[1/3] rk3399: orangepi: Enable TPL

Message ID 20190509105746.24830-1-jagan@amarulasolutions.com
State New
Headers show
Series
  • [1/3] rk3399: orangepi: Enable TPL
Related show

Commit Message

Jagan Teki May 9, 2019, 10:57 a.m. UTC
Enable TPL for OrangePI rk3399 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 configs/orangepi-rk3399_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Kever Yang May 29, 2019, 8:01 a.m. UTC | #1
Hi Jagan,


On 05/09/2019 06:57 PM, Jagan Teki wrote:
> Enable TPL for OrangePI rk3399 board.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
> ---
>  configs/orangepi-rk3399_defconfig | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
> index 3f02c89983..90021bb695 100644
> --- a/configs/orangepi-rk3399_defconfig
> +++ b/configs/orangepi-rk3399_defconfig
> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>  CONFIG_SYS_MALLOC_F_LEN=0x4000
>  CONFIG_ROCKCHIP_RK3399=y
> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
>  CONFIG_DEBUG_UART_BASE=0xFF1A0000
>  CONFIG_DEBUG_UART_CLOCK=24000000
>  CONFIG_SPL_STACK_R_ADDR=0x80000
> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1
>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_TEXT_BASE=0xff8c2000
>  CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>  CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_MMC=y
> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_USB=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_TIME=y
> +CONFIG_TPL=y
>  CONFIG_SPL_OF_CONTROL=y
>  CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
>  CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y
>  CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
Kever Yang May 29, 2019, 8:06 a.m. UTC | #2
Hi Jagan,

    The first two patches need re-base after the patch from Tom:

344a0e4367 configs: Resync with savedefconfig


Thanks,
- Kever
On 05/09/2019 06:57 PM, Jagan Teki wrote:
> Enable TPL for OrangePI rk3399 board.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  configs/orangepi-rk3399_defconfig | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
> index 3f02c89983..90021bb695 100644
> --- a/configs/orangepi-rk3399_defconfig
> +++ b/configs/orangepi-rk3399_defconfig
> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>  CONFIG_SYS_MALLOC_F_LEN=0x4000
>  CONFIG_ROCKCHIP_RK3399=y
> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
>  CONFIG_DEBUG_UART_BASE=0xFF1A0000
>  CONFIG_DEBUG_UART_CLOCK=24000000
>  CONFIG_SPL_STACK_R_ADDR=0x80000
> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1
>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_TEXT_BASE=0xff8c2000
>  CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>  CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_MMC=y
> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_USB=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_TIME=y
> +CONFIG_TPL=y
>  CONFIG_SPL_OF_CONTROL=y
>  CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
>  CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y
>  CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
Kever Yang June 1, 2019, 2:39 a.m. UTC | #3
On 05/29/2019 04:01 PM, Kever Yang wrote:
> Hi Jagan,
>
>
> On 05/09/2019 06:57 PM, Jagan Teki wrote:
>> Enable TPL for OrangePI rk3399 board.
>>
>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Applied to u-boot-rockchip/master, thanks!

>
> Thanks,
> - Kever
>> ---
>>  configs/orangepi-rk3399_defconfig | 7 ++++---
>>  1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
>> index 3f02c89983..90021bb695 100644
>> --- a/configs/orangepi-rk3399_defconfig
>> +++ b/configs/orangepi-rk3399_defconfig
>> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>>  CONFIG_SYS_MALLOC_F_LEN=0x4000
>>  CONFIG_ROCKCHIP_RK3399=y
>> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
>> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
>>  CONFIG_DEBUG_UART_BASE=0xFF1A0000
>>  CONFIG_DEBUG_UART_CLOCK=24000000
>>  CONFIG_SPL_STACK_R_ADDR=0x80000
>> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1
>>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
>>  # CONFIG_DISPLAY_CPUINFO is not set
>>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>> -CONFIG_SPL_TEXT_BASE=0xff8c2000
>>  CONFIG_SPL_STACK_R=y
>> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
>> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>>  CONFIG_CMD_BOOTZ=y
>>  CONFIG_CMD_GPT=y
>>  CONFIG_CMD_MMC=y
>> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y
>>  CONFIG_CMD_USB=y
>>  # CONFIG_CMD_SETEXPR is not set
>>  CONFIG_CMD_TIME=y
>> +CONFIG_TPL=y
>>  CONFIG_SPL_OF_CONTROL=y
>>  CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
>>  CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y
>>  CONFIG_USB_ETHER_RTL8152=y
>>  CONFIG_USB_ETHER_SMSC95XX=y
>>  CONFIG_USE_TINY_PRINTF=y
>> +CONFIG_SPL_TINY_MEMSET=y
>>  CONFIG_ERRNO_STR=y
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>

Patch

diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
index 3f02c89983..90021bb695 100644
--- a/configs/orangepi-rk3399_defconfig
+++ b/configs/orangepi-rk3399_defconfig
@@ -5,7 +5,7 @@  CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_ROCKCHIP_RK3399=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_STACK_R_ADDR=0x80000
@@ -14,9 +14,8 @@  CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_TEXT_BASE=0xff8c2000
 CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
@@ -24,6 +23,7 @@  CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
+CONFIG_TPL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
@@ -56,4 +56,5 @@  CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y