| Message ID | 20181214204101.9681-2-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On Sat, Dec 15, 2018 at 02:11:01AM +0530, Jagan Teki wrote: > Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. > > Add panel driver for it. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v2: > - use simple structure for command init > - update proper comments on power, reset delay sequnce > - fix to use set_display_off in disable function > - move mode type to structure > - drop refres rate value, let drm compute > > MAINTAINERS | 6 + > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > .../drm/panel/panel-feiyang-fy07024di26a30d.c | 296 ++++++++++++++++++ > 4 files changed, 312 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index d2928a4d2847..e643238855ea 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -4732,6 +4732,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc > S: Maintained > F: drivers/gpu/drm/tve200/ > > +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS > +M: Jagan Teki <jagan@amarulasolutions.com> > +S: Maintained > +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt > + > DRM DRIVER FOR ILITEK ILI9225 PANELS > M: David Lechner <david@lechnology.com> > S: Maintained As I mentioned on IRC, this will be drm-misc maintained with the other panels, no need to have a dedicated MAINTAINERS entry. You'll get pulled from get_maintainers.pl as a majority commit signer > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index d93b2ba709bc..cb8ca93550cf 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -38,6 +38,15 @@ config DRM_PANEL_SIMPLE > that it can be automatically turned off when the panel goes into a > low power state. > > +config DRM_PANEL_FEIYANG_FY07024DI26A30D > + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y if you want to enable support for panels based on the > + Feiyang FY07024DI26A30-D MIPI-DSI interface. > + > config DRM_PANEL_ILITEK_IL9322 > tristate "Ilitek ILI9322 320x240 QVGA panels" > depends on OF && SPI > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 6a9b4cec1891..0fa0ef69e109 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -2,6 +2,7 @@ > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o > obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o > diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > new file mode 100644 > index 000000000000..4abccbf62c3c > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > @@ -0,0 +1,296 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2018 Amarula Solutions > + * Author: Jagan Teki <jagan@amarulasolutions.com> > + */ > + > +#include <linux/backlight.h> > +#include <linux/delay.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > + > +#include <linux/gpio/consumer.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drmP.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_panel.h> > + > +#define FEIYANG_INIT_CMD_LEN 2 > + > +struct feiyang { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi; > + > + struct backlight_device *backlight; > + struct regulator *dvdd; > + struct regulator *avdd; > + struct gpio_desc *reset; > +}; > + > +static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel) > +{ > + return container_of(panel, struct feiyang, panel); > +} > + > +struct feiyang_init_cmd { > + u8 data[FEIYANG_INIT_CMD_LEN]; > +}; > + > +static const struct feiyang_init_cmd feiyang_init_cmds[] = { > + { .data = { 0x80, 0x58 } }, > + { .data = { 0x81, 0x47 } }, > + { .data = { 0x82, 0xD4 } }, > + { .data = { 0x83, 0x88 } }, > + { .data = { 0x84, 0xA9 } }, > + { .data = { 0x85, 0xC3 } }, > + { .data = { 0x86, 0x82 } }, > +}; > + > +static int feiyang_prepare(struct drm_panel *panel) > +{ > + struct feiyang *ctx = panel_to_feiyang(panel); > + struct mipi_dsi_device *dsi = ctx->dsi; > + unsigned int i; > + int ret; > + > + ret = regulator_enable(ctx->dvdd); > + if (ret) > + return ret; > + > + /* T1 (dvdd start + dvdd rise) 0 < T1 <= 10ms */ > + msleep(10); > + > + ret = regulator_enable(ctx->avdd); > + if (ret) > + return ret; > + > + /* T3 (dvdd rise + avdd start + avdd rise) T3 >= 20ms */ > + msleep(20); > + > + gpiod_set_value(ctx->reset, 1); > + msleep(50); > + > + gpiod_set_value(ctx->reset, 0); > + /* T5 + T6 (avdd rise + video & logic signal rise) > + * T5 >= 10ms, 0 < T6 <= 10ms > + */ > + msleep(20); > + > + gpiod_set_value(ctx->reset, 1); > + > + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ > + msleep(200); > + > + for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) { > + const struct feiyang_init_cmd *cmd = > + &feiyang_init_cmds[i]; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, > + FEIYANG_INIT_CMD_LEN); > + if (ret < 0) > + return ret; > + } > + > + return 0; > +} > + > +static int feiyang_enable(struct drm_panel *panel) > +{ > + struct feiyang *ctx = panel_to_feiyang(panel); > + > + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ > + msleep(200); > + > + mipi_dsi_dcs_set_display_on(ctx->dsi); > + backlight_enable(ctx->backlight); > + > + return 0; > +} > + > +static int feiyang_disable(struct drm_panel *panel) > +{ > + struct feiyang *ctx = panel_to_feiyang(panel); > + > + backlight_disable(ctx->backlight); > + return mipi_dsi_dcs_set_display_off(ctx->dsi); > +} > + > +static int feiyang_unprepare(struct drm_panel *panel) > +{ > + struct feiyang *ctx = panel_to_feiyang(panel); > + int ret; > + > + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); > + if (ret < 0) > + DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n", > + ret); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); > + if (ret < 0) > + DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n", > + ret); > + > + /* T13 (backlight fall + video & logic signal fall) T13 >= 200ms */ > + msleep(200); > + > + gpiod_set_value(ctx->reset, 0); > + > + gpiod_set_value(ctx->reset, 1); > + > + gpiod_set_value(ctx->reset, 0); > + > + regulator_disable(ctx->avdd); > + > + /* T11 (dvdd rise to fall) 0 < T11 <= 10ms */ > + msleep(10); > + > + regulator_disable(ctx->dvdd); > + > + return 0; > +} > + > +static const struct drm_display_mode feiyang_default_mode = { > + .clock = 55000, > + > + .hdisplay = 1024, > + .hsync_start = 1024 + 396, > + .hsync_end = 1024 + 396 + 20, > + .htotal = 1024 + 396 + 20 + 100, > + > + .vdisplay = 600, > + .vsync_start = 600 + 12, > + .vsync_end = 600 + 12 + 2, > + .vtotal = 600 + 12 + 2 + 21, These timings are still incorrect, they'll give a 56.2Hz refresh rate. Is that really what you want? > + > + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, > +}; > + > +static int feiyang_get_modes(struct drm_panel *panel) > +{ > + struct drm_connector *connector = panel->connector; > + struct feiyang *ctx = panel_to_feiyang(panel); > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(panel->drm, &feiyang_default_mode); > + if (!mode) { > + DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", > + feiyang_default_mode.hdisplay, > + feiyang_default_mode.vdisplay, > + feiyang_default_mode.vrefresh); > + return -ENOMEM; > + } > + > + drm_mode_set_name(mode); > + > + drm_mode_probed_add(connector, mode); > + > + return 1; > +} > + > +static const struct drm_panel_funcs feiyang_funcs = { > + .disable = feiyang_disable, > + .unprepare = feiyang_unprepare, > + .prepare = feiyang_prepare, > + .enable = feiyang_enable, > + .get_modes = feiyang_get_modes, > +}; > + > +static int feiyang_dsi_probe(struct mipi_dsi_device *dsi) > +{ > + struct device_node *np; > + struct feiyang *ctx; > + int ret; > + > + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + mipi_dsi_set_drvdata(dsi, ctx); > + ctx->dsi = dsi; > + > + drm_panel_init(&ctx->panel); > + ctx->panel.dev = &dsi->dev; > + ctx->panel.funcs = &feiyang_funcs; > + > + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); > + if (IS_ERR(ctx->dvdd)) { > + DRM_DEV_ERROR(&dsi->dev, "Couldn't get dvdd regulator\n"); > + return PTR_ERR(ctx->dvdd); > + } > + > + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); > + if (IS_ERR(ctx->avdd)) { > + DRM_DEV_ERROR(&dsi->dev, "Couldn't get avdd regulator\n"); > + return PTR_ERR(ctx->avdd); > + } > + > + ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ctx->reset)) { > + DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n"); > + return PTR_ERR(ctx->reset); > + } > + > + np = of_parse_phandle(dsi->dev.of_node, "backlight", 0); > + if (np) { > + ctx->backlight = of_find_backlight_by_node(np); > + of_node_put(np); > + > + if (!ctx->backlight) > + return -EPROBE_DEFER; > + } > + > + ret = drm_panel_add(&ctx->panel); > + if (ret < 0) > + goto put_backlight; > + > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->lanes = 4; > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) > + goto panel_remove; > + > + return ret; > + > +panel_remove: > + drm_panel_remove(&ctx->panel); > +put_backlight: > + if (ctx->backlight) > + put_device(&ctx->backlight->dev); > + > + return ret; > +} > + > +static int feiyang_dsi_remove(struct mipi_dsi_device *dsi) > +{ > + struct feiyang *ctx = mipi_dsi_get_drvdata(dsi); > + > + mipi_dsi_detach(dsi); > + drm_panel_remove(&ctx->panel); > + > + if (ctx->backlight) > + put_device(&ctx->backlight->dev); > + > + return 0; > +} > + > +static const struct of_device_id feiyang_of_match[] = { > + { .compatible = "feiyang,fy07024di26a30d", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, feiyang_of_match); > + > +static struct mipi_dsi_driver feiyang_driver = { > + .probe = feiyang_dsi_probe, > + .remove = feiyang_dsi_remove, > + .driver = { > + .name = "feiyang-fy07024di26a30d", > + .of_match_table = feiyang_of_match, > + }, > +}; > +module_mipi_dsi_driver(feiyang_driver); > + > +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); > +MODULE_DESCRIPTION("Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"); > +MODULE_LICENSE("GPL"); > -- > 2.18.0.321.gffc6fa0e3 >
On Sat, Dec 15, 2018 at 3:32 AM Sean Paul <sean@poorly.run> wrote: > > On Sat, Dec 15, 2018 at 02:11:01AM +0530, Jagan Teki wrote: > > Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. > > > > Add panel driver for it. > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > Changes for v2: > > - use simple structure for command init > > - update proper comments on power, reset delay sequnce > > - fix to use set_display_off in disable function > > - move mode type to structure > > - drop refres rate value, let drm compute > > > > MAINTAINERS | 6 + > > drivers/gpu/drm/panel/Kconfig | 9 + > > drivers/gpu/drm/panel/Makefile | 1 + > > .../drm/panel/panel-feiyang-fy07024di26a30d.c | 296 ++++++++++++++++++ > > 4 files changed, 312 insertions(+) > > create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index d2928a4d2847..e643238855ea 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -4732,6 +4732,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc > > S: Maintained > > F: drivers/gpu/drm/tve200/ > > > > +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS > > +M: Jagan Teki <jagan@amarulasolutions.com> > > +S: Maintained > > +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt > > + > > DRM DRIVER FOR ILITEK ILI9225 PANELS > > M: David Lechner <david@lechnology.com> > > S: Maintained > > As I mentioned on IRC, this will be drm-misc maintained with the other panels, > no need to have a dedicated MAINTAINERS entry. You'll get pulled from > get_maintainers.pl as a majority commit signer This I missed it on IRC, sorry will drop. > > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > > index d93b2ba709bc..cb8ca93550cf 100644 > > --- a/drivers/gpu/drm/panel/Kconfig > > +++ b/drivers/gpu/drm/panel/Kconfig > > @@ -38,6 +38,15 @@ config DRM_PANEL_SIMPLE > > that it can be automatically turned off when the panel goes into a > > low power state. > > > > +config DRM_PANEL_FEIYANG_FY07024DI26A30D > > + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" > > + depends on OF > > + depends on DRM_MIPI_DSI > > + depends on BACKLIGHT_CLASS_DEVICE > > + help > > + Say Y if you want to enable support for panels based on the > > + Feiyang FY07024DI26A30-D MIPI-DSI interface. > > + > > config DRM_PANEL_ILITEK_IL9322 > > tristate "Ilitek ILI9322 320x240 QVGA panels" > > depends on OF && SPI > > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > > index 6a9b4cec1891..0fa0ef69e109 100644 > > --- a/drivers/gpu/drm/panel/Makefile > > +++ b/drivers/gpu/drm/panel/Makefile > > @@ -2,6 +2,7 @@ > > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o > > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > > +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o > > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o > > obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o > > diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > new file mode 100644 > > index 000000000000..4abccbf62c3c > > --- /dev/null > > +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > @@ -0,0 +1,296 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright (C) 2018 Amarula Solutions > > + * Author: Jagan Teki <jagan@amarulasolutions.com> > > + */ > > + > > +#include <linux/backlight.h> > > +#include <linux/delay.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > + > > +#include <linux/gpio/consumer.h> > > +#include <linux/regulator/consumer.h> > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_mipi_dsi.h> > > +#include <drm/drm_panel.h> > > + > > +#define FEIYANG_INIT_CMD_LEN 2 > > + > > +struct feiyang { > > + struct drm_panel panel; > > + struct mipi_dsi_device *dsi; > > + > > + struct backlight_device *backlight; > > + struct regulator *dvdd; > > + struct regulator *avdd; > > + struct gpio_desc *reset; > > +}; > > + > > +static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel) > > +{ > > + return container_of(panel, struct feiyang, panel); > > +} > > + > > +struct feiyang_init_cmd { > > + u8 data[FEIYANG_INIT_CMD_LEN]; > > +}; > > + > > +static const struct feiyang_init_cmd feiyang_init_cmds[] = { > > + { .data = { 0x80, 0x58 } }, > > + { .data = { 0x81, 0x47 } }, > > + { .data = { 0x82, 0xD4 } }, > > + { .data = { 0x83, 0x88 } }, > > + { .data = { 0x84, 0xA9 } }, > > + { .data = { 0x85, 0xC3 } }, > > + { .data = { 0x86, 0x82 } }, > > +}; > > + > > +static int feiyang_prepare(struct drm_panel *panel) > > +{ > > + struct feiyang *ctx = panel_to_feiyang(panel); > > + struct mipi_dsi_device *dsi = ctx->dsi; > > + unsigned int i; > > + int ret; > > + > > + ret = regulator_enable(ctx->dvdd); > > + if (ret) > > + return ret; > > + > > + /* T1 (dvdd start + dvdd rise) 0 < T1 <= 10ms */ > > + msleep(10); > > + > > + ret = regulator_enable(ctx->avdd); > > + if (ret) > > + return ret; > > + > > + /* T3 (dvdd rise + avdd start + avdd rise) T3 >= 20ms */ > > + msleep(20); > > + > > + gpiod_set_value(ctx->reset, 1); > > + msleep(50); > > + > > + gpiod_set_value(ctx->reset, 0); > > + /* T5 + T6 (avdd rise + video & logic signal rise) > > + * T5 >= 10ms, 0 < T6 <= 10ms > > + */ > > + msleep(20); > > + > > + gpiod_set_value(ctx->reset, 1); > > + > > + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ > > + msleep(200); > > + > > + for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) { > > + const struct feiyang_init_cmd *cmd = > > + &feiyang_init_cmds[i]; > > + > > + ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, > > + FEIYANG_INIT_CMD_LEN); > > + if (ret < 0) > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int feiyang_enable(struct drm_panel *panel) > > +{ > > + struct feiyang *ctx = panel_to_feiyang(panel); > > + > > + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ > > + msleep(200); > > + > > + mipi_dsi_dcs_set_display_on(ctx->dsi); > > + backlight_enable(ctx->backlight); > > + > > + return 0; > > +} > > + > > +static int feiyang_disable(struct drm_panel *panel) > > +{ > > + struct feiyang *ctx = panel_to_feiyang(panel); > > + > > + backlight_disable(ctx->backlight); > > + return mipi_dsi_dcs_set_display_off(ctx->dsi); > > +} > > + > > +static int feiyang_unprepare(struct drm_panel *panel) > > +{ > > + struct feiyang *ctx = panel_to_feiyang(panel); > > + int ret; > > + > > + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); > > + if (ret < 0) > > + DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n", > > + ret); > > + > > + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); > > + if (ret < 0) > > + DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n", > > + ret); > > + > > + /* T13 (backlight fall + video & logic signal fall) T13 >= 200ms */ > > + msleep(200); > > + > > + gpiod_set_value(ctx->reset, 0); > > + > > + gpiod_set_value(ctx->reset, 1); > > + > > + gpiod_set_value(ctx->reset, 0); > > + > > + regulator_disable(ctx->avdd); > > + > > + /* T11 (dvdd rise to fall) 0 < T11 <= 10ms */ > > + msleep(10); > > + > > + regulator_disable(ctx->dvdd); > > + > > + return 0; > > +} > > + > > +static const struct drm_display_mode feiyang_default_mode = { > > + .clock = 55000, > > + > > + .hdisplay = 1024, > > + .hsync_start = 1024 + 396, > > + .hsync_end = 1024 + 396 + 20, > > + .htotal = 1024 + 396 + 20 + 100, > > + > > + .vdisplay = 600, > > + .vsync_start = 600 + 12, > > + .vsync_end = 600 + 12 + 2, > > + .vtotal = 600 + 12 + 2 + 21, > > These timings are still incorrect, they'll give a 56.2Hz refresh rate. Is that > really what you want? I would like to go with same rate as of now since BSP is using the same, since I don't have any information from chip vendor(even I wrote it and waiting for response). I will update accordingly once I get the information from vendor. Let me know your inputs.
On Tue, Dec 18, 2018 at 05:06:38PM +0530, Jagan Teki wrote: > On Sat, Dec 15, 2018 at 3:32 AM Sean Paul <sean@poorly.run> wrote: > > > > On Sat, Dec 15, 2018 at 02:11:01AM +0530, Jagan Teki wrote: > > > Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. > > > > > > Add panel driver for it. > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > --- > > > Changes for v2: > > > - use simple structure for command init > > > - update proper comments on power, reset delay sequnce > > > - fix to use set_display_off in disable function > > > - move mode type to structure > > > - drop refres rate value, let drm compute > > > > > > MAINTAINERS | 6 + > > > drivers/gpu/drm/panel/Kconfig | 9 + > > > drivers/gpu/drm/panel/Makefile | 1 + > > > .../drm/panel/panel-feiyang-fy07024di26a30d.c | 296 ++++++++++++++++++ > > > 4 files changed, 312 insertions(+) > > > create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > index d2928a4d2847..e643238855ea 100644 > > > --- a/MAINTAINERS > > > +++ b/MAINTAINERS > > > @@ -4732,6 +4732,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc > > > S: Maintained > > > F: drivers/gpu/drm/tve200/ > > > > > > +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS > > > +M: Jagan Teki <jagan@amarulasolutions.com> > > > +S: Maintained > > > +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt > > > + > > > DRM DRIVER FOR ILITEK ILI9225 PANELS > > > M: David Lechner <david@lechnology.com> > > > S: Maintained > > > > As I mentioned on IRC, this will be drm-misc maintained with the other panels, > > no need to have a dedicated MAINTAINERS entry. You'll get pulled from > > get_maintainers.pl as a majority commit signer > > This I missed it on IRC, sorry will drop. > > > > > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > > > index d93b2ba709bc..cb8ca93550cf 100644 > > > --- a/drivers/gpu/drm/panel/Kconfig > > > +++ b/drivers/gpu/drm/panel/Kconfig > > > @@ -38,6 +38,15 @@ config DRM_PANEL_SIMPLE > > > that it can be automatically turned off when the panel goes into a > > > low power state. > > > > > > +config DRM_PANEL_FEIYANG_FY07024DI26A30D > > > + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" > > > + depends on OF > > > + depends on DRM_MIPI_DSI > > > + depends on BACKLIGHT_CLASS_DEVICE > > > + help > > > + Say Y if you want to enable support for panels based on the > > > + Feiyang FY07024DI26A30-D MIPI-DSI interface. > > > + > > > config DRM_PANEL_ILITEK_IL9322 > > > tristate "Ilitek ILI9322 320x240 QVGA panels" > > > depends on OF && SPI > > > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > > > index 6a9b4cec1891..0fa0ef69e109 100644 > > > --- a/drivers/gpu/drm/panel/Makefile > > > +++ b/drivers/gpu/drm/panel/Makefile > > > @@ -2,6 +2,7 @@ > > > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > > > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o > > > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > > > +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o > > > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > > > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o > > > obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o > > > diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > new file mode 100644 > > > index 000000000000..4abccbf62c3c > > > --- /dev/null > > > +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > @@ -0,0 +1,296 @@ /snip > > > +static const struct drm_display_mode feiyang_default_mode = { > > > + .clock = 55000, > > > + > > > + .hdisplay = 1024, > > > + .hsync_start = 1024 + 396, > > > + .hsync_end = 1024 + 396 + 20, > > > + .htotal = 1024 + 396 + 20 + 100, > > > + > > > + .vdisplay = 600, > > > + .vsync_start = 600 + 12, > > > + .vsync_end = 600 + 12 + 2, > > > + .vtotal = 600 + 12 + 2 + 21, > > > > These timings are still incorrect, they'll give a 56.2Hz refresh rate. Is that > > really what you want? > > I would like to go with same rate as of now since BSP is using the > same, since I don't have any information from chip vendor(even I wrote > it and waiting for response). I will update accordingly once I get the > information from vendor. > > Let me know your inputs. Not totally on board with this, tbh. It seems wrong, so I'm not sure why we'd apply code that seems wrong. We're not in a rush, we've already cut 4.21, so I think we should just wait for vendor confirmation on these values. Sean
On Thu, Dec 20, 2018 at 10:34 PM Sean Paul <sean@poorly.run> wrote: > > On Tue, Dec 18, 2018 at 05:06:38PM +0530, Jagan Teki wrote: > > On Sat, Dec 15, 2018 at 3:32 AM Sean Paul <sean@poorly.run> wrote: > > > > > > On Sat, Dec 15, 2018 at 02:11:01AM +0530, Jagan Teki wrote: > > > > Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. > > > > > > > > Add panel driver for it. > > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > > --- > > > > Changes for v2: > > > > - use simple structure for command init > > > > - update proper comments on power, reset delay sequnce > > > > - fix to use set_display_off in disable function > > > > - move mode type to structure > > > > - drop refres rate value, let drm compute > > > > > > > > MAINTAINERS | 6 + > > > > drivers/gpu/drm/panel/Kconfig | 9 + > > > > drivers/gpu/drm/panel/Makefile | 1 + > > > > .../drm/panel/panel-feiyang-fy07024di26a30d.c | 296 ++++++++++++++++++ > > > > 4 files changed, 312 insertions(+) > > > > create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > > > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > > > index d2928a4d2847..e643238855ea 100644 > > > > --- a/MAINTAINERS > > > > +++ b/MAINTAINERS > > > > @@ -4732,6 +4732,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc > > > > S: Maintained > > > > F: drivers/gpu/drm/tve200/ > > > > > > > > +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS > > > > +M: Jagan Teki <jagan@amarulasolutions.com> > > > > +S: Maintained > > > > +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > > +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt > > > > + > > > > DRM DRIVER FOR ILITEK ILI9225 PANELS > > > > M: David Lechner <david@lechnology.com> > > > > S: Maintained > > > > > > As I mentioned on IRC, this will be drm-misc maintained with the other panels, > > > no need to have a dedicated MAINTAINERS entry. You'll get pulled from > > > get_maintainers.pl as a majority commit signer > > > > This I missed it on IRC, sorry will drop. > > > > > > > > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > > > > index d93b2ba709bc..cb8ca93550cf 100644 > > > > --- a/drivers/gpu/drm/panel/Kconfig > > > > +++ b/drivers/gpu/drm/panel/Kconfig > > > > @@ -38,6 +38,15 @@ config DRM_PANEL_SIMPLE > > > > that it can be automatically turned off when the panel goes into a > > > > low power state. > > > > > > > > +config DRM_PANEL_FEIYANG_FY07024DI26A30D > > > > + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" > > > > + depends on OF > > > > + depends on DRM_MIPI_DSI > > > > + depends on BACKLIGHT_CLASS_DEVICE > > > > + help > > > > + Say Y if you want to enable support for panels based on the > > > > + Feiyang FY07024DI26A30-D MIPI-DSI interface. > > > > + > > > > config DRM_PANEL_ILITEK_IL9322 > > > > tristate "Ilitek ILI9322 320x240 QVGA panels" > > > > depends on OF && SPI > > > > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > > > > index 6a9b4cec1891..0fa0ef69e109 100644 > > > > --- a/drivers/gpu/drm/panel/Makefile > > > > +++ b/drivers/gpu/drm/panel/Makefile > > > > @@ -2,6 +2,7 @@ > > > > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > > > > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o > > > > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > > > > +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o > > > > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > > > > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o > > > > obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o > > > > diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > > new file mode 100644 > > > > index 000000000000..4abccbf62c3c > > > > --- /dev/null > > > > +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c > > > > @@ -0,0 +1,296 @@ > > /snip > > > > > +static const struct drm_display_mode feiyang_default_mode = { > > > > + .clock = 55000, > > > > + > > > > + .hdisplay = 1024, > > > > + .hsync_start = 1024 + 396, > > > > + .hsync_end = 1024 + 396 + 20, > > > > + .htotal = 1024 + 396 + 20 + 100, > > > > + > > > > + .vdisplay = 600, > > > > + .vsync_start = 600 + 12, > > > > + .vsync_end = 600 + 12 + 2, > > > > + .vtotal = 600 + 12 + 2 + 21, > > > > > > These timings are still incorrect, they'll give a 56.2Hz refresh rate. Is that > > > really what you want? > > > > I would like to go with same rate as of now since BSP is using the > > same, since I don't have any information from chip vendor(even I wrote > > it and waiting for response). I will update accordingly once I get the > > information from vendor. > > > > Let me know your inputs. > > Not totally on board with this, tbh. It seems wrong, so I'm not sure why we'd > apply code that seems wrong. We're not in a rush, we've already cut 4.21, so I > think we should just wait for vendor confirmation on these values. No, I'm not asking to apply just to know how it works and more over I can see some panels still use refresh rate 60 but with wrong panel timings. Anyway, I've managed to satisfy the refresh rate 60 with changed porch values. Here are new timings. .clock = 55000, .hdisplay = 1024, .hsync_start = 1024 + 310, .hsync_end = 1024 + 310 + 20, .htotal = 1024 + 310 + 20 + 90, .vdisplay = 600, .vsync_start = 600 + 12, .vsync_end = 600 + 12 + 2, .vtotal = 600 + 12 + 2 + 21 I can see the display as same as before, but not clear is there anyway to update porch values for desired refresh rate computation.
diff --git a/MAINTAINERS b/MAINTAINERS index d2928a4d2847..e643238855ea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4732,6 +4732,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/tve200/ +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS +M: Jagan Teki <jagan@amarulasolutions.com> +S: Maintained +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt + DRM DRIVER FOR ILITEK ILI9225 PANELS M: David Lechner <david@lechnology.com> S: Maintained diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index d93b2ba709bc..cb8ca93550cf 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -38,6 +38,15 @@ config DRM_PANEL_SIMPLE that it can be automatically turned off when the panel goes into a low power state. +config DRM_PANEL_FEIYANG_FY07024DI26A30D + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Feiyang FY07024DI26A30-D MIPI-DSI interface. + config DRM_PANEL_ILITEK_IL9322 tristate "Ilitek ILI9322 320x240 QVGA panels" depends on OF && SPI diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 6a9b4cec1891..0fa0ef69e109 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c new file mode 100644 index 000000000000..4abccbf62c3c --- /dev/null +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of_device.h> + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#include <drm/drmP.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#define FEIYANG_INIT_CMD_LEN 2 + +struct feiyang { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + + struct backlight_device *backlight; + struct regulator *dvdd; + struct regulator *avdd; + struct gpio_desc *reset; +}; + +static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel) +{ + return container_of(panel, struct feiyang, panel); +} + +struct feiyang_init_cmd { + u8 data[FEIYANG_INIT_CMD_LEN]; +}; + +static const struct feiyang_init_cmd feiyang_init_cmds[] = { + { .data = { 0x80, 0x58 } }, + { .data = { 0x81, 0x47 } }, + { .data = { 0x82, 0xD4 } }, + { .data = { 0x83, 0x88 } }, + { .data = { 0x84, 0xA9 } }, + { .data = { 0x85, 0xC3 } }, + { .data = { 0x86, 0x82 } }, +}; + +static int feiyang_prepare(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + struct mipi_dsi_device *dsi = ctx->dsi; + unsigned int i; + int ret; + + ret = regulator_enable(ctx->dvdd); + if (ret) + return ret; + + /* T1 (dvdd start + dvdd rise) 0 < T1 <= 10ms */ + msleep(10); + + ret = regulator_enable(ctx->avdd); + if (ret) + return ret; + + /* T3 (dvdd rise + avdd start + avdd rise) T3 >= 20ms */ + msleep(20); + + gpiod_set_value(ctx->reset, 1); + msleep(50); + + gpiod_set_value(ctx->reset, 0); + /* T5 + T6 (avdd rise + video & logic signal rise) + * T5 >= 10ms, 0 < T6 <= 10ms + */ + msleep(20); + + gpiod_set_value(ctx->reset, 1); + + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ + msleep(200); + + for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) { + const struct feiyang_init_cmd *cmd = + &feiyang_init_cmds[i]; + + ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data, + FEIYANG_INIT_CMD_LEN); + if (ret < 0) + return ret; + } + + return 0; +} + +static int feiyang_enable(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + + /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */ + msleep(200); + + mipi_dsi_dcs_set_display_on(ctx->dsi); + backlight_enable(ctx->backlight); + + return 0; +} + +static int feiyang_disable(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + + backlight_disable(ctx->backlight); + return mipi_dsi_dcs_set_display_off(ctx->dsi); +} + +static int feiyang_unprepare(struct drm_panel *panel) +{ + struct feiyang *ctx = panel_to_feiyang(panel); + int ret; + + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); + if (ret < 0) + DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n", + ret); + + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); + if (ret < 0) + DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n", + ret); + + /* T13 (backlight fall + video & logic signal fall) T13 >= 200ms */ + msleep(200); + + gpiod_set_value(ctx->reset, 0); + + gpiod_set_value(ctx->reset, 1); + + gpiod_set_value(ctx->reset, 0); + + regulator_disable(ctx->avdd); + + /* T11 (dvdd rise to fall) 0 < T11 <= 10ms */ + msleep(10); + + regulator_disable(ctx->dvdd); + + return 0; +} + +static const struct drm_display_mode feiyang_default_mode = { + .clock = 55000, + + .hdisplay = 1024, + .hsync_start = 1024 + 396, + .hsync_end = 1024 + 396 + 20, + .htotal = 1024 + 396 + 20 + 100, + + .vdisplay = 600, + .vsync_start = 600 + 12, + .vsync_end = 600 + 12 + 2, + .vtotal = 600 + 12 + 2 + 21, + + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static int feiyang_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct feiyang *ctx = panel_to_feiyang(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &feiyang_default_mode); + if (!mode) { + DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", + feiyang_default_mode.hdisplay, + feiyang_default_mode.vdisplay, + feiyang_default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs feiyang_funcs = { + .disable = feiyang_disable, + .unprepare = feiyang_unprepare, + .prepare = feiyang_prepare, + .enable = feiyang_enable, + .get_modes = feiyang_get_modes, +}; + +static int feiyang_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct device_node *np; + struct feiyang *ctx; + int ret; + + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dsi = dsi; + + drm_panel_init(&ctx->panel); + ctx->panel.dev = &dsi->dev; + ctx->panel.funcs = &feiyang_funcs; + + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); + if (IS_ERR(ctx->dvdd)) { + DRM_DEV_ERROR(&dsi->dev, "Couldn't get dvdd regulator\n"); + return PTR_ERR(ctx->dvdd); + } + + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); + if (IS_ERR(ctx->avdd)) { + DRM_DEV_ERROR(&dsi->dev, "Couldn't get avdd regulator\n"); + return PTR_ERR(ctx->avdd); + } + + ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset)) { + DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n"); + return PTR_ERR(ctx->reset); + } + + np = of_parse_phandle(dsi->dev.of_node, "backlight", 0); + if (np) { + ctx->backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!ctx->backlight) + return -EPROBE_DEFER; + } + + ret = drm_panel_add(&ctx->panel); + if (ret < 0) + goto put_backlight; + + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->lanes = 4; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) + goto panel_remove; + + return ret; + +panel_remove: + drm_panel_remove(&ctx->panel); +put_backlight: + if (ctx->backlight) + put_device(&ctx->backlight->dev); + + return ret; +} + +static int feiyang_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct feiyang *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); + + if (ctx->backlight) + put_device(&ctx->backlight->dev); + + return 0; +} + +static const struct of_device_id feiyang_of_match[] = { + { .compatible = "feiyang,fy07024di26a30d", }, + { } +}; +MODULE_DEVICE_TABLE(of, feiyang_of_match); + +static struct mipi_dsi_driver feiyang_driver = { + .probe = feiyang_dsi_probe, + .remove = feiyang_dsi_remove, + .driver = { + .name = "feiyang-fy07024di26a30d", + .of_match_table = feiyang_of_match, + }, +}; +module_mipi_dsi_driver(feiyang_driver); + +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); +MODULE_DESCRIPTION("Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"); +MODULE_LICENSE("GPL");
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. Add panel driver for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - use simple structure for command init - update proper comments on power, reset delay sequnce - fix to use set_display_off in disable function - move mode type to structure - drop refres rate value, let drm compute MAINTAINERS | 6 + drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../drm/panel/panel-feiyang-fy07024di26a30d.c | 296 ++++++++++++++++++ 4 files changed, 312 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c