From patchwork Wed May 27 16:46:40 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 1302 Return-Path: X-Original-To: linux-amarula@patchwork.amarulasolutions.com Delivered-To: linux-amarula@patchwork.amarulasolutions.com Received: from mail-pg1-f198.google.com (mail-pg1-f198.google.com [209.85.215.198]) by ganimede.amarulasolutions.com (Postfix) with ESMTPS id 622623F066 for ; Wed, 27 May 2020 18:49:25 +0200 (CEST) Received: by mail-pg1-f198.google.com with SMTP id v1sf19812662pgl.4 for ; Wed, 27 May 2020 09:49:25 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1590598164; cv=pass; d=google.com; s=arc-20160816; b=lyLhqhIB+kT3JASsFP2hnqre8XyC3qbV+0KZntbfxlDQpqgn3I+zWITT3UuP+jEqr3 O38wXnSOAmyderOejenxY6gETsKPSpGyaxu0bDts2w1D8jZZ+yWVGsQwoAmwf3tN9t02 s+rdfI0hLzx4LbJGhHlzW3kVo+99MwlGnoMZYxjTybvNf4eTOJv4lFw3VwbH9p/X69Um 0l1eFTUpuT3IOZELflsb3iHAR1wSrKgw0J3gChjOnL3x/RFYxEmNrY5k31qmE4icFj/d b6RxLMdVDhilbe3lZWq+PbtEsGiy/1l2ov8aftGV2nO5LqQj/yyQlCp2nKrxXlDJzOnB 6+nA== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-unsubscribe:list-archive:list-help:list-post:list-id :mailing-list:precedence:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=ZVJrCKfz61kNj0xEOimaARxXcAfMZegTpb6JNFGbHD4=; b=rc/YXORyEXOnfu985uMq00n7kB7eR/jIm/WozdGBKkQjAfcaO++Fj6kHw9ETutQ49E QEwCvACerjlLsy4VGlHsbKdwH4IHm0iYLi6L1hKeoZx1DUlW7ajCoGbmtDsPnms3CM32 rmwxja1QkGaoVCnr6MF0AgxjxGXDc4oLzhzB16TCheBOd8ipwtZxQGBpx86N01Rns3ST /2uomFLWjp3ZxLBDxA9tus+FFC7M/gh1nGf7ttc6VJ9UCEKTxr7ko5xhe0oWgWwNqMNe 9dhJDeYvH66Z4sXKikGnVy6XAX/7ag6u56edLekLjlkQ47HznQhSlVaKswKYbiQKEhRw 2TBg== ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=d6aXpmYs; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:x-original-sender:x-original-authentication-results :precedence:mailing-list:list-id:list-post:list-help:list-archive :list-unsubscribe; bh=ZVJrCKfz61kNj0xEOimaARxXcAfMZegTpb6JNFGbHD4=; b=rQN4gFqsfJ8EuMMt16JmRLDzo4EgGgP+RdjdXaGBKAG6gcTtG3adE1IJ5tLNihTc2k 2PqaCgSbzlYhxw044MlhJ6qYufQRiif25U1xouUhgpTwGViad4EBiuCmPD0dqfm7C0DT 7VFsbpeST8KQ82Ro8xYAEnHezLIRvaeSAubmQ= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:x-original-sender :x-original-authentication-results:precedence:mailing-list:list-id :x-spam-checked-in-group:list-post:list-help:list-archive :list-unsubscribe; bh=ZVJrCKfz61kNj0xEOimaARxXcAfMZegTpb6JNFGbHD4=; b=JL/dYzpR9DbxM8roGxaBtQcPyZ/eAtbeLsK43frHuDV9EJfm5n3zO6KPja6q9bPOIE SxiZudsNda2sgafPmz83t8UbdSR9LqvtcH0txb9hXAb7PliJ/L4Kc/h+6wfRPLmmt6kv 12L+mVJmdlelaZqEWZrMunBrv6qbCCC1wlZAwVxaOes07Im5i7ACSDX7BWdWgIdr7jat vfy3SYJzQ++hSHBemXh4zs2d8gfDk5ZlQAZGWvpGyGq4hglTcVUEFmHHV0s5/KZlvV52 xnmliV3UmYTupYNEqWgJ0ysiHD/W7SQQd37eQQv1xAj2QE0JWLURLcIfLJuu/E7LoCcv GryQ== X-Gm-Message-State: AOAM530uyFuMXZQIjzRpFcMPbHisvP3YD8U9CZJ1RldPHYjO2kvEXJyE 9I/4KEvd9lUila4djYyLRK9mh69b X-Google-Smtp-Source: ABdhPJyusz/ehdUDPMaza2PGgW7qQw28olrgS9D5ZncHA8Ol56eoDGiMaOFh2raLKXa4zT0ZdftaGA== X-Received: by 2002:a17:902:fe03:: with SMTP id g3mr7057446plj.323.1590598163925; Wed, 27 May 2020 09:49:23 -0700 (PDT) X-BeenThere: linux-amarula@amarulasolutions.com Received: by 2002:a17:90a:7604:: with SMTP id s4ls1736499pjk.1.gmail; Wed, 27 May 2020 09:49:23 -0700 (PDT) X-Received: by 2002:a17:902:8218:: with SMTP id x24mr896293pln.150.1590598163044; Wed, 27 May 2020 09:49:23 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1590598163; cv=none; d=google.com; s=arc-20160816; b=ebgbPmHv1DY+q3G7wkUGkdRcmQe42ujHAOEG8CFlDmpFpJVtdxYcGfysIhlE8WNbLS xOQRRP/lEX86qd4wBY2lbBgda/ynytZ3Ws4l5HpGmjFXYsPJF/ab6A89TPlk42Rmgalh AxlGQMiLO/6RfdCLik+LmX5G2mJfP0HIGuSsrkt52Vsu97Eo5+wkleKSJb2TqODYpKt/ KNIbNpl/ohMsPBNNzMCQU0DF5ThrPspeomuBYfVrnrXf5R5gUqjVoUVKzK21D+dAaJkF bKJTn8p2nFJcLwreUCYVfNKrcYiqmkOdwvNXyMqD4cD1HoxAVAkcWJh+KL4A47qydlwg Jj+Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=Pnyfve007qO0F5YhhtVfwWLZNFar3lVIaw0nZci047c=; b=rKzgpTGgKXlYdyIc2LngWTb5blrvmwa572fVQihOG/bbRcE/ZL0f3THikD1n4S8DfS cqOZ3URfE89L202SYLalupQG28usCLHNLj9/1FoqMh7s41DPP4luurrDzNefNi/E2BEe ysN+jfVu4AIsM4KsXI7ERhn+UFus9F8kV9qvnqVcOHEZn+y/MIHecWjPsX5C1ic1g1CJ 9306LW7yvsHnoELurakd7TjNb8aXPVNFIxhQRc7SNOH68nb3TJ41gMHQBrJEOAoMdO7o eaF0vemN3hcAF1N/Alo7E9SmATioh7QVzg2Uhe7USOcRtBJMUn0zvQLV2Wm/YzFUohpB SpmA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=d6aXpmYs; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Received: from mail-sor-f65.google.com (mail-sor-f65.google.com. [209.85.220.65]) by mx.google.com with SMTPS id c3sor4394164pjo.18.2020.05.27.09.49.23 for (Google Transport Security); Wed, 27 May 2020 09:49:23 -0700 (PDT) Received-SPF: pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) client-ip=209.85.220.65; X-Received: by 2002:a17:90a:738e:: with SMTP id j14mr5970276pjg.107.1590598161697; Wed, 27 May 2020 09:49:21 -0700 (PDT) Received: from localhost.localdomain ([2405:201:c809:c7d5:7cd8:74fb:6f94:70a5]) by smtp.gmail.com with ESMTPSA id b11sm2532017pfd.178.2020.05.27.09.49.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 May 2020 09:49:20 -0700 (PDT) From: Jagan Teki To: Simon Glass , Tom Rini Cc: u-boot@lists.denx.de, linux-amarula@amarulasolutions.com, Jagan Teki Subject: [PATCH 09/24] arm: Remove configs/P1022DS_36BIT_NAND_defconfig board Date: Wed, 27 May 2020 22:16:40 +0530 Message-Id: <20200527164655.177741-10-jagan@amarulasolutions.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200527164655.177741-1-jagan@amarulasolutions.com> References: <20200527164655.177741-1-jagan@amarulasolutions.com> MIME-Version: 1.0 X-Original-Sender: jagan@amarulasolutions.com X-Original-Authentication-Results: mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=d6aXpmYs; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Content-Type: text/plain; charset="UTF-8" Precedence: list Mailing-list: list linux-amarula@amarulasolutions.com; contact linux-amarula+owners@amarulasolutions.com List-ID: X-Spam-Checked-In-Group: linux-amarula@amarulasolutions.com X-Google-Group-Id: 476853432473 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , This board has not been converted to CONFIG_DM_SPI by the deadline. Remove it. Patch-cc: Timur Tabi Signed-off-by: Jagan Teki Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 1 - board/freescale/p1022ds/Kconfig | 12 - board/freescale/p1022ds/MAINTAINERS | 13 - board/freescale/p1022ds/Makefile | 25 - board/freescale/p1022ds/README | 23 - board/freescale/p1022ds/ddr.c | 106 ---- board/freescale/p1022ds/diu.c | 478 ------------------ board/freescale/p1022ds/law.c | 18 - board/freescale/p1022ds/p1022ds.c | 364 -------------- board/freescale/p1022ds/spl.c | 131 ----- board/freescale/p1022ds/spl_minimal.c | 71 --- board/freescale/p1022ds/tlb.c | 101 ---- configs/P1022DS_36BIT_NAND_defconfig | 80 --- configs/P1022DS_36BIT_SDCARD_defconfig | 74 --- configs/P1022DS_36BIT_SPIFLASH_defconfig | 76 --- configs/P1022DS_36BIT_defconfig | 62 --- configs/P1022DS_NAND_defconfig | 79 --- configs/P1022DS_SDCARD_defconfig | 73 --- configs/P1022DS_SPIFLASH_defconfig | 75 --- configs/P1022DS_defconfig | 61 --- include/configs/P1022DS.h | 593 ----------------------- 21 files changed, 2516 deletions(-) delete mode 100644 board/freescale/p1022ds/Kconfig delete mode 100644 board/freescale/p1022ds/MAINTAINERS delete mode 100644 board/freescale/p1022ds/Makefile delete mode 100644 board/freescale/p1022ds/README delete mode 100644 board/freescale/p1022ds/ddr.c delete mode 100644 board/freescale/p1022ds/diu.c delete mode 100644 board/freescale/p1022ds/law.c delete mode 100644 board/freescale/p1022ds/p1022ds.c delete mode 100644 board/freescale/p1022ds/spl.c delete mode 100644 board/freescale/p1022ds/spl_minimal.c delete mode 100644 board/freescale/p1022ds/tlb.c delete mode 100644 configs/P1022DS_36BIT_NAND_defconfig delete mode 100644 configs/P1022DS_36BIT_SDCARD_defconfig delete mode 100644 configs/P1022DS_36BIT_SPIFLASH_defconfig delete mode 100644 configs/P1022DS_36BIT_defconfig delete mode 100644 configs/P1022DS_NAND_defconfig delete mode 100644 configs/P1022DS_SDCARD_defconfig delete mode 100644 configs/P1022DS_SPIFLASH_defconfig delete mode 100644 configs/P1022DS_defconfig delete mode 100644 include/configs/P1022DS.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index dbb991319b..331adbf712 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1597,7 +1597,6 @@ source "board/freescale/mpc8555cds/Kconfig" source "board/freescale/mpc8568mds/Kconfig" source "board/freescale/mpc8569mds/Kconfig" source "board/freescale/mpc8572ds/Kconfig" -source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_twr/Kconfig" source "board/freescale/p2041rdb/Kconfig" diff --git a/board/freescale/p1022ds/Kconfig b/board/freescale/p1022ds/Kconfig deleted file mode 100644 index f1792de8e3..0000000000 --- a/board/freescale/p1022ds/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P1022DS - -config SYS_BOARD - default "p1022ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P1022DS" - -endif diff --git a/board/freescale/p1022ds/MAINTAINERS b/board/freescale/p1022ds/MAINTAINERS deleted file mode 100644 index 62256c3703..0000000000 --- a/board/freescale/p1022ds/MAINTAINERS +++ /dev/null @@ -1,13 +0,0 @@ -P1022DS BOARD -M: Timur Tabi -S: Maintained -F: board/freescale/p1022ds/ -F: include/configs/P1022DS.h -F: configs/P1022DS_defconfig -F: configs/P1022DS_36BIT_defconfig -F: configs/P1022DS_36BIT_NAND_defconfig -F: configs/P1022DS_36BIT_SDCARD_defconfig -F: configs/P1022DS_36BIT_SPIFLASH_defconfig -F: configs/P1022DS_NAND_defconfig -F: configs/P1022DS_SDCARD_defconfig -F: configs/P1022DS_SPIFLASH_defconfig diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile deleted file mode 100644 index 699e5b5288..0000000000 --- a/board/freescale/p1022ds/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2010 Freescale Semiconductor, Inc. - -MINIMAL= - -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_INIT_MINIMAL -MINIMAL=y -endif -endif - -ifdef MINIMAL -obj-y += spl_minimal.o -else -ifdef CONFIG_SPL_BUILD -obj-y += spl.o -endif -obj-y += p1022ds.o -obj-y += ddr.o -obj-$(CONFIG_FSL_DIU_FB) += diu.o -endif - -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/p1022ds/README b/board/freescale/p1022ds/README deleted file mode 100644 index 04d9197074..0000000000 --- a/board/freescale/p1022ds/README +++ /dev/null @@ -1,23 +0,0 @@ -Overview --------- -P1022ds is a Low End Dual core platform supporting the P1022 processor -of QorIQ series. P1022 is an e500 based dual core SOC. - - -Pin Multiplex(hwconfig setting) -------------------------------- -Add the environment 'usb2', 'audclk' and 'tdm' to support pin multiplex -via hwconfig, i.e: -'setenv hwconfig usb2' to enable USB2 and disable eTsec2 -'setenv hwconfig tdm' to enable TDM and disable Audio -'setenv hwconfig audclk:12' to enable Audio(codec clock sources is 12MHz) - and disable TDM -'setenv hwconfig 'usb2;tdm' to enable USB2 and TDM, disable eTsec2 and Audio -'setenv hwconfig 'usb2;audclk:11' to enable USB2 and Audio(codec clock sources - is 11MHz), disable eTsec2 and TDM - -Warning: TDM and AUDIO can not enable simultaneous ! -and AUDIO codec clock sources only setting as 11MHz or 12MHz ! -'setenv hwconfig 'audclk:12;tdm' --- error ! -'setenv hwconfig 'audclk:11;tdm' --- error ! -'setenv hwconfig 'audclk:10' --- error ! diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c deleted file mode 100644 index 70932115f4..0000000000 --- a/board/freescale/p1022ds/ddr.c +++ /dev/null @@ -1,106 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#include - -#include -#include - -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 clk_adjust; /* Range: 0-8 */ - u32 cpo; /* Range: 2-31 */ - u32 write_data_delay; /* Range: 0-6 */ - u32 force_2t; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -static const struct board_specific_parameters dimm0[] = { - /* - * memory controller 0 - * num| hi| clk| cpo|wrdata|2T - * ranks| mhz|adjst| | delay| - */ - {1, 549, 5, 31, 3, 0}, - {1, 850, 5, 31, 5, 0}, - {2, 549, 5, 31, 3, 0}, - {2, 850, 5, 31, 5, 0}, - {} -}; - -void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - unsigned long ddr_freq; - unsigned int i; - - - if (ctrl_num) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - /* set odt_rd_cfg and odt_wr_cfg. */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 1; - } - - pbsp = dimm0; - /* - * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->clk_adjust = pbsp->clk_adjust; - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - popts->twot_en = pbsp->force_2t; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found " - "for data rate %lu MT/s!\n" - "Trying to use the highest speed (%u) parameters\n", - ddr_freq, pbsp_highest->datarate_mhz_high); - popts->clk_adjust = pbsp->clk_adjust; - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = pbsp->write_data_delay; - popts->twot_en = pbsp->force_2t; - } else { - panic("DIMM is not supported by this board"); - } - -found: - popts->half_strength_driver_enable = 1; - - /* Per AN4039, enable ZQ calibration. */ - popts->zq_en = 1; - - /* - * For wake-up on ARP, we need auto self refresh enabled - */ - popts->auto_self_refresh_en = 1; - popts->sr_it = 0xb; -} diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c deleted file mode 100644 index 918b4b9f6a..0000000000 --- a/board/freescale/p1022ds/diu.c +++ /dev/null @@ -1,478 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * Authors: Timur Tabi - * - * FSL DIU Framebuffer driver - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "../common/ngpixis.h" -#include - -/* The CTL register is called 'csr' in the ngpixis_t structure */ -#define PX_CTL_ALTACC 0x80 - -#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0 -#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00 -#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0 -#define PX_BRDCFG0_ELBC_DIU 0x02 - -#define PX_BRDCFG1_DVIEN 0x80 -#define PX_BRDCFG1_DFPEN 0x40 -#define PX_BRDCFG1_BACKLIGHT 0x20 - -#define PMUXCR_ELBCDIU_MASK 0xc0000000 -#define PMUXCR_ELBCDIU_NOR16 0x80000000 -#define PMUXCR_ELBCDIU_DIU 0x40000000 - -/* - * DIU Area Descriptor - * - * Note that we need to byte-swap the value before it's written to the AD - * register. So even though the registers don't look like they're in the same - * bit positions as they are on the MPC8610, the same value is written to the - * AD register on the MPC8610 and on the P1022. - */ -#define AD_BYTE_F 0x10000000 -#define AD_ALPHA_C_SHIFT 25 -#define AD_BLUE_C_SHIFT 23 -#define AD_GREEN_C_SHIFT 21 -#define AD_RED_C_SHIFT 19 -#define AD_PIXEL_S_SHIFT 16 -#define AD_COMP_3_SHIFT 12 -#define AD_COMP_2_SHIFT 8 -#define AD_COMP_1_SHIFT 4 -#define AD_COMP_0_SHIFT 0 - -/* - * Variables used by the DIU/LBC switching code. It's safe to makes these - * global, because the DIU requires DDR, so we'll only run this code after - * relocation. - */ -static u8 px_brdcfg0; -static u32 pmuxcr; -static void *lbc_lcs0_ba; -static void *lbc_lcs1_ba; -static u32 old_br0, old_or0, old_br1, old_or1; -static u32 new_br0, new_or0, new_br1, new_or1; - -void diu_set_pixel_clock(unsigned int pixclock) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - unsigned long speed_ccb, temp; - u32 pixval; - - speed_ccb = get_bus_freq(0); - temp = 1000000000 / pixclock; - temp *= 1000; - pixval = speed_ccb / temp; - debug("DIU pixval = %u\n", pixval); - - /* Modify PXCLK in GUTS CLKDVDR */ - temp = in_be32(&gur->clkdvdr) & 0x2000FFFF; - out_be32(&gur->clkdvdr, temp); /* turn off clock */ - out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16)); -} - -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - const char *name; - u32 pixel_format; - u8 temp; - phys_addr_t phys0, phys1; /* BR0/BR1 physical addresses */ - - /* - * Indirect mode requires both BR0 and BR1 to be set to "GPCM", - * otherwise writes to these addresses won't actually appear on the - * local bus, and so the PIXIS won't see them. - * - * In FCM mode, writes go to the NAND controller, which does not pass - * them to the localbus directly. So we force BR0 and BR1 into GPCM - * mode, since we don't care about what's behind the localbus any - * more. However, we save those registers first, so that we can - * restore them when necessary. - */ - new_br0 = old_br0 = get_lbc_br(0); - new_br1 = old_br1 = get_lbc_br(1); - new_or0 = old_or0 = get_lbc_or(0); - new_or1 = old_or1 = get_lbc_or(1); - - /* - * Use the existing BRx/ORx values if it's already GPCM. Otherwise, - * force the values to simple 32KB GPCM windows with the most - * conservative timing. - */ - if ((old_br0 & BR_MSEL) != BR_MS_GPCM) { - new_br0 = (get_lbc_br(0) & BR_BA) | BR_V; - new_or0 = OR_AM_32KB | 0xFF7; - set_lbc_br(0, new_br0); - set_lbc_or(0, new_or0); - } - if ((old_br1 & BR_MSEL) != BR_MS_GPCM) { - new_br1 = (get_lbc_br(1) & BR_BA) | BR_V; - new_or1 = OR_AM_32KB | 0xFF7; - set_lbc_br(1, new_br1); - set_lbc_or(1, new_or1); - } - - /* - * Determine the physical addresses for Chip Selects 0 and 1. The - * BR0/BR1 registers contain the truncated physical addresses for the - * chip selects, mapped via the localbus LAW. Since the BRx registers - * only contain the lower 32 bits of the address, we have to determine - * the upper 4 bits some other way. The proper way is to scan the LAW - * table looking for a matching localbus address. Instead, we cheat. - * We know that the upper bits are 0 for 32-bit addressing, or 0xF for - * 36-bit addressing. - */ -#ifdef CONFIG_PHYS_64BIT - phys0 = 0xf00000000ULL | (old_br0 & old_or0 & BR_BA); - phys1 = 0xf00000000ULL | (old_br1 & old_or1 & BR_BA); -#else - phys0 = old_br0 & old_or0 & BR_BA; - phys1 = old_br1 & old_or1 & BR_BA; -#endif - - /* Save the LBC LCS0 and LCS1 addresses for the DIU mux functions */ - lbc_lcs0_ba = map_physmem(phys0, 1, 0); - lbc_lcs1_ba = map_physmem(phys1, 1, 0); - - pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) | - (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) | - (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) | - (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) | - (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT)); - - temp = in_8(&pixis->brdcfg1); - - if (strncmp(port, "lvds", 4) == 0) { - /* Single link LVDS */ - temp &= ~PX_BRDCFG1_DVIEN; - /* - * LVDS also needs backlight enabled, otherwise the display - * will be blank. - */ - temp |= (PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT); - name = "Single-Link LVDS"; - } else { /* DVI */ - /* Enable the DVI port, disable the DFP and the backlight */ - temp &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT); - temp |= PX_BRDCFG1_DVIEN; - name = "DVI"; - } - - printf("DIU: Switching to %s monitor @ %ux%u\n", name, xres, yres); - out_8(&pixis->brdcfg1, temp); - - /* - * Enable PIXIS indirect access mode. This is a hack that allows us to - * access PIXIS registers even when the LBC pins have been muxed to the - * DIU. - */ - setbits_8(&pixis->csr, PX_CTL_ALTACC); - - /* - * Route the LAD pins to the DIU. This will disable access to the eLBC, - * which means we won't be able to read/write any NOR flash addresses! - */ - out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0)); - px_brdcfg0 = in_8(lbc_lcs1_ba); - out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU); - in_8(lbc_lcs1_ba); - - /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */ - clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU); - pmuxcr = in_be32(&gur->pmuxcr); - - return fsl_diu_init(xres, yres, pixel_format, 0); -} - -/* - * set_mux_to_lbc - disable the DIU so that we can read/write to elbc - * - * On the Freescale P1022, the DIU video signal and the LBC address/data lines - * share the same pins, which means that when the DIU is active (e.g. the - * console is on the DVI display), NOR flash cannot be accessed. So we use the - * weak accessor feature of the CFI flash code to temporarily switch the pin - * mux from DIU to LBC whenever we want to read or write flash. This has a - * significant performance penalty, but it's the only way to make it work. - * - * There are two muxes: one on the chip, and one on the board. The chip mux - * controls whether the pins are used for the DIU or the LBC, and it is - * set via PMUXCR. The board mux controls whether those signals go to - * the video connector or the NOR flash chips, and it is set via the ngPIXIS. - */ -static int set_mux_to_lbc(void) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* Switch the muxes only if they're currently set to DIU mode */ - if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != - PMUXCR_ELBCDIU_NOR16) { - /* - * In DIU mode, the PIXIS can only be accessed indirectly - * since we can't read/write the LBC directly. - */ - /* Set the board mux to LBC. This will disable the display. */ - out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0)); - out_8(lbc_lcs1_ba, px_brdcfg0); - in_8(lbc_lcs1_ba); - - /* Disable indirect PIXIS mode */ - out_8(lbc_lcs0_ba, offsetof(ngpixis_t, csr)); - clrbits_8(lbc_lcs1_ba, PX_CTL_ALTACC); - - /* Set the chip mux to LBC mode, so that writes go to flash. */ - out_be32(&gur->pmuxcr, (pmuxcr & ~PMUXCR_ELBCDIU_MASK) | - PMUXCR_ELBCDIU_NOR16); - in_be32(&gur->pmuxcr); - - /* Restore the BR0 and BR1 settings */ - set_lbc_br(0, old_br0); - set_lbc_or(0, old_or0); - set_lbc_br(1, old_br1); - set_lbc_or(1, old_or1); - - return 1; - } - - return 0; -} - -/* - * set_mux_to_diu - re-enable the DIU muxing - * - * This function restores the chip and board muxing to point to the DIU. - */ -static void set_mux_to_diu(void) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* Set BR0 and BR1 to GPCM mode */ - set_lbc_br(0, new_br0); - set_lbc_or(0, new_or0); - set_lbc_br(1, new_br1); - set_lbc_or(1, new_or1); - - /* Enable indirect PIXIS mode */ - setbits_8(&pixis->csr, PX_CTL_ALTACC); - - /* Set the board mux to DIU. This will enable the display. */ - out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0)); - out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU); - in_8(lbc_lcs1_ba); - - /* Set the chip mux to DIU mode. */ - out_be32(&gur->pmuxcr, pmuxcr); - in_be32(&gur->pmuxcr); -} - -/* - * pixis_read - board-specific function to read from the PIXIS - * - * This function overrides the generic pixis_read() function, so that it can - * use PIXIS indirect mode if necessary. - */ -u8 pixis_read(unsigned int reg) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* Use indirect mode if the mux is currently set to DIU mode */ - if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != - PMUXCR_ELBCDIU_NOR16) { - out_8(lbc_lcs0_ba, reg); - return in_8(lbc_lcs1_ba); - } else { - void *p = (void *)PIXIS_BASE; - - return in_8(p + reg); - } -} - -/* - * pixis_write - board-specific function to write to the PIXIS - * - * This function overrides the generic pixis_write() function, so that it can - * use PIXIS indirect mode if necessary. - */ -void pixis_write(unsigned int reg, u8 value) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* Use indirect mode if the mux is currently set to DIU mode */ - if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != - PMUXCR_ELBCDIU_NOR16) { - out_8(lbc_lcs0_ba, reg); - out_8(lbc_lcs1_ba, value); - /* Do a read-back to ensure the write completed */ - in_8(lbc_lcs1_ba); - } else { - void *p = (void *)PIXIS_BASE; - - out_8(p + reg, value); - } -} - -void pixis_bank_reset(void) -{ - /* - * For some reason, a PIXIS bank reset does not work if the PIXIS is - * in indirect mode, so switch to direct mode first. - */ - set_mux_to_lbc(); - - out_8(&pixis->vctl, 0); - out_8(&pixis->vctl, 1); - - while (1); -} - -#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS - -void flash_write8(u8 value, void *addr) -{ - int sw = set_mux_to_lbc(); - - __raw_writeb(value, addr); - if (sw) { - /* - * To ensure the post-write is completed to eLBC, software must - * perform a dummy read from one valid address from eLBC space - * before changing the eLBC_DIU from NOR mode to DIU mode. - * set_mux_to_diu() includes a sync that will ensure the - * __raw_readb() completes before it switches the mux. - */ - __raw_readb(addr); - set_mux_to_diu(); - } -} - -void flash_write16(u16 value, void *addr) -{ - int sw = set_mux_to_lbc(); - - __raw_writew(value, addr); - if (sw) { - /* - * To ensure the post-write is completed to eLBC, software must - * perform a dummy read from one valid address from eLBC space - * before changing the eLBC_DIU from NOR mode to DIU mode. - * set_mux_to_diu() includes a sync that will ensure the - * __raw_readb() completes before it switches the mux. - */ - __raw_readb(addr); - set_mux_to_diu(); - } -} - -void flash_write32(u32 value, void *addr) -{ - int sw = set_mux_to_lbc(); - - __raw_writel(value, addr); - if (sw) { - /* - * To ensure the post-write is completed to eLBC, software must - * perform a dummy read from one valid address from eLBC space - * before changing the eLBC_DIU from NOR mode to DIU mode. - * set_mux_to_diu() includes a sync that will ensure the - * __raw_readb() completes before it switches the mux. - */ - __raw_readb(addr); - set_mux_to_diu(); - } -} - -void flash_write64(u64 value, void *addr) -{ - int sw = set_mux_to_lbc(); - uint32_t *p = addr; - - /* - * There is no __raw_writeq(), so do the write manually. We don't trust - * the compiler, so we use inline assembly. - */ - __asm__ __volatile__( - "stw%U0%X0 %2,%0;\n" - "stw%U1%X1 %3,%1;\n" - : "=m" (*p), "=m" (*(p + 1)) - : "r" ((uint32_t) (value >> 32)), "r" ((uint32_t) (value))); - - if (sw) { - /* - * To ensure the post-write is completed to eLBC, software must - * perform a dummy read from one valid address from eLBC space - * before changing the eLBC_DIU from NOR mode to DIU mode. We - * read addr+4 because we just wrote to addr+4, so that's how we - * maintain execution order. set_mux_to_diu() includes a sync - * that will ensure the __raw_readb() completes before it - * switches the mux. - */ - __raw_readb(addr + 4); - set_mux_to_diu(); - } -} - -u8 flash_read8(void *addr) -{ - u8 ret; - - int sw = set_mux_to_lbc(); - - ret = __raw_readb(addr); - if (sw) - set_mux_to_diu(); - - return ret; -} - -u16 flash_read16(void *addr) -{ - u16 ret; - - int sw = set_mux_to_lbc(); - - ret = __raw_readw(addr); - if (sw) - set_mux_to_diu(); - - return ret; -} - -u32 flash_read32(void *addr) -{ - u32 ret; - - int sw = set_mux_to_lbc(); - - ret = __raw_readl(addr); - if (sw) - set_mux_to_diu(); - - return ret; -} - -u64 flash_read64(void *addr) -{ - u64 ret; - - int sw = set_mux_to_lbc(); - - /* There is no __raw_readq(), so do the read manually */ - ret = *(volatile u64 *)addr; - if (sw) - set_mux_to_diu(); - - return ret; -} - -#endif diff --git a/board/freescale/p1022ds/law.c b/board/freescale/p1022ds/law.c deleted file mode 100644 index 079095d008..0000000000 --- a/board/freescale/p1022ds/law.c +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c deleted file mode 100644 index d10160d17a..0000000000 --- a/board/freescale/p1022ds/p1022ds.c +++ /dev/null @@ -1,364 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010-2012 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../common/ngpixis.h" - -int board_early_init_f(void) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* Set pmuxcr to allow both i2c1 and i2c2 */ - setbits_be32(&gur->pmuxcr, 0x1000); -#ifdef CONFIG_SYS_RAMBOOT - setbits_be32(&gur->pmuxcr, - in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); -#endif - - /* Read back the register to synchronize the write. */ - in_be32(&gur->pmuxcr); - - /* Set the pin muxing to enable ETSEC2. */ - clrbits_be32(&gur->pmuxcr2, 0x001F8000); - - /* Enable the SPI */ - clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); - - return 0; -} - -int checkboard(void) -{ - u8 sw; - - printf("Board: P1022DS Sys ID: 0x%02x, " - "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); - - sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); - - switch ((sw & PIXIS_LBMAP_MASK) >> 6) { - case 0: - printf ("vBank: %u\n", ((sw & 0x30) >> 4)); - break; - case 1: - printf ("NAND\n"); - break; - case 2: - case 3: - puts ("Promjet\n"); - break; - } - - return 0; -} - -#define CONFIG_TFP410_I2C_ADDR 0x38 - -/* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */ -#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK 0x0c -#define CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK 0x03 - -/* Route the I2C1 pins to the SSI port instead. */ -#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI 0x08 - -/* Choose the 12.288Mhz codec reference clock */ -#define CONFIG_PIXIS_BRDCFG1_AUDCLK_12 0x02 - -/* Choose the 11.2896Mhz codec reference clock */ -#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11 0x01 - -/* Connect to USB2 */ -#define CONFIG_PIXIS_BRDCFG0_USB2 0x10 -/* Connect to TFM bus */ -#define CONFIG_PIXIS_BRDCFG1_TDM 0x0c -/* Connect to SPI */ -#define CONFIG_PIXIS_BRDCFG0_SPI 0x80 - -int misc_init_r(void) -{ - u8 temp; - const char *audclk; - size_t arglen; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - /* For DVI, enable the TFP410 Encoder. */ - - temp = 0xBF; - if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0) - return -1; - if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0) - return -1; - debug("DVI Encoder Read: 0x%02x\n", temp); - - temp = 0x10; - if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0) - return -1; - if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0) - return -1; - debug("DVI Encoder Read: 0x%02x\n",temp); - - /* Enable the USB2 in PMUXCR2 and FGPA */ - if (hwconfig("usb2")) { - clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK, - MPC85xx_PMUXCR2_USB); - setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2); - } - - /* tdm and audio can not enable simultaneous*/ - if (hwconfig("tdm") && hwconfig("audclk")){ - printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n"); - return -1; - } - - /* Enable the TDM in PMUXCR and FGPA */ - if (hwconfig("tdm")) { - clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK, - MPC85xx_PMUXCR_TDM); - setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM); - /* TDM need some configration option by SPI */ - clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK, - MPC85xx_PMUXCR_SPI); - setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI); - } - - /* - * Enable the reference clock for the WM8776 codec, and route the MUX - * pins for SSI. The default is the 12.288 MHz clock - */ - - if (hwconfig("audclk")) { - temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK | - CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK); - temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI; - - audclk = hwconfig_arg("audclk", &arglen); - /* Check the first two chars only */ - if (audclk && (strncmp(audclk, "11", 2) == 0)) - temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11; - else - temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12; - setbits_8(&pixis->brdcfg1, temp); - } - - return 0; -} - -/* - * A list of PCI and SATA slots - */ -enum slot_id { - SLOT_PCIE1 = 1, - SLOT_PCIE2, - SLOT_PCIE3, - SLOT_PCIE4, - SLOT_PCIE5, - SLOT_SATA1, - SLOT_SATA2 -}; - -/* - * This array maps the slot identifiers to their names on the P1022DS board. - */ -static const char *slot_names[] = { - [SLOT_PCIE1] = "Slot 1", - [SLOT_PCIE2] = "Slot 2", - [SLOT_PCIE3] = "Slot 3", - [SLOT_PCIE4] = "Slot 4", - [SLOT_PCIE5] = "Mini-PCIe", - [SLOT_SATA1] = "SATA 1", - [SLOT_SATA2] = "SATA 2", -}; - -/* - * This array maps a given SERDES configuration and SERDES device to the PCI or - * SATA slot that it connects to. This mapping is hard-coded in the FPGA. - */ -static u8 serdes_dev_slot[][SATA2 + 1] = { - [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 }, - [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4, - [PCIE2] = SLOT_PCIE5 }, - [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, - [PCIE2] = SLOT_PCIE3, - [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2, - [PCIE2] = SLOT_PCIE3 }, - [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3, - [PCIE2] = SLOT_PCIE3, - [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x1c] = { [PCIE1] = SLOT_PCIE1, - [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 }, - [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 }, - [0x1f] = { [PCIE1] = SLOT_PCIE1 }, -}; - - -/* - * Returns the name of the slot to which the PCIe or SATA controller is - * connected - */ -const char *board_serdes_name(enum srds_prtcl device) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - u32 pordevsr = in_be32(&gur->pordevsr); - unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; - enum slot_id slot = serdes_dev_slot[srds_cfg][device]; - const char *name = slot_names[slot]; - - if (name) - return name; - else - return "Nothing"; -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + PROMJET region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - return 0; -} - -/* - * Initialize on-board and/or PCI Ethernet devices - * - * Returns: - * <0, error - * 0, no ethernet devices found - * >0, number of ethernet devices initialized - */ -int board_eth_init(bd_t *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[2]; - unsigned int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - num++; -#endif - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis); -} - -#ifdef CONFIG_OF_BOARD_SETUP -/** - * ft_codec_setup - fix up the clock-frequency property of the codec node - * - * Update the clock-frequency property based on the value of the 'audclk' - * hwconfig option. If audclk is not specified, then don't write anything - * to the device tree, because it means that the codec clock is disabled. - */ -static void ft_codec_setup(void *blob, const char *compatible) -{ - const char *audclk; - size_t arglen; - u32 freq; - - audclk = hwconfig_arg("audclk", &arglen); - if (audclk) { - if (strncmp(audclk, "11", 2) == 0) - freq = 11289600; - else - freq = 12288000; - - do_fixup_by_compat_u32(blob, compatible, "clock-frequency", - freq, 1); - } -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fsl_fdt_fixup_dr_usb(blob, bd); -#endif - - FT_FSL_PCI_SETUP; - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_fdt_fixup(blob); -#endif - - /* Update the WM8776 node's clock frequency property */ - ft_codec_setup(blob, "wlf,wm8776"); - - return 0; -} -#endif diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c deleted file mode 100644 index 39e1bee6f3..0000000000 --- a/board/freescale/p1022ds/spl.c +++ /dev/null @@ -1,131 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "../common/ngpixis.h" -#include -#include -#include "../common/spl.h" - -DECLARE_GLOBAL_DATA_PTR; - -static const u32 sysclk_tbl[] = { - 66666000, 7499900, 83332500, 8999900, - 99999000, 11111000, 12499800, 13333200 -}; - -phys_size_t get_effective_memsize(void) -{ - return CONFIG_SYS_L2_SIZE; -} - -void board_init_f(ulong bootflag) -{ - int px_spd; - u32 plat_ratio, sys_clk, bus_clk; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - console_init_f(); - - /* Set pmuxcr to allow both i2c1 and i2c2 */ - setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); - setbits_be32(&gur->pmuxcr, - in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); - -#ifdef CONFIG_SPL_SPI_BOOT - /* Enable the SPI */ - clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); -#endif - - /* Read back the register to synchronize the write. */ - in_be32(&gur->pmuxcr); - - /* initialize selected port with appropriate baud rate */ - px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); - sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - bus_clk = sys_clk * plat_ratio / 2; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); -#ifdef CONFIG_SPL_MMC_BOOT - puts("\nSD boot...\n"); -#elif defined(CONFIG_SPL_SPI_BOOT) - puts("\nSPI Flash boot...\n"); -#endif - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)CONFIG_SPL_GD_ADDR; - bd_t *bd; - - memset(gd, 0, sizeof(gd_t)); - bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); - memset(bd, 0, sizeof(bd_t)); - gd->bd = bd; - bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; - bd->bi_memsize = CONFIG_SYS_L2_SIZE; - - arch_cpu_init(); - get_clocks(); - mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, - CONFIG_SPL_RELOC_MALLOC_SIZE); - gd->flags |= GD_FLG_FULL_MALLOC_INIT; -#ifndef CONFIG_SPL_NAND_BOOT - env_init(); -#endif -#ifdef CONFIG_SPL_MMC_BOOT - mmc_initialize(bd); -#endif - /* relocate environment function pointers etc. */ -#ifdef CONFIG_SPL_NAND_BOOT - nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)SPL_ENV_ADDR); - - gd->env_addr = (ulong)(SPL_ENV_ADDR); - gd->env_valid = ENV_VALID; -#else - env_relocate(); -#endif - -#ifdef CONFIG_SYS_I2C - i2c_init_all(); -#else - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - - dram_init(); -#ifdef CONFIG_SPL_NAND_BOOT - puts("Tertiary program loader running in sram..."); -#else - puts("Second program loader running in sram...\n"); -#endif - -#ifdef CONFIG_SPL_MMC_BOOT - mmc_boot(); -#elif defined(CONFIG_SPL_SPI_BOOT) - fsl_spi_boot(); -#elif defined(CONFIG_SPL_NAND_BOOT) - nand_boot(); -#endif -} diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c deleted file mode 100644 index 31de26318d..0000000000 --- a/board/freescale/p1022ds/spl_minimal.c +++ /dev/null @@ -1,71 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include - - -const static u32 sysclk_tbl[] = { - 66666000, 7499900, 83332500, 8999900, - 99999000, 11111000, 12499800, 13333200 -}; - -void board_init_f(ulong bootflag) -{ - int px_spd; - u32 plat_ratio, sys_clk, bus_clk; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - -#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) - set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); - set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); -#endif - /* for FPGA */ - set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); - set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); - - /* initialize selected port with appropriate baud rate */ - px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); - sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - bus_clk = sys_clk * plat_ratio / 2; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, - CONFIG_SPL_RELOC_TEXT_BASE); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - puts("\nSecond program loader running in sram..."); - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -} diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c deleted file mode 100644 index 194fbd5afc..0000000000 --- a/board/freescale/p1022ds/tlb.c +++ /dev/null @@ -1,101 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - -#ifndef CONFIG_SPL_BUILD - /* W**G* - Flash/promjet, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), -#endif - - SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_4K, 1), - -#if defined(CONFIG_SYS_RAMBOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) - /* **** - eSDHC/eSPI/NAND boot */ - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 8, BOOKE_PAGESZ_1G, 1), - /* **** - eSDHC/eSPI/NAND boot - second 1GB of memory */ - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 9, BOOKE_PAGESZ_1G, 1), -#endif - -#ifdef CONFIG_SYS_NAND_BASE - /* *I*G - NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_16K, 1), -#endif - -#ifdef CONFIG_SYS_INIT_L2_ADDR - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, - 0, 11, BOOKE_PAGESZ_256K, 1) -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig deleted file mode 100644 index 2bfda3ed40..0000000000 --- a/configs/P1022DS_36BIT_NAND_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11001000 -CONFIG_ENV_SIZE=0x40000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFF800000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_PHYS_64BIT=y -CONFIG_SYS_CUSTOM_LDSCRIPT=y -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_BOOT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_TPL=y -CONFIG_TPL_ENV_SUPPORT=y -CONFIG_TPL_I2C_SUPPORT=y -CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_TPL_NAND_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/P1022DS_36BIT_SDCARD_defconfig b/configs/P1022DS_36BIT_SDCARD_defconfig deleted file mode 100644 index 9cc214088c..0000000000 --- a/configs/P1022DS_36BIT_SDCARD_defconfig +++ /dev/null @@ -1,74 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xf8f81000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_PHYS_64BIT=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_MMC_BOOT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/P1022DS_36BIT_SPIFLASH_defconfig b/configs/P1022DS_36BIT_SPIFLASH_defconfig deleted file mode 100644 index 80d3a88273..0000000000 --- a/configs/P1022DS_36BIT_SPIFLASH_defconfig +++ /dev/null @@ -1,76 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_TEXT_BASE=0xf8f81000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_PHYS_64BIT=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_SPI_BOOT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/P1022DS_36BIT_defconfig b/configs/P1022DS_36BIT_defconfig deleted file mode 100644 index 1048b53abb..0000000000 --- a/configs/P1022DS_36BIT_defconfig +++ /dev/null @@ -1,62 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_PHYS_64BIT=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig deleted file mode 100644 index 79754874b6..0000000000 --- a/configs/P1022DS_NAND_defconfig +++ /dev/null @@ -1,79 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11001000 -CONFIG_ENV_SIZE=0x40000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xFF800000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_SYS_CUSTOM_LDSCRIPT=y -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_NAND_BOOT=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_TPL=y -CONFIG_TPL_ENV_SUPPORT=y -CONFIG_TPL_I2C_SUPPORT=y -CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_TPL_NAND_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/P1022DS_SDCARD_defconfig b/configs/P1022DS_SDCARD_defconfig deleted file mode 100644 index 4e80b8844e..0000000000 --- a/configs/P1022DS_SDCARD_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0xf8f81000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_MMC_BOOT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/P1022DS_SPIFLASH_defconfig b/configs/P1022DS_SPIFLASH_defconfig deleted file mode 100644 index e55f05cf56..0000000000 --- a/configs/P1022DS_SPIFLASH_defconfig +++ /dev/null @@ -1,75 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0x11001000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_TEXT_BASE=0xf8f81000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_SPL_FRAMEWORK is not set -CONFIG_SPL_SPI_BOOT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/P1022DS_defconfig b/configs/P1022DS_defconfig deleted file mode 100644 index c611ce418d..0000000000 --- a/configs/P1022DS_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P1022DS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor" -CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)" -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHY_ATHEROS=y -CONFIG_PHY_BROADCOM=y -CONFIG_PHY_DAVICOM=y -CONFIG_PHY_LXT=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_SMSC=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_TSEC_ENET=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h deleted file mode 100644 index 2b761078bc..0000000000 --- a/include/configs/P1022DS.h +++ /dev/null @@ -1,593 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2010-2012 Freescale Semiconductor, Inc. - * Authors: Srikanth Srinivasan - * Timur Tabi - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -#include "../board/freescale/common/ics307_clk.h" - -#ifdef CONFIG_SDCARD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_SPI_FLASH_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif -#endif - -#define CONFIG_NAND_FSL_ELBC -#define CONFIG_SYS_NAND_MAX_ECCPOS 56 -#define CONFIG_SYS_NAND_MAX_OOBFREE 5 - -#ifdef CONFIG_MTD_RAW_NAND -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_MAX_SIZE 4096 -#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) -#endif -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_TPL_PAD_TO 0x20000 -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#endif - -/* High Level Configuration Options */ - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_PCIE3 /* PCIE controller 3 (ULI bridge) */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#define CONFIG_ENABLE_36BIT_PHYS - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() -#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE -#define CONFIG_BTB - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k - SPL code*/ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -/* DDR Setup */ -#define CONFIG_DDR_SPD -#define CONFIG_VERY_BIG_RAM - -#ifdef CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* I2C addresses of SPD EEPROMs */ -#define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 2048 -#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_TIMING_3 0x00010000 -#define CONFIG_SYS_DDR_TIMING_0 0x40110104 -#define CONFIG_SYS_DDR_TIMING_1 0x5c5bd746 -#define CONFIG_SYS_DDR_TIMING_2 0x0fa8d4ca -#define CONFIG_SYS_DDR_MODE_1 0x00441221 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x0a280100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x02800000 -#define CONFIG_SYS_DDR_CONTROL 0xc7000008 -#define CONFIG_SYS_DDR_CONTROL_2 0x24401041 -#define CONFIG_SYS_DDR_TIMING_4 0x00220001 -#define CONFIG_SYS_DDR_TIMING_5 0x02401400 -#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8675f608 - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable - * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable - * - * Localbus cacheable (TBD) - * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable - * - * Localbus non-cacheable - * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable - * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable - * 0xff80_0000 0xff80_7fff NAND 32K non-cacheable - * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_FLASH_BASE 0xe8000000 /* start of FLASH 128M */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_FLASH_BR_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7) - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#endif - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 1024 - -#ifndef CONFIG_SYS_MONITOR_BASE -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif -#endif - -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Nand Flash */ -#if defined(CONFIG_NAND_FSL_ELBC) -#define CONFIG_SYS_NAND_BASE 0xff800000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif - -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) -#define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2<