[v6,4/5] rockchip: Separate the reset cause from display cpuinfo
diff mbox series

Message ID 20200721150604.35410-5-jagan@amarulasolutions.com
State New
Headers show
Series
  • rockchip: roc-rk3399-pc: Custom SPL
Related show

Commit Message

Jagan Teki July 21, 2020, 3:06 p.m. UTC 
reset cause is a generic functionality based on the soc
cru registers in rockchip. This can be used for printing
the cause of reset in cpuinfo or some other place where
reset cause is needed. 

Other than cpuinfo, reset cause can also be using during
bootcount for checking the specific reset cause and glow
the led based on the reset cause.

So, let's separate the reset cause code from cpuinfo, and
add a check to build it for rk3399, rk3288 since these two
soc are supporting reset cause as of now.

Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
---
Changes for v6:
- collect Kever r-b

 arch/arm/include/asm/arch-rockchip/cru.h |  2 ++
 arch/arm/mach-rockchip/Makefile          |  5 ++++-
 arch/arm/mach-rockchip/cpu-info.c        | 20 ++++++++++++--------
 3 files changed, 18 insertions(+), 9 deletions(-)

Patch
diff mbox series 

diff --git a/arch/arm/include/asm/arch-rockchip/cru.h b/arch/arm/include/asm/arch-rockchip/cru.h
index d2057cb738..13ea4aba8e 100644
--- a/arch/arm/include/asm/arch-rockchip/cru.h
+++ b/arch/arm/include/asm/arch-rockchip/cru.h
@@ -30,4 +30,6 @@  enum {
 
 #define MHz		1000000
 
+char *get_reset_cause(void);
+
 #endif /* _ROCKCHIP_CLOCK_H */
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 5b38526fe0..121f23a563 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -22,11 +22,14 @@  ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 # we can have the preprocessor correctly recognise both 0x0 and 0
 # meaning "turn it off".
 obj-y += boot_mode.o
-obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
 obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
 obj-$(CONFIG_MISC_INIT_R) += misc.o
 endif
 
+ifeq ($(CONFIG_TPL_BUILD),)
+obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
+endif
+
 obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
 
 obj-$(CONFIG_ROCKCHIP_PX30) += px30/
diff --git a/arch/arm/mach-rockchip/cpu-info.c b/arch/arm/mach-rockchip/cpu-info.c
index bb5a198039..d0f030109f 100644
--- a/arch/arm/mach-rockchip/cpu-info.c
+++ b/arch/arm/mach-rockchip/cpu-info.c
@@ -13,7 +13,7 @@ 
 #include <asm/arch-rockchip/hardware.h>
 #include <linux/err.h>
 
-static char *get_reset_cause(void)
+char *get_reset_cause(void)
 {
 	struct rockchip_cru *cru = rockchip_get_cru();
 	char *cause = NULL;
@@ -41,21 +41,25 @@  static char *get_reset_cause(void)
 		cause = "unknown reset";
 	}
 
-	/**
-	 * reset_reason env is used by rk3288, due to special use case
-	 * to figure it the boot behavior. so keep this as it is.
-	 */
-	env_set("reset_reason", cause);
-
 	return cause;
 }
 
+#if CONFIG_IS_ENABLED(DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
+	char *cause = get_reset_cause();
+
 	printf("SoC: Rockchip %s\n", CONFIG_SYS_SOC);
-	printf("Reset cause: %s\n", get_reset_cause());
+	printf("Reset cause: %s\n", cause);
+
+	/**
+	 * reset_reason env is used by rk3288, due to special use case
+	 * to figure it the boot behavior. so keep this as it is.
+	 */
+	env_set("reset_reason", cause);
 
 	/* TODO print operating temparature and clock */
 
 	return 0;
 }
+#endif