[v3,00/18] ram: rk3399: Add rank detection
mbox series

Message ID 20190715182856.21688-1-jagan@amarulasolutions.com
Headers show
Series
  • ram: rk3399: Add rank detection
Related show

Message

Jagan Teki July 15, 2019, 6:28 p.m. UTC
This is v3, version of dynamic rank detection changes from 
previous lpddr4 changes[1].

rank detection would required for probing single channel
ddr configuration like NanoPi NEO4.

Changes for v3:
- rebase in master
- order them in proper way

[1] https://patchwork.ozlabs.org/cover/1116734/

Any inputs?
Jagan.

Jagan Teki (18):
  ram: rk3399: Handle data training return types
  ram: rk3399: Clear PI_175 interrupts in data training
  ram: rk3399: Use rank mask in ca data training
  ram: rk3399: Use rank mask in wdql data training
  ram: rk3399: Add phy pctrl reset support
  ram: rk3399: Move pwrup_srefresh_exit to dram_info
  ram: rk3399: Add pctl start support
  ram: rockchip: Add initial Kconfig
  debug_uart: Add printdec
  ram: rockchip: Add debug sdram driver
  ram: rockchip: debug: Add sdram_print_ddr_info
  ram: rockchip: debug: Get the cs capacity
  ram: rk3399: debug: Add sdram_print_stride
  ram: rk3399: Compute stride for 2 channels
  ram: rk3399: Compute stride for 1 channel a
  ram: rk3399: Add rank detection support
  ram: rk3399: Enable sdram debug functions
  rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi

 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi   |   1 +
 .../include/asm/arch-rockchip/sdram_common.h  |  21 +
 drivers/ram/Kconfig                           |   1 +
 drivers/ram/rockchip/Kconfig                  |  26 ++
 drivers/ram/rockchip/Makefile                 |   3 +-
 drivers/ram/rockchip/sdram_debug.c            | 147 +++++++
 drivers/ram/rockchip/sdram_rk3399.c           | 366 +++++++++++++++---
 include/debug_uart.h                          |  19 +
 8 files changed, 529 insertions(+), 55 deletions(-)
 create mode 100644 drivers/ram/rockchip/Kconfig
 create mode 100644 drivers/ram/rockchip/sdram_debug.c