[v5,2/6] sifive: fu540: Add Booting from SPI
diff mbox series

Message ID 20200715100903.161363-3-jagan@amarulasolutions.com
State New
Headers show
Series
  • riscv: sifive/fu540: SPI boot
Related show

Commit Message

Jagan Teki July 15, 2020, 10:08 a.m. UTC 
Add booting from SPI for SiFive Unleashed board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
---
Changes for v5:
- rebase on master

 .../dts/hifive-unleashed-a00-u-boot.dtsi      | 12 ++++++
 configs/sifive_fu540_defconfig                |  4 ++
 doc/board/sifive/fu540.rst                    | 41 +++++++++++++++++++
 3 files changed, 57 insertions(+)

Patch
diff mbox series 

diff --git a/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
index e037150520..7d838bf9de 100644
--- a/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
+++ b/arch/riscv/dts/hifive-unleashed-a00-u-boot.dtsi
@@ -16,6 +16,10 @@ 
 		spi2 = &qspi2;
 	};
 
+	config {
+		u-boot,spl-payload-offset = <0x105000>; /* loader2 @1044KB */
+	};
+
 	hfclk {
 		u-boot,dm-spl;
 	};
@@ -26,6 +30,14 @@ 
 
 };
 
+&qspi0 {
+	u-boot,dm-spl;
+
+	flash@0 {
+		u-boot,dm-spl;
+	};
+};
+
 &qspi2 {
 	mmc@0 {
 		u-boot,dm-spl;
diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig
index 9e00a56ce6..06e17860c6 100644
--- a/configs/sifive_fu540_defconfig
+++ b/configs/sifive_fu540_defconfig
@@ -6,6 +6,7 @@  CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_TARGET_SIFIVE_FU540=y
 CONFIG_ARCH_RV64I=y
@@ -16,8 +17,11 @@  CONFIG_MISC_INIT_R=y
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
 CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_CLK=y
 CONFIG_DM_MTD=y
diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst
index 739eefa669..1ce9ab14f5 100644
--- a/doc/board/sifive/fu540.rst
+++ b/doc/board/sifive/fu540.rst
@@ -533,3 +533,44 @@  Sample boot log from HiFive Unleashed board
 	type:   0fc63daf-8483-4772-8e79-3d69d8477de4
 	type:   linux
 	guid:   9faa81b6-39b1-4418-af5e-89c48f29c20d
+
+Booting from SPI
+----------------
+
+Use Building steps from "Booting from MMC using U-Boot SPL" section.
+
+Partition the SPI in Linux via mtdblock. (Require to boot the board in
+SD boot mode by enabling MTD block in Linux)
+
+Use prebuilt image from here [1], which support to partition the SPI flash.
+
+.. code-block:: none
+
+  # sgdisk --clear \
+  > --set-alignment=2 \
+  > --new=1:40:2087 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \
+  > --new=2:2088:10279 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \
+  > --new=3:10536:65494 --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \
+  > /dev/mtdblock0
+
+Program the SPI (Require to boot the board in SD boot mode)
+
+Execute below steps on U-Boot proper,
+
+.. code-block:: none
+
+  tftpboot $kernel_addr_r u-boot-spl.bin
+  sf erase 0x5000 $filesize
+  sf write $kernel_addr_r 0x5000 $filesize
+
+  tftpboot $kernel_addr_r u-boot.itb
+  sf erase 0x105000 $filesize
+  sf write $kernel_addr_r 0x105000 $filesize
+
+Power off the board
+
+Change DIP switches MSEL[3:0] are set to 0110
+
+Power up the board.
+
+[1] https://github.com/amarula/bsp-sifive