Message ID | 20211212181416.3312656-3-jagan@amarulasolutions.com |
---|---|
State | New |
Headers | show |
Series |
|
Related | show |
On 12.12.2021 19:14, Jagan Teki wrote: > Replace the manual panel handling code by a drm panel_bridge via > devm_drm_of_get_bridge(). > > Adding panel_bridge handling, > > - Drops drm_connector and related operations as drm_bridge_attach > creates connector during attachment. > > - Drops panel pointer and iterate the bridge, so-that it can operate > the normal bridge and panel_bridge in constitutive callbacks. > > This simplifies the driver and allows all components in the display > pipeline to be treated as bridges. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v3: > - fix port number > - add print for attached device > Changes for v2: > - new patch > > drivers/gpu/drm/exynos/exynos_drm_dsi.c | 165 ++++-------------------- > 1 file changed, 26 insertions(+), 139 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c > index 0bb44e476633..d1039628b6f2 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c > @@ -221,6 +221,11 @@ enum exynos_dsi_transfer_type { > EXYNOS_DSI_RX, > }; > > +enum { > + DSI_PORT_IN, > + DSI_PORT_OUT > +}; > + > struct exynos_dsi_transfer { > struct list_head list; > struct completion completed; > @@ -254,8 +259,6 @@ struct exynos_dsi_driver_data { > struct exynos_dsi { > struct drm_encoder encoder; > struct mipi_dsi_host dsi_host; > - struct drm_connector connector; > - struct drm_panel *panel; > struct list_head bridge_chain; > struct drm_bridge *out_bridge; > struct device *dev; > @@ -285,7 +288,6 @@ struct exynos_dsi { > }; > > #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host) > -#define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector) > > static inline struct exynos_dsi *encoder_to_dsi(struct drm_encoder *e) > { > @@ -1391,42 +1393,21 @@ static void exynos_dsi_enable(struct drm_encoder *encoder) > > dsi->state |= DSIM_STATE_ENABLED; > > - if (dsi->panel) { > - ret = drm_panel_prepare(dsi->panel); > - if (ret < 0) > - goto err_put_sync; > - } else { > - list_for_each_entry_reverse(iter, &dsi->bridge_chain, > - chain_node) { > - if (iter->funcs->pre_enable) > - iter->funcs->pre_enable(iter); > - } > + list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { > + if (iter->funcs->pre_enable) > + iter->funcs->pre_enable(iter); > } > > exynos_dsi_set_display_mode(dsi); > exynos_dsi_set_display_enable(dsi, true); > > - if (dsi->panel) { > - ret = drm_panel_enable(dsi->panel); > - if (ret < 0) > - goto err_display_disable; > - } else { > - list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { > - if (iter->funcs->enable) > - iter->funcs->enable(iter); > - } > + list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { > + if (iter->funcs->enable) > + iter->funcs->enable(iter); > } > > dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE; > return; > - > -err_display_disable: > - exynos_dsi_set_display_enable(dsi, false); > - drm_panel_unprepare(dsi->panel); > - > -err_put_sync: > - dsi->state &= ~DSIM_STATE_ENABLED; > - pm_runtime_put(dsi->dev); > } > > static void exynos_dsi_disable(struct drm_encoder *encoder) > @@ -1439,17 +1420,12 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) > > dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE; > > - if (dsi->panel) > - drm_panel_disable(dsi->panel); > - > list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { > if (iter->funcs->disable) > iter->funcs->disable(iter); > } > > exynos_dsi_set_display_enable(dsi, false); > - if (dsi->panel) > - drm_panel_unprepare(dsi->panel); > > list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { > if (iter->funcs->post_disable) > @@ -1460,70 +1436,6 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) > pm_runtime_put_sync(dsi->dev); > } > > -static enum drm_connector_status > -exynos_dsi_detect(struct drm_connector *connector, bool force) > -{ > - return connector->status; > -} > - > -static void exynos_dsi_connector_destroy(struct drm_connector *connector) > -{ > - drm_connector_unregister(connector); > - drm_connector_cleanup(connector); > - connector->dev = NULL; > -} > - > -static const struct drm_connector_funcs exynos_dsi_connector_funcs = { > - .detect = exynos_dsi_detect, > - .fill_modes = drm_helper_probe_single_connector_modes, > - .destroy = exynos_dsi_connector_destroy, > - .reset = drm_atomic_helper_connector_reset, > - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > -}; > - > -static int exynos_dsi_get_modes(struct drm_connector *connector) > -{ > - struct exynos_dsi *dsi = connector_to_dsi(connector); > - > - if (dsi->panel) > - return drm_panel_get_modes(dsi->panel, connector); > - > - return 0; > -} > - > -static const struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = { > - .get_modes = exynos_dsi_get_modes, > -}; > - > -static int exynos_dsi_create_connector(struct drm_encoder *encoder) > -{ > - struct exynos_dsi *dsi = encoder_to_dsi(encoder); > - struct drm_connector *connector = &dsi->connector; > - struct drm_device *drm = encoder->dev; > - int ret; > - > - connector->polled = DRM_CONNECTOR_POLL_HPD; > - > - ret = drm_connector_init(drm, connector, &exynos_dsi_connector_funcs, > - DRM_MODE_CONNECTOR_DSI); > - if (ret) { > - DRM_DEV_ERROR(dsi->dev, > - "Failed to initialize connector with drm\n"); > - return ret; > - } > - > - connector->status = connector_status_disconnected; > - drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs); > - drm_connector_attach_encoder(connector, encoder); > - if (!drm->registered) > - return 0; > - > - connector->funcs->reset(connector); > - drm_connector_register(connector); > - return 0; > -} > - > static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = { > .enable = exynos_dsi_enable, > .disable = exynos_dsi_disable, > @@ -1537,31 +1449,20 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, > struct exynos_dsi *dsi = host_to_dsi(host); > struct drm_encoder *encoder = &dsi->encoder; > struct drm_device *drm = encoder->dev; > - struct drm_bridge *out_bridge; > - > - out_bridge = of_drm_find_bridge(device->dev.of_node); > - if (out_bridge) { > - drm_bridge_attach(encoder, out_bridge, NULL, 0); > - dsi->out_bridge = out_bridge; > - list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain); > - } else { > - int ret = exynos_dsi_create_connector(encoder); > - > - if (ret) { > - DRM_DEV_ERROR(dsi->dev, > - "failed to create connector ret = %d\n", > - ret); > - drm_encoder_cleanup(encoder); > - return ret; > - } > + int ret; > > - dsi->panel = of_drm_find_panel(device->dev.of_node); > - if (IS_ERR(dsi->panel)) > - dsi->panel = NULL; > - else > - dsi->connector.status = connector_status_connected; > + dsi->out_bridge = devm_drm_of_get_bridge(dsi->dev, dsi->dev->of_node, DSI_PORT_OUT, 0); > + if (IS_ERR(dsi->out_bridge)) { > + ret = PTR_ERR(dsi->out_bridge); > + DRM_DEV_ERROR(dsi->dev, "failed to find the bridge: %d\n", ret); > + return ret; > } > > + DRM_DEV_INFO(dsi->dev, "Attached %s device\n", device->name); > + > + drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0); > + list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain); > + > /* > * This is a temporary solution and should be made by more generic way. > * > @@ -1569,7 +1470,7 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, > * TE interrupt handler. > */ > if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) { > - int ret = exynos_dsi_register_te_irq(dsi, &device->dev); > + ret = exynos_dsi_register_te_irq(dsi, &device->dev); > if (ret) > return ret; > } > @@ -1596,18 +1497,9 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host, > struct exynos_dsi *dsi = host_to_dsi(host); > struct drm_device *drm = dsi->encoder.dev; > > - if (dsi->panel) { > - mutex_lock(&drm->mode_config.mutex); > - exynos_dsi_disable(&dsi->encoder); > - dsi->panel = NULL; > - dsi->connector.status = connector_status_disconnected; > - mutex_unlock(&drm->mode_config.mutex); > - } else { > - if (dsi->out_bridge->funcs->detach) > - dsi->out_bridge->funcs->detach(dsi->out_bridge); > - dsi->out_bridge = NULL; > - INIT_LIST_HEAD(&dsi->bridge_chain); > - } > + if (dsi->out_bridge->funcs->detach) > + dsi->out_bridge->funcs->detach(dsi->out_bridge); > + INIT_LIST_HEAD(&dsi->bridge_chain); This is fishy. Currently the only bridge used with exynos_dsi (tc358764) on detach callback unregisters/puts the connector it has created. With this code panel_bridge on detach will call drm_connector_cleanup, which will WARN about unregistered connector - ie it assumes detach should be called at least AFTER unregistration of exynos_drm device (???). Since panel/bridge unbind in general case is not handled properly maybe it is not an issue :) Regards Andrzej > > if (drm->mode_config.poll_enabled) > drm_kms_helper_hotplug_event(drm); > @@ -1663,11 +1555,6 @@ static int exynos_dsi_of_read_u32(const struct device_node *np, > return ret; > } > > -enum { > - DSI_PORT_IN, > - DSI_PORT_OUT > -}; > - > static int exynos_dsi_parse_dt(struct exynos_dsi *dsi) > { > struct device *dev = dsi->dev;
Hi Andrzej, On Mon, Dec 13, 2021 at 2:39 PM Andrzej Hajda <andrzej.hajda@intel.com> wrote: > > > On 12.12.2021 19:14, Jagan Teki wrote: > > Replace the manual panel handling code by a drm panel_bridge via > > devm_drm_of_get_bridge(). > > > > Adding panel_bridge handling, > > > > - Drops drm_connector and related operations as drm_bridge_attach > > creates connector during attachment. > > > > - Drops panel pointer and iterate the bridge, so-that it can operate > > the normal bridge and panel_bridge in constitutive callbacks. > > > > This simplifies the driver and allows all components in the display > > pipeline to be treated as bridges. > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > Changes for v3: > > - fix port number > > - add print for attached device > > Changes for v2: > > - new patch > > > > drivers/gpu/drm/exynos/exynos_drm_dsi.c | 165 ++++-------------------- > > 1 file changed, 26 insertions(+), 139 deletions(-) > > > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c > > index 0bb44e476633..d1039628b6f2 100644 > > --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c > > +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c > > @@ -221,6 +221,11 @@ enum exynos_dsi_transfer_type { > > EXYNOS_DSI_RX, > > }; > > > > +enum { > > + DSI_PORT_IN, > > + DSI_PORT_OUT > > +}; > > + > > struct exynos_dsi_transfer { > > struct list_head list; > > struct completion completed; > > @@ -254,8 +259,6 @@ struct exynos_dsi_driver_data { > > struct exynos_dsi { > > struct drm_encoder encoder; > > struct mipi_dsi_host dsi_host; > > - struct drm_connector connector; > > - struct drm_panel *panel; > > struct list_head bridge_chain; > > struct drm_bridge *out_bridge; > > struct device *dev; > > @@ -285,7 +288,6 @@ struct exynos_dsi { > > }; > > > > #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host) > > -#define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector) > > > > static inline struct exynos_dsi *encoder_to_dsi(struct drm_encoder *e) > > { > > @@ -1391,42 +1393,21 @@ static void exynos_dsi_enable(struct drm_encoder *encoder) > > > > dsi->state |= DSIM_STATE_ENABLED; > > > > - if (dsi->panel) { > > - ret = drm_panel_prepare(dsi->panel); > > - if (ret < 0) > > - goto err_put_sync; > > - } else { > > - list_for_each_entry_reverse(iter, &dsi->bridge_chain, > > - chain_node) { > > - if (iter->funcs->pre_enable) > > - iter->funcs->pre_enable(iter); > > - } > > + list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { > > + if (iter->funcs->pre_enable) > > + iter->funcs->pre_enable(iter); > > } > > > > exynos_dsi_set_display_mode(dsi); > > exynos_dsi_set_display_enable(dsi, true); > > > > - if (dsi->panel) { > > - ret = drm_panel_enable(dsi->panel); > > - if (ret < 0) > > - goto err_display_disable; > > - } else { > > - list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { > > - if (iter->funcs->enable) > > - iter->funcs->enable(iter); > > - } > > + list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { > > + if (iter->funcs->enable) > > + iter->funcs->enable(iter); > > } > > > > dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE; > > return; > > - > > -err_display_disable: > > - exynos_dsi_set_display_enable(dsi, false); > > - drm_panel_unprepare(dsi->panel); > > - > > -err_put_sync: > > - dsi->state &= ~DSIM_STATE_ENABLED; > > - pm_runtime_put(dsi->dev); > > } > > > > static void exynos_dsi_disable(struct drm_encoder *encoder) > > @@ -1439,17 +1420,12 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) > > > > dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE; > > > > - if (dsi->panel) > > - drm_panel_disable(dsi->panel); > > - > > list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { > > if (iter->funcs->disable) > > iter->funcs->disable(iter); > > } > > > > exynos_dsi_set_display_enable(dsi, false); > > - if (dsi->panel) > > - drm_panel_unprepare(dsi->panel); > > > > list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { > > if (iter->funcs->post_disable) > > @@ -1460,70 +1436,6 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) > > pm_runtime_put_sync(dsi->dev); > > } > > > > -static enum drm_connector_status > > -exynos_dsi_detect(struct drm_connector *connector, bool force) > > -{ > > - return connector->status; > > -} > > - > > -static void exynos_dsi_connector_destroy(struct drm_connector *connector) > > -{ > > - drm_connector_unregister(connector); > > - drm_connector_cleanup(connector); > > - connector->dev = NULL; > > -} > > - > > -static const struct drm_connector_funcs exynos_dsi_connector_funcs = { > > - .detect = exynos_dsi_detect, > > - .fill_modes = drm_helper_probe_single_connector_modes, > > - .destroy = exynos_dsi_connector_destroy, > > - .reset = drm_atomic_helper_connector_reset, > > - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > -}; > > - > > -static int exynos_dsi_get_modes(struct drm_connector *connector) > > -{ > > - struct exynos_dsi *dsi = connector_to_dsi(connector); > > - > > - if (dsi->panel) > > - return drm_panel_get_modes(dsi->panel, connector); > > - > > - return 0; > > -} > > - > > -static const struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = { > > - .get_modes = exynos_dsi_get_modes, > > -}; > > - > > -static int exynos_dsi_create_connector(struct drm_encoder *encoder) > > -{ > > - struct exynos_dsi *dsi = encoder_to_dsi(encoder); > > - struct drm_connector *connector = &dsi->connector; > > - struct drm_device *drm = encoder->dev; > > - int ret; > > - > > - connector->polled = DRM_CONNECTOR_POLL_HPD; > > - > > - ret = drm_connector_init(drm, connector, &exynos_dsi_connector_funcs, > > - DRM_MODE_CONNECTOR_DSI); > > - if (ret) { > > - DRM_DEV_ERROR(dsi->dev, > > - "Failed to initialize connector with drm\n"); > > - return ret; > > - } > > - > > - connector->status = connector_status_disconnected; > > - drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs); > > - drm_connector_attach_encoder(connector, encoder); > > - if (!drm->registered) > > - return 0; > > - > > - connector->funcs->reset(connector); > > - drm_connector_register(connector); > > - return 0; > > -} > > - > > static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = { > > .enable = exynos_dsi_enable, > > .disable = exynos_dsi_disable, > > @@ -1537,31 +1449,20 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, > > struct exynos_dsi *dsi = host_to_dsi(host); > > struct drm_encoder *encoder = &dsi->encoder; > > struct drm_device *drm = encoder->dev; > > - struct drm_bridge *out_bridge; > > - > > - out_bridge = of_drm_find_bridge(device->dev.of_node); > > - if (out_bridge) { > > - drm_bridge_attach(encoder, out_bridge, NULL, 0); > > - dsi->out_bridge = out_bridge; > > - list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain); > > - } else { > > - int ret = exynos_dsi_create_connector(encoder); > > - > > - if (ret) { > > - DRM_DEV_ERROR(dsi->dev, > > - "failed to create connector ret = %d\n", > > - ret); > > - drm_encoder_cleanup(encoder); > > - return ret; > > - } > > + int ret; > > > > - dsi->panel = of_drm_find_panel(device->dev.of_node); > > - if (IS_ERR(dsi->panel)) > > - dsi->panel = NULL; > > - else > > - dsi->connector.status = connector_status_connected; > > + dsi->out_bridge = devm_drm_of_get_bridge(dsi->dev, dsi->dev->of_node, DSI_PORT_OUT, 0); > > + if (IS_ERR(dsi->out_bridge)) { > > + ret = PTR_ERR(dsi->out_bridge); > > + DRM_DEV_ERROR(dsi->dev, "failed to find the bridge: %d\n", ret); > > + return ret; > > } > > > > + DRM_DEV_INFO(dsi->dev, "Attached %s device\n", device->name); > > + > > + drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0); > > + list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain); > > + > > /* > > * This is a temporary solution and should be made by more generic way. > > * > > @@ -1569,7 +1470,7 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, > > * TE interrupt handler. > > */ > > if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) { > > - int ret = exynos_dsi_register_te_irq(dsi, &device->dev); > > + ret = exynos_dsi_register_te_irq(dsi, &device->dev); > > if (ret) > > return ret; > > } > > @@ -1596,18 +1497,9 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host, > > struct exynos_dsi *dsi = host_to_dsi(host); > > struct drm_device *drm = dsi->encoder.dev; > > > > - if (dsi->panel) { > > - mutex_lock(&drm->mode_config.mutex); > > - exynos_dsi_disable(&dsi->encoder); > > - dsi->panel = NULL; > > - dsi->connector.status = connector_status_disconnected; > > - mutex_unlock(&drm->mode_config.mutex); > > - } else { > > - if (dsi->out_bridge->funcs->detach) > > - dsi->out_bridge->funcs->detach(dsi->out_bridge); > > - dsi->out_bridge = NULL; > > - INIT_LIST_HEAD(&dsi->bridge_chain); > > - } > > + if (dsi->out_bridge->funcs->detach) > > + dsi->out_bridge->funcs->detach(dsi->out_bridge); > > + INIT_LIST_HEAD(&dsi->bridge_chain); > > > This is fishy. Currently the only bridge used with exynos_dsi (tc358764) > on detach callback unregisters/puts the connector it has created. I have a patch to drop the existing connector and add panel_bridge for tc358764. I believe this solve the connector stuff. > > With this code panel_bridge on detach will call drm_connector_cleanup, > which will WARN about unregistered connector - ie it assumes detach > should be called at least AFTER unregistration of exynos_drm device (???). Same will sort out if downstream bridge has panel_bridge conversation i think. > > Since panel/bridge unbind in general case is not handled properly maybe > it is not an issue :) i.e what I belive. Jagan.
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index 0bb44e476633..d1039628b6f2 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -221,6 +221,11 @@ enum exynos_dsi_transfer_type { EXYNOS_DSI_RX, }; +enum { + DSI_PORT_IN, + DSI_PORT_OUT +}; + struct exynos_dsi_transfer { struct list_head list; struct completion completed; @@ -254,8 +259,6 @@ struct exynos_dsi_driver_data { struct exynos_dsi { struct drm_encoder encoder; struct mipi_dsi_host dsi_host; - struct drm_connector connector; - struct drm_panel *panel; struct list_head bridge_chain; struct drm_bridge *out_bridge; struct device *dev; @@ -285,7 +288,6 @@ struct exynos_dsi { }; #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host) -#define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector) static inline struct exynos_dsi *encoder_to_dsi(struct drm_encoder *e) { @@ -1391,42 +1393,21 @@ static void exynos_dsi_enable(struct drm_encoder *encoder) dsi->state |= DSIM_STATE_ENABLED; - if (dsi->panel) { - ret = drm_panel_prepare(dsi->panel); - if (ret < 0) - goto err_put_sync; - } else { - list_for_each_entry_reverse(iter, &dsi->bridge_chain, - chain_node) { - if (iter->funcs->pre_enable) - iter->funcs->pre_enable(iter); - } + list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { + if (iter->funcs->pre_enable) + iter->funcs->pre_enable(iter); } exynos_dsi_set_display_mode(dsi); exynos_dsi_set_display_enable(dsi, true); - if (dsi->panel) { - ret = drm_panel_enable(dsi->panel); - if (ret < 0) - goto err_display_disable; - } else { - list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { - if (iter->funcs->enable) - iter->funcs->enable(iter); - } + list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { + if (iter->funcs->enable) + iter->funcs->enable(iter); } dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE; return; - -err_display_disable: - exynos_dsi_set_display_enable(dsi, false); - drm_panel_unprepare(dsi->panel); - -err_put_sync: - dsi->state &= ~DSIM_STATE_ENABLED; - pm_runtime_put(dsi->dev); } static void exynos_dsi_disable(struct drm_encoder *encoder) @@ -1439,17 +1420,12 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE; - if (dsi->panel) - drm_panel_disable(dsi->panel); - list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { if (iter->funcs->disable) iter->funcs->disable(iter); } exynos_dsi_set_display_enable(dsi, false); - if (dsi->panel) - drm_panel_unprepare(dsi->panel); list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { if (iter->funcs->post_disable) @@ -1460,70 +1436,6 @@ static void exynos_dsi_disable(struct drm_encoder *encoder) pm_runtime_put_sync(dsi->dev); } -static enum drm_connector_status -exynos_dsi_detect(struct drm_connector *connector, bool force) -{ - return connector->status; -} - -static void exynos_dsi_connector_destroy(struct drm_connector *connector) -{ - drm_connector_unregister(connector); - drm_connector_cleanup(connector); - connector->dev = NULL; -} - -static const struct drm_connector_funcs exynos_dsi_connector_funcs = { - .detect = exynos_dsi_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = exynos_dsi_connector_destroy, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int exynos_dsi_get_modes(struct drm_connector *connector) -{ - struct exynos_dsi *dsi = connector_to_dsi(connector); - - if (dsi->panel) - return drm_panel_get_modes(dsi->panel, connector); - - return 0; -} - -static const struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = { - .get_modes = exynos_dsi_get_modes, -}; - -static int exynos_dsi_create_connector(struct drm_encoder *encoder) -{ - struct exynos_dsi *dsi = encoder_to_dsi(encoder); - struct drm_connector *connector = &dsi->connector; - struct drm_device *drm = encoder->dev; - int ret; - - connector->polled = DRM_CONNECTOR_POLL_HPD; - - ret = drm_connector_init(drm, connector, &exynos_dsi_connector_funcs, - DRM_MODE_CONNECTOR_DSI); - if (ret) { - DRM_DEV_ERROR(dsi->dev, - "Failed to initialize connector with drm\n"); - return ret; - } - - connector->status = connector_status_disconnected; - drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs); - drm_connector_attach_encoder(connector, encoder); - if (!drm->registered) - return 0; - - connector->funcs->reset(connector); - drm_connector_register(connector); - return 0; -} - static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = { .enable = exynos_dsi_enable, .disable = exynos_dsi_disable, @@ -1537,31 +1449,20 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, struct exynos_dsi *dsi = host_to_dsi(host); struct drm_encoder *encoder = &dsi->encoder; struct drm_device *drm = encoder->dev; - struct drm_bridge *out_bridge; - - out_bridge = of_drm_find_bridge(device->dev.of_node); - if (out_bridge) { - drm_bridge_attach(encoder, out_bridge, NULL, 0); - dsi->out_bridge = out_bridge; - list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain); - } else { - int ret = exynos_dsi_create_connector(encoder); - - if (ret) { - DRM_DEV_ERROR(dsi->dev, - "failed to create connector ret = %d\n", - ret); - drm_encoder_cleanup(encoder); - return ret; - } + int ret; - dsi->panel = of_drm_find_panel(device->dev.of_node); - if (IS_ERR(dsi->panel)) - dsi->panel = NULL; - else - dsi->connector.status = connector_status_connected; + dsi->out_bridge = devm_drm_of_get_bridge(dsi->dev, dsi->dev->of_node, DSI_PORT_OUT, 0); + if (IS_ERR(dsi->out_bridge)) { + ret = PTR_ERR(dsi->out_bridge); + DRM_DEV_ERROR(dsi->dev, "failed to find the bridge: %d\n", ret); + return ret; } + DRM_DEV_INFO(dsi->dev, "Attached %s device\n", device->name); + + drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0); + list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain); + /* * This is a temporary solution and should be made by more generic way. * @@ -1569,7 +1470,7 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host, * TE interrupt handler. */ if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) { - int ret = exynos_dsi_register_te_irq(dsi, &device->dev); + ret = exynos_dsi_register_te_irq(dsi, &device->dev); if (ret) return ret; } @@ -1596,18 +1497,9 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host, struct exynos_dsi *dsi = host_to_dsi(host); struct drm_device *drm = dsi->encoder.dev; - if (dsi->panel) { - mutex_lock(&drm->mode_config.mutex); - exynos_dsi_disable(&dsi->encoder); - dsi->panel = NULL; - dsi->connector.status = connector_status_disconnected; - mutex_unlock(&drm->mode_config.mutex); - } else { - if (dsi->out_bridge->funcs->detach) - dsi->out_bridge->funcs->detach(dsi->out_bridge); - dsi->out_bridge = NULL; - INIT_LIST_HEAD(&dsi->bridge_chain); - } + if (dsi->out_bridge->funcs->detach) + dsi->out_bridge->funcs->detach(dsi->out_bridge); + INIT_LIST_HEAD(&dsi->bridge_chain); if (drm->mode_config.poll_enabled) drm_kms_helper_hotplug_event(drm); @@ -1663,11 +1555,6 @@ static int exynos_dsi_of_read_u32(const struct device_node *np, return ret; } -enum { - DSI_PORT_IN, - DSI_PORT_OUT -}; - static int exynos_dsi_parse_dt(struct exynos_dsi *dsi) { struct device *dev = dsi->dev;
Replace the manual panel handling code by a drm panel_bridge via devm_drm_of_get_bridge(). Adding panel_bridge handling, - Drops drm_connector and related operations as drm_bridge_attach creates connector during attachment. - Drops panel pointer and iterate the bridge, so-that it can operate the normal bridge and panel_bridge in constitutive callbacks. This simplifies the driver and allows all components in the display pipeline to be treated as bridges. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - fix port number - add print for attached device Changes for v2: - new patch drivers/gpu/drm/exynos/exynos_drm_dsi.c | 165 ++++-------------------- 1 file changed, 26 insertions(+), 139 deletions(-)