Show patches with: Submitter = Michael Trimarchi       |    State = Action Required       |    Archived = No       |   262 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[V2,2/3] net: phy: DP83822: enable rgmii/rmmi mode according to phy interface mode [V2,1/3] net: phy: DP83822: Clean up config_init code - - 1 0 0 0 2022-05-22 Michael Trimarchi New
[V2,1/3] net: phy: DP83822: Clean up config_init code [V2,1/3] net: phy: DP83822: Clean up config_init code - - - 0 0 0 2022-05-22 Michael Trimarchi New
[3/3] net: phy: DP83822: check for supported interface modes in config_init [1/3] net: phy: DP83822: Clean up config_init code - - - 0 0 0 2022-05-22 Michael Trimarchi New
[2/3] net: phy: DP83822: enable rgmii/rmmi mode according to phy interface mode [1/3] net: phy: DP83822: Clean up config_init code - - 1 0 0 0 2022-05-22 Michael Trimarchi New
[1/3] net: phy: DP83822: Clean up config_init code [1/3] net: phy: DP83822: Clean up config_init code - - - 0 0 0 2022-05-22 Michael Trimarchi New
[V2] include/configs: Remove rootwait=1 to all the affected boards [V2] include/configs: Remove rootwait=1 to all the affected boards - 1 - 0 0 0 2022-05-22 Michael Trimarchi New
include/configs: Remove rootwait=1 to all the affected boards include/configs: Remove rootwait=1 to all the affected boards - 1 - 0 0 0 2022-05-20 Michael Trimarchi New
[V2] arm: dts: imx6ulz-bsh-smm-m2: Support proper board power off [V2] arm: dts: imx6ulz-bsh-smm-m2: Support proper board power off - 1 - 0 0 0 2022-05-17 Michael Trimarchi New
arm: dts: imx6ulz-bsh-smm-m2: Support proper board power off arm: dts: imx6ulz-bsh-smm-m2: Support proper board power off - - - 0 0 0 2022-05-17 Michael Trimarchi New
imx: imx8mn_smm_s2/s2pro: Enable TrustZone imx: imx8mn_smm_s2/s2pro: Enable TrustZone - - - 0 0 0 2022-05-15 Michael Trimarchi New
[V4,5/5] board: bsh: Switch to nand spl load instead of romapi MXS nand fixes in SPL - - - 0 0 0 2022-05-15 Michael Trimarchi New
[V4,4/5] spl: spl_nand: Fix bad block handling in fitImage MXS nand fixes in SPL - 1 1 0 0 0 2022-05-15 Michael Trimarchi New
[V4,3/5] arm: mach-imx: cmd_nandbcb fix bad block handling MXS nand fixes in SPL 1 - 1 0 0 0 2022-05-15 Michael Trimarchi New
[V4,2/5] mtd: nand: mxs_nand_spl: Fix bad block skipping MXS nand fixes in SPL 1 - 1 0 0 0 2022-05-15 Michael Trimarchi New
[V4,1/5] nand: raw: mxs_nand: Fix specific hook registration MXS nand fixes in SPL 1 - 1 0 0 0 2022-05-15 Michael Trimarchi New
[V3,5/5] board: bsh: Switch to nand spl load instead of romapi Untitled series #363 - - - 0 0 0 2022-05-15 Michael Trimarchi New
[5/5] board: bsh: Switch to nand spl load instead of romapi MXS nand fixes in SPL - - - 0 0 0 2022-05-15 Michael Trimarchi New
[V3,4/5] spl: spl_nand: Fix bad block handling in fitImage MXS nand fixes in SPL - 1 1 0 0 0 2022-05-15 Michael Trimarchi New
[V3,3/5] arm: mach-imx: cmd_nandbcb fix bad block handling MXS nand fixes in SPL 1 - 1 0 0 0 2022-05-15 Michael Trimarchi New
[V3,2/5] mtd: nand: mxs_nand_spl: Fix bad block skipping MXS nand fixes in SPL 1 - 1 0 0 0 2022-05-15 Michael Trimarchi New
[V3,1/5] nand: raw: mxs_nand: Fix specific hook registration MXS nand fixes in SPL 1 - 1 0 0 0 2022-05-15 Michael Trimarchi New
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards - - - 0 0 0 2021-11-18 Michael Trimarchi New
[V2] cmd_nandbcb: Support secondary boot address of imx8mn [V2] cmd_nandbcb: Support secondary boot address of imx8mn - - - 0 0 0 2021-11-18 Michael Trimarchi New
[RFC] imx8m: Drop env_get_location for imx8mn and imx8mp [RFC] imx8m: Drop env_get_location for imx8mn and imx8mp - - - 0 0 0 2021-11-18 Michael Trimarchi New
imx8m: Drop unused function env_get_offset imx8m: Drop unused function env_get_offset - 1 - 0 0 0 2021-11-17 Michael Trimarchi New
[V3] arm: dts: imx8ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster [V3] arm: dts: imx8ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster - - - 0 0 0 2021-11-17 Michael Trimarchi New
[V2] arm: dts: imx8ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster [V2] arm: dts: imx8ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster - - - 0 0 0 2021-11-17 Michael Trimarchi New
configs: imx8mn_bsh_smm_s2: Add nand enviroment support configs: imx8mn_bsh_smm_s2: Add nand enviroment support - - - 0 0 0 2021-11-16 Michael Trimarchi New
arm: dts: imx8ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster arm: dts: imx8ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster - - - 0 0 0 2021-11-16 Michael Trimarchi New
cmd_nandbcb: Support secondary boot address of imx8mn cmd_nandbcb: Support secondary boot address of imx8mn - - - 0 0 0 2021-11-15 Michael Trimarchi New
cmd_nandbcb: Support secondary boot address of imx8mn cmd_nandbcb: Support secondary boot address of imx8mn - - - 0 0 0 2021-11-15 Michael Trimarchi New
[2/2] configs: imx8mn_bsh_smm_s2: Add nand enviroment support [1/2] cmd_nandbcb: Support secondary boot address of imx8mn - - - 0 0 0 2021-11-15 Michael Trimarchi New
[1/2] cmd_nandbcb: Support secondary boot address of imx8mn [1/2] cmd_nandbcb: Support secondary boot address of imx8mn - - - 0 0 0 2021-11-15 Michael Trimarchi New
[2/2] imx8mn_bsh_smm_s2: Add legacy option nandfit_part [1/2] configs: imx8mn_bsh_smm_s2: Add nand enviroment support - - - 0 0 0 2021-11-15 Michael Trimarchi New
[1/2] configs: imx8mn_bsh_smm_s2: Add nand enviroment support [1/2] configs: imx8mn_bsh_smm_s2: Add nand enviroment support - - - 0 0 0 2021-11-15 Michael Trimarchi New
[11/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01 [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[10/11] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[09/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[08/11] drm/panel: Add Ilitek ILI9805 panel driver [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[07/11] dt-bindings: display: panel: Add synaptics r63353 panel controller [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[06/11] drm/panel: Add Synaptics R63353 panel driver [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[05/11] arm64: dts: imx8mn-bsh-smm2-pro: Register sound-tlv320aic31xx audio card [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[04/11] ASoC: fsl: add smm-s2-pro audio driver [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[03/11] soc: codecs: tlv320aic31xx: Add support for external optional clock mclk [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[02/11] sound: soc: tlv320aic31xx: add rate divs for 12288000Hz [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
[01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module [01/11] arm: dts: imx8ulz-smm-m2: Add BSH SMM-M2 IMX6ULZ System on Module - - - 0 0 0 2021-11-11 Michael Trimarchi New
bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards - - - 0 0 0 2021-11-11 Michael Trimarchi New
[V2,3/3] arm64: dts: imx8mn-bsh-smm-s2pro: Adjust audio card name to new one [V2,1/3] ASoC: fsl: add smm-s2-pro audio driver - - - 0 0 0 2021-11-08 Michael Trimarchi New
[V2,2/3] arm64: dts: imx8mn-bsh-smm-s2-common: Fix the voltage of buck5 and buck4 [V2,1/3] ASoC: fsl: add smm-s2-pro audio driver - - - 0 0 0 2021-11-08 Michael Trimarchi New
[V2,1/3] ASoC: fsl: add smm-s2-pro audio driver [V2,1/3] ASoC: fsl: add smm-s2-pro audio driver - - - 0 0 0 2021-11-08 Michael Trimarchi New
[3/3] arm64: dts: imx8mn-bsh-smm-s2pro: Adjust audio card name to new one [1/3] ASoC: fsl: add smm-s2-pro audio driver - - - 0 0 0 2021-11-08 Michael Trimarchi New
[2/3] arm64: dts: imx8mn-bsh-smm-s2-common: Fix the voltage of buck5 and buck4 [1/3] ASoC: fsl: add smm-s2-pro audio driver - - - 0 0 0 2021-11-08 Michael Trimarchi New
[1/3] ASoC: fsl: add smm-s2-pro audio driver [1/3] ASoC: fsl: add smm-s2-pro audio driver - - - 0 0 0 2021-11-08 Michael Trimarchi New
ASoC: fsl: add smm-s2-pro audio driver ASoC: fsl: add smm-s2-pro audio driver - - - 0 0 0 2021-11-06 Michael Trimarchi New
[V2] board: avnet: Add imx8mm sm2s SoM reference board [V2] board: avnet: Add imx8mm sm2s SoM reference board - - - 0 0 0 2020-01-12 Michael Trimarchi New
arm: Add arm handoff header file arm: Add arm handoff header file - 1 - 0 0 0 2020-01-05 Michael Trimarchi New
[2/2] crypto: caam - add clock entry for i.MX8MM [1/2] arm64: dts: imx8mm: Add CAAM node - - - 0 0 0 2020-01-01 Michael Trimarchi New
[1/2] arm64: dts: imx8mm: Add CAAM node [1/2] arm64: dts: imx8mm: Add CAAM node - - - 0 0 0 2020-01-01 Michael Trimarchi New
arm64: dts: imx8mm: Add UART1 UART1_DCE_RTS/CTS pin's mux option #4 arm64: dts: imx8mm: Add UART1 UART1_DCE_RTS/CTS pin's mux option #4 - - - 0 0 0 2020-01-01 Michael Trimarchi New
[3/3] arm64: dts: imx8mm: properly describe IRQ hierarchy Add initial support for iMX8MM power domain - - - 0 0 0 2020-01-01 Michael Trimarchi New
[2/3] irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MM compatible Add initial support for iMX8MM power domain - - - 0 0 0 2020-01-01 Michael Trimarchi New
[1/3] soc: imx: gpcv2: add support for i.MX8MM SoC Add initial support for iMX8MM power domain - - - 0 0 0 2020-01-01 Michael Trimarchi New
« 1 2 3 »