Message ID | 20190416105647.18437-13-jagan@amarulasolutions.com |
---|---|
State | New |
Headers | show |
Series |
|
Related | show |
Hi, Le mardi 16 avril 2019 à 16:26 +0530, Jagan Teki a écrit : > Add initial support for Nanopi NEO4 board. > > Specification > - Rockchip RK3399 > - 1GB DDR3-1866 > - SD card slot > - eMMC Socket > - RTL8211E 1Gbps > - AP6212 WiFI/BT > - HDMI In/Out, DP, MIPI CSI > - USB 3.0, 2.0 > - USB Type C power and data > - GPIO expansion ports > - DC 5V/3A > > Commit details of rk3399-nanopi-neo4.dts sync from Linux: > "arm64: dts: rockchip: Add Nanopi NEO4 initial support" > (sha1: 092470b537f19788d957aed12d835a179b606014) I think SPL support should be disabled for this one. Cheers, Paul > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > arch/arm/dts/Makefile | 1 + > arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +++ > arch/arm/dts/rk3399-nanopi-neo4.dts | 50 ++++++++++++++++++ > board/rockchip/evb_rk3399/MAINTAINERS | 6 +++ > configs/nanopi-neo4-rk3399_defconfig | 58 +++++++++++++++++++++ > 5 files changed, 121 insertions(+) > create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi > create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts > create mode 100644 configs/nanopi-neo4-rk3399_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index e048565bb6..ede7da23fb 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > rk3399-gru-bob.dtb \ > rk3399-nanopc-t4.dtb \ > rk3399-nanopi-m4.dtb \ > + rk3399-nanopi-neo4.dtb \ > rk3399-orangepi.dtb \ > rk3399-puma-ddr1333.dtb \ > rk3399-puma-ddr1600.dtb \ > diff --git a/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi > new file mode 100644 > index 0000000000..7bddc3acdb > --- /dev/null > +++ b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi > @@ -0,0 +1,6 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> > + */ > + > +#include "rk3399-u-boot.dtsi" > diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts > new file mode 100644 > index 0000000000..195410b089 > --- /dev/null > +++ b/arch/arm/dts/rk3399-nanopi-neo4.dts > @@ -0,0 +1,50 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2019 Amarula Solutions B.V. > + * Author: Jagan Teki <jagan@amarulasolutions.com> > + */ > + > +/dts-v1/; > + > +#include "rk3399-nanopi4.dtsi" > + > +/ { > + model = "FriendlyARM NanoPi NEO4"; > + compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399"; > + > + vdd_5v: vdd-5v { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_5v"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vcc5v0_core: vcc5v0-core { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_core"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vdd_5v>; > + }; > + > + vcc5v0_usb1: vcc5v0-usb1 { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_usb1"; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + > +&vcc3v3_sys { > + vin-supply = <&vcc5v0_core>; > +}; > + > +&u2phy0_host { > + phy-supply = <&vcc5v0_usb1>; > +}; > + > +&vbus_typec { > + regulator-always-on; > + vin-supply = <&vdd_5v>; > +}; > diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS > index 5917abb9c1..ed58861820 100644 > --- a/board/rockchip/evb_rk3399/MAINTAINERS > +++ b/board/rockchip/evb_rk3399/MAINTAINERS > @@ -18,6 +18,12 @@ S: Maintained > F: configs/nanopi-m4-rk3399_defconfig > F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi > > +NANOPI-NEO4 > +M: Jagan Teki <jagan@amarulasolutions.com> > +S: Maintained > +F: configs/nanopi-neo4-rk3399_defconfig > +F: arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi > + > ORANGEPI-RK3399 > M: Jagan Teki <jagan@amarulasolutions.com> > S: Maintained > diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig > new file mode 100644 > index 0000000000..eb9d81ae87 > --- /dev/null > +++ b/configs/nanopi-neo4-rk3399_defconfig > @@ -0,0 +1,58 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_ROCKCHIP=y > +CONFIG_SYS_TEXT_BASE=0x00200000 > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > +CONFIG_SYS_MALLOC_F_LEN=0x4000 > +CONFIG_ROCKCHIP_RK3399=y > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 > +CONFIG_DEBUG_UART_BASE=0xFF1A0000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_SPL_STACK_R_ADDR=0x80000 > +CONFIG_DEBUG_UART=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb" > +# CONFIG_DISPLAY_CPUINFO is not set > +CONFIG_DISPLAY_BOARDINFO_LATE=y > +CONFIG_SPL_STACK_R=y > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 > +CONFIG_CMD_BOOTZ=y > +CONFIG_CMD_GPT=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_USB=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_TIME=y > +CONFIG_SPL_OF_CONTROL=y > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4" > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ENV_IS_IN_MMC=y > +CONFIG_ROCKCHIP_GPIO=y > +CONFIG_SYS_I2C_ROCKCHIP=y > +CONFIG_MMC_DW=y > +CONFIG_MMC_DW_ROCKCHIP=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_ROCKCHIP=y > +CONFIG_DM_ETH=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_GMAC_ROCKCHIP=y > +CONFIG_PMIC_RK8XX=y > +CONFIG_REGULATOR_PWM=y > +CONFIG_REGULATOR_RK8XX=y > +CONFIG_PWM_ROCKCHIP=y > +CONFIG_BAUDRATE=1500000 > +CONFIG_DEBUG_UART_SHIFT=2 > +CONFIG_SYSRESET=y > +CONFIG_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_GENERIC=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_ASIX=y > +CONFIG_USB_ETHER_ASIX88179=y > +CONFIG_USB_ETHER_MCS7830=y > +CONFIG_USB_ETHER_RTL8152=y > +CONFIG_USB_ETHER_SMSC95XX=y > +CONFIG_USE_TINY_PRINTF=y > +CONFIG_ERRNO_STR=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e048565bb6..ede7da23fb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3399-gru-bob.dtb \ rk3399-nanopc-t4.dtb \ rk3399-nanopi-m4.dtb \ + rk3399-nanopi-neo4.dtb \ rk3399-orangepi.dtb \ rk3399-puma-ddr1333.dtb \ rk3399-puma-ddr1600.dtb \ diff --git a/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi new file mode 100644 index 0000000000..7bddc3acdb --- /dev/null +++ b/arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> + */ + +#include "rk3399-u-boot.dtsi" diff --git a/arch/arm/dts/rk3399-nanopi-neo4.dts b/arch/arm/dts/rk3399-nanopi-neo4.dts new file mode 100644 index 0000000000..195410b089 --- /dev/null +++ b/arch/arm/dts/rk3399-nanopi-neo4.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyARM NanoPi NEO4"; + compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399"; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_core: vcc5v0-core { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; + + vcc5v0_usb1: vcc5v0-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_core>; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb1>; +}; + +&vbus_typec { + regulator-always-on; + vin-supply = <&vdd_5v>; +}; diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS index 5917abb9c1..ed58861820 100644 --- a/board/rockchip/evb_rk3399/MAINTAINERS +++ b/board/rockchip/evb_rk3399/MAINTAINERS @@ -18,6 +18,12 @@ S: Maintained F: configs/nanopi-m4-rk3399_defconfig F: arch/arm/dts/rk3399-nanopi-m4-u-boot.dtsi +NANOPI-NEO4 +M: Jagan Teki <jagan@amarulasolutions.com> +S: Maintained +F: configs/nanopi-neo4-rk3399_defconfig +F: arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi + ORANGEPI-RK3399 M: Jagan Teki <jagan@amarulasolutions.com> S: Maintained diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig new file mode 100644 index 0000000000..eb9d81ae87 --- /dev/null +++ b/configs/nanopi-neo4-rk3399_defconfig @@ -0,0 +1,58 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_ROCKCHIP_RK3399=y +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_STACK_R_ADDR=0x80000 +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-neo4" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USE_TINY_PRINTF=y +CONFIG_ERRNO_STR=y
Add initial support for Nanopi NEO4 board. Specification - Rockchip RK3399 - 1GB DDR3-1866 - SD card slot - eMMC Socket - RTL8211E 1Gbps - AP6212 WiFI/BT - HDMI In/Out, DP, MIPI CSI - USB 3.0, 2.0 - USB Type C power and data - GPIO expansion ports - DC 5V/3A Commit details of rk3399-nanopi-neo4.dts sync from Linux: "arm64: dts: rockchip: Add Nanopi NEO4 initial support" (sha1: 092470b537f19788d957aed12d835a179b606014) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi | 6 +++ arch/arm/dts/rk3399-nanopi-neo4.dts | 50 ++++++++++++++++++ board/rockchip/evb_rk3399/MAINTAINERS | 6 +++ configs/nanopi-neo4-rk3399_defconfig | 58 +++++++++++++++++++++ 5 files changed, 121 insertions(+) create mode 100644 arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi create mode 100644 arch/arm/dts/rk3399-nanopi-neo4.dts create mode 100644 configs/nanopi-neo4-rk3399_defconfig