| Message ID | 20210304092133.21717-2-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
Hey Jagan, This patch also looks good to me. Reviewed-by: Robert Foss <robert.foss@linaro.org> On Thu, 4 Mar 2021 at 10:22, Jagan Teki <jagan@amarulasolutions.com> wrote: > > ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone. > > It has a flexible configuration of MIPI DSI signal input and > produce RGB565, RGB666, RGB888 output format. > > Add bridge driver for it. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v4: > - added regulators > - replace reset with EN > - fixed warnings pointed by Robert > Changes for v3: > - updated the driver to inline with new drm bridge style > > MAINTAINERS | 1 + > drivers/gpu/drm/bridge/Kconfig | 13 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/chipone-icn6211.c | 293 +++++++++++++++++++++++ > 4 files changed, 308 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 065cbdc889d3..9c59402e51bc 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -5533,6 +5533,7 @@ DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE > M: Jagan Teki <jagan@amarulasolutions.com> > S: Maintained > F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml > +F: drivers/gpu/drm/bridge/chipone-icn6211.c > > DRM DRIVER FOR FARADAY TVE200 TV ENCODER > M: Linus Walleij <linus.walleij@linaro.org> > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > index e4110d6ca7b3..330ee70ed746 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -27,6 +27,19 @@ config DRM_CDNS_DSI > Support Cadence DPI to DSI bridge. This is an internal > bridge and is meant to be directly embedded in a SoC. > > +config DRM_CHIPONE_ICN6211 > + tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" > + depends on OF > + select DRM_MIPI_DSI > + select DRM_PANEL_BRIDGE > + help > + ICN6211 is MIPI-DSI/RGB Converter bridge from chipone. > + > + It has a flexible configuration of MIPI DSI signal input > + and produce RGB565, RGB666, RGB888 output format. > + > + If in doubt, say "N". > + > config DRM_CHRONTEL_CH7033 > tristate "Chrontel CH7033 Video Encoder" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > index 86e7acc76f8d..3eb84b638988 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > +obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o > obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o > diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c > new file mode 100644 > index 000000000000..a6151db95586 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c > @@ -0,0 +1,293 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2020 Amarula Solutions(India) > + * Author: Jagan Teki <jagan@amarulasolutions.com> > + */ > + > +#include <drm/drm_of.h> > +#include <drm/drm_print.h> > +#include <drm/drm_mipi_dsi.h> > + > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/regulator/consumer.h> > + > +#include <video/mipi_display.h> > + > +#define HACTIVE_LI 0x20 > +#define VACTIVE_LI 0x21 > +#define VACTIVE_HACTIVE_HI 0x22 > +#define HFP_LI 0x23 > +#define HSYNC_LI 0x24 > +#define HBP_LI 0x25 > +#define HFP_HSW_HBP_HI 0x26 > +#define VFP 0x27 > +#define VSYNC 0x28 > +#define VBP 0x29 > + > +struct chipone { > + struct device *dev; > + struct drm_bridge bridge; > + struct drm_bridge *panel_bridge; > + struct gpio_desc *enable_gpio; > + struct regulator *vdd1; > + struct regulator *vdd2; > + struct regulator *vdd3; > +}; > + > +static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge) > +{ > + return container_of(bridge, struct chipone, bridge); > +} > + > +static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge) > +{ > + return &bridge->encoder->crtc->state->adjusted_mode; > +} > + > +static inline int chipone_dsi_write(struct chipone *icn, const void *seq, > + size_t len) > +{ > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev); > + > + return mipi_dsi_generic_write(dsi, seq, len); > +} > + > +#define ICN6211_DSI(icn, seq...) \ > + { \ > + const u8 d[] = { seq }; \ > + chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \ > + } > + > +static void chipone_enable(struct drm_bridge *bridge) > +{ > + struct chipone *icn = bridge_to_chipone(bridge); > + struct drm_display_mode *mode = bridge_to_mode(bridge); > + > + ICN6211_DSI(icn, 0x7a, 0xc1); > + > + ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff); > + > + ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff); > + > + /** > + * lsb nibble: 2nd nibble of hdisplay > + * msb nibble: 2nd nibble of vdisplay > + */ > + ICN6211_DSI(icn, VACTIVE_HACTIVE_HI, > + ((mode->hdisplay >> 8) & 0xf) | > + (((mode->vdisplay >> 8) & 0xf) << 4)); > + > + ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay); > + > + ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start); > + > + ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end); > + > + ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00); > + > + ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay); > + > + ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start); > + > + ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end); > + > + /* dsi specific sequence */ > + ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80); > + ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28); > + ICN6211_DSI(icn, 0xb5, 0xa0); > + ICN6211_DSI(icn, 0x5c, 0xff); > + ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01); > + ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92); > + ICN6211_DSI(icn, 0x6b, 0x71); > + ICN6211_DSI(icn, 0x69, 0x2b); > + ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40); > + ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98); > + > + /* icn6211 specific sequence */ > + ICN6211_DSI(icn, 0xb6, 0x20); > + ICN6211_DSI(icn, 0x51, 0x20); > + ICN6211_DSI(icn, 0x09, 0x10); > + > + usleep_range(10000, 11000); > +} > + > +static void chipone_pre_enable(struct drm_bridge *bridge) > +{ > + struct chipone *icn = bridge_to_chipone(bridge); > + int ret; > + > + if (icn->vdd1) { > + ret = regulator_enable(icn->vdd1); > + if (ret) > + DRM_DEV_ERROR(icn->dev, > + "failed to enable VDD1 regulator: %d\n", ret); > + } > + > + if (icn->vdd2) { > + ret = regulator_enable(icn->vdd2); > + if (ret) > + DRM_DEV_ERROR(icn->dev, > + "failed to enable VDD2 regulator: %d\n", ret); > + } > + > + if (icn->vdd3) { > + ret = regulator_enable(icn->vdd3); > + if (ret) > + DRM_DEV_ERROR(icn->dev, > + "failed to enable VDD3 regulator: %d\n", ret); > + } > + > + gpiod_set_value(icn->enable_gpio, 1); > + > + usleep_range(10000, 11000); > +} > + > +static void chipone_post_disable(struct drm_bridge *bridge) > +{ > + struct chipone *icn = bridge_to_chipone(bridge); > + > + if (icn->vdd1) > + regulator_disable(icn->vdd1); > + > + if (icn->vdd2) > + regulator_disable(icn->vdd2); > + > + if (icn->vdd3) > + regulator_disable(icn->vdd3); > + > + gpiod_set_value(icn->enable_gpio, 0); > +} > + > +static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) > +{ > + struct chipone *icn = bridge_to_chipone(bridge); > + > + return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags); > +} > + > +static const struct drm_bridge_funcs chipone_bridge_funcs = { > + .attach = chipone_attach, > + .post_disable = chipone_post_disable, > + .pre_enable = chipone_pre_enable, > + .enable = chipone_enable, > +}; > + > +static int chipone_parse_dt(struct chipone *icn) > +{ > + struct device *dev = icn->dev; > + struct drm_panel *panel; > + int ret; > + > + icn->vdd1 = devm_regulator_get_optional(dev, "vdd1"); > + if (IS_ERR(icn->vdd1)) { > + ret = PTR_ERR(icn->vdd1); > + if (ret == -EPROBE_DEFER) > + return -EPROBE_DEFER; > + icn->vdd1 = NULL; > + DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret); > + } > + > + icn->vdd2 = devm_regulator_get_optional(dev, "vdd2"); > + if (IS_ERR(icn->vdd2)) { > + ret = PTR_ERR(icn->vdd2); > + if (ret == -EPROBE_DEFER) > + return -EPROBE_DEFER; > + icn->vdd2 = NULL; > + DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret); > + } > + > + icn->vdd3 = devm_regulator_get_optional(dev, "vdd3"); > + if (IS_ERR(icn->vdd3)) { > + ret = PTR_ERR(icn->vdd3); > + if (ret == -EPROBE_DEFER) > + return -EPROBE_DEFER; > + icn->vdd3 = NULL; > + DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret); > + } > + > + icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); > + if (IS_ERR(icn->enable_gpio)) { > + DRM_DEV_ERROR(dev, "failed to get enable GPIO\n"); > + return PTR_ERR(icn->enable_gpio); > + } > + > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL); > + if (ret) > + return ret; > + > + icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > + if (IS_ERR(icn->panel_bridge)) > + return PTR_ERR(icn->panel_bridge); > + > + return 0; > +} > + > +static int chipone_probe(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + struct chipone *icn; > + int ret; > + > + icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL); > + if (!icn) > + return -ENOMEM; > + > + mipi_dsi_set_drvdata(dsi, icn); > + icn->dev = dev; > + > + ret = chipone_parse_dt(icn); > + if (ret) > + return ret; > + > + icn->bridge.funcs = &chipone_bridge_funcs; > + icn->bridge.type = DRM_MODE_CONNECTOR_DPI; > + icn->bridge.of_node = dev->of_node; > + > + drm_bridge_add(&icn->bridge); > + > + dsi->lanes = 4; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) { > + drm_bridge_remove(&icn->bridge); > + dev_err(dev, "failed to attach dsi\n"); > + } > + > + return ret; > +} > + > +static int chipone_remove(struct mipi_dsi_device *dsi) > +{ > + struct chipone *icn = mipi_dsi_get_drvdata(dsi); > + > + mipi_dsi_detach(dsi); > + drm_bridge_remove(&icn->bridge); > + > + return 0; > +} > + > +static const struct of_device_id chipone_of_match[] = { > + { .compatible = "chipone,icn6211", }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, chipone_of_match); > + > +static struct mipi_dsi_driver chipone_driver = { > + .probe = chipone_probe, > + .remove = chipone_remove, > + .driver = { > + .name = "chipone-icn6211", > + .owner = THIS_MODULE, > + .of_match_table = chipone_of_match, > + }, > +}; > +module_mipi_dsi_driver(chipone_driver); > + > +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); > +MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge"); > +MODULE_LICENSE("GPL"); > -- > 2.25.1 >
diff --git a/MAINTAINERS b/MAINTAINERS index 065cbdc889d3..9c59402e51bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5533,6 +5533,7 @@ DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE M: Jagan Teki <jagan@amarulasolutions.com> S: Maintained F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +F: drivers/gpu/drm/bridge/chipone-icn6211.c DRM DRIVER FOR FARADAY TVE200 TV ENCODER M: Linus Walleij <linus.walleij@linaro.org> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index e4110d6ca7b3..330ee70ed746 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -27,6 +27,19 @@ config DRM_CDNS_DSI Support Cadence DPI to DSI bridge. This is an internal bridge and is meant to be directly embedded in a SoC. +config DRM_CHIPONE_ICN6211 + tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" + depends on OF + select DRM_MIPI_DSI + select DRM_PANEL_BRIDGE + help + ICN6211 is MIPI-DSI/RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input + and produce RGB565, RGB666, RGB888 output format. + + If in doubt, say "N". + config DRM_CHRONTEL_CH7033 tristate "Chrontel CH7033 Video Encoder" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 86e7acc76f8d..3eb84b638988 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o +obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c new file mode 100644 index 000000000000..a6151db95586 --- /dev/null +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Amarula Solutions(India) + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <drm/drm_of.h> +#include <drm/drm_print.h> +#include <drm/drm_mipi_dsi.h> + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> + +#define HACTIVE_LI 0x20 +#define VACTIVE_LI 0x21 +#define VACTIVE_HACTIVE_HI 0x22 +#define HFP_LI 0x23 +#define HSYNC_LI 0x24 +#define HBP_LI 0x25 +#define HFP_HSW_HBP_HI 0x26 +#define VFP 0x27 +#define VSYNC 0x28 +#define VBP 0x29 + +struct chipone { + struct device *dev; + struct drm_bridge bridge; + struct drm_bridge *panel_bridge; + struct gpio_desc *enable_gpio; + struct regulator *vdd1; + struct regulator *vdd2; + struct regulator *vdd3; +}; + +static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge) +{ + return container_of(bridge, struct chipone, bridge); +} + +static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge) +{ + return &bridge->encoder->crtc->state->adjusted_mode; +} + +static inline int chipone_dsi_write(struct chipone *icn, const void *seq, + size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev); + + return mipi_dsi_generic_write(dsi, seq, len); +} + +#define ICN6211_DSI(icn, seq...) \ + { \ + const u8 d[] = { seq }; \ + chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \ + } + +static void chipone_enable(struct drm_bridge *bridge) +{ + struct chipone *icn = bridge_to_chipone(bridge); + struct drm_display_mode *mode = bridge_to_mode(bridge); + + ICN6211_DSI(icn, 0x7a, 0xc1); + + ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff); + + ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff); + + /** + * lsb nibble: 2nd nibble of hdisplay + * msb nibble: 2nd nibble of vdisplay + */ + ICN6211_DSI(icn, VACTIVE_HACTIVE_HI, + ((mode->hdisplay >> 8) & 0xf) | + (((mode->vdisplay >> 8) & 0xf) << 4)); + + ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay); + + ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start); + + ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end); + + ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00); + + ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay); + + ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start); + + ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end); + + /* dsi specific sequence */ + ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80); + ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28); + ICN6211_DSI(icn, 0xb5, 0xa0); + ICN6211_DSI(icn, 0x5c, 0xff); + ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01); + ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92); + ICN6211_DSI(icn, 0x6b, 0x71); + ICN6211_DSI(icn, 0x69, 0x2b); + ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40); + ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98); + + /* icn6211 specific sequence */ + ICN6211_DSI(icn, 0xb6, 0x20); + ICN6211_DSI(icn, 0x51, 0x20); + ICN6211_DSI(icn, 0x09, 0x10); + + usleep_range(10000, 11000); +} + +static void chipone_pre_enable(struct drm_bridge *bridge) +{ + struct chipone *icn = bridge_to_chipone(bridge); + int ret; + + if (icn->vdd1) { + ret = regulator_enable(icn->vdd1); + if (ret) + DRM_DEV_ERROR(icn->dev, + "failed to enable VDD1 regulator: %d\n", ret); + } + + if (icn->vdd2) { + ret = regulator_enable(icn->vdd2); + if (ret) + DRM_DEV_ERROR(icn->dev, + "failed to enable VDD2 regulator: %d\n", ret); + } + + if (icn->vdd3) { + ret = regulator_enable(icn->vdd3); + if (ret) + DRM_DEV_ERROR(icn->dev, + "failed to enable VDD3 regulator: %d\n", ret); + } + + gpiod_set_value(icn->enable_gpio, 1); + + usleep_range(10000, 11000); +} + +static void chipone_post_disable(struct drm_bridge *bridge) +{ + struct chipone *icn = bridge_to_chipone(bridge); + + if (icn->vdd1) + regulator_disable(icn->vdd1); + + if (icn->vdd2) + regulator_disable(icn->vdd2); + + if (icn->vdd3) + regulator_disable(icn->vdd3); + + gpiod_set_value(icn->enable_gpio, 0); +} + +static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) +{ + struct chipone *icn = bridge_to_chipone(bridge); + + return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags); +} + +static const struct drm_bridge_funcs chipone_bridge_funcs = { + .attach = chipone_attach, + .post_disable = chipone_post_disable, + .pre_enable = chipone_pre_enable, + .enable = chipone_enable, +}; + +static int chipone_parse_dt(struct chipone *icn) +{ + struct device *dev = icn->dev; + struct drm_panel *panel; + int ret; + + icn->vdd1 = devm_regulator_get_optional(dev, "vdd1"); + if (IS_ERR(icn->vdd1)) { + ret = PTR_ERR(icn->vdd1); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + icn->vdd1 = NULL; + DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret); + } + + icn->vdd2 = devm_regulator_get_optional(dev, "vdd2"); + if (IS_ERR(icn->vdd2)) { + ret = PTR_ERR(icn->vdd2); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + icn->vdd2 = NULL; + DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret); + } + + icn->vdd3 = devm_regulator_get_optional(dev, "vdd3"); + if (IS_ERR(icn->vdd3)) { + ret = PTR_ERR(icn->vdd3); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + icn->vdd3 = NULL; + DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret); + } + + icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(icn->enable_gpio)) { + DRM_DEV_ERROR(dev, "failed to get enable GPIO\n"); + return PTR_ERR(icn->enable_gpio); + } + + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL); + if (ret) + return ret; + + icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel); + if (IS_ERR(icn->panel_bridge)) + return PTR_ERR(icn->panel_bridge); + + return 0; +} + +static int chipone_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct chipone *icn; + int ret; + + icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL); + if (!icn) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, icn); + icn->dev = dev; + + ret = chipone_parse_dt(icn); + if (ret) + return ret; + + icn->bridge.funcs = &chipone_bridge_funcs; + icn->bridge.type = DRM_MODE_CONNECTOR_DPI; + icn->bridge.of_node = dev->of_node; + + drm_bridge_add(&icn->bridge); + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_bridge_remove(&icn->bridge); + dev_err(dev, "failed to attach dsi\n"); + } + + return ret; +} + +static int chipone_remove(struct mipi_dsi_device *dsi) +{ + struct chipone *icn = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_bridge_remove(&icn->bridge); + + return 0; +} + +static const struct of_device_id chipone_of_match[] = { + { .compatible = "chipone,icn6211", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, chipone_of_match); + +static struct mipi_dsi_driver chipone_driver = { + .probe = chipone_probe, + .remove = chipone_remove, + .driver = { + .name = "chipone-icn6211", + .owner = THIS_MODULE, + .of_match_table = chipone_of_match, + }, +}; +module_mipi_dsi_driver(chipone_driver); + +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); +MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge"); +MODULE_LICENSE("GPL");
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone. It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format. Add bridge driver for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v4: - added regulators - replace reset with EN - fixed warnings pointed by Robert Changes for v3: - updated the driver to inline with new drm bridge style MAINTAINERS | 1 + drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/chipone-icn6211.c | 293 +++++++++++++++++++++++ 4 files changed, 308 insertions(+) create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c