| Message ID | 20190716115745.12585-27-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On 2019/7/16 下午7:57, Jagan Teki wrote: > PHY_898, PHY_919 would require to configure PHY LP4 boot > pll control and ca for lpddr4. > > So, configure the same in pctl_cfg for LPDDR4. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> Thanks, - Kever > --- > drivers/ram/rockchip/sdram_rk3399.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c > index beb4f6de54..7625506458 100644 > --- a/drivers/ram/rockchip/sdram_rk3399.c > +++ b/drivers/ram/rockchip/sdram_rk3399.c > @@ -574,6 +574,11 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan, > writel(params->phy_regs.denali_phy[911], &denali_phy[911]); > writel(params->phy_regs.denali_phy[912], &denali_phy[912]); > > + if (IS_ENABLED(CONFIG_RAM_RK3399_LPDDR4)) { > + writel(params->phy_regs.denali_phy[898], &denali_phy[898]); > + writel(params->phy_regs.denali_phy[919], &denali_phy[919]); > + } > + > dram->pwrup_srefresh_exit[channel] = readl(&denali_ctl[68]) & > PWRUP_SREFRESH_EXIT; > clrbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT);
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index beb4f6de54..7625506458 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -574,6 +574,11 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan, writel(params->phy_regs.denali_phy[911], &denali_phy[911]); writel(params->phy_regs.denali_phy[912], &denali_phy[912]); + if (IS_ENABLED(CONFIG_RAM_RK3399_LPDDR4)) { + writel(params->phy_regs.denali_phy[898], &denali_phy[898]); + writel(params->phy_regs.denali_phy[919], &denali_phy[919]); + } + dram->pwrup_srefresh_exit[channel] = readl(&denali_ctl[68]) & PWRUP_SREFRESH_EXIT; clrbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT);