@@ -9,6 +9,7 @@
#include "sun50i-a64.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Amarula A64-Relic";
@@ -18,6 +19,14 @@
serial0 = &uart0;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <1 2 4 8 16 32 64 128 255>;
+ default-brightness-level = <2>;
+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PD23 */
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -80,6 +89,28 @@
};
};
+&de {
+ status = "okay";
+};
+
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <®_dldo1>; /* VCC-DSI */
+ status = "okay";
+
+ panel@0 {
+ compatible = "techstar,ts8550b", "sitronix,st7701";
+ reg = <0>;
+ VCC-supply = <®_dldo2>; /* VCC-MIPI */
+ IOVCC-supply = <®_dldo2>; /* VCC-MIPI */
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -151,6 +182,10 @@
status = "okay";
};
+&pwm {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
Amarula A64-Relic board by default bound with Techstar TS8550B MIPI-DSI panel, add support for it. DSI panel connected via board DSI port with, - DLDO1 as VCC-DSI supply - DLDO2 as VCC supply - DLDO2 as IOVCC supply - PD24 gpio for reset pin - PD23 gpio for backlight enable pin Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- .../allwinner/sun50i-a64-amarula-relic.dts | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+)