From patchwork Tue May 26 17:44:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 1263 Return-Path: X-Original-To: linux-amarula@patchwork.amarulasolutions.com Delivered-To: linux-amarula@patchwork.amarulasolutions.com Received: from mail-pf1-f197.google.com (mail-pf1-f197.google.com [209.85.210.197]) by ganimede.amarulasolutions.com (Postfix) with ESMTPS id B41983F1DD for ; Tue, 26 May 2020 19:45:36 +0200 (CEST) Received: by mail-pf1-f197.google.com with SMTP id 79sf17356810pfv.18 for ; Tue, 26 May 2020 10:45:36 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1590515135; cv=pass; d=google.com; s=arc-20160816; b=KfL+kEJ1KFoH11uYEDii43KsG/L6WVPrtSoxtf9BL1E0q0jJIe3Qu/KaVg4LX1WH1z aIUsRWzbAgrrpue1qIvSfy2yiELUYjGvqBYsS61ahKyL3JpwtK1TD+8lEl764KGnc2+q hhl0KES+cZyAk3xLRisx/kyD/wedrjOsUqzm8CK+V4JCRWPsMj7bgrn2zj2w/qgE35EY zJ8BVhA52lawQhhJjfufTlO75GhAkM0Pc7FhBu3w5QFzH/N3gv8Qnb9+bHT+jZ/3Cu2M L2hw7nLCTCcPkKY1GFeP9mc3ICZxsR8LOqdgfme544S5U9zdb1yPpuejDmLDP9/Z+EM4 960Q== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-unsubscribe:list-archive:list-help:list-post:list-id :mailing-list:precedence:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=GVUMDIykPmuWiUpIBlNkwhrlBfgBGZZD9EqnO15gYak=; b=EMfQICJPhCcOHFuSO/ZBbQyArTyNNVhrAbNcGCY9da4/ffm0gjIcGe0jGL2OAalfdT sPPiIdvZ/H0bLTUHtYdROO5GVaJx17+IZzwIsDXPv9aeG06xSkUhZ897PpdeBD7u+ZFU B6enDoYiLdxJiYF/zmQxomBVFfjMxatGydvWEGROx5700ksdRgbsNHRW8i5AV1456Xij pLNGHlZOhdWj7CIugZh06jMQ1IxpLA4aaiey2djotZltRzdwWdh9DppFaEmMBfgcGmVU xPBVZeZ3c483oQXaqbqCxYj6FhA52kEUexL0Vc5FInCks1yRWjTDxGUSDarFnOHBNGBw 7Djw== ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=ELCLM7w9; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:x-original-sender:x-original-authentication-results :precedence:mailing-list:list-id:list-post:list-help:list-archive :list-unsubscribe; bh=GVUMDIykPmuWiUpIBlNkwhrlBfgBGZZD9EqnO15gYak=; b=YhQuKqR+i9wqvMrXVvZDU9+9VSBfQ5mofzqcRJWydpxlv5pGJPN91KOV1qrwqKjWuV 9PxdssECEhumK93hV2+WkToiCDtd+Ojkiq2Uvf5gCpi58P+H5orEJg5ZHf9iutYFBPoz 8wmpSTG0QMzI5o9nrzsepKebq21cuFBoPUHSE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:x-original-sender :x-original-authentication-results:precedence:mailing-list:list-id :x-spam-checked-in-group:list-post:list-help:list-archive :list-unsubscribe; bh=GVUMDIykPmuWiUpIBlNkwhrlBfgBGZZD9EqnO15gYak=; b=JXHXaCw/4pN0Y/hiCqXz4FKcDezZge/S6M2wn6IeDufNd5bqkRydR3lQODRqYeprm4 RGTfuUInbTN8Y/6TVUB4Mmf6eZipi1CmZ3216+Rq3/Uk+bgHWLBsqeZs9gecjuyCDjkE UC7yK9nAacktUIM3TKp4Z+uWGygp74LD0MD/Q7EnjWk7MD6uLKnXMfWIUq134ohscvC9 wD3oTSt8oWWs//G4mscwUMuak5dg8z/Jdau9/hA1m27V6hZNbygHgRV6mtySjzaNn4JG nICfBc0TO5Gj1DLtQtpvc1qqQLICT8yMIrtxqkmMru3pkEqSRTG2FaZtAb+9pMinWA4j smJA== X-Gm-Message-State: AOAM5301aq5tfY3wmkgFHfaHtGchRGFlHvjrQKS+wbFWsXUDOcNpXXiW N6JJwTXeiGZeGGNr/drG6biO8rnp X-Google-Smtp-Source: ABdhPJwsyBgA1QHucUplEcZ3iwEugJCAEjHoUX1oo0ZYmVSsgA+WU2ff8ZExLvzyY4T7xXNVldHW1Q== X-Received: by 2002:a17:902:c213:: with SMTP id 19mr2139302pll.190.1590515135380; Tue, 26 May 2020 10:45:35 -0700 (PDT) X-BeenThere: linux-amarula@amarulasolutions.com Received: by 2002:a62:1703:: with SMTP id 3ls4085944pfx.8.gmail; Tue, 26 May 2020 10:45:35 -0700 (PDT) X-Received: by 2002:a63:fc1b:: with SMTP id j27mr19754pgi.251.1590515134726; Tue, 26 May 2020 10:45:34 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1590515134; cv=none; d=google.com; s=arc-20160816; b=VMi/xp+7TFvZ8zSPb4rPfSTwvPdBEftSLOhogQkjswgjKdHdqPzX+HL35efcVx3z31 4EJGXoM4qPBIEl7qI68R7gawHx4eVXDf3G02eqRT/Nv23fnD/RYH+bcrRG5xR6G6r1bc DvVMjNKCiKLCkDq0fnUwbUjBlUuSWZUHTvJ+DnkqxeIq4SGm0WBCyqa2WOnvzHPYXd0N klM4tpbYHC1dvH1qgS39vbEMzfpJQB6UPcMTAauXu7cVTd6y42A1IC3MeNeWvWUjCFDE jDwmWOarbmv0UMr+mtufx5uX7Zm4Md+O90pLL02qSz/iUqzEzb4FF6A2osQ6xhbNZr9D Evdw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=Vr+sgZxvn1JmJcTXKuZgFvN6B1JmwZ8V3iRmgKoE/7c=; b=XtYBi8qf8xX6jS14/j92HRXhsXeg2Q+t+zz6OKPlnrk9bOEwdg7IxGjdKTvKSFIwHx hO7yT5j1ilKMdwMcfjrTY2wxme2hdzQ0AfA5djzUTnty9/dUnPl9g8zAfe0GwesceTun 2eHaN17uz+/rcXlsJjdOWtyBhDGDAePDsvuvy8UszvtSf9oTO2Jxh/ZF6GR3nq+7FhiA Vte9oQQuqmNAl40H+UgFbZJXtQ0FqAugVg2FzQPML3LHo2SAtwir0aiUALtu7hF6spIP kfWd+u788kcdd3xkypvrzudl8CdjeE81T/z3RlrEuzAMeX8SBIbxoyJ968qH0W87OxeI fa6g== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=ELCLM7w9; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Received: from mail-sor-f65.google.com (mail-sor-f65.google.com. [209.85.220.65]) by mx.google.com with SMTPS id o30sor595597pgb.82.2020.05.26.10.45.34 for (Google Transport Security); Tue, 26 May 2020 10:45:34 -0700 (PDT) Received-SPF: pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) client-ip=209.85.220.65; X-Received: by 2002:a65:52cd:: with SMTP id z13mr18038pgp.259.1590515134223; Tue, 26 May 2020 10:45:34 -0700 (PDT) Received: from localhost.localdomain ([2405:201:c809:c7d5:34bf:6d2b:f49c:646b]) by smtp.gmail.com with ESMTPSA id x20sm136232pfc.211.2020.05.26.10.45.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 26 May 2020 10:45:33 -0700 (PDT) From: Jagan Teki To: Simon Glass , Tom Rini Cc: u-boot@lists.denx.de, linux-amarula@amarulasolutions.com, Jagan Teki Subject: [PATCH 09/14] gumstix: Drop duovero Date: Tue, 26 May 2020 23:14:44 +0530 Message-Id: <20200526174444.262050-10-jagan@amarulasolutions.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200526174444.262050-1-jagan@amarulasolutions.com> References: <20200526174444.262050-1-jagan@amarulasolutions.com> MIME-Version: 1.0 X-Original-Sender: jagan@amarulasolutions.com X-Original-Authentication-Results: mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=ELCLM7w9; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Content-Type: text/plain; charset="UTF-8" Precedence: list Mailing-list: list linux-amarula@amarulasolutions.com; contact linux-amarula+owners@amarulasolutions.com List-ID: X-Spam-Checked-In-Group: linux-amarula@amarulasolutions.com X-Google-Group-Id: 476853432473 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , DM, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Signed-off-by: Jagan Teki --- arch/arm/mach-omap2/omap4/Kconfig | 4 - board/gumstix/duovero/Kconfig | 12 - board/gumstix/duovero/MAINTAINERS | 6 - board/gumstix/duovero/Makefile | 6 - board/gumstix/duovero/duovero.c | 273 ----------------------- board/gumstix/duovero/duovero_mux_data.h | 198 ---------------- configs/duovero_defconfig | 42 ---- include/configs/duovero.h | 36 --- include/configs/ti_omap4_common.h | 2 - 9 files changed, 579 deletions(-) delete mode 100644 board/gumstix/duovero/Kconfig delete mode 100644 board/gumstix/duovero/MAINTAINERS delete mode 100644 board/gumstix/duovero/Makefile delete mode 100644 board/gumstix/duovero/duovero.c delete mode 100644 board/gumstix/duovero/duovero_mux_data.h delete mode 100644 configs/duovero_defconfig delete mode 100644 include/configs/duovero.h diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig index 49adb8ec5b..899289b645 100644 --- a/arch/arm/mach-omap2/omap4/Kconfig +++ b/arch/arm/mach-omap2/omap4/Kconfig @@ -4,9 +4,6 @@ choice prompt "OMAP4 board select" optional -config TARGET_DUOVERO - bool "OMAP4430 Gumstix Duovero" - config TARGET_OMAP4_PANDA bool "TI OMAP4 PandaBoard" @@ -21,7 +18,6 @@ endchoice config SYS_SOC default "omap4" -source "board/gumstix/duovero/Kconfig" source "board/ti/panda/Kconfig" source "board/ti/sdp4430/Kconfig" source "board/amazon/kc1/Kconfig" diff --git a/board/gumstix/duovero/Kconfig b/board/gumstix/duovero/Kconfig deleted file mode 100644 index 2f8558aaf3..0000000000 --- a/board/gumstix/duovero/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DUOVERO - -config SYS_BOARD - default "duovero" - -config SYS_VENDOR - default "gumstix" - -config SYS_CONFIG_NAME - default "duovero" - -endif diff --git a/board/gumstix/duovero/MAINTAINERS b/board/gumstix/duovero/MAINTAINERS deleted file mode 100644 index 87cd4e670c..0000000000 --- a/board/gumstix/duovero/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DUOVERO BOARD -M: Ash Charles -S: Maintained -F: board/gumstix/duovero/ -F: include/configs/duovero.h -F: configs/duovero_defconfig diff --git a/board/gumstix/duovero/Makefile b/board/gumstix/duovero/Makefile deleted file mode 100644 index d6eff473f8..0000000000 --- a/board/gumstix/duovero/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y := duovero.o diff --git a/board/gumstix/duovero/duovero.c b/board/gumstix/duovero/duovero.c deleted file mode 100644 index 0df03a5a61..0000000000 --- a/board/gumstix/duovero/duovero.c +++ /dev/null @@ -1,273 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2013 - * Gumstix Inc. - * Maintainer: Ash Charles - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "duovero_mux_data.h" - -#define WIFI_EN 43 - -#if defined(CONFIG_CMD_NET) -#define SMSC_NRESET 45 -static void setup_net_chip(void); -#endif - -#ifdef CONFIG_USB_EHCI_HCD -#include -#include -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: duovero\n" -}; - -struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000; - -/** - * @brief board_init - * - * @return 0 - */ -int board_init(void) -{ - gpmc_init(); - - gd->bd->bi_arch_number = MACH_TYPE_DUOVERO; - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -/** - * @brief misc_init_r - Configure board specific configurations - * such as power configurations, ethernet initialization as phase2 of - * boot sequence - * - * @return 0 - */ -int misc_init_r(void) -{ - int ret = 0; - u8 val; - - /* wifi setup: first enable 32Khz clock from 6030 pmic */ - val = 0xe1; - ret = i2c_write(TWL6030_CHIP_PM, 0xbe, 1, &val, 1); - if (ret) - printf("Failed to enable 32Khz clock to wifi module\n"); - - /* then setup WIFI_EN as an output pin and send reset pulse */ - if (!gpio_request(WIFI_EN, "")) { - gpio_direction_output(WIFI_EN, 0); - gpio_set_value(WIFI_EN, 1); - udelay(1); - gpio_set_value(WIFI_EN, 0); - udelay(1); - gpio_set_value(WIFI_EN, 1); - } - -#if defined(CONFIG_CMD_NET) - setup_net_chip(); -#endif - return 0; -} - -void set_muxconf_regs(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_non_essential, - sizeof(core_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_non_essential, - sizeof(wkup_padconf_array_non_essential) / - sizeof(struct pad_conf_entry)); -} - -#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} - -#if !defined(CONFIG_SPL_BUILD) -void board_mmc_power_init(void) -{ - twl6030_power_mmc_init(0); -} -#endif -#endif - -#if defined(CONFIG_CMD_NET) - -#define GPMC_SIZE_16M 0xF -#define GPMC_BASEADDR_MASK 0x3F -#define GPMC_CS_ENABLE 0x1 - -static void enable_gpmc_net_config(const u32 *gpmc_config, const struct gpmc_cs *cs, - u32 base, u32 size) -{ - writel(0, &cs->config7); - sdelay(1000); - /* Delay for settling */ - writel(gpmc_config[0], &cs->config1); - writel(gpmc_config[1], &cs->config2); - writel(gpmc_config[2], &cs->config3); - writel(gpmc_config[3], &cs->config4); - writel(gpmc_config[4], &cs->config5); - writel(gpmc_config[5], &cs->config6); - - /* - * Enable the config. size is the CS size and goes in - * bits 11:8. We set bit 6 to enable this CS and the base - * address goes into bits 5:0. - */ - writel((size << 8) | (GPMC_CS_ENABLE << 6) | - ((base >> 24) & GPMC_BASEADDR_MASK), - &cs->config7); - - sdelay(2000); -} - -/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */ -#define NET_LAN9221_GPMC_CONFIG1 0x2a001203 -#define NET_LAN9221_GPMC_CONFIG2 0x000a0a02 -#define NET_LAN9221_GPMC_CONFIG3 0x00020200 -#define NET_LAN9221_GPMC_CONFIG4 0x0a030a03 -#define NET_LAN9221_GPMC_CONFIG5 0x000a0a0a -#define NET_LAN9221_GPMC_CONFIG6 0x8a070707 -#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c - -/* GPMC definitions for LAN9221 chips on expansion boards */ -static const u32 gpmc_lan_config[] = { - NET_LAN9221_GPMC_CONFIG1, - NET_LAN9221_GPMC_CONFIG2, - NET_LAN9221_GPMC_CONFIG3, - NET_LAN9221_GPMC_CONFIG4, - NET_LAN9221_GPMC_CONFIG5, - NET_LAN9221_GPMC_CONFIG6, - /*CONFIG7- computed as params */ -}; - -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip(void) -{ - enable_gpmc_net_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, - GPMC_SIZE_16M); - - /* Make GPIO SMSC_NRESET as output pin and send reset pulse */ - if (!gpio_request(SMSC_NRESET, "")) { - gpio_direction_output(SMSC_NRESET, 0); - gpio_set_value(SMSC_NRESET, 1); - udelay(1); - gpio_set_value(SMSC_NRESET, 0); - udelay(1); - gpio_set_value(SMSC_NRESET, 1); - } -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} - -#ifdef CONFIG_USB_EHCI_HCD - -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, -}; - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - unsigned int utmi_clk; - u32 auxclk, altclksrc; - - /* Now we can enable our port clocks */ - utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); - utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; - setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk); - - auxclk = readl(&scrm->auxclk3); - /* Select sys_clk */ - auxclk &= ~AUXCLK_SRCSELECT_MASK; - auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT; - /* Set the divisor to 2 */ - auxclk &= ~AUXCLK_CLKDIV_MASK; - auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT; - /* Request auxilary clock #3 */ - auxclk |= AUXCLK_ENABLE_MASK; - writel(auxclk, &scrm->auxclk3); - - altclksrc = readl(&scrm->altclksrc); - - /* Activate alternate system clock supplier */ - altclksrc &= ~ALTCLKSRC_MODE_MASK; - altclksrc |= ALTCLKSRC_MODE_ACTIVE; - - /* enable clocks */ - altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK; - - writel(altclksrc, &scrm->altclksrc); - - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); - if (ret < 0) - return ret; - - return 0; -} - -int ehci_hcd_stop(int index) -{ - return omap_ehci_hcd_stop(); -} -#endif - -/* - * get_board_rev() - get board revision - */ -u32 get_board_rev(void) -{ - return 0x20; -} diff --git a/board/gumstix/duovero/duovero_mux_data.h b/board/gumstix/duovero/duovero_mux_data.h deleted file mode 100644 index b56bffe165..0000000000 --- a/board/gumstix/duovero/duovero_mux_data.h +++ /dev/null @@ -1,198 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2012 - * Gumstix Incorporated, - * Maintainer: Ash Charles - */ -#ifndef _DUOVERO_MUX_DATA_H_ -#define _DUOVERO_MUX_DATA_H_ - -#include - -const struct pad_conf_entry core_padconf_array_essential[] = { - {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ - {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ - {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ - {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ - {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ - {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ - {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ - {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ - {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ - {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ - {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ - {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ - {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ - {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ - {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ - {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ - {UART3_RX_IRRX, (PTU | IEN | M0)}, /* uart3_rx */ - {UART3_TX_IRTX, (M0)} /* uart3_tx */ -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ - {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ - {PAD1_SYS_32K, (IEN | M0)} /* sys_32k */ -}; - -const struct pad_conf_entry core_padconf_array_non_essential[] = { - {GPMC_AD0, (PTU | IEN | M0)}, /* gpmc_ad0 */ - {GPMC_AD1, (PTU | IEN | M0)}, /* gpmc_ad1 */ - {GPMC_AD2, (PTU | IEN | M0)}, /* gpmc_ad2 */ - {GPMC_AD3, (PTU | IEN | M0)}, /* gpmc_ad3 */ - {GPMC_AD4, (PTU | IEN | M0)}, /* gpmc_ad4 */ - {GPMC_AD5, (PTU | IEN | M0)}, /* gpmc_ad5 */ - {GPMC_AD6, (PTU | IEN | M0)}, /* gpmc_ad6 */ - {GPMC_AD7, (PTU | IEN | M0)}, /* gpmc_ad7 */ - {GPMC_AD8, (PTU | IEN | M0)}, /* gpmc_ad8 */ - {GPMC_AD9, (PTU | IEN | M0)}, /* gpmc_ad9 */ - {GPMC_AD10, (PTU | IEN | M0)}, /* gpmc_ad10 */ - {GPMC_AD11, (PTU | IEN | M0)}, /* gpmc_ad11 */ - {GPMC_AD12, (PTU | IEN | M0)}, /* gpmc_ad12 */ - {GPMC_AD13, (PTU | IEN | M0)}, /* gpmc_ad13 */ - {GPMC_AD14, (PTU | IEN | M0)}, /* gpmc_ad14 */ - {GPMC_AD15, (PTU | IEN | M0)}, /* gpmc_ad15 */ - {GPMC_A16, (PTU | IEN | M3)}, /* gpio_40 */ - {GPMC_A17, (PTU | IEN | M3)}, /* gpio_41 - hdmi_ls_oe */ - {GPMC_A18, (PTU | IEN | M3)}, /* gpio_42 */ - {GPMC_A19, (PTU | IEN | M3)}, /* gpio_43 - wifi_en */ - {GPMC_A20, (PTU | IEN | M3)}, /* gpio_44 - eth_irq */ - {GPMC_A21, (PTU | IEN | M3)}, /* gpio_45 - eth_nreset */ - {GPMC_A22, (PTU | IEN | M3)}, /* gpio_46 - eth_pme */ - {GPMC_A23, (PTU | IEN | M3)}, /* gpio_47 */ - {GPMC_A24, (PTU | IEN | M3)}, /* gpio_48 - eth_mdix */ - {GPMC_A25, (PTU | IEN | M3)}, /* gpio_49 - bt_wakeup */ - {GPMC_NCS0, (PTU | M0)}, /* gpmc_ncs0 */ - {GPMC_NCS1, (PTU | M0)}, /* gpmc_ncs1 */ - {GPMC_NCS2, (PTU | M0)}, /* gpmc_ncs2 */ - {GPMC_NCS3, (PTU | IEN | M3)}, /* gpio_53 */ - {C2C_DATA12, (PTU | M0)}, /* gpmc_ncs4 */ - {C2C_DATA13, (PTU | M0)}, /* gpmc_ncs5 - eth_cs */ - {GPMC_NWP, (PTU | IEN | M0)}, /* gpmc_nwp */ - {GPMC_CLK, (PTU | IEN | M0)}, /* gpmc_clk */ - {GPMC_NADV_ALE, (PTU | M0)}, /* gpmc_nadv_ale */ - {GPMC_NBE0_CLE, (PTU | M0)}, /* gpmc_nbe0_cle */ - {GPMC_NBE1, (PTU | M0)}, /* gpmc_nbe1 */ - {GPMC_WAIT0, (PTU | IEN | M0)}, /* gpmc_wait0 */ - {GPMC_WAIT1, (PTU | IEN | M0)}, /* gpio_62 - usbh_nreset */ - {GPMC_NOE, (PTU | M0)}, /* gpmc_noe */ - {GPMC_NWE, (PTU | M0)}, /* gpmc_nwe */ - {HDMI_HPD, (PTD | IEN | M3)}, /* gpio_63 - hdmi_hpd */ - {HDMI_CEC, (PTU | IEN | M0)}, /* hdmi_cec */ - {HDMI_DDC_SCL, (M0)}, /* hdmi_ddc_scl */ - {HDMI_DDC_SDA, (IEN | M0)}, /* hdmi_ddc_sda */ - {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */ - {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */ - {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */ - {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */ - {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */ - {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */ - {CSI21_DX3, (IEN | M0)}, /* csi21_dx3 */ - {CSI21_DY3, (IEN | M0)}, /* csi21_dy3 */ - {CSI21_DX4, (IEN | M0)}, /* csi21_dx4 */ - {CSI21_DY4, (IEN | M0)}, /* csi21_dy4 */ - {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */ - {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */ - {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */ - {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */ - {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ - {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ - {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ - {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ - {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ - {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ - {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ - {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ - {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ - {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ - {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ - {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ - {USBB1_HSIC_DATA, (PTU | IEN | M3)}, /* gpio_96 - usbh_cpen */ - {USBB1_HSIC_STROBE, (PTU | IEN | M3)}, /* gpio_97 - usbh_reset */ - {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ - {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ - {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ - {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */ - {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */ - {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */ - {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */ - {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */ - {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */ - {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */ - {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ - {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */ - {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ - {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */ - {UART2_RTS, (M0)}, /* uart2_rts */ - {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */ - {UART2_TX, (M0)}, /* uart2_tx */ - {HDQ_SIO, (M0)}, /* hdq-sio */ - {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ - {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ - {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */ - {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */ - {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs1 */ - {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_clk */ - {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */ - {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */ - {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */ - {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */ - {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */ - {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */ - {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */ - {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */ - {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */ - {UART4_RX, (IEN | PTU | M0)}, /* uart4_rx */ - {UART4_TX, (M0)}, /* uart4_tx */ - {USBB2_ULPITLL_CLK, (PTU | IEN | M3)}, /* gpio_157 - start_adc */ - {USBB2_ULPITLL_STP, (PTU | IEN | M3)}, /* gpio_158 - spi_nirq */ - {USBB2_ULPITLL_DIR, (PTU | IEN | M3)}, /* gpio_159 - bt_nreset */ - {USBB2_ULPITLL_NXT, (PTU | IEN | M3)}, /* gpio_160 - audio_pwron*/ - {USBB2_ULPITLL_DAT0, (PTU | IEN | M3)}, /* gpio_161 - bid_0 */ - {USBB2_ULPITLL_DAT1, (PTU | IEN | M3)}, /* gpio_162 - bid_1 */ - {USBB2_ULPITLL_DAT2, (PTU | IEN | M3)}, /* gpio_163 - bid_2 */ - {USBB2_ULPITLL_DAT3, (PTU | IEN | M3)}, /* gpio_164 - bid_3 */ - {USBB2_ULPITLL_DAT4, (PTU | IEN | M3)}, /* gpio_165 - bid_4 */ - {USBB2_ULPITLL_DAT5, (PTU | IEN | M3)}, /* gpio_166 - ts_irq*/ - {USBB2_ULPITLL_DAT6, (PTU | IEN | M3)}, /* gpio_167 - gps_pps */ - {USBB2_ULPITLL_DAT7, (PTU | IEN | M3)}, /* gpio_168 */ - {USBB2_HSIC_DATA, (PTU | IEN | M3)}, /* gpio_169 */ - {USBB2_HSIC_STROBE, (PTU | IEN | M3)}, /* gpio_170 */ - {UNIPRO_TX1, (PTU | IEN | M3)}, /* gpio_173 */ - {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ - {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ - {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ - {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ - {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */ - {SYS_BOOT0, (M0)}, /* sys_boot0 */ - {SYS_BOOT1, (M0)}, /* sys_boot1 */ - {SYS_BOOT2, (M0)}, /* sys_boot2 */ - {SYS_BOOT3, (M0)}, /* sys_boot3 */ - {SYS_BOOT4, (M0)}, /* sys_boot4 */ - {SYS_BOOT5, (M0)}, /* sys_boot5 */ - {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */ - {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */ - {DPM_EMU16, (PTU | IEN | M3)}, /* gpio_27 */ - {DPM_EMU17, (PTU | IEN | M3)}, /* gpio_28 */ - {DPM_EMU18, (PTU | IEN | M3)}, /* gpio_29 */ - {DPM_EMU19, (PTU | IEN | M3)}, /* gpio_30 */ -}; - -const struct pad_conf_entry wkup_padconf_array_non_essential[] = { - {PAD1_FREF_XTAL_IN, (M0)}, /* fref_xtal_in */ - {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ - {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ - {PAD0_FREF_CLK0_OUT, (M7)}, /* safe mode */ - {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */ - {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ - {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ - {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ - {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ - {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ - {PAD0_SYS_BOOT6, (M0)}, /* sys_boot6 */ - {PAD1_SYS_BOOT7, (M0)}, /* sys_boot7 */ -}; - - -#endif /* _DUOVERO_MUX_DATA_H_ */ diff --git a/configs/duovero_defconfig b/configs/duovero_defconfig deleted file mode 100644 index ab06ada613..0000000000 --- a/configs/duovero_defconfig +++ /dev/null @@ -1,42 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_OMAP44XX=y -CONFIG_TARGET_DUOVERO=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_SPL_I2C_SUPPORT is not set -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SYS_PROMPT="duovero # " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_CMD_EXT4_WRITE=y -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SPL_PARTITION_UUIDS=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_MMC_OMAP_HS=y -CONFIG_SMC911X=y -CONFIG_SMC911X_BASE=0x2C000000 -CONFIG_SMC911X_32_BIT=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_UDC=y -CONFIG_USB_OMAP3=y -CONFIG_USB_GADGET=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/duovero.h b/include/configs/duovero.h deleted file mode 100644 index dccb369991..0000000000 --- a/include/configs/duovero.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright: 2013 - * Gumstix, Inc - http://www.gumstix.com - * Maintainer: Ash Charles - * - * Configuration settings for the Gumstix DuoVero board. - * See omap4_common.h for OMAP4 common part - */ - -#ifndef __CONFIG_DUOVERO_H -#define __CONFIG_DUOVERO_H - -/* - * High Level Configuration Options - */ -#define CONFIG_DUOVERO -#define CONFIG_MACH_TYPE MACH_TYPE_DUOVERO - -#include - -#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS - -/* USB UHH support options */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 - -#define CONFIG_SYS_ENABLE_PADS_ALL - -/* GPIO */ - -/* ENV related config options */ - -#endif /* __CONFIG_DUOVERO_H */ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 1e316227aa..5e5490fede 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -107,8 +107,6 @@ "setenv fdtfile omap4-panda-a4.dtb; fi;" \ "if test $board_name = panda-es; then " \ "setenv fdtfile omap4-panda-es.dtb; fi;" \ - "if test $board_name = duovero; then " \ - "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ BOOTENV