| Message ID | 20181210115246.8188-4-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On Mon, Dec 10, 2018 at 05:22:43PM +0530, Jagan Teki wrote: > The default CSI_SCLK seems unable to drive the sensor to capture > the image, so update it to working clock rate 300MHz for A64. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > index bbe45e893722..4b872800b244 100644 > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > @@ -822,6 +822,11 @@ static int sun6i_csi_resource_request(struct sun6i_csi_dev *sdev, > return PTR_ERR(sdev->clk_mod); > } > > + /* A64 need 300MHz mod clock to operate properly */ > + if (of_device_is_compatible(pdev->dev.of_node, > + "allwinner,sun50i-a64-csi")) > + clk_set_rate_exclusive(sdev->clk_mod, 300000000); > + Where is that 300MHz coming from? You claim in your comment that it "operates properly", yet in your previous mail about this, you were saying that 1080p @30Hz is broken. Which one is it? Maxime
On Tue, Dec 11, 2018 at 9:14 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Mon, Dec 10, 2018 at 05:22:43PM +0530, Jagan Teki wrote: > > The default CSI_SCLK seems unable to drive the sensor to capture > > the image, so update it to working clock rate 300MHz for A64. > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > index bbe45e893722..4b872800b244 100644 > > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > > @@ -822,6 +822,11 @@ static int sun6i_csi_resource_request(struct sun6i_csi_dev *sdev, > > return PTR_ERR(sdev->clk_mod); > > } > > > > + /* A64 need 300MHz mod clock to operate properly */ > > + if (of_device_is_compatible(pdev->dev.of_node, > > + "allwinner,sun50i-a64-csi")) > > + clk_set_rate_exclusive(sdev->clk_mod, 300000000); > > + > > Where is that 300MHz coming from? You claim in your comment that it from BSP, even "Chen-Yu Tsai" mentioned the same. (Chen-Yu, can you comment here) > "operates properly", yet in your previous mail about this, you were > saying that 1080p @30Hz is broken. Which one is it? 1080p is broken from sensor end, ie what I mentioned on the respective mail.
diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c index bbe45e893722..4b872800b244 100644 --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c @@ -822,6 +822,11 @@ static int sun6i_csi_resource_request(struct sun6i_csi_dev *sdev, return PTR_ERR(sdev->clk_mod); } + /* A64 need 300MHz mod clock to operate properly */ + if (of_device_is_compatible(pdev->dev.of_node, + "allwinner,sun50i-a64-csi")) + clk_set_rate_exclusive(sdev->clk_mod, 300000000); + sdev->clk_ram = devm_clk_get(&pdev->dev, "ram"); if (IS_ERR(sdev->clk_ram)) { dev_err(&pdev->dev, "Unable to acquire dram-csi clock\n");
The default CSI_SCLK seems unable to drive the sensor to capture the image, so update it to working clock rate 300MHz for A64. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 5 +++++ 1 file changed, 5 insertions(+)