@@ -1023,6 +1023,12 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
return PTR_ERR(base);
}
+ dsi->regulator = devm_regulator_get(dev, "vcc-dsi");
+ if (IS_ERR(dsi->regulator)) {
+ dev_err(dev, "Couldn't get VCC-DSI supply\n");
+ return PTR_ERR(dsi->regulator);
+ }
+
dsi->regs = devm_regmap_init_mmio_clk(dev, "bus", base,
&sun6i_dsi_regmap_config);
if (IS_ERR(dsi->regs)) {
@@ -1104,6 +1110,13 @@ static int sun6i_dsi_remove(struct platform_device *pdev)
static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev)
{
struct sun6i_dsi *dsi = dev_get_drvdata(dev);
+ int err;
+
+ err = regulator_enable(dsi->regulator);
+ if (err) {
+ dev_err(dsi->dev, "failed to enable VCC-DSI supply: %d\n", err);
+ return err;
+ }
reset_control_deassert(dsi->reset);
if (dsi->variant->has_mod_clk)
@@ -1138,6 +1151,7 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev)
if (dsi->variant->has_mod_clk)
clk_disable_unprepare(dsi->mod_clk);
reset_control_assert(dsi->reset);
+ regulator_disable(dsi->regulator);
return 0;
}
@@ -13,6 +13,8 @@
#include <drm/drm_encoder.h>
#include <drm/drm_mipi_dsi.h>
+#include <linux/regulator/consumer.h>
+
struct sun6i_dphy {
struct clk *bus_clk;
struct clk *mod_clk;
@@ -32,6 +34,7 @@ struct sun6i_dsi {
struct clk *bus_clk;
struct clk *mod_clk;
struct regmap *regs;
+ struct regulator *regulator;
struct reset_control *reset;
struct sun6i_dphy *dphy;
Some boards have VCC-DSI pin connected to voltage regulator which may not be turned on by default. Add support for such boards by adding voltage regulator handling code to MIPI DSI driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++++++++ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 3 +++ 2 files changed, 17 insertions(+)