| Message ID | 20190716115745.12585-30-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On 2019/7/16 下午7:57, Jagan Teki wrote: > Configure PHY RX_CM_INPUT for lpddr4 during phy IO config. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com> Thanks, - Kever > --- > drivers/ram/rockchip/sdram_rk3399.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c > index c02f936f2a..2ab10da53f 100644 > --- a/drivers/ram/rockchip/sdram_rk3399.c > +++ b/drivers/ram/rockchip/sdram_rk3399.c > @@ -39,6 +39,7 @@ > #define PHY_BOOSTN_EN 0x1 > #define PHY_SLEWP_EN 0x1 > #define PHY_SLEWN_EN 0x1 > +#define PHY_RX_CM_INPUT 0x1 > > #define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \ > ((n) << (8 + (ch) * 4))) > @@ -384,6 +385,27 @@ static int phy_io_config(const struct chan_info *chan, > /* PHY_939 PHY_PAD_CS_DRIVE */ > clrsetbits_le32(&denali_phy[939], 0x3 << 17, speed << 17); > > + if (IS_ENABLED(CONFIG_RAM_RK3399_LPDDR4)) { > + /* RX_CM_INPUT */ > + reg_value = PHY_RX_CM_INPUT; > + /* PHY_924 PHY_PAD_FDBK_DRIVE */ > + clrsetbits_le32(&denali_phy[924], 0x1 << 14, reg_value << 14); > + /* PHY_926 PHY_PAD_DATA_DRIVE */ > + clrsetbits_le32(&denali_phy[926], 0x1 << 11, reg_value << 11); > + /* PHY_927 PHY_PAD_DQS_DRIVE */ > + clrsetbits_le32(&denali_phy[927], 0x1 << 13, reg_value << 13); > + /* PHY_928 PHY_PAD_ADDR_DRIVE */ > + clrsetbits_le32(&denali_phy[928], 0x1 << 19, reg_value << 19); > + /* PHY_929 PHY_PAD_CLK_DRIVE */ > + clrsetbits_le32(&denali_phy[929], 0x1 << 21, reg_value << 21); > + /* PHY_935 PHY_PAD_CKE_DRIVE */ > + clrsetbits_le32(&denali_phy[935], 0x1 << 19, reg_value << 19); > + /* PHY_937 PHY_PAD_RST_DRIVE */ > + clrsetbits_le32(&denali_phy[937], 0x1 << 19, reg_value << 19); > + /* PHY_939 PHY_PAD_CS_DRIVE */ > + clrsetbits_le32(&denali_phy[939], 0x1 << 19, reg_value << 19); > + } > + > return 0; > } >
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index c02f936f2a..2ab10da53f 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -39,6 +39,7 @@ #define PHY_BOOSTN_EN 0x1 #define PHY_SLEWP_EN 0x1 #define PHY_SLEWN_EN 0x1 +#define PHY_RX_CM_INPUT 0x1 #define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \ ((n) << (8 + (ch) * 4))) @@ -384,6 +385,27 @@ static int phy_io_config(const struct chan_info *chan, /* PHY_939 PHY_PAD_CS_DRIVE */ clrsetbits_le32(&denali_phy[939], 0x3 << 17, speed << 17); + if (IS_ENABLED(CONFIG_RAM_RK3399_LPDDR4)) { + /* RX_CM_INPUT */ + reg_value = PHY_RX_CM_INPUT; + /* PHY_924 PHY_PAD_FDBK_DRIVE */ + clrsetbits_le32(&denali_phy[924], 0x1 << 14, reg_value << 14); + /* PHY_926 PHY_PAD_DATA_DRIVE */ + clrsetbits_le32(&denali_phy[926], 0x1 << 11, reg_value << 11); + /* PHY_927 PHY_PAD_DQS_DRIVE */ + clrsetbits_le32(&denali_phy[927], 0x1 << 13, reg_value << 13); + /* PHY_928 PHY_PAD_ADDR_DRIVE */ + clrsetbits_le32(&denali_phy[928], 0x1 << 19, reg_value << 19); + /* PHY_929 PHY_PAD_CLK_DRIVE */ + clrsetbits_le32(&denali_phy[929], 0x1 << 21, reg_value << 21); + /* PHY_935 PHY_PAD_CKE_DRIVE */ + clrsetbits_le32(&denali_phy[935], 0x1 << 19, reg_value << 19); + /* PHY_937 PHY_PAD_RST_DRIVE */ + clrsetbits_le32(&denali_phy[937], 0x1 << 19, reg_value << 19); + /* PHY_939 PHY_PAD_CS_DRIVE */ + clrsetbits_le32(&denali_phy[939], 0x1 << 19, reg_value << 19); + } + return 0; }