| Message ID | 20200724105119.13123-3-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
在 2020/7/24 下午6:51, Jagan Teki 写道: > PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. > > General features: > - Rockchip PX30 > - Up to 2GB DDR4 > - eMMC 4 GB expandible > - rest of PX30 features > > PX30.Core needs to mount on top of Engicam baseboards for creating > complete platform boards. > > Possible baseboards are, > - EDIMM2.2 > - C.TOUCH 2.0 10.1" Open Frame > > Add support for it. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > Note: > - Linux ML link: > https://lkml.org/lkml/2020/7/23/519 > > arch/arm/dts/px30-px30-core.dtsi | 250 +++++++++++++++++++++++++++++++ > 1 file changed, 250 insertions(+) > create mode 100644 arch/arm/dts/px30-px30-core.dtsi > > diff --git a/arch/arm/dts/px30-px30-core.dtsi b/arch/arm/dts/px30-px30-core.dtsi > new file mode 100644 > index 0000000000..26f81dbeab > --- /dev/null > +++ b/arch/arm/dts/px30-px30-core.dtsi > @@ -0,0 +1,250 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd > + * Copyright (c) 2020 Engicam srl > + * Copyright (c) 2020 Amarula Solutions(India) > + */ > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/rockchip.h> > + > +/ { > + compatible = "engicam,px30-px30-core", "rockchip,px30"; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_arm>; > +}; > + > +&emmc { > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + non-removable; > + status = "okay"; > +}; > + > +&gmac { > + clock_in_out = "output"; > + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ > + snps,reset-active-low; > + snps,reset-delays-us = <0 50000 50000>; > + snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + rk809: pmic@20 { > + compatible = "rockchip,rk809"; > + reg = <0x20>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int>; > + rockchip,system-power-controller; > + wakeup-source; > + #clock-cells = <1>; > + clock-output-names = "rk808-clkout1", "rk808-clkout2"; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc5-supply = <&vcc3v3_sys>; > + vcc6-supply = <&vcc3v3_sys>; > + vcc7-supply = <&vcc3v3_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + > + regulators { > + vdd_log: DCDC_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-max-microvolt = <1350000>; > + regulator-min-microvolt = <950000>; > + regulator-name = "vdd_log"; > + regulator-ramp-delay = <6001>; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <950000>; > + }; > + }; > + > + vdd_arm: DCDC_REG2 { > + regulator-max-microvolt = <1350000>; > + regulator-min-microvolt = <950000>; > + regulator-name = "vdd_arm"; > + regulator-ramp-delay = <6001>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <950000>; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_ddr"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_3v3: DCDC_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-max-microvolt = <3300000>; > + regulator-min-microvolt = <3300000>; > + regulator-name = "vcc_3v3"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc3v3_sys: DCDC_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3_sys"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc_1v0: LDO_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-name = "vcc_1v0"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1000000>; > + }; > + }; > + > + vcc_1v8: LDO_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_1v0: LDO_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-name = "vdd_1v0"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1000000>; > + }; > + }; > + > + vcc3v0_pmu: LDO_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v0_pmu"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + > + }; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_sd"; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc5v0_host: SWITCH_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc5v0_host"; > + }; > + }; > + }; > +}; > + > +&io_domains { > + vccio1-supply = <&vcc_3v3>; > + vccio2-supply = <&vcc_3v3>; > + vccio3-supply = <&vcc_3v3>; > + vccio4-supply = <&vcc_3v3>; > + vccio5-supply = <&vcc_3v3>; > + vccio6-supply = <&vcc_1v8>; > + status = "okay"; > +}; > + > +&pinctrl { > + pmic { > + pmic_int: pmic_int { > + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmuio1-supply = <&vcc_3v3>; > + pmuio2-supply = <&vcc_3v3>; > + status = "okay"; > +}; > + > +&pwm0 { > + status = "okay"; > +}; > + > +&sdmmc { > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <800>; > + vqmmc-supply = <&vcc_3v3>; > +}; > + > +&tsadc { > + rockchip,hw-tshut-mode = <1>; > + rockchip,hw-tshut-polarity = <1>; > + status = "okay"; > +};
diff --git a/arch/arm/dts/px30-px30-core.dtsi b/arch/arm/dts/px30-px30-core.dtsi new file mode 100644 index 0000000000..26f81dbeab --- /dev/null +++ b/arch/arm/dts/px30-px30-core.dtsi @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "engicam,px30-px30-core", "rockchip,px30"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_3v3>; /* +3V3_SOM */ + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_log"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sys"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vcc_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v0_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc5v0_host"; + }; + }; + }; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_3v3>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc_3v3>; + pmuio2-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <800>; + vqmmc-supply = <&vcc_3v3>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +};
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam. General features: - Rockchip PX30 - Up to 2GB DDR4 - eMMC 4 GB expandible - rest of PX30 features PX30.Core needs to mount on top of Engicam baseboards for creating complete platform boards. Possible baseboards are, - EDIMM2.2 - C.TOUCH 2.0 10.1" Open Frame Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Note: - Linux ML link: https://lkml.org/lkml/2020/7/23/519 arch/arm/dts/px30-px30-core.dtsi | 250 +++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 arch/arm/dts/px30-px30-core.dtsi