[3/9] spi: Kconfig: Move MSCC_BB_SPI, FSL_QSPI into DM_SPI
diff mbox series

Message ID 20200526080430.118262-4-jagan@amarulasolutions.com
State New
Headers show
Series
  • spi: dm-convert and cleanups
Related show

Commit Message

Jagan Teki May 26, 2020, 8:04 a.m. UTC 
- MSCC_BB_SPI
- FSL_QSPI

Both are fully dm-driven, let's move them into DM_SPI
side definition.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/spi/Kconfig | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

Comments

Jagan Teki May 27, 2020, 6:22 p.m. UTC | #1 
On Tue, May 26, 2020 at 1:34 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> - MSCC_BB_SPI
> - FSL_QSPI
>
> Both are fully dm-driven, let's move them into DM_SPI
> side definition.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---

Applied to u-boot-spi/master

Patch
diff mbox series 

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 658a48e57a..59415209ee 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -141,6 +141,14 @@  config FSL_DSPI
 	  this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms
 	  use this driver.
 
+config FSL_QSPI
+	bool "Freescale QSPI driver"
+	imply SPI_FLASH_BAR
+	help
+	  Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
+	  used to access the SPI NOR flash on platforms embedding this
+	  Freescale IP core.
+
 config ICH_SPI
 	bool "Intel ICH SPI driver"
 	help
@@ -167,6 +175,13 @@  config MPC8XXX_SPI
 	help
 	  Enable support for SPI on the MPC8XXX PowerPC SoCs.
 
+config MSCC_BB_SPI
+	bool "MSCC bitbang SPI driver"
+	depends on SOC_VCOREIII
+	help
+	  Enable MSCC bitbang SPI driver. This driver can be used on
+	  MSCC SOCs.
+
 config MT7621_SPI
 	bool "MediaTek MT7621 SPI driver"
 	depends on SOC_MT7628
@@ -377,13 +392,6 @@  config SOFT_SPI
 	 Enable Soft SPI driver. This driver is to use GPIO simulate
 	 the SPI protocol.
 
-config MSCC_BB_SPI
-	bool "MSCC bitbang SPI driver"
-	depends on SOC_VCOREIII
-	help
-	  Enable MSCC bitbang SPI driver. This driver can be used on
-	  MSCC SOCs.
-
 config FSL_ESPI
 	bool "Freescale eSPI driver"
 	imply SPI_FLASH_BAR
@@ -392,14 +400,6 @@  config FSL_ESPI
 	  access the SPI interface and SPI NOR flash on platforms embedding
 	  this Freescale eSPI IP core.
 
-config FSL_QSPI
-	bool "Freescale QSPI driver"
-	imply SPI_FLASH_BAR
-	help
-	  Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
-	  used to access the SPI NOR flash on platforms embedding this
-	  Freescale IP core.
-
 config DAVINCI_SPI
 	bool "Davinci & Keystone SPI driver"
 	depends on ARCH_DAVINCI || ARCH_KEYSTONE