From patchwork Sat Jun 13 13:54:49 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 1385 Return-Path: X-Original-To: linux-amarula@patchwork.amarulasolutions.com Delivered-To: linux-amarula@patchwork.amarulasolutions.com Received: from mail-pg1-f199.google.com (mail-pg1-f199.google.com [209.85.215.199]) by ganimede.amarulasolutions.com (Postfix) with ESMTPS id 72F423F077 for ; Sat, 13 Jun 2020 15:55:42 +0200 (CEST) Received: by mail-pg1-f199.google.com with SMTP id k21sf8442868pgn.14 for ; Sat, 13 Jun 2020 06:55:42 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1592056541; cv=pass; d=google.com; s=arc-20160816; b=zSk42w3zhb7IJid61EWFf861Q87TBe8sTMkRdO/D3XyE07kambLtf0X8C8jnAr3XTA Vrqk/XX1YkkmfIq18FYCGgmgJfqK+43qTn1wYlux9MBLtId75SSa6euoUziY1FwBGOVt R9Olso+L8kmnhIvBDBLLsm4zLHtLrZoMsrfoSMbCXCun39pR337//vKwBvVra5yfYz7C Ecb2SwUFAysi6UcBxCcNig7BSqfG3ML3Y2XpA/FmoZbJBQXF2290s1Io1tnPcPKZW1B5 btNXcGQAhsd0vGOzD5wLmYHZfFEeaeAQYFAmJ9u36CUlXTfILvrvvaOT3zNg5yUumg4/ e7og== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-unsubscribe:list-archive:list-help:list-post:list-id :mailing-list:precedence:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=jwHm52T7eeabQxgRaApkNrA97cyC+iAuoJCYCS0MNgw=; b=t6Q39X4i9tKJ+wE8P2uxKGsd3NvxKN9ePZBMAephG6ejpK0EiMS5V3DkGPdvCrDHI/ pi6hE5TtzNr7oftb2JHdRQ6D9TM2hEtGcFk6hfqmF2X2+j63pOayNLM9nNf2plmwD/7f Coe4kLWlzl71NW61uVLcjuWZ8VC7nzONEaXFNJp40eMS0eDJe6k3f2oatbOWumcleNKX 7loVVnmz32KyPHsxQgkXLrjqU5mDGSpJGUVP4rX8vwv7fPe89ClOJrw1K1+CztX2oioD KG1TdOr4xgs/CFkBkzgNHryMOLb5WBPZ/Ay0QnAXuVTWR9GpmmCv9dCjKNAFtfN1qr5I iYBQ== ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=BxiHBjTh; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:x-original-sender:x-original-authentication-results :precedence:mailing-list:list-id:list-post:list-help:list-archive :list-unsubscribe; bh=jwHm52T7eeabQxgRaApkNrA97cyC+iAuoJCYCS0MNgw=; b=aDnXMGzf59HL5GdG/sK3Vnbb+eqWS9pyNmXHi8u9zGCBv+wc98kNVJd+b1Z27ncOl7 yPjN58amO1813Fdjayv4A7BpoJLx5xREGFPnfOwQ16fV8vH/PXWGtpksrZ4T5ejqhn+S z5IASjbEnq7qISqt2eehBlCSY7x/g8dh8TJSE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:x-original-sender :x-original-authentication-results:precedence:mailing-list:list-id :x-spam-checked-in-group:list-post:list-help:list-archive :list-unsubscribe; bh=jwHm52T7eeabQxgRaApkNrA97cyC+iAuoJCYCS0MNgw=; b=lLJdqAsjorUW6trQgKqMdkP4JJOLyafG50f+Q6u4KZsQymkjal+U9CXJDtbiAdegTA HbncEuqZRxR5hhsxc3J1IpRgETsYEJBPN6vxRWs0ORh5QTL+/QW1fAEbWaffwn6hps3T 1ieiHbmXncrKECCTFMFJV5r35ITlt3mLepbAfYP4WktWCwFUyYGSbZVapUrwMMZyA68u Hki647EkFqB9Uk/rmUsSwqZhU/esVny9dquhGeuywO+cmBgdwc0Cw4ptm/fXkoXTr6K5 6xbbSFAlxdGVm6ulfmQF/VT+x+SSxtP+ABuKQwK674FMNCrsdAmJQqQv1N6GWis51Tc6 2pGw== X-Gm-Message-State: AOAM5329lvYQO+8a3HenYrTO4PdPKs/xRiTXQUMOWo2eGdLlZeljBeQ3 9Am1EdENspbFp2AJxSUD8oCmulCg X-Google-Smtp-Source: ABdhPJxz1dTeA7jvGcTlgExPgJ2XGOIFJDD4oIfBvdT/aBQXsxhgdTCHiCD1Cb2GWDhGv4ZXBkJ2YA== X-Received: by 2002:a05:6a00:1589:: with SMTP id u9mr16640897pfk.201.1592056541137; Sat, 13 Jun 2020 06:55:41 -0700 (PDT) X-BeenThere: linux-amarula@amarulasolutions.com Received: by 2002:a17:90a:c70d:: with SMTP id o13ls3295283pjt.0.gmail; Sat, 13 Jun 2020 06:55:40 -0700 (PDT) X-Received: by 2002:a17:90a:ac0f:: with SMTP id o15mr3681811pjq.105.1592056540517; Sat, 13 Jun 2020 06:55:40 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592056540; cv=none; d=google.com; s=arc-20160816; b=ZgQj0d0lrniM4nnMd6vJg4FqPUyrwI/Sx0i0GsX+NlyvCIz54yzewoxc6CiNBSXBEP duG4ztwuloq0aN8o0DdE4G9ascbwC6/zcT+xOONXmfAYdiVdNSIybh2bE0lTQNIIpFug movEGSm7+OV6FpBUN9s7BeNzn2AD69u22OTwVpB8dEtBr9iDA4my+vuEriKg+3Mk82E0 IWnWLI2Wc+hYFxFc6GPlgc4doYBmji1TK0lyxvfIGLHbsgtrGtRroZ2BQSkiU23KGG2F UTXHYqKmVHJZJj+3Z+vWqFl0bFAOjKOkj8cWuVgS/EBGJbiJFPx+UHY925pf9MNTzgBB RX9Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:dkim-signature; bh=baJbz8Soogzv7MTQ/sjLIlbB2RtFtnp4oZg5eVbA9sQ=; b=YmW/taWsr8cVspw3InMefZixQ7Hnb4fR00P28B6z2+j3K0R26ezHBejRsJkQVGn+3K erhafWAE1HDtECAZa2NkSJItnXMLWaaZdT0pYnXraaEMGkzEpgTDHkjqM+FeCI9dgQ5/ DZ3txVgVTYDxWJQ8225PsoyIpmpXflZdTYc8buH14LJlvGMhsO2OTsVaXuToR2KRNhmv 4anW0TgRfoJ4sJ5RUpFd8hnfD7EX51usyUj0duFzUplqg5LiF1EoKDlMiPLE5uDCxi4t 69WEWWcyzi1G5x3Z35ZmDo7BK1Esi/xvh828LGN4S5pnnEYs9UJItKSWHlCd+GFQ5j5/ 8ScA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=BxiHBjTh; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Received: from mail-sor-f65.google.com (mail-sor-f65.google.com. [209.85.220.65]) by mx.google.com with SMTPS id y10sor11057608pga.9.2020.06.13.06.55.40 for (Google Transport Security); Sat, 13 Jun 2020 06:55:40 -0700 (PDT) Received-SPF: pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) client-ip=209.85.220.65; X-Received: by 2002:a65:6704:: with SMTP id u4mr14925903pgf.125.1592056539987; Sat, 13 Jun 2020 06:55:39 -0700 (PDT) Received: from localhost.localdomain ([2405:201:c809:c7d5:5482:aff0:70c0:2108]) by smtp.gmail.com with ESMTPSA id m18sm9087017pfo.173.2020.06.13.06.55.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 13 Jun 2020 06:55:39 -0700 (PDT) From: Jagan Teki To: u-boot@lists.denx.de Cc: Simon Glass , Tom Rini , linux-amarula@amarulasolutions.com, Jagan Teki Subject: [PATCH 10/16] arm: Remove zc5202/zc5601 board Date: Sat, 13 Jun 2020 19:24:49 +0530 Message-Id: <20200613135455.181483-11-jagan@amarulasolutions.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200613135455.181483-1-jagan@amarulasolutions.com> References: <20200613135455.181483-1-jagan@amarulasolutions.com> MIME-Version: 1.0 X-Original-Sender: jagan@amarulasolutions.com X-Original-Authentication-Results: mx.google.com; dkim=pass header.i=@amarulasolutions.com header.s=google header.b=BxiHBjTh; spf=pass (google.com: domain of jagan@amarulasolutions.com designates 209.85.220.65 as permitted sender) smtp.mailfrom=jagan@amarulasolutions.com Content-Type: text/plain; charset="UTF-8" Precedence: list Mailing-list: list linux-amarula@amarulasolutions.com; contact linux-amarula+owners@amarulasolutions.com List-ID: X-Spam-Checked-In-Group: linux-amarula@amarulasolutions.com X-Google-Group-Id: 476853432473 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Patch-cc: Stefano Babic Signed-off-by: Jagan Teki --- arch/arm/mach-imx/mx6/Kconfig | 17 - board/el/el6x/Kconfig | 25 -- board/el/el6x/MAINTAINERS | 8 - board/el/el6x/Makefile | 5 - board/el/el6x/el6x.c | 636 ---------------------------------- configs/zc5202_defconfig | 56 --- configs/zc5601_defconfig | 54 --- include/configs/zc5202.h | 27 -- include/configs/zc5601.h | 26 -- 9 files changed, 854 deletions(-) delete mode 100644 board/el/el6x/Kconfig delete mode 100644 board/el/el6x/MAINTAINERS delete mode 100644 board/el/el6x/Makefile delete mode 100644 board/el/el6x/el6x.c delete mode 100644 configs/zc5202_defconfig delete mode 100644 configs/zc5601_defconfig delete mode 100644 include/configs/zc5202.h delete mode 100644 include/configs/zc5601.h diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 40814b22ad..2ca78d22a8 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -631,22 +631,6 @@ config TARGET_XPRESS select SUPPORT_SPL imply CMD_DM -config TARGET_ZC5202 - bool "zc5202" - select BOARD_LATE_INIT - select DM - select DM_THERMAL - select SUPPORT_SPL - imply CMD_DM - -config TARGET_ZC5601 - bool "zc5601" - select BOARD_LATE_INIT - select DM - select DM_THERMAL - select SUPPORT_SPL - imply CMD_DM - config TARGET_BRPPT2 bool "brppt2" select BOARD_LATE_INIT @@ -683,7 +667,6 @@ source "board/ccv/xpress/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" source "board/dhelectronics/dh_imx6/Kconfig" -source "board/el/el6x/Kconfig" source "board/engicam/imx6q/Kconfig" source "board/engicam/imx6ul/Kconfig" source "board/freescale/mx6qarm2/Kconfig" diff --git a/board/el/el6x/Kconfig b/board/el/el6x/Kconfig deleted file mode 100644 index aa9bf25fb4..0000000000 --- a/board/el/el6x/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if TARGET_ZC5202 - -config SYS_BOARD - default "el6x" - -config SYS_VENDOR - default "el" - -config SYS_CONFIG_NAME - default "zc5202" - -endif - -if TARGET_ZC5601 - -config SYS_BOARD - default "el6x" - -config SYS_VENDOR - default "el" - -config SYS_CONFIG_NAME - default "zc5601" - -endif diff --git a/board/el/el6x/MAINTAINERS b/board/el/el6x/MAINTAINERS deleted file mode 100644 index 9a40010f50..0000000000 --- a/board/el/el6x/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -EL6X BOARD -M: Stefano Babic -S: Maintained -F: board/el/el6x/ -F: include/configs/zc5202.h -F: include/configs/zc5601.h -F: configs/zc5202_defconfig -F: configs/zc5601_defconfig diff --git a/board/el/el6x/Makefile b/board/el/el6x/Makefile deleted file mode 100644 index 065a867475..0000000000 --- a/board/el/el6x/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) Stefano Babic - -obj-y := el6x.o diff --git a/board/el/el6x/el6x.c b/board/el/el6x/el6x.c deleted file mode 100644 index d3e2981fa8..0000000000 --- a/board/el/el6x/el6x.c +++ /dev/null @@ -1,636 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) Stefano Babic - * - * Based on other i.MX6 boards - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define OPEN_PAD_CTRL (PAD_CTL_ODE | PAD_CTL_DSE_DISABLE | (0 << 12)) - -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ - PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) - -#define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) - -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) - -#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE | PAD_CTL_SRE_FAST) - -#define I2C_PMIC 1 - -#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) - -#define ETH_PHY_RESET IMX_GPIO_NR(2, 4) - -int dram_init(void) -{ - gd->ram_size = imx_ddr_size(); - - return 0; -} - -iomux_v3_cfg_t const uart2_pads[] = { - MX6_PAD_SD3_DAT5__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_SD3_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); -} - -#ifdef CONFIG_TARGET_ZC5202 -iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_GPIO_18__ENET_RX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_KEY_COL2__ENET_RX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_KEY_COL0__ENET_RX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK), - MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_GPIO_19__ENET_TX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_KEY_ROW2__ENET_TX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_KEY_ROW0__ENET_TX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), - /* Switch Reset */ - MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), - /* Switch Interrupt */ - MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL), - /* use CRS and COL pads as GPIOs */ - MX6_PAD_KEY_COL3__GPIO4_IO12 | MUX_PAD_CTRL(OPEN_PAD_CTRL), - MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(OPEN_PAD_CTRL), - -}; - -#define BOARD_NAME "EL6x-ZC5202" -#else -iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK), - MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; -#define BOARD_NAME "EL6x-ZC5601" -#endif - -static void setup_iomux_enet(void) -{ - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); - -#ifdef CONFIG_TARGET_ZC5202 - /* set CRS and COL to input */ - gpio_direction_input(IMX_GPIO_NR(4, 9)); - gpio_direction_input(IMX_GPIO_NR(4, 12)); - - /* Reset Switch */ - gpio_direction_output(ETH_PHY_RESET , 0); - mdelay(2); - gpio_set_value(ETH_PHY_RESET, 1); -#endif -} - -int board_phy_config(struct phy_device *phydev) -{ - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - -#ifdef CONFIG_MXC_SPI -#ifdef CONFIG_TARGET_ZC5202 -iomux_v3_cfg_t const ecspi1_pads[] = { - MX6_PAD_DISP0_DAT20__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT21__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT22__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_DISP0_DAT15__GPIO5_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -iomux_v3_cfg_t const ecspi3_pads[] = { - MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT7__GPIO4_IO28 | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT8__GPIO4_IO29 | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT9__GPIO4_IO30 | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_DISP0_DAT10__GPIO4_IO31 | MUX_PAD_CTRL(SPI_PAD_CTRL), -}; -#endif - -iomux_v3_cfg_t const ecspi4_pads[] = { - MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6_PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -int board_spi_cs_gpio(unsigned bus, unsigned cs) -{ - return (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS) - ? (IMX_GPIO_NR(3, 20)) : -1; -} - -static void setup_spi(void) -{ -#ifdef CONFIG_TARGET_ZC5202 - gpio_request(IMX_GPIO_NR(5, 17), "spi_cs0"); - gpio_request(IMX_GPIO_NR(5, 9), "spi_cs1"); - gpio_direction_output(IMX_GPIO_NR(5, 17), 1); - gpio_direction_output(IMX_GPIO_NR(5, 9), 1); - imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); -#endif - - gpio_request(IMX_GPIO_NR(3, 20), "spi4_cs0"); - gpio_direction_output(IMX_GPIO_NR(3, 20), 1); - imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads)); - - enable_spi_clk(true, 3); -} -#endif - -static struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | I2C_PAD, - .gp = IMX_GPIO_NR(2, 30) - }, - .sda = { - .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD, - .gp = IMX_GPIO_NR(4, 13) - } -}; - -static struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | I2C_PAD, - .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 | I2C_PAD, - .gp = IMX_GPIO_NR(1, 5) - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | I2C_PAD, - .gpio_mode = MX6_PAD_GPIO_16__GPIO7_IO11 | I2C_PAD, - .gp = IMX_GPIO_NR(7, 11) - } -}; - -iomux_v3_cfg_t const usdhc2_pads[] = { - MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_GPIO_4__SD2_CD_B | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ -}; - -iomux_v3_cfg_t const usdhc4_pads[] = { - MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - -#ifdef CONFIG_FSL_ESDHC_IMX -struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC2_BASE_ADDR}, - {USDHC4_BASE_ADDR}, -}; - -#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC2_BASE_ADDR: - ret = !gpio_get_value(USDHC2_CD_GPIO); - break; - case USDHC4_BASE_ADDR: - ret = 1; /* eMMC/uSDHC4 is always present */ - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ -#ifndef CONFIG_SPL_BUILD - int ret; - int i; - - /* - * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) - * mmc0 SD2 - * mmc1 SD3 - * mmc2 eMMC - */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - gpio_direction_input(USDHC2_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) then supported by the board (%d)\n", - i + 1, CONFIG_SYS_FSL_USDHC_NUM); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) - return ret; - } - - return 0; -#else - struct src *psrc = (struct src *)SRC_BASE_ADDR; - unsigned reg = readl(&psrc->sbmr1) >> 11; - - /* - * Upon reading BOOT_CFG register the following map is done: - * Bit 11 and 12 of BOOT_CFG register can determine the current - * mmc port - * 0x1 SD1 - * 0x2 SD2 - * 0x3 SD4 - */ - - switch (reg & 0x3) { - case 0x1: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - break; - case 0x3: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR; - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - break; - } - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -#endif - -} -#endif - - -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - -int board_eth_init(bd_t *bis) -{ - setup_iomux_enet(); - enable_enet_clk(1); - - return cpu_eth_init(bis); -} - -int board_early_init_f(void) -{ - - setup_iomux_uart(); - setup_spi(); - - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); - - return 0; -} - -int power_init_board(void) -{ - struct pmic *p; - int ret; - unsigned int reg; - - ret = power_pfuze100_init(I2C_PMIC); - if (ret) - return ret; - - p = pmic_get("PFUZE100"); - ret = pmic_probe(p); - if (ret) - return ret; - - pmic_reg_read(p, PFUZE100_DEVICEID, ®); - printf("PMIC: PFUZE100 ID=0x%02x\n", reg); - - /* Increase VGEN3 from 2.5 to 2.8V */ - pmic_reg_read(p, PFUZE100_VGEN3VOL, ®); - reg &= ~LDO_VOL_MASK; - reg |= LDOB_2_80V; - pmic_reg_write(p, PFUZE100_VGEN3VOL, reg); - - /* Increase VGEN5 from 2.8 to 3V */ - pmic_reg_read(p, PFUZE100_VGEN5VOL, ®); - reg &= ~LDO_VOL_MASK; - reg |= LDOB_3_00V; - pmic_reg_write(p, PFUZE100_VGEN5VOL, reg); - - /* Set SW1AB stanby volage to 0.975V */ - pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®); - reg &= ~SW1x_STBY_MASK; - reg |= SW1x_0_975V; - pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg); - - /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ - pmic_reg_read(p, PFUZE100_SW1ABCONF, ®); - reg &= ~SW1xCONF_DVSSPEED_MASK; - reg |= SW1xCONF_DVSSPEED_4US; - pmic_reg_write(p, PFUZE100_SW1ABCONF, reg); - - /* Set SW1C standby voltage to 0.975V */ - pmic_reg_read(p, PFUZE100_SW1CSTBY, ®); - reg &= ~SW1x_STBY_MASK; - reg |= SW1x_0_975V; - pmic_reg_write(p, PFUZE100_SW1CSTBY, reg); - - /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */ - pmic_reg_read(p, PFUZE100_SW1CCONF, ®); - reg &= ~SW1xCONF_DVSSPEED_MASK; - reg |= SW1xCONF_DVSSPEED_4US; - pmic_reg_write(p, PFUZE100_SW1CCONF, reg); - - return 0; -} - -#ifdef CONFIG_CMD_BMODE -static const struct boot_mode board_boot_modes[] = { - /* 4 bit bus width */ - {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, - /* 8 bit bus width */ - {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, - {NULL, 0}, -}; -#endif - -int board_late_init(void) -{ -#ifdef CONFIG_CMD_BMODE - add_board_boot_modes(board_boot_modes); -#endif - - env_set("board_name", BOARD_NAME); - return 0; -} - -int checkboard(void) -{ - puts("Board: "); - puts(BOARD_NAME "\n"); - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -#include -#include - -const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = { - .dram_sdclk_0 = 0x00020030, - .dram_sdclk_1 = 0x00020030, - .dram_cas = 0x00020030, - .dram_ras = 0x00020030, - .dram_reset = 0x00020030, - .dram_sdcke0 = 0x00003000, - .dram_sdcke1 = 0x00003000, - .dram_sdba2 = 0x00000000, - .dram_sdodt0 = 0x00003030, - .dram_sdodt1 = 0x00003030, - .dram_sdqs0 = 0x00000030, - .dram_sdqs1 = 0x00000030, - .dram_sdqs2 = 0x00000030, - .dram_sdqs3 = 0x00000030, - .dram_sdqs4 = 0x00000030, - .dram_sdqs5 = 0x00000030, - .dram_sdqs6 = 0x00000030, - .dram_sdqs7 = 0x00000030, - .dram_dqm0 = 0x00020030, - .dram_dqm1 = 0x00020030, - .dram_dqm2 = 0x00020030, - .dram_dqm3 = 0x00020030, - .dram_dqm4 = 0x00020030, - .dram_dqm5 = 0x00020030, - .dram_dqm6 = 0x00020030, - .dram_dqm7 = 0x00020030, -}; - -const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = { - .grp_ddr_type = 0x000C0000, - .grp_ddrmode_ctl = 0x00020000, - .grp_ddrpke = 0x00000000, - .grp_addds = 0x00000030, - .grp_ctlds = 0x00000030, - .grp_ddrmode = 0x00020000, - .grp_b0ds = 0x00000030, - .grp_b1ds = 0x00000030, - .grp_b2ds = 0x00000030, - .grp_b3ds = 0x00000030, - .grp_b4ds = 0x00000030, - .grp_b5ds = 0x00000030, - .grp_b6ds = 0x00000030, - .grp_b7ds = 0x00000030, -}; - -const struct mx6_mmdc_calibration mx6_mmcd_calib = { - .p0_mpwldectrl0 = 0x001F001F, - .p0_mpwldectrl1 = 0x001F001F, - .p1_mpwldectrl0 = 0x00440044, - .p1_mpwldectrl1 = 0x00440044, - .p0_mpdgctrl0 = 0x434B0350, - .p0_mpdgctrl1 = 0x034C0359, - .p1_mpdgctrl0 = 0x434B0350, - .p1_mpdgctrl1 = 0x03650348, - .p0_mprddlctl = 0x4436383B, - .p1_mprddlctl = 0x39393341, - .p0_mpwrdlctl = 0x35373933, - .p1_mpwrdlctl = 0x48254A36, -}; - -/* MT41K128M16JT-125 */ -static struct mx6_ddr3_cfg mem_ddr = { - .mem_speed = 1600, - .density = 2, - .width = 16, - .banks = 8, - .rowaddr = 14, - .coladdr = 10, - .pagesz = 2, - .trcd = 1375, - .trcmin = 4875, - .trasmin = 3500, -}; - -static void ccgr_init(void) -{ - struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - - writel(0x00C03F3F, &ccm->CCGR0); - writel(0x0030FC03, &ccm->CCGR1); - writel(0x0FFFC000, &ccm->CCGR2); - writel(0x3FF00000, &ccm->CCGR3); - writel(0x00FFF300, &ccm->CCGR4); - writel(0x0F0000C3, &ccm->CCGR5); - writel(0x000003FF, &ccm->CCGR6); -} - -/* - * This section requires the differentiation between iMX6 Sabre boards, but - * for now, it will configure only for the mx6q variant. - */ -static void spl_dram_init(void) -{ - struct mx6_ddr_sysinfo sysinfo = { - /* width of data bus:0=16,1=32,2=64 */ - .dsize = 2, - /* config for full 4GB range so that get_mem_size() works */ - .cs_density = 32, /* 32Gb per CS */ - /* single chip select */ - .ncs = 1, - .cs1_mirror = 0, - .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */ - .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */ - .walat = 1, /* Write additional latency */ - .ralat = 5, /* Read additional latency */ - .mif3_mode = 3, /* Command prediction working mode */ - .bi_on = 1, /* Bank interleaving enabled */ - .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ - .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ - .ddr_type = DDR_TYPE_DDR3, - .refsel = 1, /* Refresh cycles at 32KHz */ - .refr = 7, /* 8 refresh commands per refresh cycle */ - }; - - mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs); - mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr); -} - -void board_init_f(ulong dummy) -{ - /* setup AIPS and disable watchdog */ - arch_cpu_init(); - - ccgr_init(); - gpr_init(); - - /* iomux and setup of i2c */ - board_early_init_f(); - - /* setup GP timer */ - timer_init(); - - /* UART clocks enabled and gd valid - init serial console */ - preloader_console_init(); - - /* DDR initialization */ - spl_dram_init(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - /* load/boot image from boot device */ - board_init_r(NULL, 0); -} - -#endif diff --git a/configs/zc5202_defconfig b/configs/zc5202_defconfig deleted file mode 100644 index 4c298cb4da..0000000000 --- a/configs/zc5202_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 -CONFIG_TARGET_ZC5202=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SPL=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_TEXT_BASE=0x00908000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" -CONFIG_BOOTDELAY=3 -CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" -CONFIG_DEFAULT_FDT_FILE="imx6q-zc5202.dtb" -CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_SPI_LOAD=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x10000000 -CONFIG_SYS_MEMTEST_END=0x10800000 -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SF=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_FSL_USDHC=y -CONFIG_MTD=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_BUS=3 -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MV88E6352_SWITCH=y -CONFIG_MII=y -CONFIG_PCI=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_OF_LIBFDT=y diff --git a/configs/zc5601_defconfig b/configs/zc5601_defconfig deleted file mode 100644 index e8f4736541..0000000000 --- a/configs/zc5601_defconfig +++ /dev/null @@ -1,54 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x17800000 -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x0 -CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 -CONFIG_TARGET_ZC5601=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SPL=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI_SUPPORT=y -CONFIG_SPL_TEXT_BASE=0x00908000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" -CONFIG_BOOTDELAY=3 -CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" -CONFIG_DEFAULT_FDT_FILE="imx6q-zc5601.dtb" -CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_SPI_LOAD=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_CMD_MEMTEST=y -CONFIG_SYS_MEMTEST_START=0x10000000 -CONFIG_SYS_MEMTEST_END=0x10800000 -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_FSL_USDHC=y -CONFIG_MTD=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_BUS=3 -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/zc5202.h b/include/configs/zc5202.h deleted file mode 100644 index 7246b9eb65..0000000000 --- a/include/configs/zc5202.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) Stefano Babic - * - * Configuration settings for the E+L i.MX6Q DO82 board. - */ - -#ifndef __EL_ZC5202_H -#define __EL_ZC5202_H - -#define CONFIG_MXC_UART_BASE UART2_BASE -#define CONSOLE_DEV "ttymxc1" -#define CONFIG_MMCROOT "/dev/mmcblk0p2" - -#include "el6x_common.h" - -/* Ethernet */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE MII100 -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0 - -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_PCIE_IMX - -#endif /*__EL6Q_CONFIG_H */ diff --git a/include/configs/zc5601.h b/include/configs/zc5601.h deleted file mode 100644 index e4fe7a462d..0000000000 --- a/include/configs/zc5601.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) Stefano Babic - * - * Configuration settings for the E+L i.MX6Q DO82 board. - */ - -#ifndef __EL_ZC5601_H -#define __EL_ZC5601_H - - -#define CONFIG_MXC_UART_BASE UART2_BASE -#define CONSOLE_DEV "ttymxc1" -#define CONFIG_MMCROOT "/dev/mmcblk0p1" - -#include "el6x_common.h" - -/* Ethernet */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0x10 -#define CONFIG_FEC_FIXED_SPEED 1000 /* No autoneg, fix Gb */ - -#endif /*__EL6Q_CONFIG_H */