mbox series

[V4,0/5] MXS nand fixes in SPL

Message ID 20220515093534.1737172-1-michael@amarulasolutions.com
Headers
Series MXS nand fixes in SPL |

Message

Michael Trimarchi May 15, 2022, 9:35 a.m. UTC 
Those patches come after some testing of failing in factory on some
unit. We found out that the bootrom imx loader was not able to handling
badblock. This can be a limit of the implementation right now in imx8mn.
Anyway not all the imx platform has the support of this loader. I found
some problems on the implementation so I have fixed it up according the
experience of Sitara (coming from Dario). I tested only using a Fit Image as a flash
container. This version add in the series the fix of cmd_nandbcb and
the fix of spl_nand load. I can imagine that a lot of boards and users
are affected. I have started to backport this changes in some older
uboot and adapt it. Move BSH board using the spl loading instead
the romapi

Michael Trimarchi (5):
  nand: raw: mxs_nand: Fix specific hook registration
  mtd: nand: mxs_nand_spl: Fix bad block skipping
  arm: mach-imx: cmd_nandbcb fix bad block handling
  spl: spl_nand: Fix bad block handling in fitImage
  board: bsh: Switch to nand spl load instead of romapi

 arch/arm/mach-imx/cmd_nandbcb.c     | 21 +++----
 board/bsh/imx8mn_smm_s2/spl.c       |  3 +
 common/spl/spl_nand.c               |  5 +-
 drivers/mtd/nand/raw/mxs_nand.c     | 32 +++++-----
 drivers/mtd/nand/raw/mxs_nand_spl.c | 90 ++++++++++++++++-------------
 5 files changed, 76 insertions(+), 75 deletions(-)

Comments

Fabio Estevam May 15, 2022, 12:54 p.m. UTC | #1 
On Sun, May 15, 2022 at 6:35 AM Michael Trimarchi
<michael@amarulasolutions.com> wrote:
>
> Those patches come after some testing of failing in factory on some
> unit. We found out that the bootrom imx loader was not able to handling
> badblock. This can be a limit of the implementation right now in imx8mn.
> Anyway not all the imx platform has the support of this loader. I found
> some problems on the implementation so I have fixed it up according the
> experience of Sitara (coming from Dario). I tested only using a Fit Image as a flash
> container. This version add in the series the fix of cmd_nandbcb and
> the fix of spl_nand load. I can imagine that a lot of boards and users
> are affected. I have started to backport this changes in some older
> uboot and adapt it. Move BSH board using the spl loading instead
> the romapi
>
> Michael Trimarchi (5):
>   nand: raw: mxs_nand: Fix specific hook registration
>   mtd: nand: mxs_nand_spl: Fix bad block skipping
>   arm: mach-imx: cmd_nandbcb fix bad block handling
>   spl: spl_nand: Fix bad block handling in fitImage
>   board: bsh: Switch to nand spl load instead of romapi

For the series:

Reviewed-by: Fabio Estevam <festevam@denx.de>