[7/8] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
diff mbox series

Message ID 20191230120409.884-8-jagan@amarulasolutions.com
State New
Headers show
Series
  • i.MX6: Engicam fixes/updates
Related show

Commit Message

Jagan Teki Dec. 30, 2019, 12:04 p.m. UTC 
From: Michael Trimarchi <michael@amarulasolutions.com>

Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.

So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/dts/imx6qdl-icore-1.5.dtsi | 2 --
 1 file changed, 2 deletions(-)

Patch
diff mbox series 

diff --git a/arch/arm/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/dts/imx6qdl-icore-1.5.dtsi
index d91d46b589..0fd7f2e24d 100644
--- a/arch/arm/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/dts/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@ 
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET_REF>;
-	phy-mode = "rmii";
 	status = "okay";
 };