| Message ID | 20190509105746.24830-2-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
Hi Jagan, On 05/09/2019 06:57 PM, Jagan Teki wrote: > Enable TPL for NanoPC T4, NanoPI M4 boards. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > configs/nanopc-t4-rk3399_defconfig | 7 ++++--- > configs/nanopi-m4-rk3399_defconfig | 7 ++++--- > 2 files changed, 8 insertions(+), 6 deletions(-) > > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig > index d9f2137b4c..9b7e15d63a 100644 > --- a/configs/nanopc-t4-rk3399_defconfig > +++ b/configs/nanopc-t4-rk3399_defconfig > @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > CONFIG_SYS_MALLOC_F_LEN=0x4000 > CONFIG_ROCKCHIP_RK3399=y > -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 > CONFIG_DEBUG_UART_BASE=0xFF1A0000 > CONFIG_DEBUG_UART_CLOCK=24000000 > CONFIG_SPL_STACK_R_ADDR=0x80000 > @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1 > CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb" > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > -CONFIG_SPL_TEXT_BASE=0xff8c2000 > CONFIG_SPL_STACK_R=y > -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_USB=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > +CONFIG_TPL=y > CONFIG_SPL_OF_CONTROL=y > CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4" > CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y > CONFIG_USB_ETHER_RTL8152=y > CONFIG_USB_ETHER_SMSC95XX=y > CONFIG_USE_TINY_PRINTF=y > +CONFIG_SPL_TINY_MEMSET=y > CONFIG_ERRNO_STR=y > diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig > index c2832788f0..92e70dd939 100644 > --- a/configs/nanopi-m4-rk3399_defconfig > +++ b/configs/nanopi-m4-rk3399_defconfig > @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > CONFIG_SYS_MALLOC_F_LEN=0x4000 > CONFIG_ROCKCHIP_RK3399=y > -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 > CONFIG_DEBUG_UART_BASE=0xFF1A0000 > CONFIG_DEBUG_UART_CLOCK=24000000 > CONFIG_SPL_STACK_R_ADDR=0x80000 > @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1 > CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb" > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > -CONFIG_SPL_TEXT_BASE=0xff8c2000 > CONFIG_SPL_STACK_R=y > -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPT=y > CONFIG_CMD_MMC=y > @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y > CONFIG_CMD_USB=y > # CONFIG_CMD_SETEXPR is not set > CONFIG_CMD_TIME=y > +CONFIG_TPL=y > CONFIG_SPL_OF_CONTROL=y > CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4" > CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y > CONFIG_USB_ETHER_RTL8152=y > CONFIG_USB_ETHER_SMSC95XX=y > CONFIG_USE_TINY_PRINTF=y > +CONFIG_SPL_TINY_MEMSET=y > CONFIG_ERRNO_STR=y
On 05/29/2019 04:02 PM, Kever Yang wrote: > Hi Jagan, > > > On 05/09/2019 06:57 PM, Jagan Teki wrote: >> Enable TPL for NanoPC T4, NanoPI M4 boards. >> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Applied to u-boot-rockchip/master, thanks! > > Thanks, > - Kever >> --- >> configs/nanopc-t4-rk3399_defconfig | 7 ++++--- >> configs/nanopi-m4-rk3399_defconfig | 7 ++++--- >> 2 files changed, 8 insertions(+), 6 deletions(-) >> >> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig >> index d9f2137b4c..9b7e15d63a 100644 >> --- a/configs/nanopc-t4-rk3399_defconfig >> +++ b/configs/nanopc-t4-rk3399_defconfig >> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y >> CONFIG_SPL_LIBGENERIC_SUPPORT=y >> CONFIG_SYS_MALLOC_F_LEN=0x4000 >> CONFIG_ROCKCHIP_RK3399=y >> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 >> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 >> CONFIG_DEBUG_UART_BASE=0xFF1A0000 >> CONFIG_DEBUG_UART_CLOCK=24000000 >> CONFIG_SPL_STACK_R_ADDR=0x80000 >> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1 >> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb" >> # CONFIG_DISPLAY_CPUINFO is not set >> CONFIG_DISPLAY_BOARDINFO_LATE=y >> -CONFIG_SPL_TEXT_BASE=0xff8c2000 >> CONFIG_SPL_STACK_R=y >> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 >> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 >> CONFIG_CMD_BOOTZ=y >> CONFIG_CMD_GPT=y >> CONFIG_CMD_MMC=y >> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y >> CONFIG_CMD_USB=y >> # CONFIG_CMD_SETEXPR is not set >> CONFIG_CMD_TIME=y >> +CONFIG_TPL=y >> CONFIG_SPL_OF_CONTROL=y >> CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4" >> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" >> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y >> CONFIG_USB_ETHER_RTL8152=y >> CONFIG_USB_ETHER_SMSC95XX=y >> CONFIG_USE_TINY_PRINTF=y >> +CONFIG_SPL_TINY_MEMSET=y >> CONFIG_ERRNO_STR=y >> diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig >> index c2832788f0..92e70dd939 100644 >> --- a/configs/nanopi-m4-rk3399_defconfig >> +++ b/configs/nanopi-m4-rk3399_defconfig >> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y >> CONFIG_SPL_LIBGENERIC_SUPPORT=y >> CONFIG_SYS_MALLOC_F_LEN=0x4000 >> CONFIG_ROCKCHIP_RK3399=y >> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 >> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 >> CONFIG_DEBUG_UART_BASE=0xFF1A0000 >> CONFIG_DEBUG_UART_CLOCK=24000000 >> CONFIG_SPL_STACK_R_ADDR=0x80000 >> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1 >> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb" >> # CONFIG_DISPLAY_CPUINFO is not set >> CONFIG_DISPLAY_BOARDINFO_LATE=y >> -CONFIG_SPL_TEXT_BASE=0xff8c2000 >> CONFIG_SPL_STACK_R=y >> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 >> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 >> CONFIG_CMD_BOOTZ=y >> CONFIG_CMD_GPT=y >> CONFIG_CMD_MMC=y >> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y >> CONFIG_CMD_USB=y >> # CONFIG_CMD_SETEXPR is not set >> CONFIG_CMD_TIME=y >> +CONFIG_TPL=y >> CONFIG_SPL_OF_CONTROL=y >> CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4" >> CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" >> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y >> CONFIG_USB_ETHER_RTL8152=y >> CONFIG_USB_ETHER_SMSC95XX=y >> CONFIG_USE_TINY_PRINTF=y >> +CONFIG_SPL_TINY_MEMSET=y >> CONFIG_ERRNO_STR=y > > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip >
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig index d9f2137b4c..9b7e15d63a 100644 --- a/configs/nanopc-t4-rk3399_defconfig +++ b/configs/nanopc-t4-rk3399_defconfig @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_ROCKCHIP_RK3399=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_STACK_R_ADDR=0x80000 @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_TEXT_BASE=0xff8c2000 CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y +CONFIG_TPL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y CONFIG_USE_TINY_PRINTF=y +CONFIG_SPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig index c2832788f0..92e70dd939 100644 --- a/configs/nanopi-m4-rk3399_defconfig +++ b/configs/nanopi-m4-rk3399_defconfig @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_ROCKCHIP_RK3399=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000 +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_STACK_R_ADDR=0x80000 @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_TEXT_BASE=0xff8c2000 CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIME=y +CONFIG_TPL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-m4" CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y CONFIG_USB_ETHER_RTL8152=y CONFIG_USB_ETHER_SMSC95XX=y CONFIG_USE_TINY_PRINTF=y +CONFIG_SPL_TINY_MEMSET=y CONFIG_ERRNO_STR=y
Enable TPL for NanoPC T4, NanoPI M4 boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- configs/nanopc-t4-rk3399_defconfig | 7 ++++--- configs/nanopi-m4-rk3399_defconfig | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-)