| Message ID | 20190729074711.16988-10-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On 2019/7/29 下午3:47, Jagan Teki wrote: > - use dw instead of designware for driver file since > Linux following the same. > - add CONFIG macro start with CONFIG_WDT since the > driver mode wdt drivers follow this. > > Cc: Dinh Nguyen <dinguyen@kernel.org> > Cc: Chin-Liang See <clsee@altera.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > common/board_f.c | 2 +- > drivers/watchdog/Makefile | 2 +- > drivers/watchdog/{designware_wdt.c => dw_wdt.c} | 0 > include/configs/socfpga_common.h | 2 +- > include/configs/socfpga_stratix10_socdk.h | 2 +- > scripts/config_whitelist.txt | 2 +- > 6 files changed, 5 insertions(+), 5 deletions(-) > rename drivers/watchdog/{designware_wdt.c => dw_wdt.c} (100%) > > diff --git a/common/board_f.c b/common/board_f.c > index 4760d728f3..79efef0792 100644 > --- a/common/board_f.c > +++ b/common/board_f.c > @@ -95,7 +95,7 @@ static int init_func_watchdog_init(void) > # if defined(CONFIG_HW_WATCHDOG) && \ > (defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \ > defined(CONFIG_SH) || \ > - defined(CONFIG_DESIGNWARE_WATCHDOG) || \ > + defined(CONFIG_WDT_DW) || \ > defined(CONFIG_IMX_WATCHDOG)) > hw_watchdog_init(); > puts(" Watchdog enabled\n"); > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 68c989aa0b..a14fdabf8d 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -13,7 +13,6 @@ endif > obj-$(CONFIG_S5P) += s5p_wdt.o > obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o > obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o > -obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o > obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o > obj-$(CONFIG_WDT) += wdt-uclass.o > obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o > @@ -23,6 +22,7 @@ obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o > obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o > obj-$(CONFIG_WDT_ORION) += orion_wdt.o > obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o > +obj-$(CONFIG_WDT_DW) += dw_wdt.o > obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o > obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o > obj-$(CONFIG_WDT_MTK) += mtk_wdt.o > diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/dw_wdt.c > similarity index 100% > rename from drivers/watchdog/designware_wdt.c > rename to drivers/watchdog/dw_wdt.c > diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h > index d1034ac280..65f02eca2e 100644 > --- a/include/configs/socfpga_common.h > +++ b/include/configs/socfpga_common.h > @@ -105,7 +105,7 @@ > * L4 Watchdog > */ > #ifdef CONFIG_HW_WATCHDOG > -#define CONFIG_DESIGNWARE_WATCHDOG > +#define CONFIG_WDT_DW > #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS > #define CONFIG_DW_WDT_CLOCK_KHZ 25000 > #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 > diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h > index 8d2971c6e2..3582aec822 100644 > --- a/include/configs/socfpga_stratix10_socdk.h > +++ b/include/configs/socfpga_stratix10_socdk.h > @@ -161,7 +161,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void); > */ > #ifdef CONFIG_SPL_BUILD > #define CONFIG_HW_WATCHDOG > -#define CONFIG_DESIGNWARE_WATCHDOG > +#define CONFIG_WDT_DW > #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS > #ifndef __ASSEMBLY__ > unsigned int cm_get_l4_sys_free_clk_hz(void); > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt > index e616f7229b..f2453728c6 100644 > --- a/scripts/config_whitelist.txt > +++ b/scripts/config_whitelist.txt > @@ -323,7 +323,7 @@ CONFIG_DEFAULT_IMMR > CONFIG_DEF_HWCONFIG > CONFIG_DELAY_ENVIRONMENT > CONFIG_DESIGNWARE_ETH > -CONFIG_DESIGNWARE_WATCHDOG > +CONFIG_WDT_DW Is it better to define a WDT_DW in drivers/watchdog/Kconfig so that we don't need this white list? Thanks, - Kever > CONFIG_DEVELOP > CONFIG_DEVICE_TREE_LIST > CONFIG_DFU_ALT
On Mon, Aug 5, 2019 at 6:10 PM Kever Yang <kever.yang@rock-chips.com> wrote: > > > On 2019/7/29 下午3:47, Jagan Teki wrote: > > - use dw instead of designware for driver file since > > Linux following the same. > > - add CONFIG macro start with CONFIG_WDT since the > > driver mode wdt drivers follow this. > > > > Cc: Dinh Nguyen <dinguyen@kernel.org> > > Cc: Chin-Liang See <clsee@altera.com> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > common/board_f.c | 2 +- > > drivers/watchdog/Makefile | 2 +- > > drivers/watchdog/{designware_wdt.c => dw_wdt.c} | 0 > > include/configs/socfpga_common.h | 2 +- > > include/configs/socfpga_stratix10_socdk.h | 2 +- > > scripts/config_whitelist.txt | 2 +- > > 6 files changed, 5 insertions(+), 5 deletions(-) > > rename drivers/watchdog/{designware_wdt.c => dw_wdt.c} (100%) > > > > diff --git a/common/board_f.c b/common/board_f.c > > index 4760d728f3..79efef0792 100644 > > --- a/common/board_f.c > > +++ b/common/board_f.c > > @@ -95,7 +95,7 @@ static int init_func_watchdog_init(void) > > # if defined(CONFIG_HW_WATCHDOG) && \ > > (defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \ > > defined(CONFIG_SH) || \ > > - defined(CONFIG_DESIGNWARE_WATCHDOG) || \ > > + defined(CONFIG_WDT_DW) || \ > > defined(CONFIG_IMX_WATCHDOG)) > > hw_watchdog_init(); > > puts(" Watchdog enabled\n"); > > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > > index 68c989aa0b..a14fdabf8d 100644 > > --- a/drivers/watchdog/Makefile > > +++ b/drivers/watchdog/Makefile > > @@ -13,7 +13,6 @@ endif > > obj-$(CONFIG_S5P) += s5p_wdt.o > > obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o > > obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o > > -obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o > > obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o > > obj-$(CONFIG_WDT) += wdt-uclass.o > > obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o > > @@ -23,6 +22,7 @@ obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o > > obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o > > obj-$(CONFIG_WDT_ORION) += orion_wdt.o > > obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o > > +obj-$(CONFIG_WDT_DW) += dw_wdt.o > > obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o > > obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o > > obj-$(CONFIG_WDT_MTK) += mtk_wdt.o > > diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/dw_wdt.c > > similarity index 100% > > rename from drivers/watchdog/designware_wdt.c > > rename to drivers/watchdog/dw_wdt.c > > diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h > > index d1034ac280..65f02eca2e 100644 > > --- a/include/configs/socfpga_common.h > > +++ b/include/configs/socfpga_common.h > > @@ -105,7 +105,7 @@ > > * L4 Watchdog > > */ > > #ifdef CONFIG_HW_WATCHDOG > > -#define CONFIG_DESIGNWARE_WATCHDOG > > +#define CONFIG_WDT_DW > > #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS > > #define CONFIG_DW_WDT_CLOCK_KHZ 25000 > > #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 > > diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h > > index 8d2971c6e2..3582aec822 100644 > > --- a/include/configs/socfpga_stratix10_socdk.h > > +++ b/include/configs/socfpga_stratix10_socdk.h > > @@ -161,7 +161,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void); > > */ > > #ifdef CONFIG_SPL_BUILD > > #define CONFIG_HW_WATCHDOG > > -#define CONFIG_DESIGNWARE_WATCHDOG > > +#define CONFIG_WDT_DW > > #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS > > #ifndef __ASSEMBLY__ > > unsigned int cm_get_l4_sys_free_clk_hz(void); > > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt > > index e616f7229b..f2453728c6 100644 > > --- a/scripts/config_whitelist.txt > > +++ b/scripts/config_whitelist.txt > > @@ -323,7 +323,7 @@ CONFIG_DEFAULT_IMMR > > CONFIG_DEF_HWCONFIG > > CONFIG_DELAY_ENVIRONMENT > > CONFIG_DESIGNWARE_ETH > > -CONFIG_DESIGNWARE_WATCHDOG > > +CONFIG_WDT_DW > > Is it better to define a WDT_DW in drivers/watchdog/Kconfig so that we > don't need > > this white list? 11/15 path doing the same, this make sure not to break the configs which doesn't enable DM_WDT.
diff --git a/common/board_f.c b/common/board_f.c index 4760d728f3..79efef0792 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -95,7 +95,7 @@ static int init_func_watchdog_init(void) # if defined(CONFIG_HW_WATCHDOG) && \ (defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \ defined(CONFIG_SH) || \ - defined(CONFIG_DESIGNWARE_WATCHDOG) || \ + defined(CONFIG_WDT_DW) || \ defined(CONFIG_IMX_WATCHDOG)) hw_watchdog_init(); puts(" Watchdog enabled\n"); diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 68c989aa0b..a14fdabf8d 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -13,7 +13,6 @@ endif obj-$(CONFIG_S5P) += s5p_wdt.o obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o -obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o obj-$(CONFIG_WDT) += wdt-uclass.o obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o @@ -23,6 +22,7 @@ obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o obj-$(CONFIG_WDT_ORION) += orion_wdt.o obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o +obj-$(CONFIG_WDT_DW) += dw_wdt.o obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o obj-$(CONFIG_WDT_MTK) += mtk_wdt.o diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/dw_wdt.c similarity index 100% rename from drivers/watchdog/designware_wdt.c rename to drivers/watchdog/dw_wdt.c diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index d1034ac280..65f02eca2e 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -105,7 +105,7 @@ * L4 Watchdog */ #ifdef CONFIG_HW_WATCHDOG -#define CONFIG_DESIGNWARE_WATCHDOG +#define CONFIG_WDT_DW #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS #define CONFIG_DW_WDT_CLOCK_KHZ 25000 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h index 8d2971c6e2..3582aec822 100644 --- a/include/configs/socfpga_stratix10_socdk.h +++ b/include/configs/socfpga_stratix10_socdk.h @@ -161,7 +161,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void); */ #ifdef CONFIG_SPL_BUILD #define CONFIG_HW_WATCHDOG -#define CONFIG_DESIGNWARE_WATCHDOG +#define CONFIG_WDT_DW #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS #ifndef __ASSEMBLY__ unsigned int cm_get_l4_sys_free_clk_hz(void); diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index e616f7229b..f2453728c6 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -323,7 +323,7 @@ CONFIG_DEFAULT_IMMR CONFIG_DEF_HWCONFIG CONFIG_DELAY_ENVIRONMENT CONFIG_DESIGNWARE_ETH -CONFIG_DESIGNWARE_WATCHDOG +CONFIG_WDT_DW CONFIG_DEVELOP CONFIG_DEVICE_TREE_LIST CONFIG_DFU_ALT
- use dw instead of designware for driver file since Linux following the same. - add CONFIG macro start with CONFIG_WDT since the driver mode wdt drivers follow this. Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Chin-Liang See <clsee@altera.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- common/board_f.c | 2 +- drivers/watchdog/Makefile | 2 +- drivers/watchdog/{designware_wdt.c => dw_wdt.c} | 0 include/configs/socfpga_common.h | 2 +- include/configs/socfpga_stratix10_socdk.h | 2 +- scripts/config_whitelist.txt | 2 +- 6 files changed, 5 insertions(+), 5 deletions(-) rename drivers/watchdog/{designware_wdt.c => dw_wdt.c} (100%)