diff --git a/board/bsh/imx6ulz_smm_m2/Kconfig b/board/bsh/imx6ulz_smm_m2/Kconfig index e38df7ce5cb..414bb48d979 100644 --- a/board/bsh/imx6ulz_smm_m2/Kconfig +++ b/board/bsh/imx6ulz_smm_m2/Kconfig @@ -9,4 +9,25 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "imx6ulz_smm_m2" +choice + prompt "Memory Type (M2/M2B) board" + default BSH_M2_MEMORY + help + Memory type setup. + Please choose correct memory model here. + +config BSH_M2_MEMORY + bool "Enable for bsh m2 variant" + help + If this option is enabled, U-Boot will configured to support + imx6ulz bsh m2 revision memories. + +config BSH_M2B_MEMORY + bool "Enable for bsh m2b variant" + help + If this option is enabled, U-Boot will configured to support + imx6ulz bsh m2b revision memories. + +endchoice + endif diff --git a/board/bsh/imx6ulz_smm_m2/Makefile b/board/bsh/imx6ulz_smm_m2/Makefile index 4f4d67f659d..233bbff4c16 100644 --- a/board/bsh/imx6ulz_smm_m2/Makefile +++ b/board/bsh/imx6ulz_smm_m2/Makefile @@ -2,4 +2,6 @@ # (C) Copyright 2021 Amarula Solutions B.V. obj-y := imx6ulz_smm_m2.o -obj-$(CONFIG_XPL_BUILD) += spl.o ddr3l_timing_512m.o ddr3l_timing_256m.o ddr3l_timing_128m.o +obj-$(CONFIG_XPL_BUILD) += spl.o +obj-$(CONFIG_BSH_M2_MEMORY) += ddr3l_timing_512m.o ddr3l_timing_256m.o ddr3l_timing_128m.o +obj-$(CONFIG_BSH_M2B_MEMORY) += ddr3l_timing_256m_m2b.o ddr3l_timing_128m_m2b.o diff --git a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_128m.c b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_128m.c index 66c3483adbf..f11654a8ceb 100644 --- a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_128m.c +++ b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_128m.c @@ -166,4 +166,5 @@ static const struct dram_cfg_param ddr_ddrc_cfg_128mb[] = { struct dram_timing_info bsh_dram_timing_128mb = { .ddrc_cfg = ddr_ddrc_cfg_128mb, .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg_128mb), + .dram_size = SZ_128M, }; diff --git a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_128m_m2b.c b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_128m_m2b.c new file mode 100644 index 00000000000..f989e24f567 --- /dev/null +++ b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_128m_m2b.c @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "spl_mtypes.h" + +static const struct dram_cfg_param ddr_ddrc_cfg_128mb[] = { + /* IOMUX */ + + /* DDR IO Type: */ + {0x020e04b4, 0x000C0000}, /* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE */ + {0x020e04ac, 0x00000000}, /* IOMUXC_SW_PAD_CTL_GRP_DDRPKE */ + + /* Clock: */ + {0x020e027c, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0 */ + + /* Address: */ + {0x020e0250, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS */ + {0x020e024c, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS */ + {0x020e0490, 0x00000028}, /* IOMUXC_SW_PAD_CTL_GRP_ADDDS */ + + /* Control: */ + {0x020e0288, 0x000C0028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET */ + {0x020e0270, 0x00000000}, /* + * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2 - DSE can be configured + * using Group Control Register IOMUXC_SW_PAD_CTL_GRP_CTLDS + */ + + {0x020e0260, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0 */ + {0x020e0264, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1 */ + {0x020e04a0, 0x00000028}, /* IOMUXC_SW_PAD_CTL_GRP_CTLDS */ + + /* Data Strobes: */ + {0x020e0494, 0x00020000}, /* IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL */ + {0x020e0280, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 */ + {0x020e0284, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 */ + + /* Data: */ + {0x020e04b0, 0x00020000}, /* IOMUXC_SW_PAD_CTL_GRP_DDRMODE */ + {0x020e0498, 0x00000028}, /* IOMUXC_SW_PAD_CTL_GRP_B0DS */ + {0x020e04a4, 0x00000028}, /* IOMUXC_SW_PAD_CTL_GRP_B1DS */ + + {0x020e0244, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 */ + {0x020e0248, 0x00000028}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 */ + + /* + * ============================================================================= + * DDR Controller Registers + * ============================================================================= + * Manufacturer:WINBOND + * Device Part Number:W631GU6RB-11 + * Clock Freq.: 400MHz + * Density per CS in Gb: 1 + * Chip Selects used:1 + * Total DRAM density (Gb)1 + * Number of Banks:8 + * Row address: 13 + * Column address: 10 + * Data bus width16 + * ============================================================================= + */ + {0x021b001c, 0x00008000}, /* + * MMDC0_MDSCR, set the Configuration request bit + * during MMDC set up + */ + + /* + * ============================================================================= + * Calibration setup. + * ============================================================================= + */ + {0x021b0800, 0xA1390003}, /* + * DDR_PHY_P0_MPZQHWCTRL, enable both one-time & periodic + * HW ZQ calibration. + */ + + /* + * For target board, may need to run write leveling calibration to fine tune + * these settings. + */ + {0x021b080c, 0x00060002}, + + /* Read DQS Gating calibration */ + {0x021b083c, 0x414c0150}, /* MPDGCTRL0 PHY0 */ + + /* Read calibration */ + {0x021b0848, 0x4040363e}, /* MPRDDLCTL PHY0 */ + + /* Write calibration */ + {0x021b0850, 0x40402a28}, /* MPWRDLCTL PHY0 */ + + /* + * Read data bit delay: 3 is the recommended default value, although out of reset + * value is 0. + */ + {0x021b081c, 0x33333333}, /* MMDC_MPRDDQBY0DL */ + {0x021b0820, 0x33333333}, /* MMDC_MPRDDQBY1DL */ + + /* Write data bit delay: */ + {0x021b082c, 0xf3333333}, /* MMDC_MPWRDQBY0DL */ + {0x021b0830, 0xf3333333}, /* MMDC_MPWRDQBY1DL */ + + /* DQS&CLK Duty Cycle */ + {0x021b08c0, 0x00944009}, /* [MMDC_MPDCCR] MMDC Duty Cycle Control Register */ + + /* Complete calibration by forced measurement: */ + {0x021b08b8, 0x00000800}, /* DDR_PHY_P0_MPMUR0, frc_msr */ + + /* MMDC init: */ + {0x021b0004, 0x0002002D}, /* MMDC0_MDPDC */ + {0x021b0008, 0x1B333030}, /* MMDC0_MDOTC */ + {0x021b000c, 0x2B2F52F3}, /* MMDC0_MDCFG0 */ + {0x021b0010, 0xB66D0A63}, /* MMDC0_MDCFG1 */ + {0x021b0014, 0x01FF00DB}, /* MMDC0_MDCFG2 */ + {0x021b0018, 0x00201740}, /* MMDC0_MDMISC */ + {0x021b002C, 0x000026D2}, /* MMDC0_MDRWD */ + {0x021b0030, 0x002F1023}, /* MMDC0_MDOR */ + {0x021b0040, 0x00000043}, /* CS0_END */ + {0x021b0000, 0x82180000}, /* MMDC0_MDCTL */ + + /* Mode register writes for CS0 */ + {0x021B001C, 0x02808032}, /* MMDC0_MDSCR, MR2 write, CS0 */ + {0x021B001C, 0x00008033}, /* MMDC0_MDSCR, MR3 write, CS0 */ + {0x021B001C, 0x00048031}, /* MMDC0_MDSCR, MR1 write, CS0 */ + {0x021B001C, 0x15208030}, /* MMDC0_MDSCR, MR0 write, CS0 */ + {0x021B001C, 0x04008040}, /* + * MMDC0_MDSCR, ZQ calibration + * command sent to device on CS0 + */ + + /* final DDR setup, before operation start: */ + {0x021b0020, 0x00000800}, /* MMDC0_MDREF */ + + {0x021b0818, 0x00000227}, /* DDR_PHY_P0_MPODTCTRL */ + + {0x021b0004, 0x0002556D}, /* MMDC0_MDPDC now SDCTL power down enabled */ + + {0x021b0404, 0x00011006}, /* + * MMDC0_MAPSR ADOPT power down enabled, + * MMDC will enter automatically to self-refresh + * while the number of idle cycle reached. + */ + + {0x021b001c, 0x00000000}, /* + * MMDC0_MDSCR, clear this register (especially the + * configuration bit as initialization is complete) + */ +}; + +struct dram_timing_info bsh_dram_timing_128mb = { + .ddrc_cfg = ddr_ddrc_cfg_128mb, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg_128mb), + .dram_size = SZ_128M, +}; diff --git a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_256m.c b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_256m.c index 0fe5b90a673..5dfc9f5c70d 100644 --- a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_256m.c +++ b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_256m.c @@ -165,4 +165,5 @@ static const struct dram_cfg_param ddr_ddrc_cfg_256mb[] = { struct dram_timing_info bsh_dram_timing_256mb = { .ddrc_cfg = ddr_ddrc_cfg_256mb, .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg_256mb), + .dram_size = SZ_256M, }; diff --git a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_256m_m2b.c b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_256m_m2b.c new file mode 100644 index 00000000000..c44f632b928 --- /dev/null +++ b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_256m_m2b.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "spl_mtypes.h" + +static const struct dram_cfg_param ddr_ddrc_cfg_256mb[] = { + /* IOMUX */ + + /* DDR IO Type: */ + {0x020e04b4, 0x000C0000}, /* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE */ + {0x020e04ac, 0x00000000}, /* IOMUXC_SW_PAD_CTL_GRP_DDRPKE */ + + /* Clock: */ + {0x020e027c, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK0_P */ + + /* Address: */ + {0x020e0250, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS */ + {0x020e024c, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS */ + {0x020e0490, 0x00000030}, /* IOMUXC_SW_PAD_CTL_GRP_ADDDS */ + + /* Control: */ + {0x020e0288, 0x000C0030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET */ + {0x020e0270, 0x00000000}, /* + * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2 - DSE can be + * configured using Group Control Register: + * IOMUXC_SW_PAD_CTL_GRP_CTLDS + */ + + {0x020e0260, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_ODT0 */ + {0x020e0264, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_ODT1 */ + {0x020e04a0, 0x00000028}, /* IOMUXC_SW_PAD_CTL_GRP_CTLDS */ + + /* Data Strobes: */ + {0x020e0494, 0x00020000}, /* IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL */ + {0x020e0280, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0_P */ + {0x020e0284, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1_P */ + + /* Data: */ + {0x020e04b0, 0x00020000}, /* IOMUXC_SW_PAD_CTL_GRP_DDRMODE */ + {0x020e0498, 0x00000030}, /* IOMUXC_SW_PAD_CTL_GRP_B0DS */ + {0x020e04a4, 0x00000030}, /* IOMUXC_SW_PAD_CTL_GRP_B1DS */ + + {0x020e0244, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 */ + {0x020e0248, 0x00000030}, /* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 */ + + /* + * ============================================================================= + * DDR Controller Registers + * ============================================================================= + * Manufacturer:WINBOND + * Device Part Number:W632GU6RB-11 + * Clock Freq.: 400MHz + * Density per CS in Gb: 2 + * Chip Selects used:1 + * Total DRAM density (Gb)2 + * Number of Banks:8 + * Row address: 14 + * Column address: 10 + * Data bus width16 + * ============================================================================= + */ + {0x021b001c, 0x00008000}, /* + * MMDC0_MDSCR, set the Configuration request bit + * during MMDC set up + */ + + /* + * ============================================================================= + * Calibration setup. + * ============================================================================= + */ + {0x021b0800, 0xA1390003}, /* + * DDR_PHY_P0_MPZQHWCTRL, enable both one-time & periodic + * HW ZQ calibration. + */ + + /* + * For target board, may need to run write leveling calibration to fine tune + * these settings. + */ + {0x021b080c, 0x00070005}, + + /* Read DQS Gating calibration */ + {0x021b083c, 0x414c0150}, /* MPDGCTRL0 PHY0 */ + + /* Read calibration */ + {0x021b0848, 0x4040383e}, /* MMDC_MPRDDLCTL */ + + /* Write calibration */ + {0x021b0850, 0x40402e2a}, /* MMDC_MPWRDLCTL */ + + {0x021B081C, 0x33333333}, /* MMDC_MPRDDQBY0DL */ + {0x021B0820, 0x33333333}, /* MMDC_MPRDDQBY1DL */ + + {0x021B082C, 0xf3333333}, /* MMDC_MPWRDQBY0DL */ + {0x021B0830, 0xf3333333}, /* MMDC_MPWRDQBY1DL */ + + {0x021B08C0, 0x00944009}, /* MMDC_MPDCCR */ + + /* Complete calibration by forced measurement: */ + {0x021B08B8, 0x00000800}, /* DDR_PHY_P0_MPMUR0, frc_msr */ + + /* MMDC init: */ + {0x021b0004, 0x00020024}, /* MMDC0_MDPDC */ + {0x021b0008, 0x1B333030}, /* MMDC0_MDOTC */ + {0x021b000c, 0x3F4352D3}, /* MMDC0_MDCFG0 */ + {0x021b0010, 0xB66D0A63}, /* MMDC0_MDCFG1 */ + {0x021b0014, 0x01FF00DB}, /* MMDC0_MDCFG2 */ + {0x021b0018, 0x00201740}, /* MMDC0_MDMISC */ + {0x021b002C, 0x000026D2}, /* MMDC0_MDRWD */ + {0x021b0030, 0x00431023}, /* MMDC0_MDOR */ + {0x021b0040, 0x00000047}, /* CS0_END */ + {0x021b0000, 0x83180000}, /* MMDC0_MDCTL */ + + /* Mode register writes for CS0 */ + {0x021B001C, 0x02808032}, /* MMDC0_MDSCR, MR2 write, CS0 */ + {0x021B001C, 0x00008033}, /* MMDC0_MDSCR, MR3 write, CS0 */ + {0x021B001C, 0x00048031}, /* MMDC0_MDSCR, MR1 write, CS0 */ + {0x021B001C, 0x15208030}, /* MMDC0_MDSCR, MR0 write, CS0 */ + {0x021B001C, 0x04008040}, /* MMDC0_MDSCR, ZQ calibration */ + + /* final DDR setup, before operation start: */ + {0x021b0020, 0x00000800}, /* MMDC0_MDREF */ + + {0x021b0818, 0x00000227}, /* DDR_PHY_P0_MPODTCTRL */ + {0x021b0004, 0x00025564}, /* MMDC0_MDPDC now SDCTL power down enabled */ + {0x021b0404, 0x00011006}, /* MMDC0_MAPSR ADOPT power down enabled */ + {0x021b001c, 0x00000000}, /* + * MMDC0_MDSCR, clear this register (especially + * the configuration bit as initialization is complete) + */ +}; + +struct dram_timing_info bsh_dram_timing_256mb = { + .ddrc_cfg = ddr_ddrc_cfg_256mb, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg_256mb), + .dram_size = SZ_256M, +}; diff --git a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_512m.c b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_512m.c index f5989382f5a..4c2ffcd429d 100644 --- a/board/bsh/imx6ulz_smm_m2/ddr3l_timing_512m.c +++ b/board/bsh/imx6ulz_smm_m2/ddr3l_timing_512m.c @@ -165,4 +165,5 @@ static const struct dram_cfg_param ddr_ddrc_cfg_512mb[] = { struct dram_timing_info bsh_dram_timing_512mb = { .ddrc_cfg = ddr_ddrc_cfg_512mb, .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg_512mb), + .dram_size = SZ_512M, }; diff --git a/board/bsh/imx6ulz_smm_m2/spl.c b/board/bsh/imx6ulz_smm_m2/spl.c index c330e4d6d39..7aea73f0f5d 100644 --- a/board/bsh/imx6ulz_smm_m2/spl.c +++ b/board/bsh/imx6ulz_smm_m2/spl.c @@ -52,28 +52,31 @@ static void ddr_cfg_write(const struct dram_timing_info *dram_timing_info) } } +static const struct dram_timing_info *board_dram_timing[] = { +#if defined(CONFIG_M2_MEMORY) + &bsh_dram_timing_512mb, +#endif + &bsh_dram_timing_256mb, + &bsh_dram_timing_128mb, +}; + static void spl_dram_init(void) { /* Configure memory to maximum supported size for detection */ - ddr_cfg_write(&bsh_dram_timing_512mb); + ddr_cfg_write(board_dram_timing[0]); /* Detect memory physically present */ - gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE, SZ_512M); - - /* Reconfigure memory for actual detected size */ - switch (gd->ram_size) { - case SZ_512M: - /* Already configured, nothing to do */ - break; - case SZ_256M: - udelay(1); - ddr_cfg_write(&bsh_dram_timing_256mb); - break; - case SZ_128M: - default: - udelay(1); - ddr_cfg_write(&bsh_dram_timing_128mb); - break; + gd->ram_size = get_ram_size((void *)CFG_SYS_SDRAM_BASE, board_dram_timing[0]->dram_size); + + if (board_dram_timing[0]->dram_size == gd->ram_size) + return; + + for (size_t index = 1; index < ARRAY_SIZE(board_dram_timing); index++) { + if (board_dram_timing[index]->dram_size == gd->ram_size) { + udelay(1); + ddr_cfg_write(board_dram_timing[index]); + break; + } } } diff --git a/board/bsh/imx6ulz_smm_m2/spl_mtypes.h b/board/bsh/imx6ulz_smm_m2/spl_mtypes.h index 8da59881c83..06d6f2d76d8 100644 --- a/board/bsh/imx6ulz_smm_m2/spl_mtypes.h +++ b/board/bsh/imx6ulz_smm_m2/spl_mtypes.h @@ -18,6 +18,7 @@ struct dram_cfg_param { struct dram_timing_info { const struct dram_cfg_param *ddrc_cfg; unsigned int ddrc_cfg_num; + size_t dram_size; }; extern struct dram_timing_info bsh_dram_timing_128mb; diff --git a/configs/imx6ulz_smm_m2b_defconfig b/configs/imx6ulz_smm_m2b_defconfig new file mode 100644 index 00000000000..c9e66adde98 --- /dev/null +++ b/configs/imx6ulz_smm_m2b_defconfig @@ -0,0 +1,78 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TEXT_BASE=0x87800000 +CONFIG_SYS_MALLOC_LEN=0x1000000 +CONFIG_SYS_MALLOC_F_LEN=0x18000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x400000 +CONFIG_MX6ULL=y +CONFIG_TARGET_MX6ULZ_SMM_M2=y +CONFIG_BSH_M2B_MEMORY=y +CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6ulz-bsh-smm-m2" +CONFIG_SPL_SERIAL=y +CONFIG_SPL_BSS_START_ADDR=0x84100000 +CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_DMA=y +CONFIG_SPL_MTD=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_WATCHDOG=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" +CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:4m(nandboot),1m(env),8m(kernel),1m(nanddtb),-(rootfs)" +CONFIG_CMD_UBI=y +# CONFIG_ISO_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NO_NET=y +CONFIG_BOUNCE_BUFFER=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x82000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_UUU_SUPPORT=y +CONFIG_SYS_I2C_MXC=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_NAND_USE_FLASH_BBT=y +CONFIG_NAND_MXS=y +CONFIG_NAND_MXS_DT=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x111400 +CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x291400 +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_MXC_UART=y +CONFIG_IMX_THERMAL=y +CONFIG_USB=y +CONFIG_SPL_USB_HOST=y +CONFIG_USB_GADGET=y +CONFIG_SPL_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="BSH" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_CI_UDC=y +CONFIG_SDP_LOADADDR=0x877fffc0 +CONFIG_SPL_USB_SDP_SUPPORT=y