Message ID | 20221002064540.2500257-3-michael@amarulasolutions.com |
---|---|
State | New |
Headers | show |
Series |
|
Related | show |
On 02-10-22, 08:45, Michael Trimarchi wrote: > The function is used to avoid to enable clock on the hardware > if the mode requested is invalid > > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> > --- > .../phy/rockchip/phy-rockchip-inno-dsidphy.c | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c > index 630e01b5c19b..644cf73cfd53 100644 > --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c > +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c > @@ -217,6 +217,20 @@ static void phy_update_bits(struct inno_dsidphy *inno, > writel(tmp, inno->phy_base + reg); > } > > +static int inno_is_valid_phy_mode(struct inno_dsidphy *inno) > +{ > + switch (inno->mode) { > + case PHY_MODE_MIPI_DPHY: > + break; > + case PHY_MODE_LVDS: > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +}; > + > static unsigned long inno_dsidphy_pll_calc_rate(struct inno_dsidphy *inno, > unsigned long rate) > { > @@ -495,6 +509,11 @@ static void inno_dsidphy_lvds_mode_enable(struct inno_dsidphy *inno) > static int inno_dsidphy_power_on(struct phy *phy) > { > struct inno_dsidphy *inno = phy_get_drvdata(phy); > + int ret = 0; this initialization is superfluous > + > + ret = inno_is_valid_phy_mode(inno); > + if (ret) > + return ret; > > clk_prepare_enable(inno->pclk_phy); > clk_prepare_enable(inno->ref_clk); > -- > 2.34.1
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c index 630e01b5c19b..644cf73cfd53 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c @@ -217,6 +217,20 @@ static void phy_update_bits(struct inno_dsidphy *inno, writel(tmp, inno->phy_base + reg); } +static int inno_is_valid_phy_mode(struct inno_dsidphy *inno) +{ + switch (inno->mode) { + case PHY_MODE_MIPI_DPHY: + break; + case PHY_MODE_LVDS: + break; + default: + return -EINVAL; + } + + return 0; +}; + static unsigned long inno_dsidphy_pll_calc_rate(struct inno_dsidphy *inno, unsigned long rate) { @@ -495,6 +509,11 @@ static void inno_dsidphy_lvds_mode_enable(struct inno_dsidphy *inno) static int inno_dsidphy_power_on(struct phy *phy) { struct inno_dsidphy *inno = phy_get_drvdata(phy); + int ret = 0; + + ret = inno_is_valid_phy_mode(inno); + if (ret) + return ret; clk_prepare_enable(inno->pclk_phy); clk_prepare_enable(inno->ref_clk);
The function is used to avoid to enable clock on the hardware if the mode requested is invalid Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> --- .../phy/rockchip/phy-rockchip-inno-dsidphy.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)