| Message ID | 20190919052822.10403-6-jagan@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
Am Donnerstag, 19. September 2019, 07:28:21 CEST schrieb Jagan Teki: > It is always better practice to follow regulator naming conventions > as per the schematics for future references. > > This would indeed helpful to review and check the naming convention > directly on schematics, both for the code reviewers and the developers. > > So, rename vcc12v_sys into dc_12v as per rk3399 power tree as per > roc-rk3399-pc schematics. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> applied for 5.5 (with the filename changed to the current one of course) Thanks Heiko
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts index e09bcbdd92f5..51242ea5447d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts @@ -57,9 +57,9 @@ * should be placed inside mp8859, but not until mp8859 has * its own dt-binding. */ - vcc12v_sys: mp8859-dcdc1 { + dc_12v: mp8859-dcdc1 { compatible = "regulator-fixed"; - regulator-name = "vcc12v_sys"; + regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; @@ -85,7 +85,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_sys>; + vin-supply = <&dc_12v>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ @@ -118,7 +118,7 @@ regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_sys>; + vin-supply = <&dc_12v>; }; vdd_log: vdd-log {
It is always better practice to follow regulator naming conventions as per the schematics for future references. This would indeed helpful to review and check the naming convention directly on schematics, both for the code reviewers and the developers. So, rename vcc12v_sys into dc_12v as per rk3399 power tree as per roc-rk3399-pc schematics. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- .../boot/dts/rockchip/rk3399-libretech-roc-rk3399-pc.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)