[v6,1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig

2353 diff mbox series

BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.

Board support package includes the following components:
- mainline Linux kernel 5.19.7
- mainline U-Boot 2022-07
- default packages from buildroot

Patches applied to the Linux kernel and U-Boot have been submitted but
not merged yet.

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
The smm s2 board is basically the same as the pro except it boots from
NAND instead of eMMC.

Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v5)

Changes in v5:
- Update the commit description.
- Bump the kernel version to 5.19.7.
- Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch
  patch.
- Regenerate all added patches (Linux kernel and U-boot) so that they contain
  the [PATCH] header without numbering.
- Add patchwork link to U-boot patch.

Changes in v4:
- Update the commit description.
- Bump the kernel version to 5.18.19.
- Shrink the Linux configuration.
- Add 3 dashes to the kernel patches to avoid having the version history
  to fall into the final commit log.
- Add lore.kernel.org links to the submitted patches.
- Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch
  to the kernel.

Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.

Changes in v2:
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has
  been reviewed. This is the most up-to-date version.
- Replace `Co-developed-by:' tag with `Co-authored-by'.
- Use the buildroot's output directory if the binaries directory is
  not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and
  a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
 DEVELOPERS                                    |   4 +
 board/bsh/imx8mn-bsh-smm-s2/flash.sh          |  26 +
 board/bsh/imx8mn-bsh-smm-s2/linux.fragment    | 895 ++++++++++++++++++
 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst     |  29 +
 ...ine-mxs-use-platform_driver_register.patch |  45 +
 ...2-dmaengine-mxs-fix-section-mismatch.patch |  39 +
 ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++
 board/bsh/imx8mn-bsh-smm-s2/post-build.sh     |   4 +
 board/bsh/imx8mn-bsh-smm-s2/readme.txt        |  75 ++
 configs/imx8mn_bsh_smm_s2_defconfig           |  40 +
 10 files changed, 1317 insertions(+)
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
 create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
 create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
 create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig

Hi Giulio,

On Fri, Sep 9, 2022 at 3:33 PM Giulio Benetti
<giulio.benetti@benettiengineering.com> wrote:
>
> Hi Dario,
>
> > Il giorno 9 set 2022, alle ore 14:56, Dario Binacchi <dario.binacchi@amarulasolutions.com> ha scritto:
> >
> > BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
> > input and output interfaces to a dedicated carrier board. It is designed
> > mainly to provide graphical/video and connectivity interfaces to the
> > appliance.
> >
> > Board support package includes the following components:
> > - mainline Linux kernel 5.19.7
> > - mainline U-Boot 2022-07
> > - default packages from buildroot
> >
> > Patches applied to the Linux kernel and U-Boot have been submitted but
> > not merged yet.
> >
> > https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
> > The smm s2 board is basically the same as the pro except it boots from
> > NAND instead of eMMC.
> >
> > Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
> > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>
> You’ve forgotten my:
> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

Yes, you are right.
I'll upload a new series with the two review tags.

Thanks and regards,
Dario
>
> Also, remember Patchwork :-)
>
> Best regards
> Giulio
>
> > ---
> > (no changes since v5)
> >
> > Changes in v5:
> > - Update the commit description.
> > - Bump the kernel version to 5.19.7.
> > - Remove the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch
> >  patch.
> > - Regenerate all added patches (Linux kernel and U-boot) so that they contain
> >  the [PATCH] header without numbering.
> > - Add patchwork link to U-boot patch.
> >
> > Changes in v4:
> > - Update the commit description.
> > - Bump the kernel version to 5.18.19.
> > - Shrink the Linux configuration.
> > - Add 3 dashes to the kernel patches to avoid having the version history
> >  to fall into the final commit log.
> > - Add lore.kernel.org links to the submitted patches.
> > - Apply the 0003-Revert-Revert-mtd-rawnand-gpmi-Fix-setting-busy-time.patch
> >  to the kernel.
> >
> > Changes in v3:
> > - Update the commit description.
> > - Bump U-Boot to version 2022-07.
> > - Remove U-Boot patches merged in version 2022-07.
> > - Update the Linux patches.
> >
> > Changes in v2:
> > - Change commit subject and description.
> > - Update linux patch to version 4. It hasn't been merged yet but has
> >  been reviewed. This is the most up-to-date version.
> > - Replace `Co-developed-by:' tag with `Co-authored-by'.
> > - Use the buildroot's output directory if the binaries directory is
> >  not passed as a parameter to the `flash.sh' script.
> > - Replace the linux.config file with an architectural defconfig and
> >  a config fragment for the changes.
> > - Remove useless and deprecated statements in nand-full.lst.
> > - Remove the buildroot configurations for ext2/ext4 filesystem creation.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> > DEVELOPERS                                    |   4 +
> > board/bsh/imx8mn-bsh-smm-s2/flash.sh          |  26 +
> > board/bsh/imx8mn-bsh-smm-s2/linux.fragment    | 895 ++++++++++++++++++
> > board/bsh/imx8mn-bsh-smm-s2/nand-full.lst     |  29 +
> > ...ine-mxs-use-platform_driver_register.patch |  45 +
> > ...2-dmaengine-mxs-fix-section-mismatch.patch |  39 +
> > ...Remove-rootwait-1-to-all-the-affecte.patch | 160 ++++
> > board/bsh/imx8mn-bsh-smm-s2/post-build.sh     |   4 +
> > board/bsh/imx8mn-bsh-smm-s2/readme.txt        |  75 ++
> > configs/imx8mn_bsh_smm_s2_defconfig           |  40 +
> > 10 files changed, 1317 insertions(+)
> > create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> > create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
> > create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
> >
> > diff --git a/DEVELOPERS b/DEVELOPERS
> > index d2bd0d809a6a..d63cb22cce1d 100644
> > --- a/DEVELOPERS
> > +++ b/DEVELOPERS
> > @@ -673,6 +673,8 @@ F:    package/luaexpat/
> > F:    package/xinetd/
> >
> > N:    Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +F:    board/bsh/
> > +F:    configs/imx8mn_bsh_smm_s2_defconfig
> > F:    package/uuu/
> >
> > N:    Dario Binacchi <dariobin@libero.it>
> > @@ -2104,6 +2106,8 @@ F:    package/python-crc16/
> > F:    package/python-pyzmq/
> >
> > N:    Michael Trimarchi <michael@amarulasolutions.com>
> > +F:    board/bsh/
> > +F:    configs/imx8mn_bsh_smm_s2_defconfig
> > F:    package/python-spidev/
> >
> > N:    Michael Vetter <jubalh@iodoru.org>
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/flash.sh b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
> > new file mode 100755
> > index 000000000000..1f343d516dcf
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
> > @@ -0,0 +1,26 @@
> > +#!/bin/bash
> > +
> > +if [ $# -eq 0 ]; then
> > +    OUTPUT_DIR=output
> > +else
> > +    OUTPUT_DIR=$1
> > +fi
> > +
> > +if ! test -d "${OUTPUT_DIR}" ; then
> > +    echo "ERROR: no output directory specified."
> > +    echo "Usage: $0 OUTPUT_DIR"
> > +    echo ""
> > +    echo "Arguments:"
> > +    echo "    OUTPUT_DIR    The Buildroot output directory."
> > +    exit 1
> > +fi
> > +
> > +IMAGES_DIR=${OUTPUT_DIR}/images
> > +
> > +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \
> > +  ${IMAGES_DIR}/flash.bin \
> > +  ${IMAGES_DIR}/flash.bin \
> > +  ${IMAGES_DIR}/rootfs.ubifs \
> > +  ${IMAGES_DIR}/Image \
> > +  ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> > new file mode 100644
> > index 000000000000..80803ab08886
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> > @@ -0,0 +1,895 @@
> > +# CONFIG_BPF_SYSCALL is not set
> > +CONFIG_TASK_DELAY_ACCT=y
> > +CONFIG_CGROUP_FREEZER=y
> > +# CONFIG_CGROUP_BPF is not set
> > +CONFIG_RELAY=y
> > +# CONFIG_ARCH_ACTIONS is not set
> > +# CONFIG_ARCH_SUNXI is not set
> > +# CONFIG_ARCH_ALPINE is not set
> > +# CONFIG_ARCH_APPLE is not set
> > +# CONFIG_ARCH_BCM2835 is not set
> > +# CONFIG_ARCH_BCM4908 is not set
> > +# CONFIG_ARCH_BCM_IPROC is not set
> > +# CONFIG_ARCH_BERLIN is not set
> > +# CONFIG_ARCH_BRCMSTB is not set
> > +# CONFIG_ARCH_EXYNOS is not set
> > +# CONFIG_ARCH_K3 is not set
> > +# CONFIG_ARCH_LAYERSCAPE is not set
> > +# CONFIG_ARCH_LG1K is not set
> > +# CONFIG_ARCH_HISI is not set
> > +# CONFIG_ARCH_KEEMBAY is not set
> > +# CONFIG_ARCH_MEDIATEK is not set
> > +# CONFIG_ARCH_MESON is not set
> > +# CONFIG_ARCH_MVEBU is not set
> > +# CONFIG_ARCH_QCOM is not set
> > +# CONFIG_ARCH_RENESAS is not set
> > +# CONFIG_ARCH_ROCKCHIP is not set
> > +# CONFIG_ARCH_S32 is not set
> > +# CONFIG_ARCH_SEATTLE is not set
> > +# CONFIG_ARCH_INTEL_SOCFPGA is not set
> > +# CONFIG_ARCH_SYNQUACER is not set
> > +# CONFIG_ARCH_TEGRA is not set
> > +# CONFIG_ARCH_TESLA_FSD is not set
> > +# CONFIG_ARCH_SPRD is not set
> > +# CONFIG_ARCH_THUNDER is not set
> > +# CONFIG_ARCH_THUNDER2 is not set
> > +# CONFIG_ARCH_UNIPHIER is not set
> > +# CONFIG_ARCH_VEXPRESS is not set
> > +# CONFIG_ARCH_VISCONTI is not set
> > +# CONFIG_ARCH_XGENE is not set
> > +# CONFIG_ARCH_ZYNQMP is not set
> > +# CONFIG_KEXEC is not set
> > +# CONFIG_KEXEC_FILE is not set
> > +# CONFIG_XEN is not set
> > +# CONFIG_ARM64_PTR_AUTH is not set
> > +# CONFIG_ARM64_TLB_RANGE is not set
> > +# CONFIG_ARM64_MTE is not set
> > +CONFIG_PM_DEBUG=y
> > +CONFIG_PM_TEST_SUSPEND=y
> > +# CONFIG_HIBERNATION is not set
> > +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> > +CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> > +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> > +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
> > +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> > +# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
> > +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
> > +CONFIG_ARM_IMX_CPUFREQ_DT=y
> > +# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
> > +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
> > +# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
> > +# CONFIG_ARM_SCMI_CPUFREQ is not set
> > +# CONFIG_ARM_TEGRA186_CPUFREQ is not set
> > +# CONFIG_ARM_MEDIATEK_CPUFREQ is not set
> > +# CONFIG_QORIQ_CPUFREQ is not set
> > +# CONFIG_ACPI_APEI_PCIEAER is not set
> > +# CONFIG_VIRTUALIZATION is not set
> > +# CONFIG_KVM is not set
> > +# CONFIG_GCC_PLUGINS is not set
> > +CONFIG_IPV6=y
> > +CONFIG_MODVERSIONS=y
> > +CONFIG_IPV6_SIT=m
> > +CONFIG_NET_DSA_TAG_OCELOT=m
> > +CONFIG_VLAN_8021Q=y
> > +CONFIG_LLC2=y
> > +CONFIG_NET_SCH_MULTIQ=m
> > +CONFIG_NET_CLS_TCINDEX=m
> > +CONFIG_NET_PKTGEN=m
> > +CONFIG_BT=y
> > +CONFIG_BT_RFCOMM=y
> > +CONFIG_BT_RFCOMM_TTY=y
> > +CONFIG_BT_BNEP=y
> > +CONFIG_BT_BNEP_MC_FILTER=y
> > +CONFIG_BT_BNEP_PROTO_FILTER=y
> > +CONFIG_BT_HIDP=y
> > +# CONFIG_CAN_RCAR is not set
> > +# CONFIG_CAN_RCAR_CANFD is not set
> > +# CONFIG_CAN_MCP251XFD is not set
> > +CONFIG_BT_HCIUART=y
> > +CONFIG_BT_HCIUART_BCSP=y
> > +CONFIG_BT_HCIUART_ATH3K=y
> > +CONFIG_BT_HCIUART_3WIRE=y
> > +CONFIG_BT_HCIVHCI=y
> > +CONFIG_CFG80211=y
> > +CONFIG_NL80211_TESTMODE=y
> > +CONFIG_CFG80211_WEXT=y
> > +CONFIG_MAC80211=y
> > +# CONFIG_BT_HCIUART_MRVL is not set
> > +# CONFIG_BT_MRVL is not set
> > +# CONFIG_BT_MRVL_SDIO is not set
> > +# CONFIG_BT_QCOMSMD is not set
> > +# CONFIG_RFKILL is not set
> > +# CONFIG_PCI is not set
> > +# CONFIG_PCIEPORTBUS is not set
> > +# CONFIG_PCIEAER is not set
> > +# CONFIG_PCI_IOV is not set
> > +# CONFIG_PCI_PASID is not set
> > +# CONFIG_HOTPLUG_PCI is not set
> > +# CONFIG_HOTPLUG_PCI_ACPI is not set
> > +# CONFIG_PCI_AARDVARK is not set
> > +# CONFIG_PCI_TEGRA is not set
> > +# CONFIG_PCIE_RCAR_HOST is not set
> > +# CONFIG_PCIE_RCAR_EP is not set
> > +# CONFIG_PCI_HOST_GENERIC is not set
> > +# CONFIG_PCI_XGENE is not set
> > +# CONFIG_PCIE_ALTERA is not set
> > +# CONFIG_PCIE_ALTERA_MSI is not set
> > +# CONFIG_PCI_HOST_THUNDER_PEM is not set
> > +# CONFIG_PCI_HOST_THUNDER_ECAM is not set
> > +# CONFIG_PCIE_ROCKCHIP_HOST is not set
> > +# CONFIG_PCIE_BRCMSTB is not set
> > +# CONFIG_PCI_IMX6 is not set
> > +# CONFIG_PCI_LAYERSCAPE is not set
> > +# CONFIG_PCI_HISI is not set
> > +# CONFIG_PCIE_QCOM is not set
> > +# CONFIG_PCIE_ARMADA_8K is not set
> > +# CONFIG_PCIE_KIRIN is not set
> > +# CONFIG_PCIE_HISI_STB is not set
> > +# CONFIG_PCIE_TEGRA194_HOST is not set
> > +# CONFIG_PCIE_VISCONTI_HOST is not set
> > +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
> > +# CONFIG_PCI_ENDPOINT is not set
> > +# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
> > +# CONFIG_PCI_EPF_TEST is not set
> > +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
> > +CONFIG_BRCMSTB_GISB_ARB=y
> > +CONFIG_VEXPRESS_CONFIG=y
> > +# CONFIG_HISILICON_LPC is not set
> > +# CONFIG_TEGRA_ACONNECT is not set
> > +# CONFIG_RASPBERRYPI_FIRMWARE is not set
> > +# CONFIG_INTEL_STRATIX10_SERVICE is not set
> > +# CONFIG_INTEL_STRATIX10_RSU is not set
> > +CONFIG_IMX_DSP=y
> > +# CONFIG_GNSS is not set
> > +# CONFIG_GNSS_MTK_SERIAL is not set
> > +CONFIG_MTD_CMDLINE_PARTS=y
> > +# CONFIG_MTD_NAND_BRCMNAND is not set
> > +CONFIG_MTD_NAND_GPMI_NAND=y
> > +# CONFIG_MTD_NAND_MARVELL is not set
> > +# CONFIG_MTD_NAND_FSL_IFC is not set
> > +# CONFIG_MTD_NAND_QCOM is not set
> > +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> > +CONFIG_MTD_UBI=y
> > +# CONFIG_BLK_DEV_NVME is not set
> > +# CONFIG_PCI_ENDPOINT_TEST is not set
> > +CONFIG_RAID_ATTRS=m
> > +# CONFIG_SCSI_HISI_SAS_PCI is not set
> > +# CONFIG_MEGARAID_SAS is not set
> > +# CONFIG_SCSI_MPT3SAS is not set
> > +# CONFIG_SCSI_UFS_QCOM is not set
> > +# CONFIG_SCSI_UFS_HISI is not set
> > +# CONFIG_SCSI_UFS_EXYNOS is not set
> > +# CONFIG_SATA_AHCI is not set
> > +CONFIG_AHCI_IMX=y
> > +# CONFIG_AHCI_BRCM is not set
> > +# CONFIG_AHCI_MVEBU is not set
> > +# CONFIG_SATA_SIL24 is not set
> > +# CONFIG_SATA_RCAR is not set
> > +CONFIG_DM_CRYPT=m
> > +# CONFIG_NET_DSA_BCM_SF2 is not set
> > +# CONFIG_NET_DSA_MSCC_FELIX is not set
> > +# CONFIG_NET_XGENE is not set
> > +# CONFIG_ATL1C is not set
> > +# CONFIG_SYSTEMPORT is not set
> > +# CONFIG_BNX2X is not set
> > +# CONFIG_THUNDER_NIC_PF is not set
> > +CONFIG_FSL_XGMAC_MDIO=y
> > +CONFIG_FSL_ENETC_IERB=y
> > +# CONFIG_FSL_FMAN is not set
> > +# CONFIG_FSL_DPAA_ETH is not set
> > +# CONFIG_FSL_DPAA2_ETH is not set
> > +# CONFIG_FSL_ENETC is not set
> > +# CONFIG_FSL_ENETC_VF is not set
> > +# CONFIG_FSL_ENETC_QOS is not set
> > +CONFIG_MVMDIO=y
> > +CONFIG_MSCC_OCELOT_SWITCH=m
> > +# CONFIG_HNS3 is not set
> > +# CONFIG_HNS3_HCLGE is not set
> > +# CONFIG_HNS3_ENET is not set
> > +# CONFIG_E1000 is not set
> > +# CONFIG_E1000E is not set
> > +# CONFIG_IGB is not set
> > +# CONFIG_IGBVF is not set
> > +# CONFIG_MVNETA is not set
> > +# CONFIG_MVPP2 is not set
> > +# CONFIG_SKY2 is not set
> > +# CONFIG_MLX4_EN is not set
> > +# CONFIG_MLX5_CORE is not set
> > +# CONFIG_MLX5_CORE_EN is not set
> > +# CONFIG_R8169 is not set
> > +# CONFIG_SH_ETH is not set
> > +# CONFIG_RAVB is not set
> > +CONFIG_STMMAC_ETH=y
> > +CONFIG_DWMAC_GENERIC=m
> > +CONFIG_MICROCHIP_PHY=y
> > +CONFIG_NXP_TJA11XX_PHY=y
> > +CONFIG_MDIO_BITBANG=y
> > +# CONFIG_SNI_AVE is not set
> > +# CONFIG_SNI_NETSEC is not set
> > +# CONFIG_TI_K3_AM65_CPSW_NUSS is not set
> > +# CONFIG_QCOM_IPA is not set
> > +# CONFIG_MESON_GXL_PHY is not set
> > +# CONFIG_AQUANTIA_PHY is not set
> > +# CONFIG_BCM54140_PHY is not set
> > +# CONFIG_MARVELL_PHY is not set
> > +# CONFIG_MARVELL_10G_PHY is not set
> > +# CONFIG_MICREL_PHY is not set
> > +# CONFIG_MICROSEMI_PHY is not set
> > +# CONFIG_AT803X_PHY is not set
> > +# CONFIG_REALTEK_PHY is not set
> > +# CONFIG_ROCKCHIP_PHY is not set
> > +# CONFIG_DP83867_PHY is not set
> > +# CONFIG_VITESSE_PHY is not set
> > +# CONFIG_USB_BRCMSTB is not set
> > +CONFIG_USB_RTL8152=y
> > +CONFIG_USB_USBNET=y
> > +CONFIG_BRCMFMAC=y
> > +CONFIG_HOSTAP=y
> > +# CONFIG_ATH10K is not set
> > +# CONFIG_ATH10K_PCI is not set
> > +# CONFIG_ATH10K_SNOC is not set
> > +# CONFIG_WCN36XX is not set
> > +# CONFIG_MWIFIEX is not set
> > +# CONFIG_MWIFIEX_SDIO is not set
> > +# CONFIG_MWIFIEX_PCIE is not set
> > +CONFIG_KEYBOARD_SNVS_PWRKEY=y
> > +# CONFIG_KEYBOARD_IMX_SC_KEY is not set
> > +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
> > +# CONFIG_INPUT_PM8941_PWRKEY is not set
> > +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
> > +# CONFIG_INPUT_PWM_BEEPER is not set
> > +# CONFIG_INPUT_PWM_VIBRA is not set
> > +# CONFIG_INPUT_HISI_POWERKEY is not set
> > +# CONFIG_SERIAL_8250_BCM2835AUX is not set
> > +# CONFIG_SERIAL_8250_OMAP is not set
> > +# CONFIG_SERIAL_8250_MT6577 is not set
> > +# CONFIG_SERIAL_8250_UNIPHIER is not set
> > +# CONFIG_SERIAL_MESON is not set
> > +# CONFIG_SERIAL_MESON_CONSOLE is not set
> > +# CONFIG_SERIAL_SAMSUNG is not set
> > +# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
> > +# CONFIG_SERIAL_TEGRA is not set
> > +# CONFIG_SERIAL_TEGRA_TCU is not set
> > +# CONFIG_SERIAL_SH_SCI is not set
> > +# CONFIG_SERIAL_MSM is not set
> > +# CONFIG_SERIAL_MSM_CONSOLE is not set
> > +# CONFIG_SERIAL_QCOM_GENI is not set
> > +# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set
> > +# CONFIG_SERIAL_MVEBU_UART is not set
> > +# CONFIG_SERIAL_OWL is not set
> > +# CONFIG_I2C_MUX is not set
> > +# CONFIG_I2C_BCM2835 is not set
> > +# CONFIG_I2C_MESON is not set
> > +# CONFIG_I2C_MT65XX is not set
> > +# CONFIG_I2C_MV64XXX is not set
> > +# CONFIG_I2C_OMAP is not set
> > +# CONFIG_I2C_OWL is not set
> > +# CONFIG_I2C_PXA is not set
> > +# CONFIG_I2C_QCOM_CCI is not set
> > +# CONFIG_I2C_QCOM_GENI is not set
> > +# CONFIG_I2C_QUP is not set
> > +# CONFIG_I2C_RIIC is not set
> > +# CONFIG_I2C_S3C2410 is not set
> > +# CONFIG_I2C_SH_MOBILE is not set
> > +# CONFIG_I2C_TEGRA is not set
> > +# CONFIG_I2C_UNIPHIER_F is not set
> > +# CONFIG_I2C_RCAR is not set
> > +# CONFIG_SPI_ARMADA_3700 is not set
> > +# CONFIG_SPI_BCM2835 is not set
> > +# CONFIG_SPI_BCM2835AUX is not set
> > +# CONFIG_SPI_DESIGNWARE is not set
> > +# CONFIG_SPI_DW_DMA is not set
> > +# CONFIG_SPI_DW_MMIO is not set
> > +CONFIG_SPI_IMX=y
> > +# CONFIG_SPI_FSL_DSPI is not set
> > +# CONFIG_SPI_MESON_SPICC is not set
> > +# CONFIG_SPI_MESON_SPIFC is not set
> > +# CONFIG_SPI_ORION is not set
> > +CONFIG_SPI_SPIDEV=y
> > +CONFIG_SPI_SLAVE=y
> > +CONFIG_SPI_SLAVE_TIME=y
> > +CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
> > +CONFIG_PINCTRL=y
> > +# CONFIG_SPI_RPCIF is not set
> > +# CONFIG_SPI_RSPI is not set
> > +# CONFIG_SPI_QCOM_QSPI is not set
> > +# CONFIG_SPI_QUP is not set
> > +# CONFIG_SPI_QCOM_GENI is not set
> > +# CONFIG_SPI_S3C64XX is not set
> > +# CONFIG_SPI_SH_MSIOF is not set
> > +# CONFIG_SPI_SUN6I is not set
> > +# CONFIG_SPMI is not set
> > +# CONFIG_PINCTRL_OWL is not set
> > +# CONFIG_PINCTRL_S700 is not set
> > +# CONFIG_PINCTRL_S900 is not set
> > +CONFIG_GPIOLIB=y
> > +# CONFIG_PINCTRL_MSM is not set
> > +# CONFIG_PINCTRL_IPQ8074 is not set
> > +# CONFIG_PINCTRL_IPQ6018 is not set
> > +# CONFIG_PINCTRL_MSM8916 is not set
> > +# CONFIG_PINCTRL_MSM8994 is not set
> > +# CONFIG_PINCTRL_MSM8996 is not set
> > +# CONFIG_PINCTRL_MSM8998 is not set
> > +# CONFIG_PINCTRL_QCS404 is not set
> > +# CONFIG_PINCTRL_QDF2XXX is not set
> > +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
> > +# CONFIG_PINCTRL_SC7180 is not set
> > +# CONFIG_PINCTRL_SC7280 is not set
> > +# CONFIG_PINCTRL_SDM845 is not set
> > +# CONFIG_PINCTRL_SM8150 is not set
> > +# CONFIG_PINCTRL_SM8250 is not set
> > +# CONFIG_PINCTRL_SM8350 is not set
> > +# CONFIG_PINCTRL_SM8450 is not set
> > +# CONFIG_PINCTRL_LPASS_LPI is not set
> > +# CONFIG_GPIO_DAVINCI is not set
> > +# CONFIG_GPIO_MPC8XXX is not set
> > +# CONFIG_GPIO_RCAR is not set
> > +# CONFIG_GPIO_UNIPHIER is not set
> > +# CONFIG_GPIO_VISCONTI is not set
> > +# CONFIG_GPIO_XGENE_SB is not set
> > +CONFIG_POWER_RESET_BRCMSTB=y
> > +# CONFIG_GPIO_MAX77620 is not set
> > +# CONFIG_GPIO_SL28CPLD is not set
> > +# CONFIG_POWER_RESET_MSM is not set
> > +# CONFIG_POWER_RESET_QCOM_PON is not set
> > +# CONFIG_BATTERY_MAX17042 is not set
> > +# CONFIG_CHARGER_BQ25890 is not set
> > +# CONFIG_CHARGER_BQ25980 is not set
> > +# CONFIG_SENSORS_JC42 is not set
> > +# CONFIG_SENSORS_LM75 is not set
> > +# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
> > +# CONFIG_SENSORS_SL28CPLD is not set
> > +CONFIG_THERMAL_WRITABLE_TRIPS=y
> > +CONFIG_IMX_SC_THERMAL=y
> > +CONFIG_IMX8MM_THERMAL=y
> > +CONFIG_QORIQ_THERMAL=y
> > +# CONFIG_SUN8I_THERMAL is not set
> > +# CONFIG_ROCKCHIP_THERMAL is not set
> > +# CONFIG_RCAR_THERMAL is not set
> > +# CONFIG_RCAR_GEN3_THERMAL is not set
> > +# CONFIG_RZG2L_THERMAL is not set
> > +# CONFIG_ARMADA_THERMAL is not set
> > +# CONFIG_BCM2711_THERMAL is not set
> > +# CONFIG_BCM2835_THERMAL is not set
> > +# CONFIG_BRCMSTB_THERMAL is not set
> > +# CONFIG_EXYNOS_THERMAL is not set
> > +# CONFIG_TEGRA_SOCTHERM is not set
> > +# CONFIG_TEGRA_BPMP_THERMAL is not set
> > +# CONFIG_QCOM_TSENS is not set
> > +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
> > +# CONFIG_QCOM_LMH is not set
> > +# CONFIG_UNIPHIER_THERMAL is not set
> > +# CONFIG_SL28CPLD_WATCHDOG is not set
> > +# CONFIG_S3C2410_WATCHDOG is not set
> > +# CONFIG_BCM7038_WDT is not set
> > +# CONFIG_SUNXI_WATCHDOG is not set
> > +CONFIG_IMX_SC_WDT=y
> > +CONFIG_IMX7ULP_WDT=y
> > +# CONFIG_QCOM_WDT is not set
> > +# CONFIG_MESON_GXBB_WATCHDOG is not set
> > +# CONFIG_MESON_WATCHDOG is not set
> > +# CONFIG_RENESAS_WDT is not set
> > +# CONFIG_RENESAS_RZG2LWDT is not set
> > +# CONFIG_UNIPHIER_WATCHDOG is not set
> > +# CONFIG_BCM2835_WDT is not set
> > +# CONFIG_MFD_ALTERA_SYSMGR is not set
> > +# CONFIG_MFD_AXP20X_RSB is not set
> > +# CONFIG_MFD_EXYNOS_LPASS is not set
> > +# CONFIG_MFD_HI655X_PMIC is not set
> > +# CONFIG_MFD_MT6397 is not set
> > +# CONFIG_MFD_SPMI_PMIC is not set
> > +# CONFIG_MFD_SL28CPLD is not set
> > +CONFIG_REGULATOR=y
> > +# CONFIG_REGULATOR_HI655X is not set
> > +# CONFIG_REGULATOR_MP8859 is not set
> > +# CONFIG_REGULATOR_MT6358 is not set
> > +# CONFIG_REGULATOR_MT6397 is not set
> > +# CONFIG_REGULATOR_PF8X00 is not set
> > +# CONFIG_REGULATOR_QCOM_RPMH is not set
> > +# CONFIG_REGULATOR_QCOM_SMD_RPM is not set
> > +# CONFIG_REGULATOR_QCOM_SPMI is not set
> > +# CONFIG_REGULATOR_TPS65132 is not set
> > +CONFIG_MEDIA_SUPPORT=y
> > +# CONFIG_RC_CORE is not set
> > +# CONFIG_RC_DECODERS is not set
> > +# CONFIG_RC_DEVICES is not set
> > +# CONFIG_IR_MESON is not set
> > +# CONFIG_IR_SUNXI is not set
> > +CONFIG_SDR_PLATFORM_DRIVERS=y
> > +# CONFIG_VIDEO_QCOM_CAMSS is not set
> > +# CONFIG_VIDEO_RCAR_CSI2 is not set
> > +# CONFIG_VIDEO_RCAR_VIN is not set
> > +# CONFIG_VIDEO_SUN6I_CSI is not set
> > +# CONFIG_VIDEO_RCAR_ISP is not set
> > +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
> > +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
> > +# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
> > +# CONFIG_VIDEO_RENESAS_FDP1 is not set
> > +# CONFIG_VIDEO_RENESAS_FCP is not set
> > +# CONFIG_VIDEO_RENESAS_VSP1 is not set
> > +# CONFIG_VIDEO_QCOM_VENUS is not set
> > +# CONFIG_VIDEO_RCAR_DRIF is not set
> > +CONFIG_VIDEO_OV5640=y
> > +CONFIG_DRM=y
> > +CONFIG_DRM_I2C_CH7006=m
> > +CONFIG_DRM_I2C_SIL164=m
> > +# CONFIG_DRM_NOUVEAU is not set
> > +# CONFIG_DRM_EXYNOS is not set
> > +# CONFIG_DRM_EXYNOS5433_DECON is not set
> > +# CONFIG_DRM_EXYNOS7_DECON is not set
> > +# CONFIG_DRM_EXYNOS_DSI is not set
> > +# CONFIG_DRM_EXYNOS_DP is not set
> > +# CONFIG_DRM_EXYNOS_HDMI is not set
> > +# CONFIG_DRM_EXYNOS_MIC is not set
> > +# CONFIG_DRM_ROCKCHIP is not set
> > +# CONFIG_ROCKCHIP_ANALOGIX_DP is not set
> > +# CONFIG_ROCKCHIP_CDN_DP is not set
> > +# CONFIG_ROCKCHIP_DW_HDMI is not set
> > +# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set
> > +# CONFIG_ROCKCHIP_INNO_HDMI is not set
> > +# CONFIG_ROCKCHIP_LVDS is not set
> > +# CONFIG_DRM_RCAR_DU is not set
> > +# CONFIG_DRM_RCAR_MIPI_DSI is not set
> > +# CONFIG_DRM_SUN4I is not set
> > +# CONFIG_DRM_SUN6I_DSI is not set
> > +# CONFIG_DRM_SUN8I_DW_HDMI is not set
> > +# CONFIG_DRM_SUN8I_MIXER is not set
> > +# CONFIG_DRM_MSM is not set
> > +# CONFIG_DRM_TEGRA is not set
> > +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
> > +# CONFIG_DRM_PANEL_LVDS is not set
> > +# CONFIG_DRM_PANEL_SIMPLE is not set
> > +# CONFIG_DRM_PANEL_EDP is not set
> > +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
> > +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
> > +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
> > +CONFIG_DRM_DISPLAY_CONNECTOR=m
> > +# CONFIG_DRM_LONTIUM_LT8912B is not set
> > +CONFIG_DRM_NWL_MIPI_DSI=y
> > +# CONFIG_DRM_LONTIUM_LT9611UXC is not set
> > +# CONFIG_DRM_PARADE_PS8640 is not set
> > +CONFIG_DRM_I2C_ADV7511=y
> > +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
> > +CONFIG_DRM_IMX_DCSS=y
> > +# CONFIG_DRM_VC4 is not set
> > +# CONFIG_DRM_HISI_HIBMC is not set
> > +CONFIG_DRM_MXSFB=y
> > +# CONFIG_DRM_MEDIATEK is not set
> > +# CONFIG_DRM_MEDIATEK_HDMI is not set
> > +# CONFIG_DRM_MESON is not set
> > +CONFIG_DRM_LEGACY=y
> > +# CONFIG_FB is not set
> > +# CONFIG_FB_MODE_HELPERS is not set
> > +# CONFIG_FB_EFI is not set
> > +# CONFIG_BACKLIGHT_PWM is not set
> > +# CONFIG_BACKLIGHT_LP855X is not set
> > +# CONFIG_LOGO is not set
> > +CONFIG_SND_DYNAMIC_MINORS=y
> > +CONFIG_SND_ALOOP=m
> > +# CONFIG_SND_SPI is not set
> > +# CONFIG_SND_USB is not set
> > +# CONFIG_SND_HDA_TEGRA is not set
> > +# CONFIG_SND_HDA_CODEC_HDMI is not set
> > +CONFIG_SND_SOC_FSL_ASRC=y
> > +CONFIG_SND_SOC_FSL_EASRC=y
> > +CONFIG_SND_IMX_SOC=y
> > +CONFIG_SND_SOC_FSL_ASOC_CARD=y
> > +CONFIG_SND_SOC_SOF_TOPLEVEL=y
> > +CONFIG_SND_SOC_SOF_OF=m
> > +CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
> > +CONFIG_SND_SOC_AK4458=y
> > +CONFIG_SND_SOC_AK5558=y
> > +CONFIG_SND_SOC_PCM512x_I2C=y
> > +CONFIG_SND_SIMPLE_CARD=y
> > +CONFIG_SND_AUDIO_GRAPH_CARD=y
> > +CONFIG_USB_CONN_GPIO=y
> > +# CONFIG_SND_BCM2835_SOC_I2S is not set
> > +# CONFIG_SND_SOC_FSL_MICFIL is not set
> > +# CONFIG_SND_SOC_IMX_SGTL5000 is not set
> > +# CONFIG_SND_SOC_IMX_SPDIF is not set
> > +# CONFIG_SND_SOC_IMX_AUDMIX is not set
> > +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
> > +# CONFIG_SND_MESON_GX_SOUND_CARD is not set
> > +# CONFIG_SND_SOC_QCOM is not set
> > +# CONFIG_SND_SOC_APQ8016_SBC is not set
> > +# CONFIG_SND_SOC_MSM8996 is not set
> > +# CONFIG_SND_SOC_SDM845 is not set
> > +# CONFIG_SND_SOC_SM8250 is not set
> > +# CONFIG_SND_SOC_ROCKCHIP is not set
> > +# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set
> > +# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set
> > +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set
> > +# CONFIG_SND_SOC_SAMSUNG is not set
> > +# CONFIG_SND_SOC_RCAR is not set
> > +# CONFIG_SND_SOC_RZ is not set
> > +# CONFIG_SND_SUN4I_I2S is not set
> > +# CONFIG_SND_SUN4I_SPDIF is not set
> > +# CONFIG_SND_SOC_TEGRA is not set
> > +# CONFIG_SND_SOC_TEGRA210_AHUB is not set
> > +# CONFIG_SND_SOC_TEGRA210_DMIC is not set
> > +# CONFIG_SND_SOC_TEGRA210_I2S is not set
> > +# CONFIG_SND_SOC_TEGRA186_DSPK is not set
> > +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set
> > +# CONFIG_SND_SOC_TEGRA210_MVC is not set
> > +# CONFIG_SND_SOC_TEGRA210_SFC is not set
> > +# CONFIG_SND_SOC_TEGRA210_AMX is not set
> > +# CONFIG_SND_SOC_TEGRA210_ADX is not set
> > +# CONFIG_SND_SOC_TEGRA210_MIXER is not set
> > +# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set
> > +# CONFIG_SND_SOC_AK4613 is not set
> > +# CONFIG_SND_SOC_ES7134 is not set
> > +# CONFIG_SND_SOC_ES7241 is not set
> > +# CONFIG_SND_SOC_GTM601 is not set
> > +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
> > +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
> > +# CONFIG_SND_SOC_PCM3168A_I2C is not set
> > +# CONFIG_SND_SOC_RT5659 is not set
> > +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
> > +# CONFIG_SND_SOC_SIMPLE_MUX is not set
> > +# CONFIG_SND_SOC_TAS571X is not set
> > +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
> > +# CONFIG_SND_SOC_WCD934X is not set
> > +# CONFIG_SND_SOC_WM8904 is not set
> > +# CONFIG_SND_SOC_WM8960 is not set
> > +# CONFIG_SND_SOC_WM8962 is not set
> > +# CONFIG_SND_SOC_WM8978 is not set
> > +# CONFIG_SND_SOC_WSA881X is not set
> > +# CONFIG_SND_SOC_NAU8822 is not set
> > +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
> > +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
> > +# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
> > +# CONFIG_HID_MULTITOUCH is not set
> > +# CONFIG_I2C_HID_ACPI is not set
> > +# CONFIG_I2C_HID_OF is not set
> > +# CONFIG_USB_XHCI_PCI_RENESAS is not set
> > +# CONFIG_USB_XHCI_TEGRA is not set
> > +# CONFIG_USB_EHCI_EXYNOS is not set
> > +# CONFIG_USB_OHCI_EXYNOS is not set
> > +CONFIG_USB_HCD_TEST_MODE=y
> > +# CONFIG_USB_RENESAS_USBHS_HCD is not set
> > +# CONFIG_USB_RENESAS_USBHS is not set
> > +CONFIG_USB_UAS=y
> > +# CONFIG_USB_CDNS_SUPPORT is not set
> > +# CONFIG_USB_CDNS3 is not set
> > +# CONFIG_USB_CDNS3_GADGET is not set
> > +# CONFIG_USB_CDNS3_HOST is not set
> > +# CONFIG_USB_MTU3 is not set
> > +# CONFIG_USB_MUSB_SUNXI is not set
> > +CONFIG_USB_SERIAL=y
> > +CONFIG_USB_SERIAL_CONSOLE=y
> > +CONFIG_USB_SERIAL_GENERIC=y
> > +CONFIG_USB_SERIAL_SIMPLE=y
> > +CONFIG_USB_SERIAL_FTDI_SIO=y
> > +CONFIG_USB_TEST=m
> > +CONFIG_USB_EHSET_TEST_FIXTURE=y
> > +# CONFIG_USB_SERIAL_CP210X is not set
> > +# CONFIG_USB_SERIAL_OPTION is not set
> > +CONFIG_USB_MXS_PHY=y
> > +CONFIG_USB_ULPI=y
> > +CONFIG_USB_SNP_UDC_PLAT=y
> > +CONFIG_USB_BDC_UDC=y
> > +CONFIG_USB_CONFIGFS=y
> > +# CONFIG_USB_RENESAS_USBHS_UDC is not set
> > +# CONFIG_USB_RENESAS_USB3 is not set
> > +# CONFIG_USB_TEGRA_XUDC is not set
> > +CONFIG_USB_CONFIGFS_F_LB_SS=y
> > +CONFIG_USB_CONFIGFS_F_UAC1=y
> > +CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
> > +CONFIG_USB_CONFIGFS_F_UAC2=y
> > +CONFIG_USB_CONFIGFS_F_MIDI=y
> > +CONFIG_USB_CONFIGFS_F_HID=y
> > +CONFIG_USB_CONFIGFS_F_UVC=y
> > +CONFIG_USB_ZERO=m
> > +CONFIG_USB_AUDIO=m
> > +CONFIG_USB_ETH=m
> > +CONFIG_USB_MASS_STORAGE=m
> > +CONFIG_USB_G_SERIAL=m
> > +CONFIG_TYPEC=y
> > +CONFIG_TYPEC_TCPM=y
> > +CONFIG_TYPEC_TCPCI=y
> > +# CONFIG_TYPEC_TPS6598X is not set
> > +# CONFIG_MMC_SDHCI_ACPI is not set
> > +# CONFIG_MMC_SDHCI_TEGRA is not set
> > +# CONFIG_MMC_MESON_GX is not set
> > +# CONFIG_MMC_SDHCI_MSM is not set
> > +# CONFIG_MMC_SDHI is not set
> > +# CONFIG_MMC_UNIPHIER is not set
> > +# CONFIG_MMC_DW_ROCKCHIP is not set
> > +# CONFIG_MMC_SUNXI is not set
> > +# CONFIG_MMC_BCM2835 is not set
> > +# CONFIG_MMC_MTK is not set
> > +# CONFIG_MMC_OWL is not set
> > +# CONFIG_LEDS_LM3692X is not set
> > +# CONFIG_LEDS_PCA9532 is not set
> > +# CONFIG_EDAC_LAYERSCAPE is not set
> > +# CONFIG_RTC_DRV_HYM8563 is not set
> > +# CONFIG_RTC_DRV_PCF85063 is not set
> > +# CONFIG_RTC_DRV_M41T80 is not set
> > +# CONFIG_RTC_DRV_RV3028 is not set
> > +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
> > +# CONFIG_RTC_DRV_S3C is not set
> > +CONFIG_RTC_DRV_SNVS=y
> > +CONFIG_RTC_DRV_IMX_SC=y
> > +# CONFIG_RTC_DRV_SUN6I is not set
> > +# CONFIG_RTC_DRV_ARMADA38X is not set
> > +# CONFIG_RTC_DRV_PM8XXX is not set
> > +# CONFIG_RTC_DRV_TEGRA is not set
> > +# CONFIG_RTC_DRV_XGENE is not set
> > +# CONFIG_RTC_DRV_MT6397 is not set
> > +CONFIG_BCM_SBA_RAID=m
> > +# CONFIG_DMA_BCM2835 is not set
> > +# CONFIG_DMA_SUN6I is not set
> > +CONFIG_FSL_QDMA=m
> > +CONFIG_IMX_SDMA=y
> > +# CONFIG_K3_DMA is not set
> > +# CONFIG_MV_XOR is not set
> > +CONFIG_MXS_DMA=y
> > +# CONFIG_OWL_DMA is not set
> > +# CONFIG_TEGRA186_GPC_DMA is not set
> > +# CONFIG_TEGRA20_APB_DMA is not set
> > +# CONFIG_TEGRA210_ADMA is not set
> > +# CONFIG_QCOM_BAM_DMA is not set
> > +CONFIG_DMATEST=y
> > +CONFIG_DMABUF_HEAPS=y
> > +CONFIG_DMABUF_HEAPS_SYSTEM=y
> > +CONFIG_DMABUF_HEAPS_CMA=y
> > +# CONFIG_RCAR_DMAC is not set
> > +# CONFIG_RENESAS_USB_DMAC is not set
> > +# CONFIG_RZ_DMAC is not set
> > +# CONFIG_TI_K3_UDMA is not set
> > +# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set
> > +# CONFIG_VFIO_PCI is not set
> > +# CONFIG_VIRTIO_PCI is not set
> > +# CONFIG_XEN_GNTDEV is not set
> > +# CONFIG_XEN_GRANT_DEV_ALLOC is not set
> > +# CONFIG_VIDEO_HANTRO is not set
> > +# CONFIG_VIDEO_IMX_MEDIA is not set
> > +# CONFIG_COMMON_CLK_SCMI is not set
> > +# CONFIG_COMMON_CLK_FSL_SAI is not set
> > +CONFIG_COMMON_CLK_XGENE=y
> > +# CONFIG_COMMON_CLK_BD718XX is not set
> > +# CONFIG_CLK_RASPBERRYPI is not set
> > +# CONFIG_CLK_IMX8MM is not set
> > +# CONFIG_CLK_IMX8MP is not set
> > +# CONFIG_CLK_IMX8MQ is not set
> > +# CONFIG_CLK_IMX8QXP is not set
> > +# CONFIG_CLK_IMX8ULP is not set
> > +# CONFIG_TI_SCI_CLK is not set
> > +# CONFIG_COMMON_CLK_QCOM is not set
> > +# CONFIG_QCOM_A53PLL is not set
> > +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
> > +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
> > +# CONFIG_QCOM_CLK_SMD_RPM is not set
> > +# CONFIG_QCOM_CLK_RPMH is not set
> > +# CONFIG_IPQ_GCC_6018 is not set
> > +# CONFIG_IPQ_GCC_8074 is not set
> > +# CONFIG_MSM_GCC_8916 is not set
> > +# CONFIG_MSM_GCC_8994 is not set
> > +# CONFIG_MSM_MMCC_8996 is not set
> > +# CONFIG_MSM_GCC_8998 is not set
> > +# CONFIG_QCS_GCC_404 is not set
> > +# CONFIG_SC_GCC_7180 is not set
> > +# CONFIG_SC_GCC_7280 is not set
> > +# CONFIG_SDM_CAMCC_845 is not set
> > +# CONFIG_SDM_GPUCC_845 is not set
> > +# CONFIG_SDM_VIDEOCC_845 is not set
> > +# CONFIG_SDM_DISPCC_845 is not set
> > +# CONFIG_SM_GCC_8350 is not set
> > +# CONFIG_SM_GCC_8450 is not set
> > +# CONFIG_SM_GPUCC_8150 is not set
> > +# CONFIG_SM_GPUCC_8250 is not set
> > +# CONFIG_QCOM_HFPLL is not set
> > +# CONFIG_CLK_GFM_LPASS_SM8250 is not set
> > +# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
> > +# CONFIG_HWSPINLOCK_QCOM is not set
> > +# CONFIG_RENESAS_OSTM is not set
> > +# CONFIG_BCM2835_MBOX is not set
> > +# CONFIG_QCOM_APCS_IPC is not set
> > +# CONFIG_QCOM_IPCC is not set
> > +# CONFIG_ROCKCHIP_IOMMU is not set
> > +# CONFIG_TEGRA_IOMMU_SMMU is not set
> > +# CONFIG_MTK_IOMMU is not set
> > +# CONFIG_QCOM_IOMMU is not set
> > +CONFIG_IMX_REMOTEPROC=y
> > +CONFIG_IMX_DSP_REMOTEPROC=y
> > +CONFIG_RPMSG_CHAR=y
> > +# CONFIG_QCOM_Q6V5_MSS is not set
> > +# CONFIG_QCOM_Q6V5_PAS is not set
> > +# CONFIG_QCOM_SYSMON is not set
> > +# CONFIG_QCOM_WCNSS_PIL is not set
> > +# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
> > +# CONFIG_RPMSG_QCOM_SMD is not set
> > +CONFIG_SOC_BRCMSTB=y
> > +# CONFIG_OWL_PM_DOMAINS is not set
> > +# CONFIG_RASPBERRYPI_POWER is not set
> > +# CONFIG_FSL_DPAA is not set
> > +# CONFIG_FSL_MC_DPIO is not set
> > +CONFIG_SOC_TI=y
> > +# CONFIG_MTK_DEVAPC is not set
> > +# CONFIG_MTK_PMIC_WRAP is not set
> > +# CONFIG_QCOM_AOSS_QMP is not set
> > +# CONFIG_QCOM_COMMAND_DB is not set
> > +# CONFIG_QCOM_CPR is not set
> > +# CONFIG_QCOM_GENI_SE is not set
> > +# CONFIG_QCOM_RMTFS_MEM is not set
> > +# CONFIG_QCOM_RPMH is not set
> > +# CONFIG_QCOM_RPMHPD is not set
> > +# CONFIG_QCOM_RPMPD is not set
> > +# CONFIG_QCOM_SMEM is not set
> > +# CONFIG_QCOM_SMD_RPM is not set
> > +# CONFIG_QCOM_SMP2P is not set
> > +# CONFIG_QCOM_SMSM is not set
> > +# CONFIG_QCOM_SOCINFO is not set
> > +# CONFIG_QCOM_STATS is not set
> > +# CONFIG_QCOM_WCNSS_CTRL is not set
> > +# CONFIG_QCOM_APR is not set
> > +# CONFIG_ARCH_R8A77995 is not set
> > +# CONFIG_ARCH_R8A77990 is not set
> > +# CONFIG_ARCH_R8A77950 is not set
> > +# CONFIG_ARCH_R8A77951 is not set
> > +# CONFIG_ARCH_R8A77965 is not set
> > +# CONFIG_ARCH_R8A77960 is not set
> > +# CONFIG_ARCH_R8A77961 is not set
> > +# CONFIG_ARCH_R8A779F0 is not set
> > +# CONFIG_ARCH_R8A77980 is not set
> > +# CONFIG_ARCH_R8A77970 is not set
> > +# CONFIG_ARCH_R8A779A0 is not set
> > +# CONFIG_ARCH_R8A774C0 is not set
> > +# CONFIG_ARCH_R8A774E1 is not set
> > +# CONFIG_ARCH_R8A774A1 is not set
> > +# CONFIG_ARCH_R8A774B1 is not set
> > +# CONFIG_ARCH_R9A07G044 is not set
> > +# CONFIG_ROCKCHIP_IODOMAIN is not set
> > +# CONFIG_ROCKCHIP_PM_DOMAINS is not set
> > +# CONFIG_ARCH_TEGRA_132_SOC is not set
> > +# CONFIG_ARCH_TEGRA_210_SOC is not set
> > +# CONFIG_ARCH_TEGRA_186_SOC is not set
> > +# CONFIG_ARCH_TEGRA_194_SOC is not set
> > +# CONFIG_ARCH_TEGRA_234_SOC is not set
> > +# CONFIG_TI_SCI_PM_DOMAINS is not set
> > +# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
> > +# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
> > +CONFIG_MEMORY=y
> > +# CONFIG_RENESAS_RPCIF is not set
> > +CONFIG_IMX8QXP_ADC=y
> > +# CONFIG_EXYNOS_ADC is not set
> > +# CONFIG_QCOM_SPMI_VADC is not set
> > +# CONFIG_QCOM_SPMI_ADC5 is not set
> > +# CONFIG_ROCKCHIP_SARADC is not set
> > +# CONFIG_RZG2L_ADC is not set
> > +# CONFIG_TI_ADS1015 is not set
> > +CONFIG_IIO_ST_LSM6DSX=y
> > +# CONFIG_SENSORS_ISL29018 is not set
> > +# CONFIG_VCNL4000 is not set
> > +# CONFIG_IIO_ST_MAGN_3AXIS is not set
> > +# CONFIG_MPL3115 is not set
> > +# CONFIG_PWM_BCM2835 is not set
> > +# CONFIG_PWM_BRCMSTB is not set
> > +CONFIG_PWM_FSL_FTM=m
> > +CONFIG_PWM_IMX27=y
> > +# CONFIG_PWM_MESON is not set
> > +# CONFIG_PWM_MTK_DISP is not set
> > +# CONFIG_PWM_MEDIATEK is not set
> > +# CONFIG_PWM_RCAR is not set
> > +# CONFIG_PWM_RENESAS_TPU is not set
> > +# CONFIG_PWM_ROCKCHIP is not set
> > +# CONFIG_PWM_SAMSUNG is not set
> > +# CONFIG_PWM_SL28CPLD is not set
> > +# CONFIG_PWM_SUN4I is not set
> > +# CONFIG_PWM_TEGRA is not set
> > +# CONFIG_PWM_VISCONTI is not set
> > +# CONFIG_SL28CPLD_INTC is not set
> > +# CONFIG_QCOM_PDC is not set
> > +# CONFIG_RESET_QCOM_AOSS is not set
> > +# CONFIG_RESET_QCOM_PDC is not set
> > +# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
> > +# CONFIG_RESET_TI_SCI is not set
> > +CONFIG_PHY_CADENCE_SALVO=y
> > +CONFIG_PHY_MIXEL_MIPI_DPHY=y
> > +# CONFIG_PHY_SUN4I_USB is not set
> > +# CONFIG_PHY_CADENCE_SIERRA is not set
> > +# CONFIG_PHY_FSL_IMX8M_PCIE is not set
> > +# CONFIG_PHY_HI6220_USB is not set
> > +# CONFIG_PHY_HISTB_COMBPHY is not set
> > +# CONFIG_PHY_HISI_INNO_USB2 is not set
> > +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
> > +# CONFIG_PHY_MTK_TPHY is not set
> > +# CONFIG_PHY_QCOM_QMP is not set
> > +# CONFIG_PHY_QCOM_QUSB2 is not set
> > +CONFIG_PHY_SAMSUNG_USB2=y
> > +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
> > +# CONFIG_PHY_RCAR_GEN3_PCIE is not set
> > +# CONFIG_PHY_RCAR_GEN3_USB2 is not set
> > +# CONFIG_PHY_RCAR_GEN3_USB3 is not set
> > +# CONFIG_PHY_ROCKCHIP_EMMC is not set
> > +# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
> > +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
> > +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
> > +# CONFIG_PHY_ROCKCHIP_PCIE is not set
> > +# CONFIG_PHY_ROCKCHIP_TYPEC is not set
> > +# CONFIG_PHY_SAMSUNG_UFS is not set
> > +# CONFIG_PHY_UNIPHIER_USB2 is not set
> > +# CONFIG_PHY_UNIPHIER_USB3 is not set
> > +# CONFIG_PHY_TEGRA_XUSB is not set
> > +# CONFIG_PHY_AM654_SERDES is not set
> > +# CONFIG_PHY_J721E_WIZ is not set
> > +CONFIG_FSL_IMX8_DDR_PMU=y
> > +# CONFIG_QCOM_L2_PMU is not set
> > +# CONFIG_QCOM_L3_PMU is not set
> > +# CONFIG_MTK_EFUSE is not set
> > +# CONFIG_QCOM_QFPROM is not set
> > +# CONFIG_ROCKCHIP_EFUSE is not set
> > +# CONFIG_NVMEM_SUNXI_SID is not set
> > +# CONFIG_UNIPHIER_EFUSE is not set
> > +# CONFIG_MESON_EFUSE is not set
> > +# CONFIG_NVMEM_RMEM is not set
> > +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
> > +# CONFIG_FPGA_MGR_ALTERA_CVP is not set
> > +# CONFIG_FPGA_MGR_STRATIX10_SOC is not set
> > +# CONFIG_SLIMBUS is not set
> > +# CONFIG_SLIM_QCOM_NGD_CTRL is not set
> > +# CONFIG_INTERCONNECT_IMX is not set
> > +# CONFIG_INTERCONNECT_IMX8MM is not set
> > +# CONFIG_INTERCONNECT_IMX8MN is not set
> > +# CONFIG_INTERCONNECT_IMX8MQ is not set
> > +# CONFIG_INTERCONNECT_QCOM is not set
> > +# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set
> > +# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SC7280 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SDM845 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8150 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8250 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8350 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8450 is not set
> > +# CONFIG_TMPFS_POSIX_ACL is not set
> > +# CONFIG_CONFIGFS_FS is not set
> > +CONFIG_JFFS2_FS=y
> > +CONFIG_UBIFS_FS=y
> > +CONFIG_SQUASHFS_XZ=y
> > +CONFIG_CRYPTO_USER=y
> > +CONFIG_CRYPTO_TEST=m
> > +CONFIG_CRYPTO_DH=m
> > +CONFIG_CRYPTO_CHACHA20POLY1305=m
> > +CONFIG_CRYPTO_CFB=m
> > +CONFIG_CRYPTO_CTS=m
> > +CONFIG_CRYPTO_LRW=m
> > +CONFIG_CRYPTO_OFB=m
> > +CONFIG_CRYPTO_PCBC=m
> > +CONFIG_CRYPTO_XCBC=m
> > +CONFIG_CRYPTO_VMAC=m
> > +CONFIG_CRYPTO_MD4=m
> > +CONFIG_CRYPTO_RMD160=m
> > +CONFIG_CRYPTO_STREEBOG=m
> > +CONFIG_CRYPTO_WP512=m
> > +CONFIG_CRYPTO_ANUBIS=m
> > +CONFIG_CRYPTO_ARC4=m
> > +CONFIG_CRYPTO_BLOWFISH=m
> > +CONFIG_CRYPTO_CAMELLIA=m
> > +CONFIG_CRYPTO_CAST5=m
> > +CONFIG_CRYPTO_CAST6=m
> > +CONFIG_CRYPTO_DES=m
> > +CONFIG_CRYPTO_FCRYPT=m
> > +CONFIG_CRYPTO_KHAZAD=m
> > +CONFIG_CRYPTO_SEED=m
> > +CONFIG_CRYPTO_SERPENT=m
> > +CONFIG_CRYPTO_TEA=m
> > +CONFIG_CRYPTO_TWOFISH=m
> > +CONFIG_CRYPTO_USER_API_HASH=m
> > +CONFIG_CRYPTO_USER_API_SKCIPHER=m
> > +CONFIG_CRYPTO_USER_API_AEAD=m
> > +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
> > +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
> > +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
> > +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
> > +CONFIG_INDIRECT_PIO=y
> > +CONFIG_CRC_CCITT=m
> > +# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
> > +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
> > +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
> > +# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
> > +CONFIG_IRQ_POLL=y
> > +# CONFIG_DEBUG_INFO is not set
> > +# CONFIG_DEBUG_INFO_REDUCED is not set
> > +CONFIG_CORESIGHT=y
> > +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
> > +CONFIG_CORESIGHT_SOURCE_ETM4X=y
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> > new file mode 100644
> > index 000000000000..c01d2d6c1dac
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> > @@ -0,0 +1,29 @@
> > +# @_flash.bin            | bootloader
> > +# @_image   [_flash.bin] | image burn to nand, default is the same as bootloader
> > +# @_filesystem           | filesystem to burn
> > +# @_kernel               | kernel image
> > +# @_dtb                  | dtb image
> > +
> > +# This command will be run when ROM support stream mode
> > +# i.MX8QXP, i.MX8QM
> > +SDPS: boot -f _flash.bin
> > +
> > +FB: ucmd setenv fastboot_buffer ${loadaddr}
> > +FB: download -f _image
> > +# Burn image to nandfit partition if needed
> > +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
> > +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
> > +
> > +FB[-t 10000]: ucmd ubi part nandrootfs
> > +FB[-t 10000]: ucmd ubi create root -
> > +FB: download -f _filesystem
> > +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
> > +
> > +FB: download -f _kernel
> > +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize}
> > +
> > +FB: download -f _dtb
> > +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> > +
> > +FB: reboot
> > +FB: done
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> > new file mode 100644
> > index 000000000000..9293058ef0e1
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> > @@ -0,0 +1,45 @@
> > +From d4872d93ba5f7111562b0ac1cab356f56d01c1b4 Mon Sep 17 00:00:00 2001
> > +From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +Date: Sun, 22 May 2022 17:40:15 +0200
> > +Subject: [PATCH] dmaengine: mxs: use platform_driver_register
> > +
> > +Driver registration fails on SOC imx8mn as its supplier, the clock
> > +control module, is probed later than subsys initcall level. This driver
> > +uses platform_driver_probe which is not compatible with deferred probing
> > +and won't be probed again later if probe function fails due to clock not
> > +being available at that time.
> > +
> > +This patch replaces the use of platform_driver_probe with
> > +platform_driver_register which will allow probing the driver later again
> > +when the clock control module will be available.
> > +
> > +Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
> > +Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +Cc: stable@vger.kernel.org
> > +Link: https://lore.kernel.org/lkml/20220712160909.2054141-1-dario.binacchi@amarulasolutions.com
> > +---
> > + drivers/dma/mxs-dma.c | 8 ++------
> > + 1 file changed, 2 insertions(+), 6 deletions(-)
> > +
> > +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> > +index 994fc4d2aca4..18f8154b859b 100644
> > +--- a/drivers/dma/mxs-dma.c
> > ++++ b/drivers/dma/mxs-dma.c
> > +@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = {
> > +        .name    = "mxs-dma",
> > +        .of_match_table = mxs_dma_dt_ids,
> > +    },
> > ++    .probe = mxs_dma_probe,
> > + };
> > +-
> > +-static int __init mxs_dma_module_init(void)
> > +-{
> > +-    return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe);
> > +-}
> > +-subsys_initcall(mxs_dma_module_init);
> > ++builtin_platform_driver(mxs_dma_driver);
> > +--
> > +2.32.0
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> > new file mode 100644
> > index 000000000000..faf3b7290e68
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> > @@ -0,0 +1,39 @@
> > +From 1322ec115e91419a8f7b7d6d5e36e68316908b5a Mon Sep 17 00:00:00 2001
> > +From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +Date: Tue, 12 Jul 2022 15:15:19 +0200
> > +Subject: [PATCH] dmaengine: mxs: fix section mismatch
> > +
> > +The patch was suggested by the following modpost warning:
> > +
> > +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe()
> > +The variable mxs_dma_driver references
> > +the function __init mxs_dma_probe()
> > +If the reference is valid then annotate the
> > +variable with __init* or __refdata (see linux/init.h) or name the variable:
> > +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
> > +
> > +Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +Cc: stable@vger.kernel.org
> > +Link: https://lore.kernel.org/linux-arm-kernel/20220712160909.2054141-2-dario.binacchi@amarulasolutions.com/
> > +---
> > + drivers/dma/mxs-dma.c | 2 +-
> > + 1 file changed, 1 insertion(+), 1 deletion(-)
> > +
> > +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> > +index 18f8154b859b..a01953e06048 100644
> > +--- a/drivers/dma/mxs-dma.c
> > ++++ b/drivers/dma/mxs-dma.c
> > +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
> > +    return 0;
> > + }
> > +
> > +-static struct platform_driver mxs_dma_driver = {
> > ++static struct platform_driver mxs_dma_driver __initdata = {
> > +    .driver        = {
> > +        .name    = "mxs-dma",
> > +        .of_match_table = mxs_dma_dt_ids,
> > +--
> > +2.32.0
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> > new file mode 100644
> > index 000000000000..59db559b9301
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> > @@ -0,0 +1,160 @@
> > +From 3878b941c6bde84e29b2725e4261d85bea828752 Mon Sep 17 00:00:00 2001
> > +From: Michael Trimarchi <michael@amarulasolutions.com>
> > +Date: Sun, 22 May 2022 15:22:08 +0200
> > +Subject: [PATCH] include/configs: Remove rootwait=1 to all the affected boards
> > +
> > +rootwait=1 is not a valid kernel boot parameters. According
> > +to the documenation is only rootwait
> > +
> > +rootwait    [KNL]    Wait (indefinitely) for root device to show up.
> > +            Useful for devices that are detected asynchronously
> > +            (e.g. USB and MMC devices).
> > +
> > +Fix:
> > +Unknown kernel command line parameters "rootwait=1", will be passed to user space.
> > +
> > +Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Reviewed-by: Heiko Schocher <hs@denx.de>
> > +Link: https://patchwork.ozlabs.org/project/uboot/patch/20220520110013.32811-1-michael@amarulasolutions.com/
> > +Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +---
> > + include/configs/am335x_evm.h           | 2 +-
> > + include/configs/am43xx_evm.h           | 2 +-
> > + include/configs/baltos.h               | 2 +-
> > + include/configs/chiliboard.h           | 2 +-
> > + include/configs/etamin.h               | 2 +-
> > + include/configs/imx8mn_bsh_smm_s2.h    | 2 +-
> > + include/configs/siemens-am33x-common.h | 4 ++--
> > + include/configs/ti_armv7_keystone2.h   | 2 +-
> > + include/environment/ti/nand.h          | 2 +-
> > + 9 files changed, 10 insertions(+), 10 deletions(-)
> > +
> > +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
> > +index fd5b209a52db..f301a6dc835b 100644
> > +--- a/include/configs/am335x_evm.h
> > ++++ b/include/configs/am335x_evm.h
> > +@@ -34,7 +34,7 @@
> > +        "root=${nandroot} " \
> > +        "rootfstype=${nandrootfstype}\0" \
> > +    "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
> > +-    "nandrootfstype=ubifs rootwait=1\0" \
> > ++    "nandrootfstype=ubifs rootwait\0" \
> > +    "nandboot=echo Booting from nand ...; " \
> > +        "run nandargs; " \
> > +        "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> > +diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
> > +index 5057441f7506..1f5c3cd04e88 100644
> > +--- a/include/configs/am43xx_evm.h
> > ++++ b/include/configs/am43xx_evm.h
> > +@@ -166,7 +166,7 @@
> > +        "root=${nandroot} " \
> > +        "rootfstype=${nandrootfstype}\0" \
> > +    "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \
> > +-    "nandrootfstype=ubifs rootwait=1\0" \
> > ++    "nandrootfstype=ubifs rootwait\0" \
> > +    "nandboot=echo Booting from nand ...; " \
> > +        "run nandargs; " \
> > +        "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> > +diff --git a/include/configs/baltos.h b/include/configs/baltos.h
> > +index b881d8c03fd7..7b43741fde7c 100644
> > +--- a/include/configs/baltos.h
> > ++++ b/include/configs/baltos.h
> > +@@ -37,7 +37,7 @@
> > +        "root=${nandroot} " \
> > +        "rootfstype=${nandrootfstype}\0" \
> > +    "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
> > +-    "nandrootfstype=ubifs rootwait=1\0" \
> > ++    "nandrootfstype=ubifs rootwait\0" \
> > +    "nandboot=echo Booting from nand ...; " \
> > +        "run nandargs; " \
> > +        "setenv loadaddr 0x84000000; " \
> > +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
> > +index 82acda595f09..8bad0f9ac4b6 100644
> > +--- a/include/configs/chiliboard.h
> > ++++ b/include/configs/chiliboard.h
> > +@@ -20,7 +20,7 @@
> > +        "root=${nandroot} " \
> > +        "rootfstype=${nandrootfstype}\0" \
> > +    "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
> > +-    "nandrootfstype=ubifs rootwait=1\0" \
> > ++    "nandrootfstype=ubifs rootwait\0" \
> > +    "nandboot=echo Booting from nand ...; " \
> > +        "run nandargs; " \
> > +        "nand read ${fdt_addr} NAND.u-boot-spl-os; " \
> > +diff --git a/include/configs/etamin.h b/include/configs/etamin.h
> > +index 9cf93924df93..1c0a86d1ed10 100644
> > +--- a/include/configs/etamin.h
> > ++++ b/include/configs/etamin.h
> > +@@ -113,7 +113,7 @@
> > +    "nand_active_ubi_vol=rootfs_a\0" \
> > +    "rootfs_name=rootfs\0" \
> > +    "kernel_name=uImage\0"\
> > +-    "nand_root_fs_type=ubifs rootwait=1\0" \
> > ++    "nand_root_fs_type=ubifs rootwait\0" \
> > +    "nand_args=run bootargs_defaults;" \
> > +        "mtdparts default;" \
> > +        "setenv ${partitionset_active} true;" \
> > +diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h
> > +index d09c2ab01610..0dc514f00684 100644
> > +--- a/include/configs/imx8mn_bsh_smm_s2.h
> > ++++ b/include/configs/imx8mn_bsh_smm_s2.h
> > +@@ -22,7 +22,7 @@
> > +        "root=${nandroot} " \
> > +        "rootfstype=${nandrootfstype}\0" \
> > +    "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \
> > +-    "nandrootfstype=ubifs rootwait=1\0" \
> > ++    "nandrootfstype=ubifs rootwait\0" \
> > +    "nandboot=echo Booting from nand ...; " \
> > +        "run nandargs; " \
> > +        "nand read ${fdt_addr_r} nanddtb; " \
> > +diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
> > +index 08c4d52d658f..9f1a6cd51b40 100644
> > +--- a/include/configs/siemens-am33x-common.h
> > ++++ b/include/configs/siemens-am33x-common.h
> > +@@ -237,7 +237,7 @@
> > +    "nand_active_ubi_vol=rootfs_a\0" \
> > +    "nand_active_ubi_vol_A=rootfs_a\0" \
> > +    "nand_active_ubi_vol_B=rootfs_b\0" \
> > +-    "nand_root_fs_type=ubifs rootwait=1\0" \
> > ++    "nand_root_fs_type=ubifs rootwait\0" \
> > +    "nand_src_addr=0x280000\0" \
> > +    "nand_src_addr_A=0x280000\0" \
> > +    "nand_src_addr_B=0x780000\0" \
> > +@@ -314,7 +314,7 @@
> > +    "nand_active_ubi_vol=rootfs_a\0" \
> > +    "rootfs_name=rootfs\0" \
> > +    "kernel_name=uImage\0"\
> > +-    "nand_root_fs_type=ubifs rootwait=1\0" \
> > ++    "nand_root_fs_type=ubifs rootwait\0" \
> > +    "nand_args=run bootargs_defaults;" \
> > +        "mtdparts default;" \
> > +        "setenv ${partitionset_active} true;" \
> > +diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
> > +index 57f013cbf846..133daecf7164 100644
> > +--- a/include/configs/ti_armv7_keystone2.h
> > ++++ b/include/configs/ti_armv7_keystone2.h
> > +@@ -180,7 +180,7 @@
> > +        "sf write ${loadaddr} 0 ${filesize}\0"        \
> > +    "burn_uboot_nand=nand erase 0 0x100000; "            \
> > +        "nand write ${loadaddr} 0 ${filesize}\0"        \
> > +-    "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 "    \
> > ++    "args_all=setenv bootargs console=ttyS0,115200n8 rootwait "    \
> > +        KERNEL_MTD_PARTS                    \
> > +    "args_net=setenv bootargs ${bootargs} rootfstype=nfs "        \
> > +        "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"    \
> > +diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h
> > +index 11dcefcc41ca..7d00afa2b10f 100644
> > +--- a/include/environment/ti/nand.h
> > ++++ b/include/environment/ti/nand.h
> > +@@ -14,7 +14,7 @@
> > +        "root=${nandroot} " \
> > +        "rootfstype=${nandrootfstype}\0" \
> > +    "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
> > +-    "nandrootfstype=ubifs rootwait=1\0" \
> > ++    "nandrootfstype=ubifs rootwait\0" \
> > +    "nandboot=echo Booting from nand ...; " \
> > +        "run nandargs; " \
> > +        "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> > +--
> > +2.32.0
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> > new file mode 100755
> > index 000000000000..49df4cd6fb10
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> > @@ -0,0 +1,4 @@
> > +#!/bin/sh
> > +BOARD_DIR="$(dirname $0)"
> > +
> > +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/readme.txt b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
> > new file mode 100644
> > index 000000000000..37081091e849
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
> > @@ -0,0 +1,75 @@
> > +i.MX8MN BSH SMM S2
> > +==================
> > +
> > +This tutorial describes how to use the predefined Buildroot
> > +configuration for the i.MX8MN BSH SMM S2 PRO board.
> > +
> > +Building
> > +--------
> > +
> > +Configure buildroot:
> > +
> > +  $ make imx8mn_bsh_smm_s2_defconfig
> > +
> > +Change settings to fit your needs (optional):
> > +
> > +  $ make menuconfig
> > +
> > +Compile everything and build the rootfs image:
> > +
> > +  $ make
> > +
> > +
> > +Result of the build
> > +-------------------
> > +
> > +After building, the output/images directory contains:
> > +
> > +  output/images/
> > +    ├── bl31.bin
> > +    ├── ddr3*
> > +    ├── flash.bin
> > +    ├── freescale/imx8mn-bsh-smm-s2.dtb
> > +    ├── Image
> > +    ├── nand-full.lst
> > +    ├── rootfs.ext2
> > +    ├── rootfs.ext4 -> rootfs.ext2
> > +    ├── rootfs.tar
> > +    ├── rootfs.ubifs
> > +    ├── u-boot.bin
> > +    └── u-boot-spl.bin
> > +
> > +
> > +Preparing the board
> > +-------------------
> > +
> > +Plug the USB type A to micro B cable into the USB Debug
> > +Connector (DBG UART). Use serial port settings 115200 8N1
> > +to access the debug console.
> > +
> > +Plug another USB type A to micro B cable into the USB-OTG
> > +Connector (USB1). This connection is used to flash the board
> > +firmware using the Freescale/NXP UUU tool.
> > +
> > +Connect the power supply/adaptor to the DC Power Jack (labelled
> > ++5V).
> > +
> > +
> > +Flashing
> > +--------
> > +
> > +Power up the board by switching on the Power ON Switch, which is
> > +placed right next to the DC Jack.
> > +
> > +Enter the following U-Boot commands on the debug serial console:
> > +
> > +  $ nand erase.chip
> > +  $ reset
> > +
> > +Flash the built images directly to board’s memory. On your computer,
> > +run:
> > +
> > +  $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/
> > +
> > +It will flash the bootloader, the Device Tree Blob, the kernel image
> > +and the UBI root file system.
> > diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
> > new file mode 100644
> > index 000000000000..7f6023c64b45
> > --- /dev/null
> > +++ b/configs/imx8mn_bsh_smm_s2_defconfig
> > @@ -0,0 +1,40 @@
> > +BR2_aarch64=y
> > +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches"
> > +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
> > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh"
> > +BR2_LINUX_KERNEL=y
> > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.7"
> > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> > +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
> > +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
> > +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
> > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > +BR2_PACKAGE_FREESCALE_IMX=y
> > +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
> > +BR2_PACKAGE_FIRMWARE_IMX=y
> > +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
> > +BR2_TARGET_ROOTFS_UBIFS=y
> > +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
> > +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y
> > +BR2_TARGET_UBOOT=y
> > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
> > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2"
> > +BR2_TARGET_UBOOT_NEEDS_DTC=y
> > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> > +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
> > +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> > +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
> > +BR2_TARGET_UBOOT_SPL=y
> > +BR2_PACKAGE_HOST_UUU=y
> > --
> > 2.32.0
> >
>