From patchwork Tue May 26 17:44:40 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 1259 Return-Path: X-Original-To: linux-amarula@patchwork.amarulasolutions.com Delivered-To: linux-amarula@patchwork.amarulasolutions.com Received: from mail-il1-f200.google.com (mail-il1-f200.google.com [209.85.166.200]) by ganimede.amarulasolutions.com (Postfix) with ESMTPS id C69DF3F1DD for ; Tue, 26 May 2020 19:45:25 +0200 (CEST) Received: by mail-il1-f200.google.com with SMTP id k77sf3041873ilg.7 for ; Tue, 26 May 2020 10:45:25 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1590515125; cv=pass; d=google.com; s=arc-20160816; b=xjRwNZEhkqF6SZ8Q8lF7IUzxm4oVG0vawuCxvCmUz7ei+VnVBYxhGLpav+nV++LLsU U2a78Ka5LP+l/5x+H3SMGDSHl5DviFFK+3uzZ5ryNV3X2vAEbyAX4LNaVkChYwpYLItV JWyveKRn5Xxnzpt2XhBxpL0lvDXYCAR6bI6fmtQ6DYkiTejPDaVa8KfdeyBeuBLSi2LM kCE6O3iTqrcZmgNrL27u8kAHqqLWgYt9mkkHP8hnDOn3lXY854FJTUAz3Zv81HcIViUG 1HgAllZQvFif2GUjjRVmIx/4MSEOHtU/cT8/D4Ali6yTMnBJm+dyvhAz+65ZuDI1GS+j DpbA== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-unsubscribe:list-archive:list-help:list-post:list-id :mailing-list:precedence:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=i6MlQ7o9KjLOfpkzt8dqj08b/Rzq4RWuKwq2Ys3RxsE=; b=P4AL1v67LuFGZ4S5R4w9pM635h3ISJeWyZShS4jDiRRkA9NpkZDHF9yaMj4IHnUxRK KR5A1FHwTrXvI3yPH1AZ08kXEVF7nNAqtqjO9H8SUGrij7lC0E+RtWrWa3whNk89AISW 58H5svz87g3slynHtVCRaWgBarpjaFXTB2+ErQDKETOKr96uI1rpwvD6z51S0ERtkTfI H7LjXQlyrr2Ac3O+E/2lpF1HL/kIWWNrF7pjvy4H2pWshszegmCLv6W+GPzCAva1m1HA Ig3/sKvhAgMB62r34fv3GvIZ64kXQWwxEaKP4aq+CoXder5GBJq0WGrQdnmOq0lLzs8T q7PQ== ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=mrwg9AdM; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:x-original-sender:x-original-authentication-results :precedence:mailing-list:list-id:list-post:list-help:list-archive :list-unsubscribe; bh=i6MlQ7o9KjLOfpkzt8dqj08b/Rzq4RWuKwq2Ys3RxsE=; b=TxL5kKdVCLHLx5Ofx5x+XQWi3NFZ3abJ8Xy17O36l+leEwGyh771HfsPc6x8jL/qGt ZdlRpgvjSMdoMTx9R0EVDli1215ZUuWRB59JceTD/IOVAwBAAuZDn7v86Vrmiajcz+1p IBPCbALHPwymoLtUe6YuUI3eOtOrJSvumTeRE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:x-original-sender :x-original-authentication-results:precedence:mailing-list:list-id :x-spam-checked-in-group:list-post:list-help:list-archive :list-unsubscribe; bh=i6MlQ7o9KjLOfpkzt8dqj08b/Rzq4RWuKwq2Ys3RxsE=; b=HKQlqYfEusP708QlFkg8CWt1xnq80w7zG/A7O6Iocv68SBL2FxFY+5kfa9PwqaCXqt PAZ/ol5kQzU0WDSoukjbApilNYqpMp3goTiC2/caX24qMiWQApEP9onEVjV9cOdZ6cUz Mn1xgmN2XV05RHo8F7Q+vCbvleHV0fuLaJ8bQAgbgFJL1iIqlrL00iOcyKob944AXryF rNBN5Uv/zquJUh38ZfmAipe71vd7F+aKQ3MPyVohyOureBJ1fCsKCBGkI54RSAS/2Lt7 BkFETeq+56js8xOIARlmuI9MX8pgd4wbWYEMduKEd+UG4eLpXJzVMkdlT54PtwDeyj9S engA== X-Gm-Message-State: AOAM531NL7H4Q+rgNTBi4wzEPUgp9CZcHLFOaxs0qOMxNtO+PLbDy0by Zj9eRYgVHYbNrA4jnrW/PpkWqn5G X-Google-Smtp-Source: ABdhPJw7Vup/sU9slmw5lC13fYLCEYBLO+99DWdiBpYo+2ywCfAmgAvdk0YausehiC6Nwer21/Tu7g== X-Received: by 2002:a5d:9dd2:: with SMTP id 18mr8686121ioo.196.1590515124256; Tue, 26 May 2020 10:45:24 -0700 (PDT) X-BeenThere: linux-amarula@amarulasolutions.com Received: by 2002:a5d:9718:: with SMTP id h24ls1837353iol.9.gmail; Tue, 26 May 2020 10:45:23 -0700 (PDT) X-Received: by 2002:a5e:8e47:: with SMTP id r7mr3540798ioo.204.1590515122863; Tue, 26 May 2020 10:45:22 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1590515122; cv=none; d=google.com; s=arc-20160816; b=x4HQ2bVN/OWmOh+jsbUrMMSj9pCkZOAhoy0CoK25Kq0Xyj09/pPm5Rv1zvpKo5gQdk BhZzipUaeZtbVAF3AbBeFXAnqpJN2SRKSgNfqZ6FTEFd5n+1w0ZNve4zi4x/EXCejq1d SHYhOTepddcvSHSdgm1X8wBGrjmA9hXPQurxEKOTN91U4TI1oJ167Rfh9Fg30f4hmsmg t1x5EjWp68GfQNCiVEdf+2pgqE07BBep4LUSDZfm5WRLBxX5hpPqJwVIrY1OjQ0A8RiJ JaBZz+wC6ouMuK2f4LHxmEg3T0CRgq0NHVA7DF1e6cvig00JGmCBZ1wHOOMYCGxUh+4G 5QmQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=dZm50a4WXvPytDNlHEctDkKVNgTm9vSRUGQpuFcgaG4=; b=GVgM3P5BBFF+3XCCbHPhSrbgmPx9zJqmi35cnBAeP/5nzuE+NM+xMXLy5xcpMOZ+RS Ja7SZde4fkU1v4vFyPEVPMEOKTv10lvJUKH0WEpmnRx3aZDBIohDeD5KhPTivY2dfnnD SZzFWVVAh6vsfuEKu2Q0xhCwOtHIz1IBpKr9uq62CNO+Oghe/bsZ+GeJuTPD0p48b6/h dKHTWF0tH9KHvQNRNzOkRGH5l2pMAiGzs6npz+xtCLh3U3HoV/4r0qht7zAZumEVeTgN LOt1SyJdIDKI8eZ26lAI0bbX9XipX/JXajhxzSR+4ng68AHWdTCx5HuHahWL1VYVW2Bw moxw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=mrwg9AdM; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Received: from mail-sor-f65.google.com (mail-sor-f65.google.com. [209.85.220.65]) by mx.google.com with SMTPS id x18sor604775ilp.147.2020.05.26.10.45.22 for (Google Transport Security); Tue, 26 May 2020 10:45:22 -0700 (PDT) Received-SPF: pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) client-ip=209.85.220.65; X-Received: by 2002:a17:902:10e:: with SMTP id 14mr2160966plb.180.1590515121482; Tue, 26 May 2020 10:45:21 -0700 (PDT) Received: from localhost.localdomain ([2405:201:c809:c7d5:34bf:6d2b:f49c:646b]) by smtp.gmail.com with ESMTPSA id x20sm136232pfc.211.2020.05.26.10.45.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 26 May 2020 10:45:20 -0700 (PDT) From: Jagan Teki To: Simon Glass , Tom Rini Cc: u-boot@lists.denx.de, linux-amarula@amarulasolutions.com, Jagan Teki , Steve Sakoman Subject: [PATCH 05/14] Overo: Drop omap3 overo Date: Tue, 26 May 2020 23:14:40 +0530 Message-Id: <20200526174444.262050-6-jagan@amarulasolutions.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200526174444.262050-1-jagan@amarulasolutions.com> References: <20200526174444.262050-1-jagan@amarulasolutions.com> MIME-Version: 1.0 X-Original-Sender: jagan@amarulasolutions.com X-Original-Authentication-Results: mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=mrwg9AdM; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Content-Type: text/plain; charset="UTF-8" Precedence: list Mailing-list: list linux-amarula@amarulasolutions.com; contact linux-amarula+owners@amarulasolutions.com List-ID: X-Spam-Checked-In-Group: linux-amarula@amarulasolutions.com X-Google-Group-Id: 476853432473 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Steve Sakoman Signed-off-by: Jagan Teki --- arch/arm/mach-omap2/omap3/Kconfig | 13 - board/overo/Kconfig | 9 - board/overo/MAINTAINERS | 6 - board/overo/Makefile | 10 - board/overo/common.c | 368 -------------------------- board/overo/overo.c | 411 ------------------------------ board/overo/overo.h | 169 ------------ board/overo/spl.c | 61 ----- configs/omap3_overo_defconfig | 53 ---- doc/README.omap3 | 6 - include/configs/omap3_overo.h | 184 ------------- 11 files changed, 1290 deletions(-) delete mode 100644 board/overo/Kconfig delete mode 100644 board/overo/MAINTAINERS delete mode 100644 board/overo/Makefile delete mode 100644 board/overo/common.c delete mode 100644 board/overo/overo.c delete mode 100644 board/overo/overo.h delete mode 100644 board/overo/spl.c delete mode 100644 configs/omap3_overo_defconfig delete mode 100644 include/configs/omap3_overo.h diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 34a845e9b6..306c2596d3 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -68,18 +68,6 @@ config TARGET_OMAP3_IGEP00X0 select OMAP3_GPIO_6 imply CMD_DM -config TARGET_OMAP3_OVERO - bool "OMAP35xx Gumstix Overo" - select DM - select DM_GPIO - select DM_SERIAL - select OMAP3_GPIO_2 - select OMAP3_GPIO_3 - select OMAP3_GPIO_4 - select OMAP3_GPIO_5 - select OMAP3_GPIO_6 - imply CMD_DM - config TARGET_OMAP3_ZOOM1 bool "TI Zoom1" select DM @@ -171,7 +159,6 @@ source "board/ti/beagle/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" -source "board/overo/Kconfig" source "board/logicpd/zoom1/Kconfig" source "board/ti/am3517crane/Kconfig" source "board/pandora/Kconfig" diff --git a/board/overo/Kconfig b/board/overo/Kconfig deleted file mode 100644 index 74572a62be..0000000000 --- a/board/overo/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_OMAP3_OVERO - -config SYS_BOARD - default "overo" - -config SYS_CONFIG_NAME - default "omap3_overo" - -endif diff --git a/board/overo/MAINTAINERS b/board/overo/MAINTAINERS deleted file mode 100644 index 8f089e87f8..0000000000 --- a/board/overo/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -OVERO BOARD -M: Steve Sakoman -S: Maintained -F: board/overo/ -F: include/configs/omap3_overo.h -F: configs/omap3_overo_defconfig diff --git a/board/overo/Makefile b/board/overo/Makefile deleted file mode 100644 index b62bab9fe4..0000000000 --- a/board/overo/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -ifdef CONFIG_SPL_BUILD -obj-y := spl.o common.o -else -obj-y := overo.o common.o -endif diff --git a/board/overo/common.c b/board/overo/common.c deleted file mode 100644 index 67823e68b6..0000000000 --- a/board/overo/common.c +++ /dev/null @@ -1,368 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Maintainer : Steve Sakoman - * - * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by - * Richard Woodruff - * Syed Mohammed Khasim - * Sunil Kumar - * Shashi Ranjan - * - * (C) Copyright 2004-2008 - * Texas Instruments, - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define TWL4030_I2C_BUS 0 - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* board id for Linux */ - gd->bd->bi_arch_number = MACH_TYPE_OVERO; - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} -#endif - -#if defined(CONFIG_MMC) -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif - -#if defined(CONFIG_SPL_OS_BOOT) -int spl_start_uboot(void) -{ - /* break into full u-boot on 'c' */ - if (serial_tstc() && serial_getc() == 'c') - return 1; - - return 0; -} -#endif /* CONFIG_SPL_OS_BOOT */ - -#define MUX_OVERO() \ - /*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - /*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /*GPIO_54*/\ - /* - MMC1_WP*/\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) /*GPMC_nCS7*/\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - /*CAMERA*/\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | DIS | M0)) /*CAM_HS */\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | DIS | M0)) /*CAM_VS */\ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | DIS | M0)) /*CAM_PCLK*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\ - /*Audio Interface */\ - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ - MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ - /*Expansion card */\ - MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) /*MMC1_CLK*/\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ - MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ - /*Wireless LAN */\ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ - /*Bluetooth*/\ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ - MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ - MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ - MUX_VAL(CP(UART1_RTS), (IEN | PTU | DIS | M4)) /*GPIO_149*/ \ - MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M0)) /*McBSP4_CLKX*/\ - MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M0)) /*McBSP4_DR*/\ - MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M0)) /*McBSP4_DX*/\ - MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M0)) /*McBSP4_FSX*/\ - MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) /*McBSP1_CLKR*/\ - MUX_VAL(CP(MCBSP1_FSR), (IEN | PTD | DIS | M0)) /*McBSP1_FSR*/\ - MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M0)) /*McBSP1_DX*/\ - MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) /*McBSP1_DR*/\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ - MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) /*McBSP1_FSX*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) /*McBSP1_CLKX*/\ - /*Serial Interface*/\ - MUX_VAL(CP(UART3_RTS_SD), (IEN | PTU | EN | M4)) /*GPIO_164 W2W_*/\ - /* BT_NRESET*/\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTU | EN | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ - /* - USBH_CPEN*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ - /* - USBH_RESET*/\ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA2*/\ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA7*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA4*/\ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA5*/\ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA6*/\ - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA3*/\ - /*Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\ - MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M4)) /*GPIO_16*/\ - /* - W2W_NRESET*/\ - MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DIR*/\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_NXT*/\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA0*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DATA1*/\ - /* die to die */\ - MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ - MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ - MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ - MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ - MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ - MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ - MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ - MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ - MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ - MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ - MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ - MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ - MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ - MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ - MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ - MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ - MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ - MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ - MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ - MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ - MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ - MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ - MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ - MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ - MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ - MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ - MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ - MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ - MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ - MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ - MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ - MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ - MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ - -/* - * Routine: get_board_revision - * Description: Returns the board revision - */ -int get_board_revision(void) -{ - int revision; - - if (!gpio_request(112, "") && - !gpio_request(113, "") && - !gpio_request(115, "")) { - - gpio_direction_input(112); - gpio_direction_input(113); - gpio_direction_input(115); - - revision = gpio_get_value(115) << 2 | - gpio_get_value(113) << 1 | - gpio_get_value(112); - } else { - puts("Error: unable to acquire board revision GPIOs\n"); - revision = -1; - } - - return revision; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_OVERO(); -} diff --git a/board/overo/overo.c b/board/overo/overo.c deleted file mode 100644 index 5450f5d11c..0000000000 --- a/board/overo/overo.c +++ /dev/null @@ -1,411 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Maintainer : Steve Sakoman - * - * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by - * Richard Woodruff - * Syed Mohammed Khasim - * Sunil Kumar - * Shashi Ranjan - * - * (C) Copyright 2004-2008 - * Texas Instruments, - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "overo.h" - -#ifdef CONFIG_USB_EHCI_HCD -#include -#include -#endif - -#define TWL4030_I2C_BUS 0 -#define EXPANSION_EEPROM_I2C_BUS 2 -#define EXPANSION_EEPROM_I2C_ADDRESS 0x51 - -#define GUMSTIX_EMPTY_EEPROM 0x0 - -#define GUMSTIX_SUMMIT 0x01000200 -#define GUMSTIX_TOBI 0x02000200 -#define GUMSTIX_TOBI_DUO 0x03000200 -#define GUMSTIX_PALO35 0x04000200 -#define GUMSTIX_PALO43 0x05000200 -#define GUMSTIX_CHESTNUT43 0x06000200 -#define GUMSTIX_PINTO 0x07000200 -#define GUMSTIX_GALLOP43 0x08000200 -#define GUMSTIX_ALTO35 0x09000200 -#define GUMSTIX_STAGECOACH 0x0A000200 -#define GUMSTIX_THUMBO 0x0B000200 -#define GUMSTIX_TURTLECORE 0x0C000200 -#define GUMSTIX_ARBOR43C 0x0D000200 - -#define ETTUS_USRP_E 0x01000300 - -#define GUMSTIX_NO_EEPROM 0xffffffff - -static struct { - unsigned int device_vendor; - unsigned char revision; - unsigned char content; - char fab_revision[8]; - char env_var[16]; - char env_setting[64]; -} expansion_config = {0x0}; - -static const struct ns16550_platdata overo_serial = { - .base = OMAP34XX_UART3, - .reg_shift = 2, - .clock = V_NS16550_CLK, - .fcr = UART_FCR_DEFVAL, -}; - -U_BOOT_DEVICE(overo_uart) = { - "ns16550_serial", - &overo_serial -}; - -/* - * Routine: get_sdio2_config - * Description: Return information about the wifi module connection - * Returns 0 if the module connects though a level translator - * Returns 1 if the module connects directly - */ -int get_sdio2_config(void) -{ - int sdio_direct; - - if (!gpio_request(130, "") && !gpio_request(139, "")) { - - gpio_direction_output(130, 0); - gpio_direction_input(139); - - sdio_direct = 1; - gpio_set_value(130, 0); - if (gpio_get_value(139) == 0) { - gpio_set_value(130, 1); - if (gpio_get_value(139) == 1) - sdio_direct = 0; - } - - gpio_direction_input(130); - } else { - puts("Error: unable to acquire sdio2 clk GPIOs\n"); - sdio_direct = -1; - } - - return sdio_direct; -} - -/* - * Routine: get_expansion_id - * Description: This function checks for expansion board by checking I2C - * bus 2 for the availability of an AT24C01B serial EEPROM. - * returns the device_vendor field from the EEPROM - */ -unsigned int get_expansion_id(void) -{ - if (expansion_config.device_vendor != 0x0) - return expansion_config.device_vendor; - - i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); - - /* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */ - if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) { - i2c_set_bus_num(TWL4030_I2C_BUS); - return GUMSTIX_NO_EEPROM; - } - - /* read configuration data */ - i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, - sizeof(expansion_config)); - - i2c_set_bus_num(TWL4030_I2C_BUS); - - return expansion_config.device_vendor; -} - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - unsigned int expansion_id; - - twl4030_power_init(); - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); - - printf("Board revision: %d\n", get_board_revision()); - - switch (get_sdio2_config()) { - case 0: - puts("Tranceiver detected on mmc2\n"); - MUX_OVERO_SDIO2_TRANSCEIVER(); - break; - case 1: - puts("Direct connection on mmc2\n"); - MUX_OVERO_SDIO2_DIRECT(); - break; - default: - puts("Unable to detect mmc2 connection type\n"); - } - - expansion_id = get_expansion_id(); - switch (expansion_id) { - case GUMSTIX_SUMMIT: - printf("Recognized Summit expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - env_set("defaultdisplay", "dvi"); - env_set("expansionname", "summit"); - break; - case GUMSTIX_TOBI: - printf("Recognized Tobi expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - env_set("defaultdisplay", "dvi"); - env_set("expansionname", "tobi"); - break; - case GUMSTIX_TOBI_DUO: - printf("Recognized Tobi Duo expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - env_set("expansionname", "tobiduo"); - break; - case GUMSTIX_PALO35: - printf("Recognized Palo35 expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - env_set("defaultdisplay", "lcd35"); - env_set("expansionname", "palo35"); - break; - case GUMSTIX_PALO43: - printf("Recognized Palo43 expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - env_set("defaultdisplay", "lcd43"); - env_set("expansionname", "palo43"); - break; - case GUMSTIX_CHESTNUT43: - printf("Recognized Chestnut43 expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - env_set("defaultdisplay", "lcd43"); - env_set("expansionname", "chestnut43"); - break; - case GUMSTIX_PINTO: - printf("Recognized Pinto expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - break; - case GUMSTIX_GALLOP43: - printf("Recognized Gallop43 expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - env_set("defaultdisplay", "lcd43"); - env_set("expansionname", "gallop43"); - break; - case GUMSTIX_ALTO35: - printf("Recognized Alto35 expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - MUX_ALTO35(); - env_set("defaultdisplay", "lcd35"); - env_set("expansionname", "alto35"); - break; - case GUMSTIX_STAGECOACH: - printf("Recognized Stagecoach expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - break; - case GUMSTIX_THUMBO: - printf("Recognized Thumbo expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - break; - case GUMSTIX_TURTLECORE: - printf("Recognized Turtlecore expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - break; - case GUMSTIX_ARBOR43C: - printf("Recognized Arbor43C expansion board (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - MUX_ARBOR43C(); - env_set("defaultdisplay", "lcd43"); - env_set("expansionname", "arbor43c"); - break; - case ETTUS_USRP_E: - printf("Recognized Ettus Research USRP-E (rev %d %s)\n", - expansion_config.revision, - expansion_config.fab_revision); - MUX_GUMSTIX(); - MUX_USRP_E(); - env_set("defaultdisplay", "dvi"); - break; - case GUMSTIX_NO_EEPROM: - case GUMSTIX_EMPTY_EEPROM: - puts("No or empty EEPROM on expansion board\n"); - MUX_GUMSTIX(); - env_set("expansionname", "tobi"); - break; - default: - printf("Unrecognized expansion board 0x%08x\n", expansion_id); - break; - } - - if (expansion_config.content == 1) - env_set(expansion_config.env_var, expansion_config.env_setting); - - omap_die_id_display(); - - if (get_cpu_family() == CPU_OMAP34XX) - env_set("boardname", "overo"); - else - env_set("boardname", "overo-storm"); - - return 0; -} - -#if defined(CONFIG_CMD_NET) -/* GPMC definitions for LAN9221 chips on Tobi expansion boards */ -static const u32 gpmc_lan_config[] = { - NET_LAN9221_GPMC_CONFIG1, - NET_LAN9221_GPMC_CONFIG2, - NET_LAN9221_GPMC_CONFIG3, - NET_LAN9221_GPMC_CONFIG4, - NET_LAN9221_GPMC_CONFIG5, - NET_LAN9221_GPMC_CONFIG6, - /*CONFIG7- computed as params */ -}; - -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); -} - -/* - * Routine: reset_net_chip - * Description: Reset the Ethernet hardware. - */ -static void reset_net_chip(void) -{ - /* Make GPIO 64 as output pin and send a magic pulse through it */ - if (!gpio_request(64, "")) { - gpio_direction_output(64, 0); - gpio_set_value(64, 1); - udelay(1); - gpio_set_value(64, 0); - udelay(1); - gpio_set_value(64, 1); - } -} - -int board_eth_init(bd_t *bis) -{ - unsigned int expansion_id; - int rc = 0; - -#ifdef CONFIG_SMC911X - expansion_id = get_expansion_id(); - switch (expansion_id) { - case GUMSTIX_TOBI_DUO: - /* second lan chip */ - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], - 0x2B000000, GPMC_SIZE_16M); - /* no break */ - case GUMSTIX_TOBI: - case GUMSTIX_CHESTNUT43: - case GUMSTIX_STAGECOACH: - case GUMSTIX_NO_EEPROM: - case GUMSTIX_EMPTY_EEPROM: - /* first lan chip */ - enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], - 0x2C000000, GPMC_SIZE_16M); - - setup_net_chip(); - reset_net_chip(); - - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - break; - default: - break; - } -#endif - - return rc; -} -#endif - -#if defined(CONFIG_USB_EHCI_HCD) -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED -}; - -#define GUMSTIX_GPIO_USBH_CPEN 168 -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - /* Enable USB power */ - if (!gpio_request(GUMSTIX_GPIO_USBH_CPEN, "usbh_cpen")) - gpio_direction_output(GUMSTIX_GPIO_USBH_CPEN, 1); - - return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); -} - -int ehci_hcd_stop(void) -{ - /* Disable USB power */ - gpio_set_value(GUMSTIX_GPIO_USBH_CPEN, 0); - gpio_free(GUMSTIX_GPIO_USBH_CPEN); - - return omap_ehci_hcd_stop(); -} - -#endif /* CONFIG_USB_EHCI_HCD */ diff --git a/board/overo/overo.h b/board/overo/overo.h deleted file mode 100644 index 513a3e3d63..0000000000 --- a/board/overo/overo.h +++ /dev/null @@ -1,169 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2008 - * Steve Sakoman - */ -#ifndef _OVERO_H_ -#define _OVERO_H_ - -const omap3_sysinfo sysinfo = { - DDR_STACKED, - "Gumstix Overo board", -#if defined(CONFIG_ENV_IS_IN_ONENAND) - "OneNAND", -#else - "NAND", -#endif -}; - -int get_board_revision(void); - -/* overo revisions */ -#define REVISION_0 0x0 -#define REVISION_1 0x1 -#define REVISION_2 0x2 -#define REVISION_3 0x3 -#define REVISION_4 0x4 - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_GUMSTIX() \ - /*GPMC*/\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ - MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) /*GPMC_nCS6*/\ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) /*GPIO_63*/\ - /* - CAM_IRQ*/\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ - /* - SMSC911X_NRES*/\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4)) /*GPIO_65*/\ - /*DSS*/\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ - /*CAMERA*/\ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*CAM_FLD*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\ - /* - PEN_DOWN*/\ - /*Bluetooth*/\ - MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144 - LCD_EN*/\ - MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\ - MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\ - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M4)) /*GPIO_150-MMC3_WP*/\ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - /*Serial Interface*/\ - MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ - MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*HDQ_SIO*/\ - MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) /*McSPI1_CLK*/\ - MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) /*McSPI1_SIMO */\ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI */\ - MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ - MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176 */\ - /* - LAN_INTR */\ - /*Control and debug */\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ - MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\ - MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\ - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT3*/\ - MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\ - MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\ - MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4)) /*GPIO_21*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4)) /*GPIO_22*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\ - -#define MUX_OVERO_SDIO2_DIRECT() \ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M0)) /*MMC2_DAT4*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M0)) /*MMC2_DAT5*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M0)) /*MMC2_DAT6*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)) /*MMC2_DAT7*/\ - MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\ - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/ - -#define MUX_OVERO_SDIO2_TRANSCEIVER() \ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\ - MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) /*GPIO_126*/\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\ - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/ - -#define MUX_USRP_E() \ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M4)) /*GPIO_173 */\ - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M4)) /*GPIO_175 */\ - -#define MUX_ALTO35() \ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10-BTN*/\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M4)) /*GPIO_148-RED LED*/\ - MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150-YELLOW LED*/\ - MUX_VAL(CP(UART1_RX), (IDIS | PTD | DIS | M4)) /*GPIO_151-BLUE LED*/\ - MUX_VAL(CP(HDQ_SIO), (IDIS | PTD | DIS | M4)) /*GPIO_170-GREEN LED*/\ - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M4)) /*GPIO_175*/\ - -#define MUX_ARBOR43C() \ - MUX_VAL(CP(CSI2_DX1), (IDIS | PTD | DIS | M4)) /*GPIO_114-RED LED*/\ - MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150-YELLOW LED*/\ - MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) /*GPIO_170-BUTTON */\ - MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)) /*GPIO_186-BLUE LED*/\ - MUX_VAL(CP(JTAG_EMU1), (IDIS | PTD | DIS | M4)) /*GPIO_31-CAP WAKE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10-CAP IRQ*/\ - -#endif diff --git a/board/overo/spl.c b/board/overo/spl.c deleted file mode 100644 index 91d8091d25..0000000000 --- a/board/overo/spl.c +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Maintainer : Steve Sakoman - * - * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by - * Richard Woodruff - * Syed Mohammed Khasim - * Sunil Kumar - * Shashi Ranjan - * - * (C) Copyright 2004-2008 - * Texas Instruments, - */ - -#include -#include -#include -#include -#include "overo.h" - -/* - * Routine: get_board_mem_timings - * Description: If we use SPL then there is no x-loader nor config header - * so we have to setup the DDR timings ourself on both banks. - */ -void get_board_mem_timings(struct board_sdrc_timings *timings) -{ - timings->mr = MICRON_V_MR_165; - switch (get_board_revision()) { - case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */ - timings->mcfg = MICRON_V_MCFG_165(256 << 20); - timings->ctrla = MICRON_V_ACTIMA_165; - timings->ctrlb = MICRON_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - break; - case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */ - case REVISION_4: - timings->mcfg = MICRON_V_MCFG_200(256 << 20); - timings->ctrla = MICRON_V_ACTIMA_200; - timings->ctrlb = MICRON_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - break; - case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */ - timings->mcfg = HYNIX_V_MCFG_200(256 << 20); - timings->ctrla = HYNIX_V_ACTIMA_200; - timings->ctrlb = HYNIX_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - break; - case REVISION_3: /* Micron 512MB/1024MB, 1/2 banks of 512MB */ - timings->mcfg = MCFG(512 << 20, 15); - timings->ctrla = MICRON_V_ACTIMA_200; - timings->ctrlb = MICRON_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - break; - default: - timings->mcfg = MICRON_V_MCFG_165(128 << 20); - timings->ctrla = MICRON_V_ACTIMA_165; - timings->ctrlb = MICRON_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - } -} diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig deleted file mode 100644 index af9f8a300d..0000000000 --- a/configs/omap3_overo_defconfig +++ /dev/null @@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_ENV_OFFSET=0x240000 -CONFIG_TARGET_OMAP3_OVERO=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0x40200000 -CONFIG_DISTRO_DEFAULTS=y -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="Overo # " -# CONFIG_CMD_IMI is not set -CONFIG_CMD_SPL=y -CONFIG_CMD_SPL_NAND_OFS=0x240000 -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1792k(u-boot),256k(environ),8m(linux),-(rootfs)" -CONFIG_CMD_UBI=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_TWL4030_LED=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SYS_NAND_BUSWIDTH_16BIT=y -CONFIG_SPL_NAND_SIMPLE=y -CONFIG_SMC911X=y -CONFIG_SMC911X_BASE=0x2C000000 -CONFIG_SMC911X_32_BIT=y -CONFIG_CONS_INDEX=3 -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_FAT_WRITE=y -CONFIG_BCH=y -CONFIG_OF_LIBFDT=y diff --git a/doc/README.omap3 b/doc/README.omap3 index 00bcbdba9a..5ff9ee2bae 100644 --- a/doc/README.omap3 +++ b/doc/README.omap3 @@ -56,12 +56,6 @@ make make omap3_zoom2_config make -* CM-T35: - -make cm_t35_config -make - - Custom commands =============== diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h deleted file mode 100644 index 9a5b9f297c..0000000000 --- a/include/configs/omap3_overo.h +++ /dev/null @@ -1,184 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the Gumstix Overo board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include -/* - * We are only ever GP parts and will utilize all of the "downloaded image" - * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). - */ - -/* call misc_init_r */ - -/* pass the revision tag */ -#define CONFIG_REVISION_TAG - -/* override size of malloc() pool */ -#undef CONFIG_SYS_MALLOC_LEN -/* Shift 128 << 15 provides 4 MiB heap to support UBI commands. - * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15)) - -/* I2C Support */ - -/* TWL4030 LED */ - -/* USB EHCI */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 183 - -/* commands to include */ - -#ifdef CONFIG_MTD_RAW_NAND -/* NAND block size is 128 KiB. Synchronize these values with - * overo_nand_partitions in mach-omap2/board-overo.c in Linux: - * xloader 4 * NAND_BLOCK_SIZE = 512 KiB - * uboot 14 * NAND_BLOCK_SIZE = 1792 KiB - * uboot environtment 2 * NAND_BLOCK_SIZE = 256 KiB - * linux 64 * NAND_BLOCK_SIZE = 8 MiB - * rootfs remainder - */ -#endif /* CONFIG_MTD_RAW_NAND */ - -/* Board NAND Info. */ -/* Environment information */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ - "mpurate=auto\0" \ - "optargs=\0" \ - "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "nandroot=ubi0:rootfs ubi.mtd=4\0" \ - "nandrootfstype=ubifs\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running boot script from mmc ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcbootfdt=echo Booting with DT from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "if nand read ${loadaddr} linux; then " \ - "bootm ${loadaddr};" \ - "fi;\0" \ - "nanddtsboot=echo Booting from nand with DTS...; " \ - "run nandargs; " \ - "ubi part rootfs; "\ - "ubifsmount ubi0:rootfs; "\ - "run loadubifdt; "\ - "run loadubizimage; "\ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi;" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loaduimage; then " \ - "run mmcboot;" \ - "fi;" \ - "if run loadzimage; then " \ - "if test -z \"${fdtfile}\"; then " \ - "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ - "fi;" \ - "if run loadfdt; then " \ - "run mmcbootfdt;" \ - "fi;" \ - "fi;" \ - "fi;" \ - "run nandboot; " \ - "if test -z \"${fdtfile}\"; then "\ - "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \ - "fi;" \ - "run nanddtsboot; " \ - -/* memtest works on */ - -/* FLASH and environment organization */ -#if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -/* Initial RAM setup */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 - -/* NAND boot config */ -#define CONFIG_SYS_NAND_MAX_ECCPOS 56 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ - 13, 14, 16, 17, 18, 19, 20, 21, 22, \ - 23, 24, 25, 26, 27, 28, 30, 31, 32, \ - 33, 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 44, 45, 46, 47, 48, 49, 50, 51, \ - 52, 53, 54, 55, 56} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 13 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -#endif /* __CONFIG_H */