[00/11] Update imx8mn-bsh-smm boards
mbox series

Message ID 20250512135005.1419006-1-michael@amarulasolutions.com
Headers show
Series
  • Update imx8mn-bsh-smm boards
Related show

Message

Michael Nazzareno Trimarchi May 12, 2025, 1:49 p.m. UTC
Small series to align the s2 and s2pro boards from BSH to downstream kernel
used in production. This allow us to move to mainline in the
upcoming months

Karthikdatt Anantharamrao (1):
  arm64: dts: imx8mn-bsh-smm-s2-common: Enable GPU for smms2 and
    smms2pro

Michael Trimarchi (4):
  arm64: dts: imx8mn-bsh-smm-s2-common: Define suspend voltage threshold
  arm64: dts: imx8mn-bsh-smm-s2-common: Leave regulator under hw state
    machine
  arm64: dts: imx8mn-bsh-smm-s2-common: Keep wifi enable during suspend
  arm64: dts: imx8mn-bsh-smm-s2: Use minimum-ecc for nand controller

Simon Holesch (2):
  arm64: dts: imx8mn-bsh-smm-s2-common: Pull Up Console UART pins
  arm64: dts: imx8mn-bsh-smm-s2: Enable the bbt on flash

Wolfgang Birkner (4):
  arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for
    VDD_DRAM_VPU_GPU
  arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for VDD_3V3
  arm64: dts: imx8mn-bsh-smm-s2-common: Increase drive strength of pmic
    irq
  arm64: dts: imx8mn-bsh-smm-s2-common: Disable PMIC SNVS reset target
    state

 .../boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts   |  1 +
 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   | 36 +++++++++++++++----
 .../boot/dts/freescale/imx8mn-bsh-smm-s2.dts  |  2 ++
 3 files changed, 33 insertions(+), 6 deletions(-)