From patchwork Wed May 27 16:46:33 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 1295 Return-Path: X-Original-To: linux-amarula@patchwork.amarulasolutions.com Delivered-To: linux-amarula@patchwork.amarulasolutions.com Received: from mail-pg1-f200.google.com (mail-pg1-f200.google.com [209.85.215.200]) by ganimede.amarulasolutions.com (Postfix) with ESMTPS id 77E513F066 for ; Wed, 27 May 2020 18:47:39 +0200 (CEST) Received: by mail-pg1-f200.google.com with SMTP id k15sf19791729pgt.21 for ; Wed, 27 May 2020 09:47:39 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1590598058; cv=pass; d=google.com; s=arc-20160816; b=DM9hilrhkz32zBvyw+LRboUJZ/R4GUO2vnp5/4mLf8xNDqXzVql5OJPfCpLqeT35VN O4+raD6hQ+risE6fvRxYYDpjoPTwAxlIdUS6TVANI+cYbbENlZC0Cz80LLOtIUMWWe3H cqG7bNfxL2aReTsg/gDFFui83AY5JpQKOemjOU73003xdoIyVrmfBC6GI3XRPMfglqtq kMJ0hT1eN3rfVZ51EUz9SQvWYd4gChIPX7m41THpwXr341jwB0jXioAW/oFGRaoLioAY Vy4sOhTpm534Fbh2Z40vnwANWv3SOPshJViOoRVwkPyfikMG9zZ6qVswpj0iHH2dgBjB gNwA== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-unsubscribe:list-archive:list-help:list-post:list-id :mailing-list:precedence:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=/1SJ1kGh2GcMGuz9dg7FQZpto2cNXS7W1BDE/d54ato=; b=IzfhmG59HyamrplE59BChSb6LWHg69tlN9VcjQEpcVZaR4AqTc7G3sNc++Xkh9YQ9J pU8X+cRbcGb92ChQcRKM3PkzkEl/5ZOSVq8oofpO89UefW12sYlIp3hAy5f90lpAp/mV 66H+OpI5SPVPWnmcpKhx7bjpKKfGk2K0gfHRhJkOn4YA5mYX4pVEOxEJXanuwMnhBFoU 2xPvjPcDr6UjG4IHMb8eDg1pkf/E9gVpkog9SN58oIrtAT2TZy9G64IzvAj4m4V3X2me vPSpCBWZe+pccuZPJUjvcXMJoKcr0yIk2AweyBiSqMCkL5wKSp0BpoYbdwd3ZLVnCbpS 2fnA== ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=WYDUEA6Z; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:x-original-sender:x-original-authentication-results :precedence:mailing-list:list-id:list-post:list-help:list-archive :list-unsubscribe; bh=/1SJ1kGh2GcMGuz9dg7FQZpto2cNXS7W1BDE/d54ato=; b=IDnhDlQ6Y0T+WBqqIHryTeiKwWPKQAtSkdUgOzQUaAJYSpwqkjvxyMmezmc9mLYJBb wPVM+H6JLBm6V0GlgwMS83ZF4aiDWGx4jMpponhY9sSwtRSolAvokFIyRbBiu1fUcDeO aTnWe+/4gQgCbQ7s1BMC5Ll5U69VkTT073b38= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:x-original-sender :x-original-authentication-results:precedence:mailing-list:list-id :x-spam-checked-in-group:list-post:list-help:list-archive :list-unsubscribe; bh=/1SJ1kGh2GcMGuz9dg7FQZpto2cNXS7W1BDE/d54ato=; b=g5H3s/98it5rFz938h0iXPyDfs1T0mqky245NZf9DKiUhuVKHctrk1CS9Ga+sIf/1V 5LF4oOR/PT2w0rqQKQauOxORiPyxGCUvx12CmlxbxsTS7rmrA9Rfj1qMdowvUypa+Pb2 5aiF4UnioLVrHnfrI0HHb0DoLxct4S2ILg5vqw0L+Ibgu91Z8c0DI9WvoOHfT6j6dUIm B8wi62ojNQjyfxhGkVt/61PZdGRDA0azPx/HYKuqt3ySut1Wqnv9ZFbeO/D4mReO5zJa +cwoPIIrwjKnWYDCrNkwclJPOxILkmmCVtARXSS2jxM/eAIv+tqadSdzw2RhU+OO7V0k RfwQ== X-Gm-Message-State: AOAM533o9Sc+ew6UALDB/UWUd+WKW0uun/kisxgH9i6GjBDUqecQT9Cy xk0vzV579ogVT33OlZUiDCDn0GX6 X-Google-Smtp-Source: ABdhPJx3tAx7SGX0VRaC4MeK7mlPlKINkqhR0yYUfuWwK67pst/LxAq0x2pC9mkgL2soRrCZ5R/uog== X-Received: by 2002:a17:90b:897:: with SMTP id bj23mr6149275pjb.82.1590598057934; Wed, 27 May 2020 09:47:37 -0700 (PDT) X-BeenThere: linux-amarula@amarulasolutions.com Received: by 2002:a63:28c7:: with SMTP id o190ls242291pgo.3.gmail; Wed, 27 May 2020 09:47:37 -0700 (PDT) X-Received: by 2002:a63:7353:: with SMTP id d19mr5046529pgn.239.1590598057174; Wed, 27 May 2020 09:47:37 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1590598057; cv=none; d=google.com; s=arc-20160816; b=ZH2EPQPPLO8MO51EQXl3NZCxx5UZ0z6cmz1n5YylHf3DVrLwsQigmH22VUTdwxzDCm 4lua8iO2DDdC9Iq+d2xz1Unr44WOGHuFy7IK1s2EeIrVVjsK1xxVIhb01AOiEgYg59r9 TUII2RHJM6lkl6OKGOXztr0cvoJfwwU3HaefTN6gpprEb5bRoUptULeO5IJFKOpNcuYG kFUx0AsH3XDUlG3iFTDh8PJrPaqgYqKPbHNDUd7jH6IpgdiatMjy9errL95LJmVkYOUf UTRVzw3XLtTl1c4lO0fjrTHuIim07XDX/Ib1fzdA/p4q16PaG2BnJLHoLOVawLo/KEFW S3lQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=0lUCIT+I4sr1Qz5a60OZ5I/wqTYXd2CC6qix3iIhOMk=; b=o7uR6jR50uRJSY5IsteBM54bpP5iFfNvsfobMWpOA0fB9oehsalFjJTuCp2V4Mh9Pp FGU9OLpw8F7kta3ywnxTZ2Uc+dU+jAslt6Su/AanRKfHslbIRHDcvhPgypRIyyZ0Txwu pAYdmKpDrKCuQCMeAnGx/WrMSjpk0kmJpUto1/MCqrtB3LaFaAkiEr9uv2cbY6tT2Smt cwejd0xi3cMckJEk8F9yLFG95YOs5nqkoncoPZsW4QcXo7WfXBZvcJ2r55/10nDJplir Jcsc43Bc4ADig0WH1bfZ/FrYbLP1uV0J04YPfnSArs+TxAuGfvh/0dqQcUGIUsk/AOoc V94A== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=WYDUEA6Z; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Received: from mail-sor-f65.google.com (mail-sor-f65.google.com. [209.85.220.65]) by mx.google.com with SMTPS id my14sor4274183pjb.1.2020.05.27.09.47.36 for (Google Transport Security); Wed, 27 May 2020 09:47:36 -0700 (PDT) Received-SPF: pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) client-ip=209.85.220.65; X-Received: by 2002:a17:90b:1098:: with SMTP id gj24mr5982374pjb.83.1590598055785; Wed, 27 May 2020 09:47:35 -0700 (PDT) Received: from localhost.localdomain ([2405:201:c809:c7d5:7cd8:74fb:6f94:70a5]) by smtp.gmail.com with ESMTPSA id b11sm2532017pfd.178.2020.05.27.09.47.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 May 2020 09:47:34 -0700 (PDT) From: Jagan Teki To: Simon Glass , Tom Rini Cc: u-boot@lists.denx.de, linux-amarula@amarulasolutions.com, Jagan Teki Subject: [PATCH 02/24] arm: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board Date: Wed, 27 May 2020 22:16:33 +0530 Message-Id: <20200527164655.177741-3-jagan@amarulasolutions.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200527164655.177741-1-jagan@amarulasolutions.com> References: <20200527164655.177741-1-jagan@amarulasolutions.com> MIME-Version: 1.0 X-Original-Sender: jagan@amarulasolutions.com X-Original-Authentication-Results: mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=WYDUEA6Z; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Content-Type: text/plain; charset="UTF-8" Precedence: list Mailing-list: list linux-amarula@amarulasolutions.com; contact linux-amarula+owners@amarulasolutions.com List-ID: X-Spam-Checked-In-Group: linux-amarula@amarulasolutions.com X-Google-Group-Id: 476853432473 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , This board has not been converted to CONFIG_DM_SPI by the deadline. Remove it. Patch-cc: Poonam Aggrwal Signed-off-by: Jagan Teki Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 1 - board/freescale/bsc9131rdb/Kconfig | 12 - board/freescale/bsc9131rdb/MAINTAINERS | 9 - board/freescale/bsc9131rdb/Makefile | 21 -- board/freescale/bsc9131rdb/README | 151 -------- board/freescale/bsc9131rdb/bsc9131rdb.c | 82 ----- board/freescale/bsc9131rdb/ddr.c | 170 --------- board/freescale/bsc9131rdb/law.c | 18 - board/freescale/bsc9131rdb/spl_minimal.c | 105 ------ board/freescale/bsc9131rdb/tlb.c | 61 ---- configs/BSC9131RDB_NAND_SYSCLK100_defconfig | 64 ---- configs/BSC9131RDB_NAND_defconfig | 63 ---- .../BSC9131RDB_SPIFLASH_SYSCLK100_defconfig | 56 --- configs/BSC9131RDB_SPIFLASH_defconfig | 56 --- include/configs/BSC9131RDB.h | 337 ------------------ 15 files changed, 1206 deletions(-) delete mode 100644 board/freescale/bsc9131rdb/Kconfig delete mode 100644 board/freescale/bsc9131rdb/MAINTAINERS delete mode 100644 board/freescale/bsc9131rdb/Makefile delete mode 100644 board/freescale/bsc9131rdb/README delete mode 100644 board/freescale/bsc9131rdb/bsc9131rdb.c delete mode 100644 board/freescale/bsc9131rdb/ddr.c delete mode 100644 board/freescale/bsc9131rdb/law.c delete mode 100644 board/freescale/bsc9131rdb/spl_minimal.c delete mode 100644 board/freescale/bsc9131rdb/tlb.c delete mode 100644 configs/BSC9131RDB_NAND_SYSCLK100_defconfig delete mode 100644 configs/BSC9131RDB_NAND_defconfig delete mode 100644 configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig delete mode 100644 configs/BSC9131RDB_SPIFLASH_defconfig delete mode 100644 include/configs/BSC9131RDB.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index dca83f4408..bb59943232 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1589,7 +1589,6 @@ config SYS_FSL_LBC_CLK_DIV Defines divider of platform clock(clock input to eLBC controller). -source "board/freescale/bsc9131rdb/Kconfig" source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" diff --git a/board/freescale/bsc9131rdb/Kconfig b/board/freescale/bsc9131rdb/Kconfig deleted file mode 100644 index dd9f765d7d..0000000000 --- a/board/freescale/bsc9131rdb/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_BSC9131RDB - -config SYS_BOARD - default "bsc9131rdb" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "BSC9131RDB" - -endif diff --git a/board/freescale/bsc9131rdb/MAINTAINERS b/board/freescale/bsc9131rdb/MAINTAINERS deleted file mode 100644 index 272d4ad3aa..0000000000 --- a/board/freescale/bsc9131rdb/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -BSC9131RDB BOARD -M: Poonam Aggrwal -S: Maintained -F: board/freescale/bsc9131rdb/ -F: include/configs/BSC9131RDB.h -F: configs/BSC9131RDB_NAND_defconfig -F: configs/BSC9131RDB_NAND_SYSCLK100_defconfig -F: configs/BSC9131RDB_SPIFLASH_defconfig -F: configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig diff --git a/board/freescale/bsc9131rdb/Makefile b/board/freescale/bsc9131rdb/Makefile deleted file mode 100644 index 063db4495e..0000000000 --- a/board/freescale/bsc9131rdb/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2011-2012 Freescale Semiconductor, Inc. - -MINIMAL= - -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_INIT_MINIMAL -MINIMAL=y -endif -endif - -ifdef MINIMAL -obj-y += spl_minimal.o -else -obj-y += bsc9131rdb.o -obj-y += ddr.o -endif - -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/bsc9131rdb/README b/board/freescale/bsc9131rdb/README deleted file mode 100644 index c8405970c1..0000000000 --- a/board/freescale/bsc9131rdb/README +++ /dev/null @@ -1,151 +0,0 @@ -Overview --------- -- BSC9131 is integrated device that targets Femto base station market. - It combines Power Architecture e500v2 and DSP StarCore SC3850 core - technologies with MAPLE-B2F baseband acceleration processing elements. -- It's MAPLE disabled personality is called 9231. - -The BSC9131 SoC includes the following function and features: -. Power Architecture subsystem including a e500 processor with 256-Kbyte shared - L2 cache -. StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache -. The Multi Accelerator Platform Engine for Femto BaseStation Baseband - Processing (MAPLE-B2F) -. A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, - Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, - and CRC algorithms -. Consists of accelerators for Convolution, Filtering, Turbo Encoding, - Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion - operations -. DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with - ECC, up to 400-MHz clock/800 MHz data rate -. Dedicated security engine featuring trusted boot -. DMA controller -. OCNDMA with four bidirectional channels -. Interfaces -. Two triple-speed Gigabit Ethernet controllers featuring network acceleration - including IEEE 1588. v2 hardware support and virtualization (eTSEC) -. eTSEC 1 supports RGMII/RMII -. eTSEC 2 supports RGMII -. High-speed USB 2.0 host and device controller with ULPI interface -. Enhanced secure digital (SD/MMC) host controller (eSDHC) -. Antenna interface controller (AIC), supporting three industry standard - JESD207/three custom ADI RF interfaces (two dual port and one single port) - and three MAXIM's MaxPHY serial interfaces -. ADI lanes support both full duplex FDD support and half duplex TDD support -. Universal Subscriber Identity Module (USIM) interface that facilitates - communication to SIM cards or Eurochip pre-paid phone cards -. TDM with one TDM port -. Two DUART, four eSPI, and two I2C controllers -. Integrated Flash memory controller (IFC) -. TDM with 256 channels -. GPIO -. Sixteen 32-bit timers - -The e500 core subsystem within the Power Architecture consists of the following: -. 32-Kbyte L1 instruction cache -. 32-Kbyte L1 data cache -. 256-Kbyte L2 cache/L2 memory/L2 stash -. programmable interrupt controller (PIC) -. Debug support -. Timers - -The SC3850 core subsystem consists of the following: -. 32 Kbyte 8-way level 1 instruction cache (L1 ICache) -. 32 Kbyte 8-way level 1 data cache (L1 DCache) -. 512 Kbyte 8-way level 2 unified instruction/data cache (M2 memory) -. Memory management unit (MMU) -. Enhanced programmable interrupt controller (EPIC) -. Debug and profiling unit (DPU) -. Two 32-bit timers - -BSC9131RDB board Overview -------------------------- - 1Gbyte DDR3 (on board DDR) - 128Mbyte 2K page size NAND Flash - 256 Kbit M24256 I2C EEPROM - 128 Mbit SPI Flash memory - USB-ULPI - eTSEC1: Connected to RGMII PHY - eTSEC2: Connected to RGMII PHY - DUART interface: supports one UARTs up to 115200 bps for console display - USIM connector - -Frequency Combinations Supported --------------------------------- -Core MHz/CCB MHz/DDR(MT/s) -1. 1000/500/800 -2. 800/400/667 - -Boot Methods Supported ------------------------ -1. NAND Flash -2. SPI Flash - -Default Boot Method --------------------- -NAND boot - -Building U-Boot --------------- -To build the U-Boot for BSC9131RDB: -1. NAND Flash with sysclk 66MHz(J16 on RDB closed, default) - make BSC9131RDB_NAND -2. NAND Flash with sysclk 100MHz(J16 on RDB open) - make BSC9131RDB_NAND_SYSCLK100 -3. SPI Flash with sysclk 66MHz(J16 on RDB closed, default) - make BSC9131RDB_SPIFLASH -4. SPI Flash with sysclk 100MHz(J16 on RDB open) - make BSC9131RDB_SPIFLASH_SYSCLK100 - -Memory map ------------ - 0x0000_0000 0x7FFF_FFFF DDR 1G cacheable - 0xA0000000 0xBFFFFFFF Shared DSP core L2/M2 space 512M - 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M - 0xC1F0_0000 0xC1F3_FFFF PA SRAM Region 0 256K - 0xC1F8_0000 0xC1F9_FFFF PA SRAM Region 1 128K - 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K - 0xFEE0_0000 0xFEE0_0FFF DSP Boot ROM 4K - 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M - 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M - 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND Buffer 8M - -DDR Memory map ---------------- - 0x0000_0000 0x36FF_FFFF Memory passed onto Linux - 0x3700_0000 0x37FF_FFFF PowerPC-DSP shared control area - 0x3800_0000 0x4FFF_FFFF DSP Private area - - Out of 880M, passed onto Linux, 1hugetlb page of 256M is reserved for - data communcation between PowerPC and DSP core. - Rest is PowerPC private area. - -Flashing Images ---------------- -To place a new U-Boot image in the NAND flash and then boot -with that new image temporarily, use this: - tftp 1000000 u-boot-nand.bin - nand erase 0 100000 - nand write 1000000 0 100000 - reset - -Using the Device Tree Source File ---------------------------------- -To create the DTB (Device Tree Binary) image file, -use a command similar to this: - - dtc -b 0 -f -I dts -O dtb bsc9131rdb.dts > bsc9131rdb.dtb - -Likely, that .dts file will come from here; - - linux-2.6/arch/powerpc/boot/dts/bsc9131rdb.dts - -Booting Linux -------------- -Place a linux uImage in the TFTP disk area. - - tftp 1000000 uImage - tftp 2000000 rootfs.ext2.gz.uboot - tftp c00000 bsc9131rdb.dtb - bootm 1000000 2000000 c00000 diff --git a/board/freescale/bsc9131rdb/bsc9131rdb.c b/board/freescale/bsc9131rdb/bsc9131rdb.c deleted file mode 100644 index 75c2aec75d..0000000000 --- a/board/freescale/bsc9131rdb/bsc9131rdb.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2011-2012 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_CTS_B0_GPIO42); - setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS); - - clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_RTS_B0_GPIO43); - setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_RTS_B0_DSP_TCK | - MPC85xx_PMUXCR2_UART_CTS_B1_SIM_PD); - setbits_be32(&gur->halt_req_mask, HALTED_TO_HALT_REQ_MASK_0); - clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_IFC_AD_GPIO_MASK | - MPC85xx_PMUXCR_IFC_AD17_GPO_MASK, - MPC85xx_PMUXCR_IFC_AD_GPIO | - MPC85xx_PMUXCR_IFC_AD17_GPO | MPC85xx_PMUXCR_SDHC_USIM); - - return 0; -} - -int checkboard(void) -{ - struct cpu_type *cpu; - - cpu = gd->arch.cpu; - printf("Board: %sRDB\n", cpu->name); - - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -#ifdef CONFIG_FDT_FIXUP_PARTITIONS -static const struct node_info nodes[] = { - { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, -}; -#endif -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); -#ifdef CONFIG_FDT_FIXUP_PARTITIONS - fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); -#endif - - fsl_fdt_fixup_dr_usb(blob, bd); - - return 0; -} -#endif diff --git a/board/freescale/bsc9131rdb/ddr.c b/board/freescale/bsc9131rdb/ddr.c deleted file mode 100644 index 0951d7758a..0000000000 --- a/board/freescale/bsc9131rdb/ddr.c +++ /dev/null @@ -1,170 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2011-2012 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef CONFIG_SYS_DDR_RAW_TIMING -#define CONFIG_SYS_DRAM_SIZE 1024 - -fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800, - .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800, - .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fixed_ddr_parm_t fixed_ddr_parm_0[] = { - {750, 850, &ddr_cfg_regs_800}, - {0, 0, NULL} -}; - -unsigned long get_sdram_size(void) -{ - return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DRAM_SIZE); -} - -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -phys_size_t fixed_sdram(void) -{ - int i; - char buf[32]; - fsl_ddr_cfg_regs_t ddr_cfg_regs; - phys_size_t ddr_size; - ulong ddr_freq, ddr_freq_mhz; - - ddr_freq = get_ddr_freq(0); - ddr_freq_mhz = ddr_freq / 1000000; - - printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, ddr_freq)); - - for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) { - if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) && - (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) { - memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings, - sizeof(ddr_cfg_regs)); - break; - } - } - - if (fixed_ddr_parm_0[i].max_freq == 0) { - panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, ddr_freq)); - } - - ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); - - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, - LAW_TRGT_IF_DDR_1) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - } - - return ddr_size; -} - -#else /* CONFIG_SYS_DDR_RAW_TIMING */ -/* Micron MT41J256M8HX-15E */ -dimm_params_t ddr_raw_timing = { - .n_ranks = 1, - .rank_density = 1073741824u, - .capacity = 1073741824u, - .primary_sdram_width = 32, - .ec_sdram_width = 0, - .registered_dimm = 0, - .mirrored_dimm = 0, - .n_row_addr = 15, - .n_col_addr = 10, - .n_banks_per_sdram_device = 8, - .edc_config = 0, - .burst_lengths_bitmask = 0x0c, - - .tckmin_x_ps = 1870, - .caslat_x = 0x1e << 4, /* 5,6,7,8 */ - .taa_ps = 13125, - .twr_ps = 15000, - .trcd_ps = 13125, - .trrd_ps = 7500, - .trp_ps = 13125, - .tras_ps = 37500, - .trc_ps = 50625, - .trfc_ps = 160000, - .twtr_ps = 7500, - .trtp_ps = 7500, - .refresh_rate_ps = 7800000, - .tfaw_ps = 37500, -}; - -int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, - unsigned int controller_number, - unsigned int dimm_number) -{ - const char dimm_model[] = "Fixed DDR on board"; - - if ((controller_number == 0) && (dimm_number == 0)) { - memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); - memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); - memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); - } - - return 0; -} - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - int i; - popts->clk_adjust = 6; - popts->cpo_override = 0x1f; - popts->write_data_delay = 2; - popts->half_strength_driver_enable = 1; - /* Write leveling override */ - popts->wrlvl_en = 1; - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xf; - popts->wrlvl_start = 0x8; - popts->trwt_override = 1; - popts->trwt = 0; - - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; - popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; - } -} - -#endif /* CONFIG_SYS_DDR_RAW_TIMING */ diff --git a/board/freescale/bsc9131rdb/law.c b/board/freescale/bsc9131rdb/law.c deleted file mode 100644 index ccfe4a2410..0000000000 --- a/board/freescale/bsc9131rdb/law.c +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2011-2012 Freescale Semiconductor, Inc. - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M, - LAW_TRGT_IF_DSP_CCSR), - SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_16M, - LAW_TRGT_IF_OCN_DSP), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/bsc9131rdb/spl_minimal.c b/board/freescale/bsc9131rdb/spl_minimal.c deleted file mode 100644 index 4ae9ba06c8..0000000000 --- a/board/freescale/bsc9131rdb/spl_minimal.c +++ /dev/null @@ -1,105 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -static void sdram_init(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - - __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); - __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); -#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 - __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds); - __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config); -#endif - __raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2); - - __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2); - - __raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl); - - __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl); - __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4); - __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5); - __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl); - - /* Set, but do not enable the memory */ - __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg); - - asm volatile("sync;isync"); - udelay(500); - - /* Let the controller go */ - out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); - - set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1); -} - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* initialize selected port with appropriate baud rate */ - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - gd->bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* Initialize the DDR3 */ - sdram_init(); - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -} diff --git a/board/freescale/bsc9131rdb/tlb.c b/board/freescale/bsc9131rdb/tlb.c deleted file mode 100644 index e1aacf0607..0000000000 --- a/board/freescale/bsc9131rdb/tlb.c +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2011-2012 Freescale Semiconductor, Inc. - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), -#ifdef CONFIG_SPL_NAND_BOOT - SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_4K, 1), -#endif - - /* *I*G* - CCSRBAR (PA) */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* CCSRBAR (DSP) */ - SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR, - CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1M, 1), - -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 8, BOOKE_PAGESZ_1G, 1), -#endif - - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1M, 1) - -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig b/configs/BSC9131RDB_NAND_SYSCLK100_defconfig deleted file mode 100644 index 64f6dadc22..0000000000 --- a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x00201000 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFFFFE000 -CONFIG_MPC85xx=y -CONFIG_TARGET_BSC9131RDB=y -CONFIG_SYS_CUSTOM_LDSCRIPT=y -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100" -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_BOOT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash," -CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)" -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_CAAM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -# CONFIG_PCI is not set -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y -CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/BSC9131RDB_NAND_defconfig b/configs/BSC9131RDB_NAND_defconfig deleted file mode 100644 index eda1ac428c..0000000000 --- a/configs/BSC9131RDB_NAND_defconfig +++ /dev/null @@ -1,63 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x00201000 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFFFFE000 -CONFIG_MPC85xx=y -CONFIG_TARGET_BSC9131RDB=y -CONFIG_SYS_CUSTOM_LDSCRIPT=y -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_BOOT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash," -CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)" -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_CAAM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -# CONFIG_PCI is not set -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y -CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig b/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig deleted file mode 100644 index 8ac33150f8..0000000000 --- a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MPC85xx=y -CONFIG_TARGET_BSC9131RDB=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100" -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash," -CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_CAAM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -# CONFIG_PCI is not set -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y -CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/BSC9131RDB_SPIFLASH_defconfig b/configs/BSC9131RDB_SPIFLASH_defconfig deleted file mode 100644 index 10d866661b..0000000000 --- a/configs/BSC9131RDB_SPIFLASH_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_MPC85xx=y -CONFIG_TARGET_BSC9131RDB=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_BOOTDELAY=10 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -# CONFIG_MISC_INIT_R is not set -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=ff800000.flash," -CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_CAAM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -# CONFIG_PCI is not set -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y -CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h deleted file mode 100644 index 879173f6f2..0000000000 --- a/include/configs/BSC9131RDB.h +++ /dev/null @@ -1,337 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2011-2012 Freescale Semiconductor, Inc. - */ - -/* - * BSC9131 RDB board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_NAND_FSL_IFC - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH -#define CONFIG_SYS_RAMBOOT -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc -#endif - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SPL_MAX_SIZE 8192 -#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 -#define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 -#endif - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -/* High Level Configuration Options */ - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on 9131 RDB */ -#if defined(CONFIG_SYS_CLK_100) -#define CONFIG_SYS_CLK_FREQ 100000000 /* SYSCLK for 9131 RDB */ -#else -#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for 9131 RDB */ -#endif - -#define CONFIG_HWCONFIG -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* enable branch predition */ - -/* DDR Setup */ -#undef CONFIG_SYS_DDR_RAW_TIMING -#undef CONFIG_DDR_SPD -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS 0x52 /* I2C access */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#ifndef __ASSEMBLY__ -extern unsigned long get_sdram_size(void); -#endif -#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 -#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 - -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 - -#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 -#define CONFIG_SYS_DDR_SR_CNTR 0x00000000 -#define CONFIG_SYS_DDR_RCW_1 0x00000000 -#define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ -#define CONFIG_SYS_DDR_CONTROL_2 0x24401000 -#define CONFIG_SYS_DDR_TIMING_4 0x00000001 -#define CONFIG_SYS_DDR_TIMING_5 0x02401400 - -#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 -#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 -#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 -#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cf -#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 -#define CONFIG_SYS_DDR_MODE_1_800 0x00441420 -#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 -#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100 -#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -/* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT - -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */ - /* CONFIG_SYS_IMMR */ -/* DSP CCSRBAR */ -#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT -#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT - -/* - * Memory map - * - * 0x0000_0000 0x3FFF_FFFF DDR 1G cacheable - * 0x8800_0000 0x8810_0000 IFC internal SRAM 1M - * 0xB000_0000 0xB0FF_FFFF DSP core M2 memory 16M - * 0xC100_0000 0xC13F_FFFF MAPLE-2F 4M - * 0xC1F0_0000 0xC1F3_FFFF PA L2 SRAM Region 0 256K - * 0xC1F8_0000 0xC1F9_FFFF PA L2 SRAM Region 1 128K - * 0xFED0_0000 0xFED0_3FFF SEC Secured RAM 16K - * 0xFF60_0000 0xFF6F_FFFF DSP CCSR 1M - * 0xFF70_0000 0xFF7F_FFFF PA CCSR 1M - * 0xFF80_0000 0xFFFF_FFFF Boot Page & NAND flash buffer 8M - * - */ - -/* - * IFC Definitions - */ - -/* NAND Flash on IFC */ -#define CONFIG_SYS_NAND_BASE 0xff800000 -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE - -#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 /* Port Size = 8 bit*/ \ - | CSPR_MSEL_NAND /* MSEL = NAND */ \ - | CSPR_V) -#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) - -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ - | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ - | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ - | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ - -/* NAND Flash Timing Params */ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ - | FTIM0_NAND_TWP(0x05) \ - | FTIM0_NAND_TWCHT(0x02) \ - | FTIM0_NAND_TWH(0x04)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1C) \ - | FTIM1_NAND_TWBE(0x1E) \ - | FTIM1_NAND_TRR(0x07) \ - | FTIM1_NAND_TRP(0x05)) -#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ - | FTIM2_NAND_TREH(0x04) \ - | FTIM2_NAND_TWHRE(0x11)) -#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -#define CONFIG_SYS_NAND_DDR_LAW 11 - -/* Set up IFC registers for boot location NAND */ -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 - -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000/* End of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ - -/* Serial Port */ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 - -/* I2C EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 - -/* eSPI - Enhanced SPI */ - -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 3 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 - -#define TSEC2_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#if defined(CONFIG_RAMBOOT_SPIFLASH) -#elif defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) -#endif - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_HAS_FSL_DR_USB -#endif - -/* - * Dynamic MTD Partition support with mtdparts - */ - -/* - * Environment Configuration - */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#endif - -#define CONFIG_HOSTNAME "BSC9131rdb" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uboot=" CONFIG_UBOOTPATH "\0" \ - "loadaddr=1000000\0" \ - "bootfile=uImage\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs.ext2.gz.uboot\0" \ - "fdtaddr=1e00000\0" \ - "fdtfile=bsc9131rdb.dtb\0" \ - "bdev=sda1\0" \ - "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ - "bootm_size=0x37000000\0" \ - "othbootargs=ramdisk_size=600000 " \ - "default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \ - "usbext2boot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start;" \ - "ext2load usb 0:4 $loadaddr $bootfile;" \ - "ext2load usb 0:4 $fdtaddr $fdtfile;" \ - "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND - -#endif /* __CONFIG_H */