| Message ID | 20230226132234.31949-3-abbaraju.manojsai@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On 2023/2/26 21:22, Manoj Sai wrote: > Enable USB OTG support and update the fastboot buffer address > for Radxa Compute Module 3 IO Board. > > This would help to use fastboot by default. > > Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> > --- > Changes for v2 :- > - Updated the fastboot buffer address in drivers/fastboot/Kconfig. > --- > configs/radxa-cm3-io-rk3566_defconfig | 2 ++ > drivers/fastboot/Kconfig | 1 + > 2 files changed, 3 insertions(+) > > diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig > index 2100cf2cb2..aba3a65e7f 100644 > --- a/configs/radxa-cm3-io-rk3566_defconfig > +++ b/configs/radxa-cm3-io-rk3566_defconfig > @@ -21,6 +21,7 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 > CONFIG_DEBUG_UART_CLOCK=24000000 > CONFIG_SYS_LOAD_ADDR=0xc00800 > CONFIG_DEBUG_UART=y > +# CONFIG_ANDROID_BOOT_IMAGE is not set > CONFIG_FIT=y > CONFIG_FIT_VERBOSE=y > CONFIG_SPL_LOAD_FIT=y > @@ -74,4 +75,5 @@ CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_GENERIC=y > CONFIG_USB_DWC3=y > CONFIG_USB_DWC3_GENERIC=y > +CONFIG_USB_GADGET=y > CONFIG_ERRNO_STR=y > diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig > index eefa34779c..53f0b3a659 100644 > --- a/drivers/fastboot/Kconfig > +++ b/drivers/fastboot/Kconfig > @@ -41,6 +41,7 @@ config FASTBOOT_BUF_ADDR > default 0x800800 if ROCKCHIP_RK3288 || ROCKCHIP_RK3329 || \ > ROCKCHIP_RK3399 > default 0x280000 if ROCKCHIP_RK3368 > + default 0xc00800 if ROCKCHIP_RK3568 Why you need a new address for rk3568? Thanks, - Kever > default 0x100000 if ARCH_ZYNQMP > default 0 if SANDBOX > help
diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig index 2100cf2cb2..aba3a65e7f 100644 --- a/configs/radxa-cm3-io-rk3566_defconfig +++ b/configs/radxa-cm3-io-rk3566_defconfig @@ -21,6 +21,7 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y +# CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y @@ -74,4 +75,5 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y CONFIG_ERRNO_STR=y diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig index eefa34779c..53f0b3a659 100644 --- a/drivers/fastboot/Kconfig +++ b/drivers/fastboot/Kconfig @@ -41,6 +41,7 @@ config FASTBOOT_BUF_ADDR default 0x800800 if ROCKCHIP_RK3288 || ROCKCHIP_RK3329 || \ ROCKCHIP_RK3399 default 0x280000 if ROCKCHIP_RK3368 + default 0xc00800 if ROCKCHIP_RK3568 default 0x100000 if ARCH_ZYNQMP default 0 if SANDBOX help
Enable USB OTG support and update the fastboot buffer address for Radxa Compute Module 3 IO Board. This would help to use fastboot by default. Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> --- Changes for v2 :- - Updated the fastboot buffer address in drivers/fastboot/Kconfig. --- configs/radxa-cm3-io-rk3566_defconfig | 2 ++ drivers/fastboot/Kconfig | 1 + 2 files changed, 3 insertions(+)