[v2,1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi

Message ID 20200428100019.19155-2-jagan@amarulasolutions.com
State New
Headers show
Series
  • rk3399: Sync linux v5.7-rc1 dts(i)
Related show

Commit Message

Jagan Teki April 28, 2020, 10 a.m. UTC
Move U-Boot specific properties into rk3399-puma u-boot
specific dtsi file.

This would help to sync the devicetrees from Linux whenever
required instead of adding specific nodes.

Cc: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++
 arch/arm/dts/rk3399-puma.dtsi        | 11 -----------
 2 files changed, 16 insertions(+), 11 deletions(-)

Comments

Kever Yang April 28, 2020, 2:12 p.m. UTC | #1
On 2020/4/28 下午6:00, Jagan Teki wrote:
> Move U-Boot specific properties into rk3399-puma u-boot
> specific dtsi file.
>
> This would help to sync the devicetrees from Linux whenever
> required instead of adding specific nodes.
>
> Cc: Peter Robinson <pbrobinson@gmail.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>


Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
> Changes for v2:
> - none
>
>   arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++
>   arch/arm/dts/rk3399-puma.dtsi        | 11 -----------
>   2 files changed, 16 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi
> index 52f62b5d39..e664779227 100644
> --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
> +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi
> @@ -22,3 +22,19 @@
>          };
>   
>   };
> +
> +&bios_enable {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&gpio1 {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&gpio3 {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&spiflash {
> +	u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
> index 558b6337df..246a892cb7 100644
> --- a/arch/arm/dts/rk3399-puma.dtsi
> +++ b/arch/arm/dts/rk3399-puma.dtsi
> @@ -91,7 +91,6 @@
>   	 */
>   	bios_enable: bios_enable {
>   		compatible = "regulator-fixed";
> -		u-boot,dm-pre-reloc;
>   		regulator-name = "bios_enable";
>   		enable-active-high;
>   		gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
> @@ -520,14 +519,6 @@
>   	status = "okay";
>   };
>   
> -&gpio1 {
> -	u-boot,dm-pre-reloc;
> -};
> -
> -&gpio3 {
> -	u-boot,dm-pre-reloc;
> -};
> -
>   &pinctrl {
>   	/* Pins that are not explicitely used by any devices */
>   	pinctrl-names = "default";
> @@ -633,8 +624,6 @@
>   	#size-cells = <0>;
>   
>   	spiflash: w25q32dw@0 {
> -		u-boot,dm-pre-reloc;
> -
>   		compatible = "jedec,spi-nor";
>   		reg = <0>;
>   		spi-max-frequency = <49500000>;
Kever Yang April 28, 2020, 2:12 p.m. UTC | #2
On 2020/4/28 下午6:00, Jagan Teki wrote:
> Move U-Boot specific properties into rk3399-puma u-boot
> specific dtsi file.
>
> This would help to sync the devicetrees from Linux whenever
> required instead of adding specific nodes.
>
> Cc: Peter Robinson <pbrobinson@gmail.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>


Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
> Changes for v2:
> - none
>
>   arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++
>   arch/arm/dts/rk3399-puma.dtsi        | 11 -----------
>   2 files changed, 16 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi
> index 52f62b5d39..e664779227 100644
> --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
> +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi
> @@ -22,3 +22,19 @@
>          };
>   
>   };
> +
> +&bios_enable {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&gpio1 {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&gpio3 {
> +	u-boot,dm-pre-reloc;
> +};
> +
> +&spiflash {
> +	u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
> index 558b6337df..246a892cb7 100644
> --- a/arch/arm/dts/rk3399-puma.dtsi
> +++ b/arch/arm/dts/rk3399-puma.dtsi
> @@ -91,7 +91,6 @@
>   	 */
>   	bios_enable: bios_enable {
>   		compatible = "regulator-fixed";
> -		u-boot,dm-pre-reloc;
>   		regulator-name = "bios_enable";
>   		enable-active-high;
>   		gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
> @@ -520,14 +519,6 @@
>   	status = "okay";
>   };
>   
> -&gpio1 {
> -	u-boot,dm-pre-reloc;
> -};
> -
> -&gpio3 {
> -	u-boot,dm-pre-reloc;
> -};
> -
>   &pinctrl {
>   	/* Pins that are not explicitely used by any devices */
>   	pinctrl-names = "default";
> @@ -633,8 +624,6 @@
>   	#size-cells = <0>;
>   
>   	spiflash: w25q32dw@0 {
> -		u-boot,dm-pre-reloc;
> -
>   		compatible = "jedec,spi-nor";
>   		reg = <0>;
>   		spi-max-frequency = <49500000>;

Patch

diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi
index 52f62b5d39..e664779227 100644
--- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi
@@ -22,3 +22,19 @@ 
        };
 
 };
+
+&bios_enable {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&spiflash {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 558b6337df..246a892cb7 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -91,7 +91,6 @@ 
 	 */
 	bios_enable: bios_enable {
 		compatible = "regulator-fixed";
-		u-boot,dm-pre-reloc;
 		regulator-name = "bios_enable";
 		enable-active-high;
 		gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
@@ -520,14 +519,6 @@ 
 	status = "okay";
 };
 
-&gpio1 {
-	u-boot,dm-pre-reloc;
-};
-
-&gpio3 {
-	u-boot,dm-pre-reloc;
-};
-
 &pinctrl {
 	/* Pins that are not explicitely used by any devices */
 	pinctrl-names = "default";
@@ -633,8 +624,6 @@ 
 	#size-cells = <0>;
 
 	spiflash: w25q32dw@0 {
-		u-boot,dm-pre-reloc;
-
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <49500000>;