@@ -258,4 +258,46 @@
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
};
};
+
+ vbus_host {
+ usb1_en_oc: usb1-en-oc {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vbus_typec {
+ usb0_en_oc: usb0-en-oc {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&vbus_host {
+ enable-active-high;
+ gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+};
+
+&vbus_typec {
+ enable-active-high;
+ gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
};
@@ -304,6 +304,18 @@
rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
};
};
+
+ vbus_host {
+ usb1_en_oc: usb1-en-oc {
+ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vbus_typec {
+ usb0_en_oc: usb0-en-oc {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
};
&pmu_io_domains {
@@ -324,8 +336,74 @@
max-frequency = <150000000>;
};
+&tcphy0 {
+ status = "okay";
+};
+
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <1>;
status = "okay";
};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vbus_typec>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vbus_host>;
+ status = "okay";
+ };
+};
+
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_host: host-port {
+ phy-supply = <&vbus_host>;
+ status = "okay";
+ };
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&vbus_host {
+ enable-active-high;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_en_oc>;
+};
@@ -33,6 +33,24 @@
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
+
+ vbus_host: vbus-host {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_en_oc>;
+ regulator-name = "vbus_host"; /* HOST-5V */
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vbus_typec: vbus-typec {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_en_oc>;
+ regulator-name = "vbus_typec";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
};
&gmac {
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0 ports. This patch adds support to enable all these USB ports for N10 and N8 combinations SBCs. Note that the USB 3.0 port on RockPI N8 combination works as USB 2.0 OTG since it is driven from RK3288. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/dts/rk3288-vmarc-som.dtsi | 42 ++++++++++ arch/arm/dts/rk3399pro-vmarc-som.dtsi | 78 +++++++++++++++++++ .../dts/rockchip-radxa-dalang-carrier.dtsi | 18 +++++ 3 files changed, 138 insertions(+)