| Message ID | 20230223163553.647775-4-abbaraju.manojsai@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On Thu, Feb 23, 2023 at 10:06 PM Manoj Sai <abbaraju.manojsai@amarulasolutions.com> wrote: > > Enable USB OTG support and update the fastboot buffer address > for Radxa Compute Module 3 IO Board. > > This would help to use fastboot by default. > > Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> > --- > configs/radxa-cm3-io-rk3566_defconfig | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig > index 2100cf2cb2..4d2acef6cd 100644 > --- a/configs/radxa-cm3-io-rk3566_defconfig > +++ b/configs/radxa-cm3-io-rk3566_defconfig > @@ -21,6 +21,7 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 > CONFIG_DEBUG_UART_CLOCK=24000000 > CONFIG_SYS_LOAD_ADDR=0xc00800 > CONFIG_DEBUG_UART=y > +# CONFIG_ANDROID_BOOT_IMAGE is not set > CONFIG_FIT=y > CONFIG_FIT_VERBOSE=y > CONFIG_SPL_LOAD_FIT=y > @@ -47,6 +48,7 @@ CONFIG_NET_RANDOM_ETHADDR=y > CONFIG_SPL_REGMAP=y > CONFIG_SPL_SYSCON=y > CONFIG_SPL_CLK=y > +CONFIG_FASTBOOT_BUF_ADDR=0xc00800 was this address used in bsp or used load addr? add it in drivers/fastboot/Kconfig Jagan.
diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig index 2100cf2cb2..4d2acef6cd 100644 --- a/configs/radxa-cm3-io-rk3566_defconfig +++ b/configs/radxa-cm3-io-rk3566_defconfig @@ -21,6 +21,7 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y +# CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y @@ -47,6 +48,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_BUF_ADDR=0xc00800 CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y @@ -74,4 +76,5 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y CONFIG_ERRNO_STR=y
Enable USB OTG support and update the fastboot buffer address for Radxa Compute Module 3 IO Board. This would help to use fastboot by default. Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> --- configs/radxa-cm3-io-rk3566_defconfig | 3 +++ 1 file changed, 3 insertions(+)