[2/2] configs: imx6-engicam: Update the recoveryboot setting

Message ID 20190321085002.21084-2-jagan@amarulasolutions.com
State New
Headers show
Series
  • [1/2] board: engicam: Handle mmc recovery partition, root
Related show

Commit Message

Jagan Teki March 21, 2019, 8:50 a.m. UTC
Since recovery boot on mmc can get the mmcpart and mmcroot
dynamically, drop the static definitions and handle it
properly.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 include/configs/imx6-engicam.h | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

Patch

diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 571852d803..56b3c7503e 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -43,30 +43,20 @@ 
 	"fdt_addr=" FDT_ADDR "\0" \
 	"boot_fdt=try\0" \
 	"mmcpart=1\0" \
-	"recovery_device=0\0" \
-	"recovery_part=2\0" \
-	"recovery_root=/dev/mmcblk0p2 rootwait rw\0" \
 	"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
-	"recovery_mmcargs= setenv bootargs console=${console},${baudrate} "\
-		"root=${recovery_root}\0" \
 	"ubiargs=setenv bootargs console=${console},${baudrate} " \
 		"ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"recovery_loadimage=ext2load mmc ${recovery_device}:${recovery_part} ${loadaddr} ${image}\0" \
-	"recovery_loadfdt=ext2load mmc ${recovery_device}:${recovery_part} ${fdt_addr} ${fdt_file}\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
-	"altbootcmd=run recovery_boot\0"\
-	"recovery_boot=echo Recovery Boot from mmc ...; " \
-		"run recovery_loadimage ; run recovery_loadfdt; run recovery_mmcargs; "\
-		"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"altbootcmd=run recoveryboot\0"\
 	"fitboot=echo Booting FIT image from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -108,7 +98,12 @@ 
 		"run ubiargs; " \
 		"nand read ${loadaddr} kernel 0x800000; " \
 		"nand read ${fdt_addr} dtb 0x100000; " \
-		"bootm ${loadaddr} - ${fdt_addr}\0"
+		"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"recoveryboot=if test ${modeboot} = mmcboot; then " \
+			"run mmcboot; " \
+		"else " \
+			"run nandboot; " \
+		"fi\0"
 
 #define CONFIG_BOOTCOMMAND		"run $modeboot"