_start - m->vdisplay)
+			| DSIM_MAIN_VBP(m->vtotal - m->vsync_end);
+		samsung_dsim_write(dsi, DSIM_MVPORCH_REG, reg);
+
+		reg = DSIM_MAIN_HFP(m->hsync_start - m->hdisplay)
+			| DSIM_MAIN_HBP(m->htotal - m->hsync_end);
+		samsung_dsim_write(dsi, DSIM_MHPORCH_REG, reg);
+
+		reg = DSIM_MAIN_VSA(m->vsync_end - m->vsync_start)
+			| DSIM_MAIN_HSA(m->hsync_end - m->hsync_start);
+		samsung_dsim_write(dsi, DSIM_MSYNC_REG, reg);
+	}
+	reg =  DSIM_MAIN_HRESOL(m->hdisplay, num_bits_resol) |
+		DSIM_MAIN_VRESOL(m->vdisplay, num_bits_resol);
+
+	samsung_dsim_write(dsi, DSIM_MDRESOL_REG, reg);
+
+	dev_dbg(dsi->dev, "LCD size = %dx%d\n", m->hdisplay, m->vdisplay);
+}
+
+static void samsung_dsim_set_display_enable(struct samsung_dsim *dsi, bool enable)
+{
+	u32 reg;
+
+	reg = samsung_dsim_read(dsi, DSIM_MDRESOL_REG);
+	if (enable)
+		reg |= DSIM_MAIN_STAND_BY;
+	else
+		reg &= ~DSIM_MAIN_STAND_BY;
+	samsung_dsim_write(dsi, DSIM_MDRESOL_REG, reg);
+}
+
+static int samsung_dsim_wait_for_hdr_fifo(struct samsung_dsim *dsi)
+{
+	int timeout = 2000;
+
+	do {
+		u32 reg = samsung_dsim_read(dsi, DSIM_FIFOCTRL_REG);
+
+		if (!(reg & DSIM_SFR_HEADER_FULL))
+			return 0;
+
+		if (!cond_resched())
+			usleep_range(950, 1050);
+	} while (--timeout);
+
+	return -ETIMEDOUT;
+}
+
+static void samsung_dsim_set_cmd_lpm(struct samsung_dsim *dsi, bool lpm)
+{
+	u32 v = samsung_dsim_read(dsi, DSIM_ESCMODE_REG);
+
+	if (lpm)
+		v |= DSIM_CMD_LPDT_LP;
+	else
+		v &= ~DSIM_CMD_LPDT_LP;
+
+	samsung_dsim_write(dsi, DSIM_ESCMODE_REG, v);
+}
+
+static void samsung_dsim_force_bta(struct samsung_dsim *dsi)
+{
+	u32 v = samsung_dsim_read(dsi, DSIM_ESCMODE_REG);
+
+	v |= DSIM_FORCE_BTA;
+	samsung_dsim_write(dsi, DSIM_ESCMODE_REG, v);
+}
+
+static void samsung_dsim_send_to_fifo(struct samsung_dsim *dsi,
+				      struct samsung_dsim_transfer *xfer)
+{
+	struct device *dev = dsi->dev;
+	struct mipi_dsi_packet *pkt = &xfer->packet;
+	const u8 *payload = pkt->payload + xfer->tx_done;
+	u16 length = pkt->payload_length - xfer->tx_done;
+	bool first = !xfer->tx_done;
+	u32 reg;
+
+	dev_dbg(dev, "< xfer %pK: tx len %u, done %u, rx len %u, done %u\n",
+		xfer, length, xfer->tx_done, xfer->rx_len, xfer->rx_done);
+
+	if (length > DSI_TX_FIFO_SIZE)
+		length = DSI_TX_FIFO_SIZE;
+
+	xfer->tx_done += length;
+
+	/* Send payload */
+	while (length >= 4) {
+		reg = get_unaligned_le32(payload);
+		samsung_dsim_write(dsi, DSIM_PAYLOAD_REG, reg);
+		payload += 4;
+		length -= 4;
+	}
+
+	reg = 0;
+	switch (length) {
+	case 3:
+		reg |= payload[2] << 16;
+		fallthrough;
+	case 2:
+		reg |= payload[1] << 8;
+		fallthrough;
+	case 1:
+		reg |= payload[0];
+		samsung_dsim_write(dsi, DSIM_PAYLOAD_REG, reg);
+		break;
+	}
+
+	/* Send packet header */
+	if (!first)
+		return;
+
+	reg = get_unaligned_le32(pkt->header);
+	if (samsung_dsim_wait_for_hdr_fifo(dsi)) {
+		dev_err(dev, "waiting for header FIFO timed out\n");
+		return;
+	}
+
+	if (NEQV(xfer->flags & MIPI_DSI_MSG_USE_LPM,
+		 dsi->state & DSIM_STATE_CMD_LPM)) {
+		samsung_dsim_set_cmd_lpm(dsi, xfer->flags & MIPI_DSI_MSG_USE_LPM);
+		dsi->state ^= DSIM_STATE_CMD_LPM;
+	}
+
+	samsung_dsim_write(dsi, DSIM_PKTHDR_REG, reg);
+
+	if (xfer->flags & MIPI_DSI_MSG_REQ_ACK)
+		samsung_dsim_force_bta(dsi);
+}
+
+static void samsung_dsim_read_from_fifo(struct samsung_dsim *dsi,
+					struct samsung_dsim_transfer *xfer)
+{
+	u8 *payload = xfer->rx_payload + xfer->rx_done;
+	bool first = !xfer->rx_done;
+	struct device *dev = dsi->dev;
+	u16 length;
+	u32 reg;
+
+	if (first) {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+
+		switch (reg & 0x3f) {
+		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
+		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
+			if (xfer->rx_len >= 2) {
+				payload[1] = reg >> 16;
+				++xfer->rx_done;
+			}
+			fallthrough;
+		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
+		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
+			payload[0] = reg >> 8;
+			++xfer->rx_done;
+			xfer->rx_len = xfer->rx_done;
+			xfer->result = 0;
+			goto clear_fifo;
+		case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
+			dev_err(dev, "DSI Error Report: 0x%04x\n", (reg >> 8) & 0xffff);
+			xfer->result = 0;
+			goto clear_fifo;
+		}
+
+		length = (reg >> 8) & 0xffff;
+		if (length > xfer->rx_len) {
+			dev_err(dev,
+				"response too long (%u > %u bytes), stripping\n",
+				xfer->rx_len, length);
+			length = xfer->rx_len;
+		} else if (length < xfer->rx_len)
+			xfer->rx_len = length;
+	}
+
+	length = xfer->rx_len - xfer->rx_done;
+	xfer->rx_done += length;
+
+	/* Receive payload */
+	while (length >= 4) {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+		payload[0] = (reg >>  0) & 0xff;
+		payload[1] = (reg >>  8) & 0xff;
+		payload[2] = (reg >> 16) & 0xff;
+		payload[3] = (reg >> 24) & 0xff;
+		payload += 4;
+		length -= 4;
+	}
+
+	if (length) {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+		switch (length) {
+		case 3:
+			payload[2] = (reg >> 16) & 0xff;
+			fallthrough;
+		case 2:
+			payload[1] = (reg >> 8) & 0xff;
+			fallthrough;
+		case 1:
+			payload[0] = reg & 0xff;
+		}
+	}
+
+	if (xfer->rx_done == xfer->rx_len)
+		xfer->result = 0;
+
+clear_fifo:
+	length = DSI_RX_FIFO_SIZE / 4;
+	do {
+		reg = samsung_dsim_read(dsi, DSIM_RXFIFO_REG);
+		if (reg == DSI_RX_FIFO_EMPTY)
+			break;
+	} while (--length);
+}
+
+static void samsung_dsim_transfer_start(struct samsung_dsim *dsi)
+{
+	unsigned long flags;
+	struct samsung_dsim_transfer *xfer;
+	bool start = false;
+
+again:
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	if (list_empty(&dsi->transfer_list)) {
+		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+		return;
+	}
+
+	xfer = list_first_entry(&dsi->transfer_list,
+				struct samsung_dsim_transfer, list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (xfer->packet.payload_length &&
+	    xfer->tx_done == xfer->packet.payload_length)
+		/* waiting for RX */
+		return;
+
+	samsung_dsim_send_to_fifo(dsi, xfer);
+
+	if (xfer->packet.payload_length || xfer->rx_len)
+		return;
+
+	xfer->result = 0;
+	complete(&xfer->completed);
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	list_del_init(&xfer->list);
+	start = !list_empty(&dsi->transfer_list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (start)
+		goto again;
+}
+
+static bool samsung_dsim_transfer_finish(struct samsung_dsim *dsi)
+{
+	struct samsung_dsim_transfer *xfer;
+	unsigned long flags;
+	bool start = true;
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	if (list_empty(&dsi->transfer_list)) {
+		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+		return false;
+	}
+
+	xfer = list_first_entry(&dsi->transfer_list,
+				struct samsung_dsim_transfer, list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	dev_dbg(dsi->dev,
+		"> xfer %pK, tx_len %zu, tx_done %u, rx_len %u, rx_done %u\n",
+		xfer, xfer->packet.payload_length, xfer->tx_done, xfer->rx_len,
+		xfer->rx_done);
+
+	if (xfer->tx_done != xfer->packet.payload_length)
+		return true;
+
+	if (xfer->rx_done != xfer->rx_len)
+		samsung_dsim_read_from_fifo(dsi, xfer);
+
+	if (xfer->rx_done != xfer->rx_len)
+		return true;
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	list_del_init(&xfer->list);
+	start = !list_empty(&dsi->transfer_list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (!xfer->rx_len)
+		xfer->result = 0;
+	complete(&xfer->completed);
+
+	return start;
+}
+
+static void samsung_dsim_remove_transfer(struct samsung_dsim *dsi,
+					 struct samsung_dsim_transfer *xfer)
+{
+	unsigned long flags;
+	bool start;
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	if (!list_empty(&dsi->transfer_list) &&
+	    xfer == list_first_entry(&dsi->transfer_list,
+				     struct samsung_dsim_transfer, list)) {
+		list_del_init(&xfer->list);
+		start = !list_empty(&dsi->transfer_list);
+		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+		if (start)
+			samsung_dsim_transfer_start(dsi);
+		return;
+	}
+
+	list_del_init(&xfer->list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+}
+
+static int samsung_dsim_transfer(struct samsung_dsim *dsi,
+				 struct samsung_dsim_transfer *xfer)
+{
+	unsigned long flags;
+	bool stopped;
+
+	xfer->tx_done = 0;
+	xfer->rx_done = 0;
+	xfer->result = -ETIMEDOUT;
+	init_completion(&xfer->completed);
+
+	spin_lock_irqsave(&dsi->transfer_lock, flags);
+
+	stopped = list_empty(&dsi->transfer_list);
+	list_add_tail(&xfer->list, &dsi->transfer_list);
+
+	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+
+	if (stopped)
+		samsung_dsim_transfer_start(dsi);
+
+	wait_for_completion_timeout(&xfer->completed,
+				    msecs_to_jiffies(DSI_XFER_TIMEOUT_MS));
+	if (xfer->result == -ETIMEDOUT) {
+		struct mipi_dsi_packet *pkt = &xfer->packet;
+
+		samsung_dsim_remove_transfer(dsi, xfer);
+		dev_err(dsi->dev, "xfer timed out: %*ph %*ph\n", 4, pkt->header,
+			(int)pkt->payload_length, pkt->payload);
+		return -ETIMEDOUT;
+	}
+
+	/* Also covers hardware timeout condition */
+	return xfer->result;
+}
+
+static irqreturn_t samsung_dsim_irq(int irq, void *dev_id)
+{
+	struct samsung_dsim *dsi = dev_id;
+	u32 status;
+
+	status = samsung_dsim_read(dsi, DSIM_INTSRC_REG);
+	if (!status) {
+		static unsigned long j;
+
+		if (printk_timed_ratelimit(&j, 500))
+			dev_warn(dsi->dev, "spurious interrupt\n");
+		return IRQ_HANDLED;
+	}
+	samsung_dsim_write(dsi, DSIM_INTSRC_REG, status);
+
+	if (status & DSIM_INT_SW_RST_RELEASE) {
+		u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
+			DSIM_INT_SFR_HDR_FIFO_EMPTY | DSIM_INT_RX_ECC_ERR |
+			DSIM_INT_SW_RST_RELEASE);
+		samsung_dsim_write(dsi, DSIM_INTMSK_REG, mask);
+		complete(&dsi->completed);
+		return IRQ_HANDLED;
+	}
+
+	if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
+			DSIM_INT_PLL_STABLE)))
+		return IRQ_HANDLED;
+
+	if (samsung_dsim_transfer_finish(dsi))
+		samsung_dsim_transfer_start(dsi);
+
+	return IRQ_HANDLED;
+}
+
+static void samsung_dsim_enable_irq(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
+
+	enable_irq(dsi->irq);
+
+	if (pdata && pdata->irq_ops && pdata->irq_ops->enable)
+		pdata->irq_ops->enable(dsi);
+}
+
+static void samsung_dsim_disable_irq(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
+
+	if (pdata && pdata->irq_ops && pdata->irq_ops->disable)
+		pdata->irq_ops->disable(dsi);
+
+	disable_irq(dsi->irq);
+}
+
+static int samsung_dsim_init(struct samsung_dsim *dsi)
+{
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+
+	samsung_dsim_reset(dsi);
+	samsung_dsim_enable_irq(dsi);
+
+	if (driver_data->reg_values[RESET_TYPE] == DSIM_FUNCRST)
+		samsung_dsim_enable_lane(dsi, BIT(dsi->lanes) - 1);
+
+	samsung_dsim_enable_clock(dsi);
+	if (driver_data->wait_for_reset)
+		samsung_dsim_wait_for_reset(dsi);
+	samsung_dsim_set_phy_ctrl(dsi);
+	samsung_dsim_init_link(dsi);
+
+	return 0;
+}
+
+static void samsung_dsim_atomic_pre_enable(struct drm_bridge *bridge,
+					   struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+	int ret;
+
+	if (dsi->state & DSIM_STATE_ENABLED)
+		return;
+
+	ret = pm_runtime_resume_and_get(dsi->dev);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to enable DSI device.\n");
+		return;
+	}
+
+	dsi->state |= DSIM_STATE_ENABLED;
+}
+
+static void samsung_dsim_atomic_enable(struct drm_bridge *bridge,
+				       struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	samsung_dsim_set_display_mode(dsi);
+	samsung_dsim_set_display_enable(dsi, true);
+
+	dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
+}
+
+static void samsung_dsim_atomic_disable(struct drm_bridge *bridge,
+					struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	if (!(dsi->state & DSIM_STATE_ENABLED))
+		return;
+
+	dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
+}
+
+static void samsung_dsim_atomic_post_disable(struct drm_bridge *bridge,
+					     struct drm_bridge_state *old_bridge_state)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	samsung_dsim_set_display_enable(dsi, false);
+
+	dsi->state &= ~DSIM_STATE_ENABLED;
+	pm_runtime_put_sync(dsi->dev);
+}
+
+static void samsung_dsim_mode_set(struct drm_bridge *bridge,
+				  const struct drm_display_mode *mode,
+				  const struct drm_display_mode *adjusted_mode)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	drm_mode_copy(&dsi->mode, adjusted_mode);
+}
+
+static int samsung_dsim_attach(struct drm_bridge *bridge,
+			       enum drm_bridge_attach_flags flags)
+{
+	struct samsung_dsim *dsi = bridge_to_dsi(bridge);
+
+	return drm_bridge_attach(bridge->encoder, dsi->out_bridge, bridge,
+				 flags);
+}
+
+static const struct drm_bridge_funcs samsung_dsim_bridge_funcs = {
+	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset			= drm_atomic_helper_bridge_reset,
+	.atomic_pre_enable		= samsung_dsim_atomic_pre_enable,
+	.atomic_enable			= samsung_dsim_atomic_enable,
+	.atomic_disable			= samsung_dsim_atomic_disable,
+	.atomic_post_disable		= samsung_dsim_atomic_post_disable,
+	.mode_set			= samsung_dsim_mode_set,
+	.attach				= samsung_dsim_attach,
+};
+
+MODULE_DEVICE_TABLE(of, samsung_dsim_of_match);
+
+static int samsung_dsim_host_attach(struct mipi_dsi_host *host,
+				    struct mipi_dsi_device *device)
+{
+	struct samsung_dsim *dsi = host_to_dsi(host);
+	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
+	struct device *dev = dsi->dev;
+	struct drm_panel *panel;
+	int ret;
+
+	panel = of_drm_find_panel(device->dev.of_node);
+	if (!IS_ERR(panel)) {
+		dsi->out_bridge = devm_drm_panel_bridge_add(dev, panel);
+	} else {
+		dsi->out_bridge = of_drm_find_bridge(device->dev.of_node);
+		if (!dsi->out_bridge)
+			dsi->out_bridge = ERR_PTR(-EINVAL);
+	}
+
+	if (IS_ERR(dsi->out_bridge)) {
+		ret = PTR_ERR(dsi->out_bridge);
+		DRM_DEV_ERROR(dev, "failed to find the bridge: %d\n", ret);
+		return ret;
+	}
+
+	DRM_DEV_INFO(dev, "Attached %s device\n", device->name);
+
+	drm_bridge_add(&dsi->bridge);
+
+	if (pdata && pdata->host_ops && pdata->host_ops->attach) {
+		ret = pdata->host_ops->attach(dsi, device);
+		if (ret < 0)
+			return ret;
+	}
+
+	dsi->lanes = device->lanes;
+	dsi->format = device->format;
+	dsi->mode_flags = device->mode_flags;
+
+	return 0;
+}
+
+static int samsung_dsim_host_detach(struct mipi_dsi_host *host,
+				    struct mipi_dsi_device *device)
+{
+	struct samsung_dsim *dsi = host_to_dsi(host);
+	const struct samsung_dsim_plat_data *pdata = dsi->plat_data;
+	int ret;
+
+	if (dsi->out_bridge->funcs->detach)
+		dsi->out_bridge->funcs->detach(dsi->out_bridge);
+
+	dsi->out_bridge = NULL;
+
+	if (pdata && pdata->host_ops && pdata->host_ops->detach) {
+		ret = pdata->host_ops->detach(dsi, device);
+		if (ret < 0)
+			return ret;
+	}
+
+	drm_bridge_remove(&dsi->bridge);
+
+	return 0;
+}
+
+static ssize_t samsung_dsim_host_transfer(struct mipi_dsi_host *host,
+					  const struct mipi_dsi_msg *msg)
+{
+	struct samsung_dsim *dsi = host_to_dsi(host);
+	struct samsung_dsim_transfer xfer;
+	int ret;
+
+	if (!(dsi->state & DSIM_STATE_ENABLED))
+		return -EINVAL;
+
+	if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
+		ret = samsung_dsim_init(dsi);
+		if (ret)
+			return ret;
+		dsi->state |= DSIM_STATE_INITIALIZED;
+	}
+
+	ret = mipi_dsi_create_packet(&xfer.packet, msg);
+	if (ret < 0)
+		return ret;
+
+	xfer.rx_len = msg->rx_len;
+	xfer.rx_payload = msg->rx_buf;
+	xfer.flags = msg->flags;
+
+	ret = samsung_dsim_transfer(dsi, &xfer);
+	return (ret < 0) ? ret : xfer.rx_done;
+}
+
+static const struct mipi_dsi_host_ops samsung_dsim_ops = {
+	.attach = samsung_dsim_host_attach,
+	.detach = samsung_dsim_host_detach,
+	.transfer = samsung_dsim_host_transfer,
+};
+
+static int samsung_dsim_of_read_u32(const struct device_node *np,
+				    const char *propname, u32 *out_value)
+{
+	int ret = of_property_read_u32(np, propname, out_value);
+
+	if (ret < 0)
+		pr_err("%pOF: failed to get '%s' property\n", np, propname);
+
+	return ret;
+}
+
+static int samsung_dsim_parse_dt(struct samsung_dsim *dsi)
+{
+	struct device *dev = dsi->dev;
+	struct device_node *node = dev->of_node;
+	int ret;
+
+	ret = samsung_dsim_of_read_u32(node, "samsung,pll-clock-frequency",
+				       &dsi->pll_clk_rate);
+	if (ret < 0)
+		return ret;
+
+	ret = samsung_dsim_of_read_u32(node, "samsung,burst-clock-frequency",
+				       &dsi->burst_clk_rate);
+	if (ret < 0)
+		return ret;
+
+	ret = samsung_dsim_of_read_u32(node, "samsung,esc-clock-frequency",
+				       &dsi->esc_clk_rate);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+__weak int samsung_dsim_plat_probe(struct samsung_dsim *priv)
+{
+	return 0;
+}
+
+__weak void samsung_dsim_plat_remove(struct samsung_dsim *priv)
+{
+}
+
+static int samsung_dsim_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct samsung_dsim *dsi;
+	int ret, i;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	init_completion(&dsi->completed);
+	spin_lock_init(&dsi->transfer_lock);
+	INIT_LIST_HEAD(&dsi->transfer_list);
+
+	dsi->dsi_host.ops = &samsung_dsim_ops;
+	dsi->dsi_host.dev = dev;
+
+	dsi->dev = dev;
+	dsi->driver_data = of_device_get_match_data(dev);
+
+	dsi->supplies[0].supply = "vddcore";
+	dsi->supplies[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
+				      dsi->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get regulators\n");
+
+	dsi->clks = devm_kcalloc(dev, dsi->driver_data->num_clks,
+				 sizeof(*dsi->clks), GFP_KERNEL);
+	if (!dsi->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < dsi->driver_data->num_clks; i++) {
+		dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
+		if (IS_ERR(dsi->clks[i])) {
+			if (strcmp(clk_names[i], "sclk_mipi") == 0) {
+				dsi->clks[i] = devm_clk_get(dev, OLD_SCLK_MIPI_CLK_NAME);
+				if (!IS_ERR(dsi->clks[i]))
+					continue;
+			}
+
+			dev_info(dev, "failed to get the clock: %s\n", clk_names[i]);
+			return PTR_ERR(dsi->clks[i]);
+		}
+	}
+
+	dsi->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dsi->reg_base))
+		return PTR_ERR(dsi->reg_base);
+
+	dsi->phy = devm_phy_get(dev, "dsim");
+	if (IS_ERR(dsi->phy)) {
+		dev_info(dev, "failed to get dsim phy\n");
+		return PTR_ERR(dsi->phy);
+	}
+
+	dsi->irq = platform_get_irq(pdev, 0);
+	if (dsi->irq < 0)
+		return dsi->irq;
+
+	ret = devm_request_threaded_irq(dev, dsi->irq, NULL,
+					samsung_dsim_irq,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					dev_name(dev), dsi);
+	if (ret) {
+		dev_err(dev, "failed to request dsi irq\n");
+		return ret;
+	}
+
+	ret = samsung_dsim_parse_dt(dsi);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, dsi);
+
+	pm_runtime_enable(dev);
+
+	dsi->bridge.funcs = &samsung_dsim_bridge_funcs;
+	dsi->bridge.of_node = dev->of_node;
+	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+
+	ret = samsung_dsim_plat_probe(dsi);
+	if (ret)
+		goto err_disable_runtime;
+
+	return 0;
+
+err_disable_runtime:
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int samsung_dsim_remove(struct platform_device *pdev)
+{
+	struct samsung_dsim *dsi = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	samsung_dsim_plat_remove(dsi);
+
+	return 0;
+}
+
+static int __maybe_unused samsung_dsim_suspend(struct device *dev)
+{
+	struct samsung_dsim *dsi = dev_get_drvdata(dev);
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	int ret, i;
+
+	usleep_range(10000, 20000);
+
+	if (dsi->state & DSIM_STATE_INITIALIZED) {
+		dsi->state &= ~DSIM_STATE_INITIALIZED;
+
+		samsung_dsim_disable_clock(dsi);
+
+		samsung_dsim_disable_irq(dsi);
+	}
+
+	dsi->state &= ~DSIM_STATE_CMD_LPM;
+
+	phy_power_off(dsi->phy);
+
+	for (i = driver_data->num_clks - 1; i > -1; i--)
+		clk_disable_unprepare(dsi->clks[i]);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
+	if (ret < 0)
+		dev_err(dsi->dev, "cannot disable regulators %d\n", ret);
+
+	return 0;
+}
+
+static int __maybe_unused samsung_dsim_resume(struct device *dev)
+{
+	struct samsung_dsim *dsi = dev_get_drvdata(dev);
+	const struct samsung_dsim_driver_data *driver_data = dsi->driver_data;
+	int ret, i;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
+	if (ret < 0) {
+		dev_err(dsi->dev, "cannot enable regulators %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < driver_data->num_clks; i++) {
+		ret = clk_prepare_enable(dsi->clks[i]);
+		if (ret < 0)
+			goto err_clk;
+	}
+
+	ret = phy_power_on(dsi->phy);
+	if (ret < 0) {
+		dev_err(dsi->dev, "cannot enable phy %d\n", ret);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	while (--i > -1)
+		clk_disable_unprepare(dsi->clks[i]);
+	regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
+
+	return ret;
+}
+
+static const struct dev_pm_ops samsung_dsim_pm_ops = {
+	SET_RUNTIME_PM_OPS(samsung_dsim_suspend, samsung_dsim_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+struct platform_driver samsung_dsim_driver = {
+	.probe = samsung_dsim_probe,
+	.remove = samsung_dsim_remove,
+	.driver = {
+		   .name = "samsung-dsim",
+		   .owner = THIS_MODULE,
+		   .pm = &samsung_dsim_pm_ops,
+		   .of_match_table = samsung_dsim_of_match,
+	},
+};
+
+module_platform_driver(samsung_dsim_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
+MODULE_DESCRIPTION("Samsung MIPI DSIM controller bridge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 3d2f025d4fd4..a65acfed15b9 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -59,6 +59,7 @@  config DRM_EXYNOS_DSI
 	depends on DRM_EXYNOS_FIMD || DRM_EXYNOS5433_DECON || DRM_EXYNOS7_DECON
 	select DRM_MIPI_DSI
 	select DRM_PANEL
+	select DRM_SAMSUNG_DSIM
 	default n
 	help
 	  This enables support for Exynos MIPI-DSI device.
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 16c539657f73..9e3a0c8c7fdb 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -179,9 +179,6 @@  static struct exynos_drm_driver_info exynos_drm_drivers[] = {
 	}, {
 		DRV_PTR(dp_driver, CONFIG_DRM_EXYNOS_DP),
 		DRM_COMPONENT_DRIVER
-	}, {
-		DRV_PTR(dsi_driver, CONFIG_DRM_EXYNOS_DSI),
-		DRM_COMPONENT_DRIVER
 	}, {
 		DRV_PTR(mic_driver, CONFIG_DRM_EXYNOS_MIC),
 		DRM_COMPONENT_DRIVER
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
index 6ae9056e7a18..f005b9c8265e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
@@ -264,7 +264,6 @@  extern struct platform_driver fimd_driver;
 extern struct platform_driver exynos5433_decon_driver;
 extern struct platform_driver decon_driver;
 extern struct platform_driver dp_driver;
-extern struct platform_driver dsi_driver;
 extern struct platform_driver mixer_driver;
 extern struct platform_driver hdmi_driver;
 extern struct platform_driver vidi_driver;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index e5b1540c4ae4..bd443d3eedbe 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1,1341 +1,82 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Samsung SoC MIPI DSI Master driver.
+ * Samsung MIPI DSIM glue for Exynos SoCs.
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd
  *
  * Contacts: Tomasz Figa <t.figa@samsung.com>
-*/
+ */
 
-#include <linux/clk.h>
-#include <linux/delay.h>
 #include <linux/component.h>
 #include <linux/gpio/consumer.h>
-#include <linux/irq.h>
-#include <linux/of_device.h>
-#include <linux/of_graph.h>
-#include <linux/phy/phy.h>
-#include <linux/regulator/consumer.h>
 
-#include <asm/unaligned.h>
-
-#include <video/mipi_display.h>
-#include <video/videomode.h>
-
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_bridge.h>
-#include <drm/drm_mipi_dsi.h>
-#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
+#include <drm/bridge/samsung-dsim.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
 
 #include "exynos_drm_crtc.h"
 #include "exynos_drm_drv.h"
 
-/* returns true iff both arguments logically differs */
-#define NEQV(a, b) (!(a) ^ !(b))
-
-/* DSIM_STATUS */
-#define DSIM_STOP_STATE_DAT(x)		(((x) & 0xf) << 0)
-#define DSIM_STOP_STATE_CLK		(1 << 8)
-#define DSIM_TX_READY_HS_CLK		(1 << 10)
-#define DSIM_PLL_STABLE			(1 << 31)
-
-/* DSIM_SWRST */
-#define DSIM_FUNCRST			(1 << 16)
-#define DSIM_SWRST			(1 << 0)
-
-/* DSIM_TIMEOUT */
-#define DSIM_LPDR_TIMEOUT(x)		((x) << 0)
-#define DSIM_BTA_TIMEOUT(x)		((x) << 16)
-
-/* DSIM_CLKCTRL */
-#define DSIM_ESC_PRESCALER(x)		(((x) & 0xffff) << 0)
-#define DSIM_ESC_PRESCALER_MASK		(0xffff << 0)
-#define DSIM_LANE_ESC_CLK_EN_CLK	(1 << 19)
-#define DSIM_LANE_ESC_CLK_EN_DATA(x)	(((x) & 0xf) << 20)
-#define DSIM_LANE_ESC_CLK_EN_DATA_MASK	(0xf << 20)
-#define DSIM_BYTE_CLKEN			(1 << 24)
-#define DSIM_BYTE_CLK_SRC(x)		(((x) & 0x3) << 25)
-#define DSIM_BYTE_CLK_SRC_MASK		(0x3 << 25)
-#define DSIM_PLL_BYPASS			(1 << 27)
-#define DSIM_ESC_CLKEN			(1 << 28)
-#define DSIM_TX_REQUEST_HSCLK		(1 << 31)
-
-/* DSIM_CONFIG */
-#define DSIM_LANE_EN_CLK		(1 << 0)
-#define DSIM_LANE_EN(x)			(((x) & 0xf) << 1)
-#define DSIM_NUM_OF_DATA_LANE(x)	(((x) & 0x3) << 5)
-#define DSIM_SUB_PIX_FORMAT(x)		(((x) & 0x7) << 8)
-#define DSIM_MAIN_PIX_FORMAT_MASK	(0x7 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB888	(0x7 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB666	(0x6 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB666_P	(0x5 << 12)
-#define DSIM_MAIN_PIX_FORMAT_RGB565	(0x4 << 12)
-#define DSIM_SUB_VC			(((x) & 0x3) << 16)
-#define DSIM_MAIN_VC			(((x) & 0x3) << 18)
-#define DSIM_HSA_MODE			(1 << 20)
-#define DSIM_HBP_MODE			(1 << 21)
-#define DSIM_HFP_MODE			(1 << 22)
-#define DSIM_HSE_MODE			(1 << 23)
-#define DSIM_AUTO_MODE			(1 << 24)
-#define DSIM_VIDEO_MODE			(1 << 25)
-#define DSIM_BURST_MODE			(1 << 26)
-#define DSIM_SYNC_INFORM		(1 << 27)
-#define DSIM_EOT_DISABLE		(1 << 28)
-#define DSIM_MFLUSH_VS			(1 << 29)
-/* This flag is valid only for exynos3250/3472/5260/5430 */
-#define DSIM_CLKLANE_STOP		(1 << 30)
-
-/* DSIM_ESCMODE */
-#define DSIM_TX_TRIGGER_RST		(1 << 4)
-#define DSIM_TX_LPDT_LP			(1 << 6)
-#define DSIM_CMD_LPDT_LP		(1 << 7)
-#define DSIM_FORCE_BTA			(1 << 16)
-#define DSIM_FORCE_STOP_STATE		(1 << 20)
-#define DSIM_STOP_STATE_CNT(x)		(((x) & 0x7ff) << 21)
-#define DSIM_STOP_STATE_CNT_MASK	(0x7ff << 21)
-
-/* DSIM_MDRESOL */
-#define DSIM_MAIN_STAND_BY		(1 << 31)
-#define DSIM_MAIN_VRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 16)
-#define DSIM_MAIN_HRESOL(x, num_bits)	(((x) & ((1 << (num_bits)) - 1)) << 0)
-
-/* DSIM_MVPORCH */
-#define DSIM_CMD_ALLOW(x)		((x) << 28)
-#define DSIM_STABLE_VFP(x)		((x) << 16)
-#define DSIM_MAIN_VBP(x)		((x) << 0)
-#define DSIM_CMD_ALLOW_MASK		(0xf << 28)
-#define DSIM_STABLE_VFP_MASK		(0x7ff << 16)
-#define DSIM_MAIN_VBP_MASK		(0x7ff << 0)
-
-/* DSIM_MHPORCH */
-#define DSIM_MAIN_HFP(x)		((x) << 16)
-#define DSIM_MAIN_HBP(x)		((x) << 0)
-#define DSIM_MAIN_HFP_MASK		((0xffff) << 16)
-#define DSIM_MAIN_HBP_MASK		((0xffff) << 0)
-
-/* DSIM_MSYNC */
-#define DSIM_MAIN_VSA(x)		((x) << 22)
-#define DSIM_MAIN_HSA(x)		((x) << 0)
-#define DSIM_MAIN_VSA_MASK		((0x3ff) << 22)
-#define DSIM_MAIN_HSA_MASK		((0xffff) << 0)
-
-/* DSIM_SDRESOL */
-#define DSIM_SUB_STANDY(x)		((x) << 31)
-#define DSIM_SUB_VRESOL(x)		((x) << 16)
-#define DSIM_SUB_HRESOL(x)		((x) << 0)
-#define DSIM_SUB_STANDY_MASK		((0x1) << 31)
-#define DSIM_SUB_VRESOL_MASK		((0x7ff) << 16)
-#define DSIM_SUB_HRESOL_MASK		((0x7ff) << 0)
-
-/* DSIM_INTSRC */
-#define DSIM_INT_PLL_STABLE		(1 << 31)
-#define DSIM_INT_SW_RST_RELEASE		(1 << 30)
-#define DSIM_INT_SFR_FIFO_EMPTY		(1 << 29)
-#define DSIM_INT_SFR_HDR_FIFO_EMPTY	(1 << 28)
-#define DSIM_INT_BTA			(1 << 25)
-#define DSIM_INT_FRAME_DONE		(1 << 24)
-#define DSIM_INT_RX_TIMEOUT		(1 << 21)
-#define DSIM_INT_BTA_TIMEOUT		(1 << 20)
-#define DSIM_INT_RX_DONE		(1 << 18)
-#define DSIM_INT_RX_TE			(1 << 17)
-#define DSIM_INT_RX_ACK			(1 << 16)
-#define DSIM_INT_RX_ECC_ERR		(1 << 15)
-#define DSIM_INT_RX_CRC_ERR		(1 << 14)
-
-/* DSIM_FIFOCTRL */
-#define DSIM_RX_DATA_FULL		(1 << 25)
-#define DSIM_RX_DATA_EMPTY		(1 << 24)
-#define DSIM_SFR_HEADER_FULL		(1 << 23)
-#define DSIM_SFR_HEADER_EMPTY		(1 << 22)
-#define DSIM_SFR_PAYLOAD_FULL		(1 << 21)
-#define DSIM_SFR_PAYLOAD_EMPTY		(1 << 20)
-#define DSIM_I80_HEADER_FULL		(1 << 19)
-#define DSIM_I80_HEADER_EMPTY		(1 << 18)
-#define DSIM_I80_PAYLOAD_FULL		(1 << 17)
-#define DSIM_I80_PAYLOAD_EMPTY		(1 << 16)
-#define DSIM_SD_HEADER_FULL		(1 << 15)
-#define DSIM_SD_HEADER_EMPTY		(1 << 14)
-#define DSIM_SD_PAYLOAD_FULL		(1 << 13)
-#define DSIM_SD_PAYLOAD_EMPTY		(1 << 12)
-#define DSIM_MD_HEADER_FULL		(1 << 11)
-#define DSIM_MD_HEADER_EMPTY		(1 << 10)
-#define DSIM_MD_PAYLOAD_FULL		(1 << 9)
-#define DSIM_MD_PAYLOAD_EMPTY		(1 << 8)
-#define DSIM_RX_FIFO			(1 << 4)
-#define DSIM_SFR_FIFO			(1 << 3)
-#define DSIM_I80_FIFO			(1 << 2)
-#define DSIM_SD_FIFO			(1 << 1)
-#define DSIM_MD_FIFO			(1 << 0)
-
-/* DSIM_PHYACCHR */
-#define DSIM_AFC_EN			(1 << 14)
-#define DSIM_AFC_CTL(x)			(((x) & 0x7) << 5)
-
-/* DSIM_PLLCTRL */
-#define DSIM_FREQ_BAND(x)		((x) << 24)
-#define DSIM_PLL_EN			(1 << 23)
-#define DSIM_PLL_P(x)			((x) << 13)
-#define DSIM_PLL_M(x)			((x) << 4)
-#define DSIM_PLL_S(x)			((x) << 1)
-
-/* DSIM_PHYCTRL */
-#define DSIM_PHYCTRL_ULPS_EXIT(x)	(((x) & 0x1ff) << 0)
-#define DSIM_PHYCTRL_B_DPHYCTL_VREG_LP	(1 << 30)
-#define DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP	(1 << 14)
-
-/* DSIM_PHYTIMING */
-#define DSIM_PHYTIMING_LPX(x)		((x) << 8)
-#define DSIM_PHYTIMING_HS_EXIT(x)	((x) << 0)
-
-/* DSIM_PHYTIMING1 */
-#define DSIM_PHYTIMING1_CLK_PREPARE(x)	((x) << 24)
-#define DSIM_PHYTIMING1_CLK_ZERO(x)	((x) << 16)
-#define DSIM_PHYTIMING1_CLK_POST(x)	((x) << 8)
-#define DSIM_PHYTIMING1_CLK_TRAIL(x)	((x) << 0)
-
-/* DSIM_PHYTIMING2 */
-#define DSIM_PHYTIMING2_HS_PREPARE(x)	((x) << 16)
-#define DSIM_PHYTIMING2_HS_ZERO(x)	((x) << 8)
-#define DSIM_PHYTIMING2_HS_TRAIL(x)	((x) << 0)
-
-#define DSI_MAX_BUS_WIDTH		4
-#define DSI_NUM_VIRTUAL_CHANNELS	4
-#define DSI_TX_FIFO_SIZE		2048
-#define DSI_RX_FIFO_SIZE		256
-#define DSI_XFER_TIMEOUT_MS		100
-#define DSI_RX_FIFO_EMPTY		0x30800002
-
-#define OLD_SCLK_MIPI_CLK_NAME "pll_clk"
-
-static const char *const clk_names[5] = { "bus_clk", "sclk_mipi",
-	"phyclk_mipidphy0_bitclkdiv8", "phyclk_mipidphy0_rxclkesc0",
-	"sclk_rgb_vclk_to_dsim0" };
-
-enum exynos_dsi_transfer_type {
-	EXYNOS_DSI_TX,
-	EXYNOS_DSI_RX,
-};
-
-struct exynos_dsi_transfer {
-	struct list_head list;
-	struct completion completed;
-	int result;
-	struct mipi_dsi_packet packet;
-	u16 flags;
-	u16 tx_done;
-
-	u8 *rx_payload;
-	u16 rx_len;
-	u16 rx_done;
-};
-
-#define DSIM_STATE_ENABLED		BIT(0)
-#define DSIM_STATE_INITIALIZED		BIT(1)
-#define DSIM_STATE_CMD_LPM		BIT(2)
-#define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
-
-struct exynos_dsi_driver_data {
-	const unsigned int *reg_ofs;
-	unsigned int plltmr_reg;
-	unsigned int has_freqband:1;
-	unsigned int has_clklane_stop:1;
-	unsigned int num_clks;
-	unsigned int max_freq;
-	unsigned int wait_for_reset;
-	unsigned int num_bits_resol;
-	const unsigned int *reg_values;
-};
-
 struct exynos_dsi {
 	struct drm_encoder encoder;
-	struct mipi_dsi_host dsi_host;
-	struct drm_bridge bridge;
-	struct drm_bridge *out_bridge;
-	struct device *dev;
-	struct drm_display_mode mode;
+	struct samsung_dsim *priv;
 
-	void __iomem *reg_base;
-	struct phy *phy;
-	struct clk **clks;
-	struct regulator_bulk_data supplies[2];
-	int irq;
 	struct gpio_desc *te_gpio;
 
-	u32 pll_clk_rate;
-	u32 burst_clk_rate;
-	u32 esc_clk_rate;
-	u32 lanes;
-	u32 mode_flags;
-	u32 format;
-
-	int state;
-	struct drm_property *brightness;
-	struct completion completed;
-
-	spinlock_t transfer_lock; /* protects transfer_list */
-	struct list_head transfer_list;
-
-	const struct exynos_dsi_driver_data *driver_data;
+	struct samsung_dsim_plat_data pdata;
 };
 
-#define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
-
-static inline struct exynos_dsi *bridge_to_dsi(struct drm_bridge *b)
+static inline struct  exynos_dsi *pdata_to_dsi(const struct samsung_dsim_plat_data *p)
 {
-	return container_of(b, struct exynos_dsi, bridge);
-}
-
-enum reg_idx {
-	DSIM_STATUS_REG,	/* Status register */
-	DSIM_SWRST_REG,		/* Software reset register */
-	DSIM_CLKCTRL_REG,	/* Clock control register */
-	DSIM_TIMEOUT_REG,	/* Time out register */
-	DSIM_CONFIG_REG,	/* Configuration register */
-	DSIM_ESCMODE_REG,	/* Escape mode register */
-	DSIM_MDRESOL_REG,
-	DSIM_MVPORCH_REG,	/* Main display Vporch register */
-	DSIM_MHPORCH_REG,	/* Main display Hporch register */
-	DSIM_MSYNC_REG,		/* Main display sync area register */
-	DSIM_INTSRC_REG,	/* Interrupt source register */
-	DSIM_INTMSK_REG,	/* Interrupt mask register */
-	DSIM_PKTHDR_REG,	/* Packet Header FIFO register */
-	DSIM_PAYLOAD_REG,	/* Payload FIFO register */
-	DSIM_RXFIFO_REG,	/* Read FIFO register */
-	DSIM_FIFOCTRL_REG,	/* FIFO status and control register */
-	DSIM_PLLCTRL_REG,	/* PLL control register */
-	DSIM_PHYCTRL_REG,
-	DSIM_PHYTIMING_REG,
-	DSIM_PHYTIMING1_REG,
-	DSIM_PHYTIMING2_REG,
-	NUM_REGS
-};
-
-static inline void exynos_dsi_write(struct exynos_dsi *dsi, enum reg_idx idx,
-				    u32 val)
-{
-
-	writel(val, dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
+	return container_of(p, struct  exynos_dsi, pdata);
 }
 
-static inline u32 exynos_dsi_read(struct exynos_dsi *dsi, enum reg_idx idx)
+static void exynos_dsi_enable_irq(struct samsung_dsim *priv)
 {
-	return readl(dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
-}
-
-static const unsigned int exynos_reg_ofs[] = {
-	[DSIM_STATUS_REG] =  0x00,
-	[DSIM_SWRST_REG] =  0x04,
-	[DSIM_CLKCTRL_REG] =  0x08,
-	[DSIM_TIMEOUT_REG] =  0x0c,
-	[DSIM_CONFIG_REG] =  0x10,
-	[DSIM_ESCMODE_REG] =  0x14,
-	[DSIM_MDRESOL_REG] =  0x18,
-	[DSIM_MVPORCH_REG] =  0x1c,
-	[DSIM_MHPORCH_REG] =  0x20,
-	[DSIM_MSYNC_REG] =  0x24,
-	[DSIM_INTSRC_REG] =  0x2c,
-	[DSIM_INTMSK_REG] =  0x30,
-	[DSIM_PKTHDR_REG] =  0x34,
-	[DSIM_PAYLOAD_REG] =  0x38,
-	[DSIM_RXFIFO_REG] =  0x3c,
-	[DSIM_FIFOCTRL_REG] =  0x44,
-	[DSIM_PLLCTRL_REG] =  0x4c,
-	[DSIM_PHYCTRL_REG] =  0x5c,
-	[DSIM_PHYTIMING_REG] =  0x64,
-	[DSIM_PHYTIMING1_REG] =  0x68,
-	[DSIM_PHYTIMING2_REG] =  0x6c,
-};
-
-static const unsigned int exynos5433_reg_ofs[] = {
-	[DSIM_STATUS_REG] = 0x04,
-	[DSIM_SWRST_REG] = 0x0C,
-	[DSIM_CLKCTRL_REG] = 0x10,
-	[DSIM_TIMEOUT_REG] = 0x14,
-	[DSIM_CONFIG_REG] = 0x18,
-	[DSIM_ESCMODE_REG] = 0x1C,
-	[DSIM_MDRESOL_REG] = 0x20,
-	[DSIM_MVPORCH_REG] = 0x24,
-	[DSIM_MHPORCH_REG] = 0x28,
-	[DSIM_MSYNC_REG] = 0x2C,
-	[DSIM_INTSRC_REG] = 0x34,
-	[DSIM_INTMSK_REG] = 0x38,
-	[DSIM_PKTHDR_REG] = 0x3C,
-	[DSIM_PAYLOAD_REG] = 0x40,
-	[DSIM_RXFIFO_REG] = 0x44,
-	[DSIM_FIFOCTRL_REG] = 0x4C,
-	[DSIM_PLLCTRL_REG] = 0x94,
-	[DSIM_PHYCTRL_REG] = 0xA4,
-	[DSIM_PHYTIMING_REG] = 0xB4,
-	[DSIM_PHYTIMING1_REG] = 0xB8,
-	[DSIM_PHYTIMING2_REG] = 0xBC,
-};
-
-enum reg_value_idx {
-	RESET_TYPE,
-	PLL_TIMER,
-	STOP_STATE_CNT,
-	PHYCTRL_ULPS_EXIT,
-	PHYCTRL_VREG_LP,
-	PHYCTRL_SLEW_UP,
-	PHYTIMING_LPX,
-	PHYTIMING_HS_EXIT,
-	PHYTIMING_CLK_PREPARE,
-	PHYTIMING_CLK_ZERO,
-	PHYTIMING_CLK_POST,
-	PHYTIMING_CLK_TRAIL,
-	PHYTIMING_HS_PREPARE,
-	PHYTIMING_HS_ZERO,
-	PHYTIMING_HS_TRAIL
-};
-
-static const unsigned int reg_values[] = {
-	[RESET_TYPE] = DSIM_SWRST,
-	[PLL_TIMER] = 500,
-	[STOP_STATE_CNT] = 0xf,
-	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x0af),
-	[PHYCTRL_VREG_LP] = 0,
-	[PHYCTRL_SLEW_UP] = 0,
-	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
-	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
-	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
-	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x27),
-	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
-	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
-	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x09),
-	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
-	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
-};
-
-static const unsigned int exynos5422_reg_values[] = {
-	[RESET_TYPE] = DSIM_SWRST,
-	[PLL_TIMER] = 500,
-	[STOP_STATE_CNT] = 0xf,
-	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0xaf),
-	[PHYCTRL_VREG_LP] = 0,
-	[PHYCTRL_SLEW_UP] = 0,
-	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x08),
-	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0d),
-	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
-	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x30),
-	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
-	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x0a),
-	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0c),
-	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x11),
-	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0d),
-};
-
-static const unsigned int exynos5433_reg_values[] = {
-	[RESET_TYPE] = DSIM_FUNCRST,
-	[PLL_TIMER] = 22200,
-	[STOP_STATE_CNT] = 0xa,
-	[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x190),
-	[PHYCTRL_VREG_LP] = DSIM_PHYCTRL_B_DPHYCTL_VREG_LP,
-	[PHYCTRL_SLEW_UP] = DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP,
-	[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x07),
-	[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0c),
-	[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
-	[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x2d),
-	[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
-	[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x09),
-	[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0b),
-	[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x10),
-	[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
-};
-
-static const struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
-	.reg_ofs = exynos_reg_ofs,
-	.plltmr_reg = 0x50,
-	.has_freqband = 1,
-	.has_clklane_stop = 1,
-	.num_clks = 2,
-	.max_freq = 1000,
-	.wait_for_reset = 1,
-	.num_bits_resol = 11,
-	.reg_values = reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
-	.reg_ofs = exynos_reg_ofs,
-	.plltmr_reg = 0x50,
-	.has_freqband = 1,
-	.has_clklane_stop = 1,
-	.num_clks = 2,
-	.max_freq = 1000,
-	.wait_for_reset = 1,
-	.num_bits_resol = 11,
-	.reg_values = reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
-	.reg_ofs = exynos_reg_ofs,
-	.plltmr_reg = 0x58,
-	.num_clks = 2,
-	.max_freq = 1000,
-	.wait_for_reset = 1,
-	.num_bits_resol = 11,
-	.reg_values = reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
-	.reg_ofs = exynos5433_reg_ofs,
-	.plltmr_reg = 0xa0,
-	.has_clklane_stop = 1,
-	.num_clks = 5,
-	.max_freq = 1500,
-	.wait_for_reset = 0,
-	.num_bits_resol = 12,
-	.reg_values = exynos5433_reg_values,
-};
-
-static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
-	.reg_ofs = exynos5433_reg_ofs,
-	.plltmr_reg = 0xa0,
-	.has_clklane_stop = 1,
-	.num_clks = 2,
-	.max_freq = 1500,
-	.wait_for_reset = 1,
-	.num_bits_resol = 12,
-	.reg_values = exynos5422_reg_values,
-};
-
-static const struct of_device_id exynos_dsi_of_match[] = {
-	{ .compatible = "samsung,exynos3250-mipi-dsi",
-	  .data = &exynos3_dsi_driver_data },
-	{ .compatible = "samsung,exynos4210-mipi-dsi",
-	  .data = &exynos4_dsi_driver_data },
-	{ .compatible = "samsung,exynos5410-mipi-dsi",
-	  .data = &exynos5_dsi_driver_data },
-	{ .compatible = "samsung,exynos5422-mipi-dsi",
-	  .data = &exynos5422_dsi_driver_data },
-	{ .compatible = "samsung,exynos5433-mipi-dsi",
-	  .data = &exynos5433_dsi_driver_data },
-	{ }
-};
-
-static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
-{
-	if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
-		return;
-
-	dev_err(dsi->dev, "timeout waiting for reset\n");
-}
-
-static void exynos_dsi_reset(struct exynos_dsi *dsi)
-{
-	u32 reset_val = dsi->driver_data->reg_values[RESET_TYPE];
-
-	reinit_completion(&dsi->completed);
-	exynos_dsi_write(dsi, DSIM_SWRST_REG, reset_val);
-}
-
-#ifndef MHZ
-#define MHZ	(1000*1000)
-#endif
-
-static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
-		unsigned long fin, unsigned long fout, u8 *p, u16 *m, u8 *s)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	unsigned long best_freq = 0;
-	u32 min_delta = 0xffffffff;
-	u8 p_min, p_max;
-	u8 _p, best_p;
-	u16 _m, best_m;
-	u8 _s, best_s;
-
-	p_min = DIV_ROUND_UP(fin, (12 * MHZ));
-	p_max = fin / (6 * MHZ);
-
-	for (_p = p_min; _p <= p_max; ++_p) {
-		for (_s = 0; _s <= 5; ++_s) {
-			u64 tmp;
-			u32 delta;
-
-			tmp = (u64)fout * (_p << _s);
-			do_div(tmp, fin);
-			_m = tmp;
-			if (_m < 41 || _m > 125)
-				continue;
-
-			tmp = (u64)_m * fin;
-			do_div(tmp, _p);
-			if (tmp < 500 * MHZ ||
-					tmp > driver_data->max_freq * MHZ)
-				continue;
-
-			tmp = (u64)_m * fin;
-			do_div(tmp, _p << _s);
-
-			delta = abs(fout - tmp);
-			if (delta < min_delta) {
-				best_p = _p;
-				best_m = _m;
-				best_s = _s;
-				min_delta = delta;
-				best_freq = tmp;
-			}
-		}
-	}
-
-	if (best_freq) {
-		*p = best_p;
-		*m = best_m;
-		*s = best_s;
-	}
-
-	return best_freq;
-}
-
-static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
-					unsigned long freq)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	unsigned long fin, fout;
-	int timeout;
-	u8 p, s;
-	u16 m;
-	u32 reg;
-
-	fin = dsi->pll_clk_rate;
-	fout = exynos_dsi_pll_find_pms(dsi, fin, freq, &p, &m, &s);
-	if (!fout) {
-		dev_err(dsi->dev,
-			"failed to find PLL PMS for requested frequency\n");
-		return 0;
-	}
-	dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
-
-	writel(driver_data->reg_values[PLL_TIMER],
-			dsi->reg_base + driver_data->plltmr_reg);
-
-	reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
-
-	if (driver_data->has_freqband) {
-		static const unsigned long freq_bands[] = {
-			100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
-			270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
-			510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
-			770 * MHZ, 870 * MHZ, 950 * MHZ,
-		};
-		int band;
-
-		for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
-			if (fout < freq_bands[band])
-				break;
-
-		dev_dbg(dsi->dev, "band %d\n", band);
-
-		reg |= DSIM_FREQ_BAND(band);
-	}
-
-	exynos_dsi_write(dsi, DSIM_PLLCTRL_REG, reg);
-
-	timeout = 1000;
-	do {
-		if (timeout-- == 0) {
-			dev_err(dsi->dev, "PLL failed to stabilize\n");
-			return 0;
-		}
-		reg = exynos_dsi_read(dsi, DSIM_STATUS_REG);
-	} while ((reg & DSIM_PLL_STABLE) == 0);
-
-	return fout;
-}
-
-static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
-{
-	unsigned long hs_clk, byte_clk, esc_clk;
-	unsigned long esc_div;
-	u32 reg;
-
-	hs_clk = exynos_dsi_set_pll(dsi, dsi->burst_clk_rate);
-	if (!hs_clk) {
-		dev_err(dsi->dev, "failed to configure DSI PLL\n");
-		return -EFAULT;
-	}
-
-	byte_clk = hs_clk / 8;
-	esc_div = DIV_ROUND_UP(byte_clk, dsi->esc_clk_rate);
-	esc_clk = byte_clk / esc_div;
-
-	if (esc_clk > 20 * MHZ) {
-		++esc_div;
-		esc_clk = byte_clk / esc_div;
-	}
-
-	dev_dbg(dsi->dev, "hs_clk = %lu, byte_clk = %lu, esc_clk = %lu\n",
-		hs_clk, byte_clk, esc_clk);
-
-	reg = exynos_dsi_read(dsi, DSIM_CLKCTRL_REG);
-	reg &= ~(DSIM_ESC_PRESCALER_MASK | DSIM_LANE_ESC_CLK_EN_CLK
-			| DSIM_LANE_ESC_CLK_EN_DATA_MASK | DSIM_PLL_BYPASS
-			| DSIM_BYTE_CLK_SRC_MASK);
-	reg |= DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN
-			| DSIM_ESC_PRESCALER(esc_div)
-			| DSIM_LANE_ESC_CLK_EN_CLK
-			| DSIM_LANE_ESC_CLK_EN_DATA(BIT(dsi->lanes) - 1)
-			| DSIM_BYTE_CLK_SRC(0)
-			| DSIM_TX_REQUEST_HSCLK;
-	exynos_dsi_write(dsi, DSIM_CLKCTRL_REG, reg);
-
-	return 0;
-}
-
-static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	const unsigned int *reg_values = driver_data->reg_values;
-	u32 reg;
-
-	if (driver_data->has_freqband)
-		return;
-
-	/* B D-PHY: D-PHY Master & Slave Analog Block control */
-	reg = reg_values[PHYCTRL_ULPS_EXIT] | reg_values[PHYCTRL_VREG_LP] |
-		reg_values[PHYCTRL_SLEW_UP];
-	exynos_dsi_write(dsi, DSIM_PHYCTRL_REG, reg);
-
-	/*
-	 * T LPX: Transmitted length of any Low-Power state period
-	 * T HS-EXIT: Time that the transmitter drives LP-11 following a HS
-	 *	burst
-	 */
-	reg = reg_values[PHYTIMING_LPX] | reg_values[PHYTIMING_HS_EXIT];
-	exynos_dsi_write(dsi, DSIM_PHYTIMING_REG, reg);
-
-	/*
-	 * T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
-	 *	Line state immediately before the HS-0 Line state starting the
-	 *	HS transmission
-	 * T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
-	 *	transmitting the Clock.
-	 * T CLK_POST: Time that the transmitter continues to send HS clock
-	 *	after the last associated Data Lane has transitioned to LP Mode
-	 *	Interval is defined as the period from the end of T HS-TRAIL to
-	 *	the beginning of T CLK-TRAIL
-	 * T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
-	 *	the last payload clock bit of a HS transmission burst
-	 */
-	reg = reg_values[PHYTIMING_CLK_PREPARE] |
-		reg_values[PHYTIMING_CLK_ZERO] |
-		reg_values[PHYTIMING_CLK_POST] |
-		reg_values[PHYTIMING_CLK_TRAIL];
-
-	exynos_dsi_write(dsi, DSIM_PHYTIMING1_REG, reg);
-
-	/*
-	 * T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
-	 *	Line state immediately before the HS-0 Line state starting the
-	 *	HS transmission
-	 * T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
-	 *	transmitting the Sync sequence.
-	 * T HS-TRAIL: Time that the transmitter drives the flipped differential
-	 *	state after last payload data bit of a HS transmission burst
-	 */
-	reg = reg_values[PHYTIMING_HS_PREPARE] | reg_values[PHYTIMING_HS_ZERO] |
-		reg_values[PHYTIMING_HS_TRAIL];
-	exynos_dsi_write(dsi, DSIM_PHYTIMING2_REG, reg);
-}
-
-static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
-{
-	u32 reg;
-
-	reg = exynos_dsi_read(dsi, DSIM_CLKCTRL_REG);
-	reg &= ~(DSIM_LANE_ESC_CLK_EN_CLK | DSIM_LANE_ESC_CLK_EN_DATA_MASK
-			| DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN);
-	exynos_dsi_write(dsi, DSIM_CLKCTRL_REG, reg);
-
-	reg = exynos_dsi_read(dsi, DSIM_PLLCTRL_REG);
-	reg &= ~DSIM_PLL_EN;
-	exynos_dsi_write(dsi, DSIM_PLLCTRL_REG, reg);
-}
-
-static void exynos_dsi_enable_lane(struct exynos_dsi *dsi, u32 lane)
-{
-	u32 reg = exynos_dsi_read(dsi, DSIM_CONFIG_REG);
-	reg |= (DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1) | DSIM_LANE_EN_CLK |
-			DSIM_LANE_EN(lane));
-	exynos_dsi_write(dsi, DSIM_CONFIG_REG, reg);
-}
-
-static int exynos_dsi_init_link(struct exynos_dsi *dsi)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	int timeout;
-	u32 reg;
-	u32 lanes_mask;
-
-	/* Initialize FIFO pointers */
-	reg = exynos_dsi_read(dsi, DSIM_FIFOCTRL_REG);
-	reg &= ~0x1f;
-	exynos_dsi_write(dsi, DSIM_FIFOCTRL_REG, reg);
-
-	usleep_range(9000, 11000);
-
-	reg |= 0x1f;
-	exynos_dsi_write(dsi, DSIM_FIFOCTRL_REG, reg);
-	usleep_range(9000, 11000);
-
-	/* DSI configuration */
-	reg = 0;
-
-	/*
-	 * The first bit of mode_flags specifies display configuration.
-	 * If this bit is set[= MIPI_DSI_MODE_VIDEO], dsi will support video
-	 * mode, otherwise it will support command mode.
-	 */
-	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
-		reg |= DSIM_VIDEO_MODE;
-
-		/*
-		 * The user manual describes that following bits are ignored in
-		 * command mode.
-		 */
-		if (!(dsi->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
-			reg |= DSIM_MFLUSH_VS;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
-			reg |= DSIM_SYNC_INFORM;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
-			reg |= DSIM_BURST_MODE;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
-			reg |= DSIM_AUTO_MODE;
-		if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
-			reg |= DSIM_HSE_MODE;
-		if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HFP))
-			reg |= DSIM_HFP_MODE;
-		if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HBP))
-			reg |= DSIM_HBP_MODE;
-		if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_NO_HSA))
-			reg |= DSIM_HSA_MODE;
-	}
-
-	if (!(dsi->mode_flags & MIPI_DSI_MODE_NO_EOT_PACKET))
-		reg |= DSIM_EOT_DISABLE;
-
-	switch (dsi->format) {
-	case MIPI_DSI_FMT_RGB888:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB888;
-		break;
-	case MIPI_DSI_FMT_RGB666:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB666;
-		break;
-	case MIPI_DSI_FMT_RGB666_PACKED:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB666_P;
-		break;
-	case MIPI_DSI_FMT_RGB565:
-		reg |= DSIM_MAIN_PIX_FORMAT_RGB565;
-		break;
-	default:
-		dev_err(dsi->dev, "invalid pixel format\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Use non-continuous clock mode if the periparal wants and
-	 * host controller supports
-	 *
-	 * In non-continous clock mode, host controller will turn off
-	 * the HS clock between high-speed transmissions to reduce
-	 * power consumption.
-	 */
-	if (driver_data->has_clklane_stop &&
-			dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
-		reg |= DSIM_CLKLANE_STOP;
-	}
-	exynos_dsi_write(dsi, DSIM_CONFIG_REG, reg);
-
-	lanes_mask = BIT(dsi->lanes) - 1;
-	exynos_dsi_enable_lane(dsi, lanes_mask);
-
-	/* Check clock and data lane state are stop state */
-	timeout = 100;
-	do {
-		if (timeout-- == 0) {
-			dev_err(dsi->dev, "waiting for bus lanes timed out\n");
-			return -EFAULT;
-		}
-
-		reg = exynos_dsi_read(dsi, DSIM_STATUS_REG);
-		if ((reg & DSIM_STOP_STATE_DAT(lanes_mask))
-		    != DSIM_STOP_STATE_DAT(lanes_mask))
-			continue;
-	} while (!(reg & (DSIM_STOP_STATE_CLK | DSIM_TX_READY_HS_CLK)));
-
-	reg = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
-	reg &= ~DSIM_STOP_STATE_CNT_MASK;
-	reg |= DSIM_STOP_STATE_CNT(driver_data->reg_values[STOP_STATE_CNT]);
-	exynos_dsi_write(dsi, DSIM_ESCMODE_REG, reg);
-
-	reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
-	exynos_dsi_write(dsi, DSIM_TIMEOUT_REG, reg);
-
-	return 0;
-}
-
-static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
-{
-	struct drm_display_mode *m = &dsi->mode;
-	unsigned int num_bits_resol = dsi->driver_data->num_bits_resol;
-	u32 reg;
-
-	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
-		reg = DSIM_CMD_ALLOW(0xf)
-			| DSIM_STABLE_VFP(m->vsync_start - m->vdisplay)
-			| DSIM_MAIN_VBP(m->vtotal - m->vsync_end);
-		exynos_dsi_write(dsi, DSIM_MVPORCH_REG, reg);
-
-		reg = DSIM_MAIN_HFP(m->hsync_start - m->hdisplay)
-			| DSIM_MAIN_HBP(m->htotal - m->hsync_end);
-		exynos_dsi_write(dsi, DSIM_MHPORCH_REG, reg);
-
-		reg = DSIM_MAIN_VSA(m->vsync_end - m->vsync_start)
-			| DSIM_MAIN_HSA(m->hsync_end - m->hsync_start);
-		exynos_dsi_write(dsi, DSIM_MSYNC_REG, reg);
-	}
-	reg =  DSIM_MAIN_HRESOL(m->hdisplay, num_bits_resol) |
-		DSIM_MAIN_VRESOL(m->vdisplay, num_bits_resol);
-
-	exynos_dsi_write(dsi, DSIM_MDRESOL_REG, reg);
-
-	dev_dbg(dsi->dev, "LCD size = %dx%d\n", m->hdisplay, m->vdisplay);
-}
-
-static void exynos_dsi_set_display_enable(struct exynos_dsi *dsi, bool enable)
-{
-	u32 reg;
-
-	reg = exynos_dsi_read(dsi, DSIM_MDRESOL_REG);
-	if (enable)
-		reg |= DSIM_MAIN_STAND_BY;
-	else
-		reg &= ~DSIM_MAIN_STAND_BY;
-	exynos_dsi_write(dsi, DSIM_MDRESOL_REG, reg);
-}
-
-static int exynos_dsi_wait_for_hdr_fifo(struct exynos_dsi *dsi)
-{
-	int timeout = 2000;
-
-	do {
-		u32 reg = exynos_dsi_read(dsi, DSIM_FIFOCTRL_REG);
-
-		if (!(reg & DSIM_SFR_HEADER_FULL))
-			return 0;
-
-		if (!cond_resched())
-			usleep_range(950, 1050);
-	} while (--timeout);
-
-	return -ETIMEDOUT;
-}
-
-static void exynos_dsi_set_cmd_lpm(struct exynos_dsi *dsi, bool lpm)
-{
-	u32 v = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
-
-	if (lpm)
-		v |= DSIM_CMD_LPDT_LP;
-	else
-		v &= ~DSIM_CMD_LPDT_LP;
-
-	exynos_dsi_write(dsi, DSIM_ESCMODE_REG, v);
-}
-
-static void exynos_dsi_force_bta(struct exynos_dsi *dsi)
-{
-	u32 v = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
-	v |= DSIM_FORCE_BTA;
-	exynos_dsi_write(dsi, DSIM_ESCMODE_REG, v);
-}
-
-static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
-{
-	struct device *dev = dsi->dev;
-	struct mipi_dsi_packet *pkt = &xfer->packet;
-	const u8 *payload = pkt->payload + xfer->tx_done;
-	u16 length = pkt->payload_length - xfer->tx_done;
-	bool first = !xfer->tx_done;
-	u32 reg;
-
-	dev_dbg(dev, "< xfer %pK: tx len %u, done %u, rx len %u, done %u\n",
-		xfer, length, xfer->tx_done, xfer->rx_len, xfer->rx_done);
-
-	if (length > DSI_TX_FIFO_SIZE)
-		length = DSI_TX_FIFO_SIZE;
-
-	xfer->tx_done += length;
-
-	/* Send payload */
-	while (length >= 4) {
-		reg = get_unaligned_le32(payload);
-		exynos_dsi_write(dsi, DSIM_PAYLOAD_REG, reg);
-		payload += 4;
-		length -= 4;
-	}
-
-	reg = 0;
-	switch (length) {
-	case 3:
-		reg |= payload[2] << 16;
-		fallthrough;
-	case 2:
-		reg |= payload[1] << 8;
-		fallthrough;
-	case 1:
-		reg |= payload[0];
-		exynos_dsi_write(dsi, DSIM_PAYLOAD_REG, reg);
-		break;
-	}
-
-	/* Send packet header */
-	if (!first)
-		return;
-
-	reg = get_unaligned_le32(pkt->header);
-	if (exynos_dsi_wait_for_hdr_fifo(dsi)) {
-		dev_err(dev, "waiting for header FIFO timed out\n");
-		return;
-	}
-
-	if (NEQV(xfer->flags & MIPI_DSI_MSG_USE_LPM,
-		 dsi->state & DSIM_STATE_CMD_LPM)) {
-		exynos_dsi_set_cmd_lpm(dsi, xfer->flags & MIPI_DSI_MSG_USE_LPM);
-		dsi->state ^= DSIM_STATE_CMD_LPM;
-	}
-
-	exynos_dsi_write(dsi, DSIM_PKTHDR_REG, reg);
-
-	if (xfer->flags & MIPI_DSI_MSG_REQ_ACK)
-		exynos_dsi_force_bta(dsi);
-}
-
-static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
-{
-	u8 *payload = xfer->rx_payload + xfer->rx_done;
-	bool first = !xfer->rx_done;
-	struct device *dev = dsi->dev;
-	u16 length;
-	u32 reg;
-
-	if (first) {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-
-		switch (reg & 0x3f) {
-		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
-		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
-			if (xfer->rx_len >= 2) {
-				payload[1] = reg >> 16;
-				++xfer->rx_done;
-			}
-			fallthrough;
-		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
-		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
-			payload[0] = reg >> 8;
-			++xfer->rx_done;
-			xfer->rx_len = xfer->rx_done;
-			xfer->result = 0;
-			goto clear_fifo;
-		case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
-			dev_err(dev, "DSI Error Report: 0x%04x\n",
-				(reg >> 8) & 0xffff);
-			xfer->result = 0;
-			goto clear_fifo;
-		}
-
-		length = (reg >> 8) & 0xffff;
-		if (length > xfer->rx_len) {
-			dev_err(dev,
-				"response too long (%u > %u bytes), stripping\n",
-				xfer->rx_len, length);
-			length = xfer->rx_len;
-		} else if (length < xfer->rx_len)
-			xfer->rx_len = length;
-	}
-
-	length = xfer->rx_len - xfer->rx_done;
-	xfer->rx_done += length;
-
-	/* Receive payload */
-	while (length >= 4) {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-		payload[0] = (reg >>  0) & 0xff;
-		payload[1] = (reg >>  8) & 0xff;
-		payload[2] = (reg >> 16) & 0xff;
-		payload[3] = (reg >> 24) & 0xff;
-		payload += 4;
-		length -= 4;
-	}
-
-	if (length) {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-		switch (length) {
-		case 3:
-			payload[2] = (reg >> 16) & 0xff;
-			fallthrough;
-		case 2:
-			payload[1] = (reg >> 8) & 0xff;
-			fallthrough;
-		case 1:
-			payload[0] = reg & 0xff;
-		}
-	}
-
-	if (xfer->rx_done == xfer->rx_len)
-		xfer->result = 0;
+	const struct samsung_dsim_plat_data *pdata = priv->plat_data;
+	struct exynos_dsi *dsi = pdata_to_dsi(pdata);
 
-clear_fifo:
-	length = DSI_RX_FIFO_SIZE / 4;
-	do {
-		reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
-		if (reg == DSI_RX_FIFO_EMPTY)
-			break;
-	} while (--length);
-}
-
-static void exynos_dsi_transfer_start(struct exynos_dsi *dsi)
-{
-	unsigned long flags;
-	struct exynos_dsi_transfer *xfer;
-	bool start = false;
-
-again:
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	if (list_empty(&dsi->transfer_list)) {
-		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-		return;
-	}
-
-	xfer = list_first_entry(&dsi->transfer_list,
-					struct exynos_dsi_transfer, list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (xfer->packet.payload_length &&
-	    xfer->tx_done == xfer->packet.payload_length)
-		/* waiting for RX */
-		return;
-
-	exynos_dsi_send_to_fifo(dsi, xfer);
-
-	if (xfer->packet.payload_length || xfer->rx_len)
-		return;
-
-	xfer->result = 0;
-	complete(&xfer->completed);
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	list_del_init(&xfer->list);
-	start = !list_empty(&dsi->transfer_list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (start)
-		goto again;
-}
-
-static bool exynos_dsi_transfer_finish(struct exynos_dsi *dsi)
-{
-	struct exynos_dsi_transfer *xfer;
-	unsigned long flags;
-	bool start = true;
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	if (list_empty(&dsi->transfer_list)) {
-		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-		return false;
-	}
-
-	xfer = list_first_entry(&dsi->transfer_list,
-					struct exynos_dsi_transfer, list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	dev_dbg(dsi->dev,
-		"> xfer %pK, tx_len %zu, tx_done %u, rx_len %u, rx_done %u\n",
-		xfer, xfer->packet.payload_length, xfer->tx_done, xfer->rx_len,
-		xfer->rx_done);
-
-	if (xfer->tx_done != xfer->packet.payload_length)
-		return true;
-
-	if (xfer->rx_done != xfer->rx_len)
-		exynos_dsi_read_from_fifo(dsi, xfer);
-
-	if (xfer->rx_done != xfer->rx_len)
-		return true;
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	list_del_init(&xfer->list);
-	start = !list_empty(&dsi->transfer_list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (!xfer->rx_len)
-		xfer->result = 0;
-	complete(&xfer->completed);
-
-	return start;
-}
-
-static void exynos_dsi_remove_transfer(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
-{
-	unsigned long flags;
-	bool start;
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	if (!list_empty(&dsi->transfer_list) &&
-	    xfer == list_first_entry(&dsi->transfer_list,
-				     struct exynos_dsi_transfer, list)) {
-		list_del_init(&xfer->list);
-		start = !list_empty(&dsi->transfer_list);
-		spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-		if (start)
-			exynos_dsi_transfer_start(dsi);
-		return;
-	}
-
-	list_del_init(&xfer->list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
+	if (dsi->te_gpio)
+		enable_irq(gpiod_to_irq(dsi->te_gpio));
 }
 
-static int exynos_dsi_transfer(struct exynos_dsi *dsi,
-					struct exynos_dsi_transfer *xfer)
+static void exynos_dsi_disable_irq(struct samsung_dsim *priv)
 {
-	unsigned long flags;
-	bool stopped;
-
-	xfer->tx_done = 0;
-	xfer->rx_done = 0;
-	xfer->result = -ETIMEDOUT;
-	init_completion(&xfer->completed);
-
-	spin_lock_irqsave(&dsi->transfer_lock, flags);
-
-	stopped = list_empty(&dsi->transfer_list);
-	list_add_tail(&xfer->list, &dsi->transfer_list);
-
-	spin_unlock_irqrestore(&dsi->transfer_lock, flags);
-
-	if (stopped)
-		exynos_dsi_transfer_start(dsi);
-
-	wait_for_completion_timeout(&xfer->completed,
-				    msecs_to_jiffies(DSI_XFER_TIMEOUT_MS));
-	if (xfer->result == -ETIMEDOUT) {
-		struct mipi_dsi_packet *pkt = &xfer->packet;
-		exynos_dsi_remove_transfer(dsi, xfer);
-		dev_err(dsi->dev, "xfer timed out: %*ph %*ph\n", 4, pkt->header,
-			(int)pkt->payload_length, pkt->payload);
-		return -ETIMEDOUT;
-	}
+	const struct samsung_dsim_plat_data *pdata = priv->plat_data;
+	struct exynos_dsi *dsi = pdata_to_dsi(pdata);
 
-	/* Also covers hardware timeout condition */
-	return xfer->result;
+	if (dsi->te_gpio)
+		disable_irq(gpiod_to_irq(dsi->te_gpio));
 }
 
-static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
-{
-	struct exynos_dsi *dsi = dev_id;
-	u32 status;
-
-	status = exynos_dsi_read(dsi, DSIM_INTSRC_REG);
-	if (!status) {
-		static unsigned long int j;
-		if (printk_timed_ratelimit(&j, 500))
-			dev_warn(dsi->dev, "spurious interrupt\n");
-		return IRQ_HANDLED;
-	}
-	exynos_dsi_write(dsi, DSIM_INTSRC_REG, status);
-
-	if (status & DSIM_INT_SW_RST_RELEASE) {
-		u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
-			DSIM_INT_SFR_HDR_FIFO_EMPTY | DSIM_INT_RX_ECC_ERR |
-			DSIM_INT_SW_RST_RELEASE);
-		exynos_dsi_write(dsi, DSIM_INTMSK_REG, mask);
-		complete(&dsi->completed);
-		return IRQ_HANDLED;
-	}
-
-	if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
-			DSIM_INT_PLL_STABLE)))
-		return IRQ_HANDLED;
-
-	if (exynos_dsi_transfer_finish(dsi))
-		exynos_dsi_transfer_start(dsi);
-
-	return IRQ_HANDLED;
-}
+static const struct samsung_dsim_irq_ops samsung_dsim_exynos_host_irq = {
+	.enable = exynos_dsi_enable_irq,
+	.disable = exynos_dsi_disable_irq,
+};
 
 static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
 {
 	struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
+	struct samsung_dsim *priv = dsi->priv;
 	struct drm_encoder *encoder = &dsi->encoder;
 
-	if (dsi->state & DSIM_STATE_VIDOUT_AVAILABLE)
+	if (priv->state & DSIM_STATE_VIDOUT_AVAILABLE)
 		exynos_drm_crtc_te_handler(encoder->crtc);
 
 	return IRQ_HANDLED;
 }
 
-static void exynos_dsi_enable_irq(struct exynos_dsi *dsi)
-{
-	enable_irq(dsi->irq);
-
-	if (dsi->te_gpio)
-		enable_irq(gpiod_to_irq(dsi->te_gpio));
-}
-
-static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
-{
-	if (dsi->te_gpio)
-		disable_irq(gpiod_to_irq(dsi->te_gpio));
-
-	disable_irq(dsi->irq);
-}
-
-static int exynos_dsi_init(struct exynos_dsi *dsi)
-{
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-
-	exynos_dsi_reset(dsi);
-	exynos_dsi_enable_irq(dsi);
-
-	if (driver_data->reg_values[RESET_TYPE] == DSIM_FUNCRST)
-		exynos_dsi_enable_lane(dsi, BIT(dsi->lanes) - 1);
-
-	exynos_dsi_enable_clock(dsi);
-	if (driver_data->wait_for_reset)
-		exynos_dsi_wait_for_reset(dsi);
-	exynos_dsi_set_phy_ctrl(dsi);
-	exynos_dsi_init_link(dsi);
-
-	return 0;
-}
-
-static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi,
-				      struct device *panel)
+static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi, struct device *panel)
 {
-	int ret;
+	struct samsung_dsim *priv = dsi->priv;
 	int te_gpio_irq;
+	int ret;
 
-	dsi->te_gpio = gpiod_get_optional(panel, "te", GPIOD_IN);
+	dsi->te_gpio = devm_gpiod_get_optional(panel, "te", GPIOD_IN);
 	if (!dsi->te_gpio) {
 		return 0;
 	} else if (IS_ERR(dsi->te_gpio)) {
-		dev_err(dsi->dev, "gpio request failed with %ld\n",
+		dev_err(priv->dev, "gpio request failed with %ld\n",
 				PTR_ERR(dsi->te_gpio));
 		return PTR_ERR(dsi->te_gpio);
 	}
@@ -1345,7 +86,7 @@  static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi,
 	ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
 				   IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN, "TE", dsi);
 	if (ret) {
-		dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
+		dev_err(priv->dev, "request interrupt failed with %d\n", ret);
 		gpiod_put(dsi->te_gpio);
 		return ret;
 	}
@@ -1361,121 +102,15 @@  static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
 	}
 }
 
-static void exynos_dsi_atomic_pre_enable(struct drm_bridge *bridge,
-					 struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-	int ret;
-
-	if (dsi->state & DSIM_STATE_ENABLED)
-		return;
-
-	ret = pm_runtime_resume_and_get(dsi->dev);
-	if (ret < 0) {
-		dev_err(dsi->dev, "failed to enable DSI device.\n");
-		return;
-	}
-
-	dsi->state |= DSIM_STATE_ENABLED;
-}
-
-static void exynos_dsi_atomic_enable(struct drm_bridge *bridge,
-				     struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	exynos_dsi_set_display_mode(dsi);
-	exynos_dsi_set_display_enable(dsi, true);
-
-	dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
-
-	return;
-}
-
-static void exynos_dsi_atomic_disable(struct drm_bridge *bridge,
-				      struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	if (!(dsi->state & DSIM_STATE_ENABLED))
-		return;
-
-	dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
-}
-
-static void exynos_dsi_atomic_post_disable(struct drm_bridge *bridge,
-					   struct drm_bridge_state *old_bridge_state)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	exynos_dsi_set_display_enable(dsi, false);
-
-	dsi->state &= ~DSIM_STATE_ENABLED;
-	pm_runtime_put_sync(dsi->dev);
-}
-
-static void exynos_dsi_mode_set(struct drm_bridge *bridge,
-				const struct drm_display_mode *mode,
-				const struct drm_display_mode *adjusted_mode)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	drm_mode_copy(&dsi->mode, adjusted_mode);
-}
-
-static int exynos_dsi_attach(struct drm_bridge *bridge,
-			     enum drm_bridge_attach_flags flags)
-{
-	struct exynos_dsi *dsi = bridge_to_dsi(bridge);
-
-	return drm_bridge_attach(bridge->encoder, dsi->out_bridge, bridge,
-				 flags);
-}
-
-static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
-	.atomic_duplicate_state		= drm_atomic_helper_bridge_duplicate_state,
-	.atomic_destroy_state		= drm_atomic_helper_bridge_destroy_state,
-	.atomic_reset			= drm_atomic_helper_bridge_reset,
-	.atomic_pre_enable		= exynos_dsi_atomic_pre_enable,
-	.atomic_enable			= exynos_dsi_atomic_enable,
-	.atomic_disable			= exynos_dsi_atomic_disable,
-	.atomic_post_disable		= exynos_dsi_atomic_post_disable,
-	.mode_set			= exynos_dsi_mode_set,
-	.attach				= exynos_dsi_attach,
-};
-
-MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
-
-static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
-				  struct mipi_dsi_device *device)
+static int exynos_dsi_host_attach(struct samsung_dsim *priv, struct mipi_dsi_device *device)
 {
-	struct exynos_dsi *dsi = host_to_dsi(host);
-	struct device *dev = dsi->dev;
+	const struct samsung_dsim_plat_data *pdata = priv->plat_data;
+	struct exynos_dsi *dsi = pdata_to_dsi(pdata);
 	struct drm_encoder *encoder = &dsi->encoder;
 	struct drm_device *drm = encoder->dev;
-	struct drm_panel *panel;
 	int ret;
 
-	panel = of_drm_find_panel(device->dev.of_node);
-	if (!IS_ERR(panel)) {
-		dsi->out_bridge = devm_drm_panel_bridge_add(dev, panel);
-	} else {
-		dsi->out_bridge = of_drm_find_bridge(device->dev.of_node);
-		if (!dsi->out_bridge)
-			dsi->out_bridge = ERR_PTR(-EINVAL);
-	}
-
-	if (IS_ERR(dsi->out_bridge)) {
-		ret = PTR_ERR(dsi->out_bridge);
-		DRM_DEV_ERROR(dev, "failed to find the bridge: %d\n", ret);
-		return ret;
-	}
-
-	DRM_DEV_INFO(dev, "Attached %s device\n", device->name);
-
-	drm_bridge_add(&dsi->bridge);
-
-	drm_bridge_attach(encoder, &dsi->bridge,
+	drm_bridge_attach(encoder, &priv->bridge,
 			  list_first_entry_or_null(&encoder->bridge_chain,
 						   struct drm_bridge,
 						   chain_node), 0);
@@ -1494,11 +129,11 @@  static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 
 	mutex_lock(&drm->mode_config.mutex);
 
-	dsi->lanes = device->lanes;
-	dsi->format = device->format;
-	dsi->mode_flags = device->mode_flags;
+	priv->lanes = device->lanes;
+	priv->format = device->format;
+	priv->mode_flags = device->mode_flags;
 	exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
-			!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
+			!(priv->mode_flags & MIPI_DSI_MODE_VIDEO);
 
 	mutex_unlock(&drm->mode_config.mutex);
 
@@ -1508,100 +143,30 @@  static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
 	return 0;
 }
 
-static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
-				  struct mipi_dsi_device *device)
+static int exynos_dsi_host_detach(struct samsung_dsim *priv, struct mipi_dsi_device *device)
 {
-	struct exynos_dsi *dsi = host_to_dsi(host);
+	const struct samsung_dsim_plat_data *pdata = priv->plat_data;
+	struct exynos_dsi *dsi = pdata_to_dsi(pdata);
 	struct drm_device *drm = dsi->encoder.dev;
 
-	if (dsi->out_bridge->funcs->detach)
-		dsi->out_bridge->funcs->detach(dsi->out_bridge);
-	dsi->out_bridge = NULL;
-
 	if (drm->mode_config.poll_enabled)
 		drm_kms_helper_hotplug_event(drm);
 
 	exynos_dsi_unregister_te_irq(dsi);
 
-	drm_bridge_remove(&dsi->bridge);
-
 	return 0;
 }
 
-static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
-					 const struct mipi_dsi_msg *msg)
-{
-	struct exynos_dsi *dsi = host_to_dsi(host);
-	struct exynos_dsi_transfer xfer;
-	int ret;
-
-	if (!(dsi->state & DSIM_STATE_ENABLED))
-		return -EINVAL;
-
-	if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
-		ret = exynos_dsi_init(dsi);
-		if (ret)
-			return ret;
-		dsi->state |= DSIM_STATE_INITIALIZED;
-	}
-
-	ret = mipi_dsi_create_packet(&xfer.packet, msg);
-	if (ret < 0)
-		return ret;
-
-	xfer.rx_len = msg->rx_len;
-	xfer.rx_payload = msg->rx_buf;
-	xfer.flags = msg->flags;
-
-	ret = exynos_dsi_transfer(dsi, &xfer);
-	return (ret < 0) ? ret : xfer.rx_done;
-}
-
-static const struct mipi_dsi_host_ops exynos_dsi_ops = {
+static const struct samsung_dsim_host_ops samsung_dsim_exynos_host_ops = {
 	.attach = exynos_dsi_host_attach,
 	.detach = exynos_dsi_host_detach,
-	.transfer = exynos_dsi_host_transfer,
 };
 
-static int exynos_dsi_of_read_u32(const struct device_node *np,
-				  const char *propname, u32 *out_value)
-{
-	int ret = of_property_read_u32(np, propname, out_value);
-
-	if (ret < 0)
-		pr_err("%pOF: failed to get '%s' property\n", np, propname);
-
-	return ret;
-}
-
-static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
-{
-	struct device *dev = dsi->dev;
-	struct device_node *node = dev->of_node;
-	int ret;
-
-	ret = exynos_dsi_of_read_u32(node, "samsung,pll-clock-frequency",
-				     &dsi->pll_clk_rate);
-	if (ret < 0)
-		return ret;
-
-	ret = exynos_dsi_of_read_u32(node, "samsung,burst-clock-frequency",
-				     &dsi->burst_clk_rate);
-	if (ret < 0)
-		return ret;
-
-	ret = exynos_dsi_of_read_u32(node, "samsung,esc-clock-frequency",
-				     &dsi->esc_clk_rate);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int exynos_dsi_bind(struct device *dev, struct device *master,
-				void *data)
+static int exynos_dsi_bind(struct device *dev, struct device *master, void *data)
 {
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
+	struct samsung_dsim *priv = dev_get_drvdata(dev);
+	const struct samsung_dsim_plat_data *pdata = priv->plat_data;
+	struct exynos_dsi *dsi = pdata_to_dsi(pdata);
 	struct drm_encoder *encoder = &dsi->encoder;
 	struct drm_device *drm_dev = data;
 	int ret;
@@ -1612,17 +177,16 @@  static int exynos_dsi_bind(struct device *dev, struct device *master,
 	if (ret < 0)
 		return ret;
 
-	return mipi_dsi_host_register(&dsi->dsi_host);
+	return mipi_dsi_host_register(&priv->dsi_host);
 }
 
-static void exynos_dsi_unbind(struct device *dev, struct device *master,
-				void *data)
+static void exynos_dsi_unbind(struct device *dev, struct device *master, void *data)
 {
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
+	struct samsung_dsim *priv = dev_get_drvdata(dev);
 
-	exynos_dsi_atomic_disable(&dsi->bridge, NULL);
+	priv->bridge.funcs->atomic_disable(&priv->bridge, NULL);
 
-	mipi_dsi_host_unregister(&dsi->dsi_host);
+	mipi_dsi_host_unregister(&priv->dsi_host);
 }
 
 static const struct component_ops exynos_dsi_component_ops = {
@@ -1630,192 +194,33 @@  static const struct component_ops exynos_dsi_component_ops = {
 	.unbind	= exynos_dsi_unbind,
 };
 
-static int exynos_dsi_probe(struct platform_device *pdev)
+int samsung_dsim_plat_probe(struct samsung_dsim *priv)
 {
-	struct device *dev = &pdev->dev;
 	struct exynos_dsi *dsi;
-	int ret, i;
+	int ret;
 
-	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	dsi = devm_kzalloc(priv->dev, sizeof(*dsi), GFP_KERNEL);
 	if (!dsi)
 		return -ENOMEM;
 
-	init_completion(&dsi->completed);
-	spin_lock_init(&dsi->transfer_lock);
-	INIT_LIST_HEAD(&dsi->transfer_list);
-
-	dsi->dsi_host.ops = &exynos_dsi_ops;
-	dsi->dsi_host.dev = dev;
-
-	dsi->dev = dev;
-	dsi->driver_data = of_device_get_match_data(dev);
-
-	dsi->supplies[0].supply = "vddcore";
-	dsi->supplies[1].supply = "vddio";
-	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
-				      dsi->supplies);
-	if (ret)
-		return dev_err_probe(dev, ret, "failed to get regulators\n");
-
-	dsi->clks = devm_kcalloc(dev,
-			dsi->driver_data->num_clks, sizeof(*dsi->clks),
-			GFP_KERNEL);
-	if (!dsi->clks)
-		return -ENOMEM;
-
-	for (i = 0; i < dsi->driver_data->num_clks; i++) {
-		dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
-		if (IS_ERR(dsi->clks[i])) {
-			if (strcmp(clk_names[i], "sclk_mipi") == 0) {
-				dsi->clks[i] = devm_clk_get(dev,
-							OLD_SCLK_MIPI_CLK_NAME);
-				if (!IS_ERR(dsi->clks[i]))
-					continue;
-			}
-
-			dev_info(dev, "failed to get the clock: %s\n",
-					clk_names[i]);
-			return PTR_ERR(dsi->clks[i]);
-		}
-	}
-
-	dsi->reg_base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(dsi->reg_base))
-		return PTR_ERR(dsi->reg_base);
+	dsi->pdata.host_ops = &samsung_dsim_exynos_host_ops;
+	dsi->pdata.irq_ops = &samsung_dsim_exynos_host_irq;
+	dsi->priv = priv;
 
-	dsi->phy = devm_phy_get(dev, "dsim");
-	if (IS_ERR(dsi->phy)) {
-		dev_info(dev, "failed to get dsim phy\n");
-		return PTR_ERR(dsi->phy);
-	}
-
-	dsi->irq = platform_get_irq(pdev, 0);
-	if (dsi->irq < 0)
-		return dsi->irq;
+	priv->plat_data = &dsi->pdata;
 
-	ret = devm_request_threaded_irq(dev, dsi->irq, NULL,
-					exynos_dsi_irq,
-					IRQF_ONESHOT | IRQF_NO_AUTOEN,
-					dev_name(dev), dsi);
-	if (ret) {
-		dev_err(dev, "failed to request dsi irq\n");
-		return ret;
-	}
-
-	ret = exynos_dsi_parse_dt(dsi);
+	ret = component_add(priv->dev, &exynos_dsi_component_ops);
 	if (ret)
 		return ret;
 
-	platform_set_drvdata(pdev, dsi);
-
-	pm_runtime_enable(dev);
-
-	dsi->bridge.funcs = &exynos_dsi_bridge_funcs;
-	dsi->bridge.of_node = dev->of_node;
-	dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
-
-	ret = component_add(dev, &exynos_dsi_component_ops);
-	if (ret)
-		goto err_disable_runtime;
-
-	return 0;
-
-err_disable_runtime:
-	pm_runtime_disable(dev);
-
-	return ret;
-}
-
-static int exynos_dsi_remove(struct platform_device *pdev)
-{
-	pm_runtime_disable(&pdev->dev);
-
-	component_del(&pdev->dev, &exynos_dsi_component_ops);
-
-	return 0;
-}
-
-static int __maybe_unused exynos_dsi_suspend(struct device *dev)
-{
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	int ret, i;
-
-	usleep_range(10000, 20000);
-
-	if (dsi->state & DSIM_STATE_INITIALIZED) {
-		dsi->state &= ~DSIM_STATE_INITIALIZED;
-
-		exynos_dsi_disable_clock(dsi);
-
-		exynos_dsi_disable_irq(dsi);
-	}
-
-	dsi->state &= ~DSIM_STATE_CMD_LPM;
-
-	phy_power_off(dsi->phy);
-
-	for (i = driver_data->num_clks - 1; i > -1; i--)
-		clk_disable_unprepare(dsi->clks[i]);
-
-	ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
-	if (ret < 0)
-		dev_err(dsi->dev, "cannot disable regulators %d\n", ret);
-
 	return 0;
 }
 
-static int __maybe_unused exynos_dsi_resume(struct device *dev)
+void samsung_dsim_plat_remove(struct samsung_dsim *priv)
 {
-	struct exynos_dsi *dsi = dev_get_drvdata(dev);
-	const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
-	int ret, i;
-
-	ret = regulator_bulk_enable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
-	if (ret < 0) {
-		dev_err(dsi->dev, "cannot enable regulators %d\n", ret);
-		return ret;
-	}
-
-	for (i = 0; i < driver_data->num_clks; i++) {
-		ret = clk_prepare_enable(dsi->clks[i]);
-		if (ret < 0)
-			goto err_clk;
-	}
-
-	ret = phy_power_on(dsi->phy);
-	if (ret < 0) {
-		dev_err(dsi->dev, "cannot enable phy %d\n", ret);
-		goto err_clk;
-	}
-
-	return 0;
-
-err_clk:
-	while (--i > -1)
-		clk_disable_unprepare(dsi->clks[i]);
-	regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
-
-	return ret;
+	component_del(priv->dev, &exynos_dsi_component_ops);
 }
 
-static const struct dev_pm_ops exynos_dsi_pm_ops = {
-	SET_RUNTIME_PM_OPS(exynos_dsi_suspend, exynos_dsi_resume, NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				pm_runtime_force_resume)
-};
-
-struct platform_driver dsi_driver = {
-	.probe = exynos_dsi_probe,
-	.remove = exynos_dsi_remove,
-	.driver = {
-		   .name = "exynos-dsi",
-		   .owner = THIS_MODULE,
-		   .pm = &exynos_dsi_pm_ops,
-		   .of_match_table = exynos_dsi_of_match,
-	},
-};
-
 MODULE_AUTHOR("Tomasz Figa <t.figa@samsung.com>");
 MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
 MODULE_DESCRIPTION("Samsung SoC MIPI DSI Master");
diff --git a/include/drm/bridge/samsung-dsim.h b/include/drm/bridge/samsung-dsim.h
new file mode 100644
index 000000000000..2e245bffd1b6
--- /dev/null
+++ b/include/drm/bridge/samsung-dsim.h
@@ -0,0 +1,99 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2022 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#ifndef __SAMSUNG_DSIM__
+#define __SAMSUNG_DSIM__
+
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_mipi_dsi.h>
+
+struct samsung_dsim;
+
+#define DSIM_STATE_ENABLED		BIT(0)
+#define DSIM_STATE_INITIALIZED		BIT(1)
+#define DSIM_STATE_CMD_LPM		BIT(2)
+#define DSIM_STATE_VIDOUT_AVAILABLE	BIT(3)
+
+struct samsung_dsim_transfer {
+	struct list_head list;
+	struct completion completed;
+	int result;
+	struct mipi_dsi_packet packet;
+	u16 flags;
+	u16 tx_done;
+
+	u8 *rx_payload;
+	u16 rx_len;
+	u16 rx_done;
+};
+
+struct samsung_dsim_driver_data {
+	const unsigned int *reg_ofs;
+	unsigned int plltmr_reg;
+	unsigned int has_freqband:1;
+	unsigned int has_clklane_stop:1;
+	unsigned int num_clks;
+	unsigned int max_freq;
+	unsigned int wait_for_reset;
+	unsigned int num_bits_resol;
+	const unsigned int *reg_values;
+};
+
+struct samsung_dsim_host_ops {
+	int (*attach)(struct samsung_dsim *priv, struct mipi_dsi_device *device);
+	int (*detach)(struct samsung_dsim *priv, struct mipi_dsi_device *device);
+};
+
+struct samsung_dsim_irq_ops {
+	void (*enable)(struct samsung_dsim *priv);
+	void (*disable)(struct samsung_dsim *priv);
+};
+
+struct samsung_dsim_plat_data {
+	const struct samsung_dsim_host_ops *host_ops;
+	const struct samsung_dsim_irq_ops *irq_ops;
+
+	void *priv;
+};
+
+struct samsung_dsim {
+	struct mipi_dsi_host dsi_host;
+	struct drm_bridge bridge;
+	struct drm_bridge *out_bridge;
+	struct device *dev;
+	struct drm_display_mode mode;
+
+	void __iomem *reg_base;
+	struct phy *phy;
+	struct clk **clks;
+	struct regulator_bulk_data supplies[2];
+	int irq;
+
+	u32 pll_clk_rate;
+	u32 burst_clk_rate;
+	u32 esc_clk_rate;
+	u32 lanes;
+	u32 mode_flags;
+	u32 format;
+
+	int state;
+	struct drm_property *brightness;
+	struct completion completed;
+
+	spinlock_t transfer_lock; /* protects transfer_list */
+	struct list_head transfer_list;
+
+	const struct samsung_dsim_driver_data *driver_data;
+	const struct samsung_dsim_plat_data *plat_data;
+};
+
+int samsung_dsim_plat_probe(struct samsung_dsim *priv);
+void samsung_dsim_plat_remove(struct samsung_dsim *priv);
+
+#endif /* __SAMSUNG_DSIM__ */