[v2] usb: gadget: fastboot: detach usb just before rebooting

Message ID 20230104164658.2734718-1-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • [v2] usb: gadget: fastboot: detach usb just before rebooting
Related show

Commit Message

Dario Binacchi Jan. 4, 2023, 4:46 p.m. UTC
The patch fixes the following error when updating a BSH SMM S2 board:
3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
3:72>Okay (0.023s)
3:72>Start Cmd:FB: reboot
3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)

The "fastboot reboot" command detaches the USB when it still needs to be
used. So let's detach the USB just before the reset.

CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v2:
- Add 'Suggested-by' tag.

 drivers/usb/gadget/f_fastboot.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Mattijs Korpershoek Jan. 5, 2023, 9:06 a.m. UTC | #1
On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:

> The patch fixes the following error when updating a BSH SMM S2 board:
> 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> 3:72>Okay (0.023s)
> 3:72>Start Cmd:FB: reboot
> 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
>
> The "fastboot reboot" command detaches the USB when it still needs to be
> used. So let's detach the USB just before the reset.
>
> CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
> Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

Hi Dario,

Thank you for your patch and for reporting the problem.

Unfortunately, applying it seems to break the problem I tried to
solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")

Does reverting 5f7e01e9d5d800 also solves your issue?

I'll spend some time on this.

>
> ---
>
> Changes in v2:
> - Add 'Suggested-by' tag.
>
>  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index 07b1681c8a9a..0b3fae564d0a 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
>  	return fastboot_tx_write(buffer, strlen(buffer));
>  }
>  
> -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> -{
> -	do_reset(NULL, 0, 0, NULL);
> -}
> -
>  static unsigned int rx_bytes_expected(struct usb_ep *ep)
>  {
>  	int rx_remain = fastboot_data_remaining();
> @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>  	do_exit_on_complete(ep, req);
>  }
>  
> +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> +{
> +	do_exit_on_complete(ep, req);
> +	do_reset(NULL, 0, 0, NULL);
> +}
> +
>  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
>  {
> @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
>  		case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
>  		case FASTBOOT_COMMAND_REBOOT_RECOVERY:
>  			fastboot_func->in_req->complete = compl_do_reset;
> -			g_dnl_trigger_detach();
>  			break;
>  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>  		case FASTBOOT_COMMAND_ACMD:
> -- 
> 2.32.0
Dario Binacchi Jan. 5, 2023, 9:10 a.m. UTC | #2
Hi Mattijs,

On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek
<mkorpershoek@baylibre.com> wrote:
>
> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>
> > The patch fixes the following error when updating a BSH SMM S2 board:
> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> > 3:72>Okay (0.023s)
> > 3:72>Start Cmd:FB: reboot
> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
> >
> > The "fastboot reboot" command detaches the USB when it still needs to be
> > used. So let's detach the USB just before the reset.
> >
> > CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
> > Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>
> Hi Dario,
>
> Thank you for your patch and for reporting the problem.
>
> Unfortunately, applying it seems to break the problem I tried to
> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>
> Does reverting 5f7e01e9d5d800 also solves your issue?

Yes

>
> I'll spend some time on this.

Ok, thanks. So we can test on our hardware.
Regards Dario

>
> >
> > ---
> >
> > Changes in v2:
> > - Add 'Suggested-by' tag.
> >
> >  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> > index 07b1681c8a9a..0b3fae564d0a 100644
> > --- a/drivers/usb/gadget/f_fastboot.c
> > +++ b/drivers/usb/gadget/f_fastboot.c
> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
> >       return fastboot_tx_write(buffer, strlen(buffer));
> >  }
> >
> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> > -{
> > -     do_reset(NULL, 0, 0, NULL);
> > -}
> > -
> >  static unsigned int rx_bytes_expected(struct usb_ep *ep)
> >  {
> >       int rx_remain = fastboot_data_remaining();
> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
> >       do_exit_on_complete(ep, req);
> >  }
> >
> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> > +{
> > +     do_exit_on_complete(ep, req);
> > +     do_reset(NULL, 0, 0, NULL);
> > +}
> > +
> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
> >  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
> >  {
> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
> >               case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
> >               case FASTBOOT_COMMAND_REBOOT_RECOVERY:
> >                       fastboot_func->in_req->complete = compl_do_reset;
> > -                     g_dnl_trigger_detach();
> >                       break;
> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
> >               case FASTBOOT_COMMAND_ACMD:
> > --
> > 2.32.0
Mattijs Korpershoek Jan. 5, 2023, 11:03 a.m. UTC | #3
On Thu, Jan 05, 2023 at 10:10, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:

> Hi Mattijs,
>
> On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek
> <mkorpershoek@baylibre.com> wrote:
>>
>> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>>
>> > The patch fixes the following error when updating a BSH SMM S2 board:
>> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
>> > 3:72>Okay (0.023s)
>> > 3:72>Start Cmd:FB: reboot
>> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
>> >
>> > The "fastboot reboot" command detaches the USB when it still needs to be
>> > used. So let's detach the USB just before the reset.
>> >
>> > CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
>> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>> > Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
>> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>>
>> Hi Dario,
>>
>> Thank you for your patch and for reporting the problem.
>>
>> Unfortunately, applying it seems to break the problem I tried to
>> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>>
>> Does reverting 5f7e01e9d5d800 also solves your issue?
>
> Yes
>
>>
>> I'll spend some time on this.
>
> Ok, thanks. So we can test on our hardware.

So historically, I wanted to make this a "arch specific fix, as
discussed in
https://lore.kernel.org/u-boot/20220728-reset-usb-controller-v2-0-ef7657ce78b1@baylibre.com/

To me, the problem with calling g_dnl_trigger_detach() in the
fastboot_func->in_req->complete() handler is that it's called too late.

In fact, the main fastboot loop is as following:

    while (1) {
            if (g_dnl_detach())
                    break;
            if (ctrlc())
                    break;
            schedule();
            usb_gadget_handle_interrupts(controller_index);
     }
      ret = CMD_RET_SUCCESS;

  exit:
      usb_gadget_release(controller_index);
      g_dnl_unregister();
      g_dnl_clear_detach();

      return ret;

usb_gadget_handle_interrupts, will at some point, call complete() which will call compl_do_reset().
But in compl_do_reset(), we already reset the board
(without going through the exit: section from cmd/fastboot.c)

For the BSH SMM S2 board, since it's being updated with uuu,
I assume that the host PC also triggers a call of acmd_complete() afterwards?

Can you try the following diff as well, on top of your change? (for testing purposes)

--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -492,7 +492,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
 
 static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
 {
-       do_exit_on_complete(ep, req);
+       usb_gadget_release(0);
        do_reset(NULL, 0, 0, NULL);
 }

I suspect this will also break your flashing.

> Regards Dario
>
>>
>> >
>> > ---
>> >
>> > Changes in v2:
>> > - Add 'Suggested-by' tag.
>> >
>> >  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
>> >  1 file changed, 6 insertions(+), 6 deletions(-)
>> >
>> > diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
>> > index 07b1681c8a9a..0b3fae564d0a 100644
>> > --- a/drivers/usb/gadget/f_fastboot.c
>> > +++ b/drivers/usb/gadget/f_fastboot.c
>> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
>> >       return fastboot_tx_write(buffer, strlen(buffer));
>> >  }
>> >
>> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> > -{
>> > -     do_reset(NULL, 0, 0, NULL);
>> > -}
>> > -
>> >  static unsigned int rx_bytes_expected(struct usb_ep *ep)
>> >  {
>> >       int rx_remain = fastboot_data_remaining();
>> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>> >       do_exit_on_complete(ep, req);
>> >  }
>> >
>> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> > +{
>> > +     do_exit_on_complete(ep, req);
>> > +     do_reset(NULL, 0, 0, NULL);
>> > +}
>> > +
>> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
>> >  {
>> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
>> >               case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
>> >               case FASTBOOT_COMMAND_REBOOT_RECOVERY:
>> >                       fastboot_func->in_req->complete = compl_do_reset;
>> > -                     g_dnl_trigger_detach();
>> >                       break;
>> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >               case FASTBOOT_COMMAND_ACMD:
>> > --
>> > 2.32.0
>
>
>
> -- 
>
> Dario Binacchi
>
> Senior Embedded Linux Developer
>
> dario.binacchi@amarulasolutions.com
>
> __________________________________
>
>
> Amarula Solutions SRL
>
> Via Le Canevare 30, 31100 Treviso, Veneto, IT
>
> T. +39 042 243 5310
> info@amarulasolutions.com
>
> www.amarulasolutions.com
Dario Binacchi Jan. 5, 2023, 1:25 p.m. UTC | #4
Hi Mattijs,

On Thu, Jan 5, 2023 at 12:03 PM Mattijs Korpershoek
<mkorpershoek@baylibre.com> wrote:
>
> On Thu, Jan 05, 2023 at 10:10, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>
> > Hi Mattijs,
> >
> > On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek
> > <mkorpershoek@baylibre.com> wrote:
> >>
> >> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
> >>
> >> > The patch fixes the following error when updating a BSH SMM S2 board:
> >> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> >> > 3:72>Okay (0.023s)
> >> > 3:72>Start Cmd:FB: reboot
> >> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
> >> >
> >> > The "fastboot reboot" command detaches the USB when it still needs to be
> >> > used. So let's detach the USB just before the reset.
> >> >
> >> > CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> >> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
> >> > Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
> >> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> >>
> >> Hi Dario,
> >>
> >> Thank you for your patch and for reporting the problem.
> >>
> >> Unfortunately, applying it seems to break the problem I tried to
> >> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
> >>
> >> Does reverting 5f7e01e9d5d800 also solves your issue?
> >
> > Yes
> >
> >>
> >> I'll spend some time on this.
> >
> > Ok, thanks. So we can test on our hardware.
>
> So historically, I wanted to make this a "arch specific fix, as
> discussed in
> https://lore.kernel.org/u-boot/20220728-reset-usb-controller-v2-0-ef7657ce78b1@baylibre.com/
>
> To me, the problem with calling g_dnl_trigger_detach() in the
> fastboot_func->in_req->complete() handler is that it's called too late.
>
> In fact, the main fastboot loop is as following:
>
>     while (1) {
>             if (g_dnl_detach())
>                     break;
>             if (ctrlc())
>                     break;
>             schedule();
>             usb_gadget_handle_interrupts(controller_index);
>      }
>       ret = CMD_RET_SUCCESS;
>
>   exit:
>       usb_gadget_release(controller_index);
>       g_dnl_unregister();
>       g_dnl_clear_detach();
>
>       return ret;
>
> usb_gadget_handle_interrupts, will at some point, call complete() which will call compl_do_reset().
> But in compl_do_reset(), we already reset the board
> (without going through the exit: section from cmd/fastboot.c)
>
> For the BSH SMM S2 board, since it's being updated with uuu,
> I assume that the host PC also triggers a call of acmd_complete() afterwards?
>
> Can you try the following diff as well, on top of your change? (for testing purposes)
>
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -492,7 +492,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>
>  static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>  {
> -       do_exit_on_complete(ep, req);
> +       usb_gadget_release(0);
>         do_reset(NULL, 0, 0, NULL);
>  }
>
> I suspect this will also break your flashing.

No, I am able to flash and reset the board.
This change works.

>
> > Regards Dario
> >
> >>
> >> >
> >> > ---
> >> >
> >> > Changes in v2:
> >> > - Add 'Suggested-by' tag.
> >> >
> >> >  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
> >> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >> >
> >> > diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> >> > index 07b1681c8a9a..0b3fae564d0a 100644
> >> > --- a/drivers/usb/gadget/f_fastboot.c
> >> > +++ b/drivers/usb/gadget/f_fastboot.c
> >> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
> >> >       return fastboot_tx_write(buffer, strlen(buffer));
> >> >  }
> >> >
> >> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> >> > -{
> >> > -     do_reset(NULL, 0, 0, NULL);
> >> > -}
> >> > -
> >> >  static unsigned int rx_bytes_expected(struct usb_ep *ep)
> >> >  {
> >> >       int rx_remain = fastboot_data_remaining();
> >> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
> >> >       do_exit_on_complete(ep, req);
> >> >  }
> >> >
> >> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> >> > +{
> >> > +     do_exit_on_complete(ep, req);
> >> > +     do_reset(NULL, 0, 0, NULL);
> >> > +}
> >> > +
> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
> >> >  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
> >> >  {
> >> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
> >> >               case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
> >> >               case FASTBOOT_COMMAND_REBOOT_RECOVERY:
> >> >                       fastboot_func->in_req->complete = compl_do_reset;
> >> > -                     g_dnl_trigger_detach();
> >> >                       break;
> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
> >> >               case FASTBOOT_COMMAND_ACMD:
> >> > --
> >> > 2.32.0
> >
> >
> >
> > --
> >
> > Dario Binacchi
> >
> > Senior Embedded Linux Developer
> >
> > dario.binacchi@amarulasolutions.com
> >
> > __________________________________
> >
> >
> > Amarula Solutions SRL
> >
> > Via Le Canevare 30, 31100 Treviso, Veneto, IT
> >
> > T. +39 042 243 5310
> > info@amarulasolutions.com
> >
> > www.amarulasolutions.com
Mattijs Korpershoek Jan. 5, 2023, 3:29 p.m. UTC | #5
On Thu, Jan 05, 2023 at 14:25, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:

> Hi Mattijs,
>
> On Thu, Jan 5, 2023 at 12:03 PM Mattijs Korpershoek
> <mkorpershoek@baylibre.com> wrote:
>>
>> On Thu, Jan 05, 2023 at 10:10, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>>
>> > Hi Mattijs,
>> >
>> > On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek
>> > <mkorpershoek@baylibre.com> wrote:
>> >>
>> >> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>> >>
>> >> > The patch fixes the following error when updating a BSH SMM S2 board:
>> >> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
>> >> > 3:72>Okay (0.023s)
>> >> > 3:72>Start Cmd:FB: reboot
>> >> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
>> >> >
>> >> > The "fastboot reboot" command detaches the USB when it still needs to be
>> >> > used. So let's detach the USB just before the reset.
>> >> >
>> >> > CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
>> >> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>> >> > Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
>> >> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>> >>
>> >> Hi Dario,
>> >>
>> >> Thank you for your patch and for reporting the problem.
>> >>
>> >> Unfortunately, applying it seems to break the problem I tried to
>> >> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>> >>
>> >> Does reverting 5f7e01e9d5d800 also solves your issue?
>> >
>> > Yes
>> >
>> >>
>> >> I'll spend some time on this.
>> >
>> > Ok, thanks. So we can test on our hardware.
>>
>> So historically, I wanted to make this a "arch specific fix, as
>> discussed in
>> https://lore.kernel.org/u-boot/20220728-reset-usb-controller-v2-0-ef7657ce78b1@baylibre.com/
>>
>> To me, the problem with calling g_dnl_trigger_detach() in the
>> fastboot_func->in_req->complete() handler is that it's called too late.
>>
>> In fact, the main fastboot loop is as following:
>>
>>     while (1) {
>>             if (g_dnl_detach())
>>                     break;
>>             if (ctrlc())
>>                     break;
>>             schedule();
>>             usb_gadget_handle_interrupts(controller_index);
>>      }
>>       ret = CMD_RET_SUCCESS;
>>
>>   exit:
>>       usb_gadget_release(controller_index);
>>       g_dnl_unregister();
>>       g_dnl_clear_detach();
>>
>>       return ret;
>>
>> usb_gadget_handle_interrupts, will at some point, call complete() which will call compl_do_reset().
>> But in compl_do_reset(), we already reset the board
>> (without going through the exit: section from cmd/fastboot.c)
>>
>> For the BSH SMM S2 board, since it's being updated with uuu,
>> I assume that the host PC also triggers a call of acmd_complete() afterwards?
>>
>> Can you try the following diff as well, on top of your change? (for testing purposes)
>>
>> --- a/drivers/usb/gadget/f_fastboot.c
>> +++ b/drivers/usb/gadget/f_fastboot.c
>> @@ -492,7 +492,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>>
>>  static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>>  {
>> -       do_exit_on_complete(ep, req);
>> +       usb_gadget_release(0);
>>         do_reset(NULL, 0, 0, NULL);
>>  }
>>
>> I suspect this will also break your flashing.
>
> No, I am able to flash and reset the board.
> This change works.

Huh. Ok. I will do some more debugging on my end. Thank you for your
patience.

>
>>
>> > Regards Dario
>> >
>> >>
>> >> >
>> >> > ---
>> >> >
>> >> > Changes in v2:
>> >> > - Add 'Suggested-by' tag.
>> >> >
>> >> >  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
>> >> >  1 file changed, 6 insertions(+), 6 deletions(-)
>> >> >
>> >> > diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
>> >> > index 07b1681c8a9a..0b3fae564d0a 100644
>> >> > --- a/drivers/usb/gadget/f_fastboot.c
>> >> > +++ b/drivers/usb/gadget/f_fastboot.c
>> >> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
>> >> >       return fastboot_tx_write(buffer, strlen(buffer));
>> >> >  }
>> >> >
>> >> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> >> > -{
>> >> > -     do_reset(NULL, 0, 0, NULL);
>> >> > -}
>> >> > -
>> >> >  static unsigned int rx_bytes_expected(struct usb_ep *ep)
>> >> >  {
>> >> >       int rx_remain = fastboot_data_remaining();
>> >> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>> >> >       do_exit_on_complete(ep, req);
>> >> >  }
>> >> >
>> >> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> >> > +{
>> >> > +     do_exit_on_complete(ep, req);
>> >> > +     do_reset(NULL, 0, 0, NULL);
>> >> > +}
>> >> > +
>> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >> >  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
>> >> >  {
>> >> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
>> >> >               case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
>> >> >               case FASTBOOT_COMMAND_REBOOT_RECOVERY:
>> >> >                       fastboot_func->in_req->complete = compl_do_reset;
>> >> > -                     g_dnl_trigger_detach();
>> >> >                       break;
>> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >> >               case FASTBOOT_COMMAND_ACMD:
>> >> > --
>> >> > 2.32.0
>> >
>> >
>> >
>> > --
>> >
>> > Dario Binacchi
>> >
>> > Senior Embedded Linux Developer
>> >
>> > dario.binacchi@amarulasolutions.com
>> >
>> > __________________________________
>> >
>> >
>> > Amarula Solutions SRL
>> >
>> > Via Le Canevare 30, 31100 Treviso, Veneto, IT
>> >
>> > T. +39 042 243 5310
>> > info@amarulasolutions.com
>> >
>> > www.amarulasolutions.com
>
>
>
> -- 
>
> Dario Binacchi
>
> Senior Embedded Linux Developer
>
> dario.binacchi@amarulasolutions.com
>
> __________________________________
>
>
> Amarula Solutions SRL
>
> Via Le Canevare 30, 31100 Treviso, Veneto, IT
>
> T. +39 042 243 5310
> info@amarulasolutions.com
>
> www.amarulasolutions.com
Mattijs Korpershoek Jan. 6, 2023, 4:42 p.m. UTC | #6
On Thu, Jan 05, 2023 at 14:25, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:

> Hi Mattijs,
>
> On Thu, Jan 5, 2023 at 12:03 PM Mattijs Korpershoek
> <mkorpershoek@baylibre.com> wrote:
>>
>> On Thu, Jan 05, 2023 at 10:10, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>>
>> > Hi Mattijs,
>> >
>> > On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek
>> > <mkorpershoek@baylibre.com> wrote:
>> >>
>> >> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>> >>
>> >> > The patch fixes the following error when updating a BSH SMM S2 board:
>> >> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
>> >> > 3:72>Okay (0.023s)
>> >> > 3:72>Start Cmd:FB: reboot
>> >> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
>> >> >
>> >> > The "fastboot reboot" command detaches the USB when it still needs to be
>> >> > used. So let's detach the USB just before the reset.
>> >> >
>> >> > CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
>> >> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>> >> > Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
>> >> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>> >>
>> >> Hi Dario,
>> >>
>> >> Thank you for your patch and for reporting the problem.
>> >>
>> >> Unfortunately, applying it seems to break the problem I tried to
>> >> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>> >>
>> >> Does reverting 5f7e01e9d5d800 also solves your issue?
>> >
>> > Yes
>> >
>> >>
>> >> I'll spend some time on this.
>> >
>> > Ok, thanks. So we can test on our hardware.
>>
>> So historically, I wanted to make this a "arch specific fix, as
>> discussed in
>> https://lore.kernel.org/u-boot/20220728-reset-usb-controller-v2-0-ef7657ce78b1@baylibre.com/
>>
>> To me, the problem with calling g_dnl_trigger_detach() in the
>> fastboot_func->in_req->complete() handler is that it's called too late.
>>
>> In fact, the main fastboot loop is as following:
>>
>>     while (1) {
>>             if (g_dnl_detach())
>>                     break;
>>             if (ctrlc())
>>                     break;
>>             schedule();
>>             usb_gadget_handle_interrupts(controller_index);
>>      }
>>       ret = CMD_RET_SUCCESS;
>>
>>   exit:
>>       usb_gadget_release(controller_index);
>>       g_dnl_unregister();
>>       g_dnl_clear_detach();
>>
>>       return ret;
>>
>> usb_gadget_handle_interrupts, will at some point, call complete() which will call compl_do_reset().
>> But in compl_do_reset(), we already reset the board
>> (without going through the exit: section from cmd/fastboot.c)
>>
>> For the BSH SMM S2 board, since it's being updated with uuu,
>> I assume that the host PC also triggers a call of acmd_complete() afterwards?
>>
>> Can you try the following diff as well, on top of your change? (for testing purposes)
>>
>> --- a/drivers/usb/gadget/f_fastboot.c
>> +++ b/drivers/usb/gadget/f_fastboot.c
>> @@ -492,7 +492,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>>
>>  static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>>  {
>> -       do_exit_on_complete(ep, req);
>> +       usb_gadget_release(0);
>>         do_reset(NULL, 0, 0, NULL);
>>  }
>>
>> I suspect this will also break your flashing.
>
> No, I am able to flash and reset the board.
> This change works.

With some additional testing on my end, I can see that the final message
(sending OKAY to the host) done on fastboot_func->in_ep is not done on
my end. I think I am lucky that my controller driver (dwc2_udc_otg)
delivers the message to my host anyways and calls done() even when
messages are aborted.

I think I have something that might be better.

Dario, could you do another test for me, please?
1. Revert 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")

2. Apply the following diff:

diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index d0e92c7a071f..f4311328a2da 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -421,6 +421,7 @@ static int fastboot_tx_write_str(const char *buffer)
 
 static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
 {
+       g_dnl_unregister();
        do_reset(NULL, 0, 0, NULL);
 }

The call to g_dnl_unregister() will end up calling
g_dnl_unbind() which calls usb_gadget_disconnect()
where each controller can implement a soft disconnect (which I can do
for dwc2_udc_otg)

>
>>
>> > Regards Dario
>> >
>> >>
>> >> >
>> >> > ---
>> >> >
>> >> > Changes in v2:
>> >> > - Add 'Suggested-by' tag.
>> >> >
>> >> >  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
>> >> >  1 file changed, 6 insertions(+), 6 deletions(-)
>> >> >
>> >> > diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
>> >> > index 07b1681c8a9a..0b3fae564d0a 100644
>> >> > --- a/drivers/usb/gadget/f_fastboot.c
>> >> > +++ b/drivers/usb/gadget/f_fastboot.c
>> >> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
>> >> >       return fastboot_tx_write(buffer, strlen(buffer));
>> >> >  }
>> >> >
>> >> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> >> > -{
>> >> > -     do_reset(NULL, 0, 0, NULL);
>> >> > -}
>> >> > -
>> >> >  static unsigned int rx_bytes_expected(struct usb_ep *ep)
>> >> >  {
>> >> >       int rx_remain = fastboot_data_remaining();
>> >> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>> >> >       do_exit_on_complete(ep, req);
>> >> >  }
>> >> >
>> >> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> >> > +{
>> >> > +     do_exit_on_complete(ep, req);
>> >> > +     do_reset(NULL, 0, 0, NULL);
>> >> > +}
>> >> > +
>> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >> >  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
>> >> >  {
>> >> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
>> >> >               case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
>> >> >               case FASTBOOT_COMMAND_REBOOT_RECOVERY:
>> >> >                       fastboot_func->in_req->complete = compl_do_reset;
>> >> > -                     g_dnl_trigger_detach();
>> >> >                       break;
>> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >> >               case FASTBOOT_COMMAND_ACMD:
>> >> > --
>> >> > 2.32.0
>> >
>> >
>> >
>> > --
>> >
>> > Dario Binacchi
>> >
>> > Senior Embedded Linux Developer
>> >
>> > dario.binacchi@amarulasolutions.com
>> >
>> > __________________________________
>> >
>> >
>> > Amarula Solutions SRL
>> >
>> > Via Le Canevare 30, 31100 Treviso, Veneto, IT
>> >
>> > T. +39 042 243 5310
>> > info@amarulasolutions.com
>> >
>> > www.amarulasolutions.com
>
>
>
> -- 
>
> Dario Binacchi
>
> Senior Embedded Linux Developer
>
> dario.binacchi@amarulasolutions.com
>
> __________________________________
>
>
> Amarula Solutions SRL
>
> Via Le Canevare 30, 31100 Treviso, Veneto, IT
>
> T. +39 042 243 5310
> info@amarulasolutions.com
>
> www.amarulasolutions.com
Dario Binacchi Jan. 7, 2023, 4:45 p.m. UTC | #7
Hi Mattijs,

On Fri, Jan 6, 2023 at 5:42 PM Mattijs Korpershoek
<mkorpershoek@baylibre.com> wrote:
>
> On Thu, Jan 05, 2023 at 14:25, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>
> > Hi Mattijs,
> >
> > On Thu, Jan 5, 2023 at 12:03 PM Mattijs Korpershoek
> > <mkorpershoek@baylibre.com> wrote:
> >>
> >> On Thu, Jan 05, 2023 at 10:10, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
> >>
> >> > Hi Mattijs,
> >> >
> >> > On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek
> >> > <mkorpershoek@baylibre.com> wrote:
> >> >>
> >> >> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
> >> >>
> >> >> > The patch fixes the following error when updating a BSH SMM S2 board:
> >> >> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> >> >> > 3:72>Okay (0.023s)
> >> >> > 3:72>Start Cmd:FB: reboot
> >> >> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
> >> >> >
> >> >> > The "fastboot reboot" command detaches the USB when it still needs to be
> >> >> > used. So let's detach the USB just before the reset.
> >> >> >
> >> >> > CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> >> >> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
> >> >> > Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
> >> >> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> >> >>
> >> >> Hi Dario,
> >> >>
> >> >> Thank you for your patch and for reporting the problem.
> >> >>
> >> >> Unfortunately, applying it seems to break the problem I tried to
> >> >> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
> >> >>
> >> >> Does reverting 5f7e01e9d5d800 also solves your issue?
> >> >
> >> > Yes
> >> >
> >> >>
> >> >> I'll spend some time on this.
> >> >
> >> > Ok, thanks. So we can test on our hardware.
> >>
> >> So historically, I wanted to make this a "arch specific fix, as
> >> discussed in
> >> https://lore.kernel.org/u-boot/20220728-reset-usb-controller-v2-0-ef7657ce78b1@baylibre.com/
> >>
> >> To me, the problem with calling g_dnl_trigger_detach() in the
> >> fastboot_func->in_req->complete() handler is that it's called too late.
> >>
> >> In fact, the main fastboot loop is as following:
> >>
> >>     while (1) {
> >>             if (g_dnl_detach())
> >>                     break;
> >>             if (ctrlc())
> >>                     break;
> >>             schedule();
> >>             usb_gadget_handle_interrupts(controller_index);
> >>      }
> >>       ret = CMD_RET_SUCCESS;
> >>
> >>   exit:
> >>       usb_gadget_release(controller_index);
> >>       g_dnl_unregister();
> >>       g_dnl_clear_detach();
> >>
> >>       return ret;
> >>
> >> usb_gadget_handle_interrupts, will at some point, call complete() which will call compl_do_reset().
> >> But in compl_do_reset(), we already reset the board
> >> (without going through the exit: section from cmd/fastboot.c)
> >>
> >> For the BSH SMM S2 board, since it's being updated with uuu,
> >> I assume that the host PC also triggers a call of acmd_complete() afterwards?
> >>
> >> Can you try the following diff as well, on top of your change? (for testing purposes)
> >>
> >> --- a/drivers/usb/gadget/f_fastboot.c
> >> +++ b/drivers/usb/gadget/f_fastboot.c
> >> @@ -492,7 +492,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
> >>
> >>  static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> >>  {
> >> -       do_exit_on_complete(ep, req);
> >> +       usb_gadget_release(0);
> >>         do_reset(NULL, 0, 0, NULL);
> >>  }
> >>
> >> I suspect this will also break your flashing.
> >
> > No, I am able to flash and reset the board.
> > This change works.
>
> With some additional testing on my end, I can see that the final message
> (sending OKAY to the host) done on fastboot_func->in_ep is not done on
> my end. I think I am lucky that my controller driver (dwc2_udc_otg)
> delivers the message to my host anyways and calls done() even when
> messages are aborted.
>
> I think I have something that might be better.
>
> Dario, could you do another test for me, please?
> 1. Revert 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>
> 2. Apply the following diff:
>
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index d0e92c7a071f..f4311328a2da 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -421,6 +421,7 @@ static int fastboot_tx_write_str(const char *buffer)
>
>  static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>  {
> +       g_dnl_unregister();
>         do_reset(NULL, 0, 0, NULL);
>  }
>
I applied your diff and it runs.
I changed my patch with your suggestion.
I'll submit v3.
The patch can be applied without reverting 5f7e01e9d5d800.
Can you re-test and apply your tested-by tag?
I added the Co-developed-by tag too.
Do you think it is correct to proceed like this?

Thanks and regards,
Dario

> The call to g_dnl_unregister() will end up calling
> g_dnl_unbind() which calls usb_gadget_disconnect()
> where each controller can implement a soft disconnect (which I can do
> for dwc2_udc_otg)
>
> >
> >>
> >> > Regards Dario
> >> >
> >> >>
> >> >> >
> >> >> > ---
> >> >> >
> >> >> > Changes in v2:
> >> >> > - Add 'Suggested-by' tag.
> >> >> >
> >> >> >  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
> >> >> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >> >> >
> >> >> > diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> >> >> > index 07b1681c8a9a..0b3fae564d0a 100644
> >> >> > --- a/drivers/usb/gadget/f_fastboot.c
> >> >> > +++ b/drivers/usb/gadget/f_fastboot.c
> >> >> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
> >> >> >       return fastboot_tx_write(buffer, strlen(buffer));
> >> >> >  }
> >> >> >
> >> >> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> >> >> > -{
> >> >> > -     do_reset(NULL, 0, 0, NULL);
> >> >> > -}
> >> >> > -
> >> >> >  static unsigned int rx_bytes_expected(struct usb_ep *ep)
> >> >> >  {
> >> >> >       int rx_remain = fastboot_data_remaining();
> >> >> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
> >> >> >       do_exit_on_complete(ep, req);
> >> >> >  }
> >> >> >
> >> >> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
> >> >> > +{
> >> >> > +     do_exit_on_complete(ep, req);
> >> >> > +     do_reset(NULL, 0, 0, NULL);
> >> >> > +}
> >> >> > +
> >> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
> >> >> >  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
> >> >> >  {
> >> >> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
> >> >> >               case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
> >> >> >               case FASTBOOT_COMMAND_REBOOT_RECOVERY:
> >> >> >                       fastboot_func->in_req->complete = compl_do_reset;
> >> >> > -                     g_dnl_trigger_detach();
> >> >> >                       break;
> >> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
> >> >> >               case FASTBOOT_COMMAND_ACMD:
> >> >> > --
> >> >> > 2.32.0
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> > Dario Binacchi
> >> >
> >> > Senior Embedded Linux Developer
> >> >
> >> > dario.binacchi@amarulasolutions.com
> >> >
> >> > __________________________________
> >> >
> >> >
> >> > Amarula Solutions SRL
> >> >
> >> > Via Le Canevare 30, 31100 Treviso, Veneto, IT
> >> >
> >> > T. +39 042 243 5310
> >> > info@amarulasolutions.com
> >> >
> >> > www.amarulasolutions.com
> >
> >
> >
> > --
> >
> > Dario Binacchi
> >
> > Senior Embedded Linux Developer
> >
> > dario.binacchi@amarulasolutions.com
> >
> > __________________________________
> >
> >
> > Amarula Solutions SRL
> >
> > Via Le Canevare 30, 31100 Treviso, Veneto, IT
> >
> > T. +39 042 243 5310
> > info@amarulasolutions.com
> >
> > www.amarulasolutions.com
Mattijs Korpershoek Jan. 10, 2023, 8:29 a.m. UTC | #8
Hi Dario,

On Sat, Jan 07, 2023 at 17:45, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:

> Hi Mattijs,
>
> On Fri, Jan 6, 2023 at 5:42 PM Mattijs Korpershoek
> <mkorpershoek@baylibre.com> wrote:
>>
>> On Thu, Jan 05, 2023 at 14:25, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>>
>> > Hi Mattijs,
>> >
>> > On Thu, Jan 5, 2023 at 12:03 PM Mattijs Korpershoek
>> > <mkorpershoek@baylibre.com> wrote:
>> >>
>> >> On Thu, Jan 05, 2023 at 10:10, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>> >>
>> >> > Hi Mattijs,
>> >> >
>> >> > On Thu, Jan 5, 2023 at 10:06 AM Mattijs Korpershoek
>> >> > <mkorpershoek@baylibre.com> wrote:
>> >> >>
>> >> >> On Wed, Jan 04, 2023 at 17:46, Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:
>> >> >>
>> >> >> > The patch fixes the following error when updating a BSH SMM S2 board:
>> >> >> > 3:72>Start Cmd:FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
>> >> >> > 3:72>Okay (0.023s)
>> >> >> > 3:72>Start Cmd:FB: reboot
>> >> >> > 3:72>Fail Bulk(R):LIBUSB_ERROR_IO(0s)
>> >> >> >
>> >> >> > The "fastboot reboot" command detaches the USB when it still needs to be
>> >> >> > used. So let's detach the USB just before the reset.
>> >> >> >
>> >> >> > CC: Mattijs Korpershoek <mkorpershoek@baylibre.com>
>> >> >> > Fixes: 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>> >> >> > Suggested-by: Michael Trimarchi <michael@amarulasolutions.com>
>> >> >> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>> >> >>
>> >> >> Hi Dario,
>> >> >>
>> >> >> Thank you for your patch and for reporting the problem.
>> >> >>
>> >> >> Unfortunately, applying it seems to break the problem I tried to
>> >> >> solve with 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>> >> >>
>> >> >> Does reverting 5f7e01e9d5d800 also solves your issue?
>> >> >
>> >> > Yes
>> >> >
>> >> >>
>> >> >> I'll spend some time on this.
>> >> >
>> >> > Ok, thanks. So we can test on our hardware.
>> >>
>> >> So historically, I wanted to make this a "arch specific fix, as
>> >> discussed in
>> >> https://lore.kernel.org/u-boot/20220728-reset-usb-controller-v2-0-ef7657ce78b1@baylibre.com/
>> >>
>> >> To me, the problem with calling g_dnl_trigger_detach() in the
>> >> fastboot_func->in_req->complete() handler is that it's called too late.
>> >>
>> >> In fact, the main fastboot loop is as following:
>> >>
>> >>     while (1) {
>> >>             if (g_dnl_detach())
>> >>                     break;
>> >>             if (ctrlc())
>> >>                     break;
>> >>             schedule();
>> >>             usb_gadget_handle_interrupts(controller_index);
>> >>      }
>> >>       ret = CMD_RET_SUCCESS;
>> >>
>> >>   exit:
>> >>       usb_gadget_release(controller_index);
>> >>       g_dnl_unregister();
>> >>       g_dnl_clear_detach();
>> >>
>> >>       return ret;
>> >>
>> >> usb_gadget_handle_interrupts, will at some point, call complete() which will call compl_do_reset().
>> >> But in compl_do_reset(), we already reset the board
>> >> (without going through the exit: section from cmd/fastboot.c)
>> >>
>> >> For the BSH SMM S2 board, since it's being updated with uuu,
>> >> I assume that the host PC also triggers a call of acmd_complete() afterwards?
>> >>
>> >> Can you try the following diff as well, on top of your change? (for testing purposes)
>> >>
>> >> --- a/drivers/usb/gadget/f_fastboot.c
>> >> +++ b/drivers/usb/gadget/f_fastboot.c
>> >> @@ -492,7 +492,7 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>> >>
>> >>  static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> >>  {
>> >> -       do_exit_on_complete(ep, req);
>> >> +       usb_gadget_release(0);
>> >>         do_reset(NULL, 0, 0, NULL);
>> >>  }
>> >>
>> >> I suspect this will also break your flashing.
>> >
>> > No, I am able to flash and reset the board.
>> > This change works.
>>
>> With some additional testing on my end, I can see that the final message
>> (sending OKAY to the host) done on fastboot_func->in_ep is not done on
>> my end. I think I am lucky that my controller driver (dwc2_udc_otg)
>> delivers the message to my host anyways and calls done() even when
>> messages are aborted.
>>
>> I think I have something that might be better.
>>
>> Dario, could you do another test for me, please?
>> 1. Revert 5f7e01e9d5d800 ("usb: gadget: fastboot: detach usb on reboot commands")
>>
>> 2. Apply the following diff:
>>
>> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
>> index d0e92c7a071f..f4311328a2da 100644
>> --- a/drivers/usb/gadget/f_fastboot.c
>> +++ b/drivers/usb/gadget/f_fastboot.c
>> @@ -421,6 +421,7 @@ static int fastboot_tx_write_str(const char *buffer)
>>
>>  static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>>  {
>> +       g_dnl_unregister();
>>         do_reset(NULL, 0, 0, NULL);
>>  }
>>
> I applied your diff and it runs.
> I changed my patch with your suggestion.
> I'll submit v3.
> The patch can be applied without reverting 5f7e01e9d5d800.
> Can you re-test and apply your tested-by tag?
> I added the Co-developed-by tag too.
> Do you think it is correct to proceed like this?

Yes it's ok to proceed like this.

>
> Thanks and regards,
> Dario
>
>> The call to g_dnl_unregister() will end up calling
>> g_dnl_unbind() which calls usb_gadget_disconnect()
>> where each controller can implement a soft disconnect (which I can do
>> for dwc2_udc_otg)
>>
>> >
>> >>
>> >> > Regards Dario
>> >> >
>> >> >>
>> >> >> >
>> >> >> > ---
>> >> >> >
>> >> >> > Changes in v2:
>> >> >> > - Add 'Suggested-by' tag.
>> >> >> >
>> >> >> >  drivers/usb/gadget/f_fastboot.c | 12 ++++++------
>> >> >> >  1 file changed, 6 insertions(+), 6 deletions(-)
>> >> >> >
>> >> >> > diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
>> >> >> > index 07b1681c8a9a..0b3fae564d0a 100644
>> >> >> > --- a/drivers/usb/gadget/f_fastboot.c
>> >> >> > +++ b/drivers/usb/gadget/f_fastboot.c
>> >> >> > @@ -419,11 +419,6 @@ static int fastboot_tx_write_str(const char *buffer)
>> >> >> >       return fastboot_tx_write(buffer, strlen(buffer));
>> >> >> >  }
>> >> >> >
>> >> >> > -static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> >> >> > -{
>> >> >> > -     do_reset(NULL, 0, 0, NULL);
>> >> >> > -}
>> >> >> > -
>> >> >> >  static unsigned int rx_bytes_expected(struct usb_ep *ep)
>> >> >> >  {
>> >> >> >       int rx_remain = fastboot_data_remaining();
>> >> >> > @@ -495,6 +490,12 @@ static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
>> >> >> >       do_exit_on_complete(ep, req);
>> >> >> >  }
>> >> >> >
>> >> >> > +static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>> >> >> > +{
>> >> >> > +     do_exit_on_complete(ep, req);
>> >> >> > +     do_reset(NULL, 0, 0, NULL);
>> >> >> > +}
>> >> >> > +
>> >> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >> >> >  static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
>> >> >> >  {
>> >> >> > @@ -544,7 +545,6 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
>> >> >> >               case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
>> >> >> >               case FASTBOOT_COMMAND_REBOOT_RECOVERY:
>> >> >> >                       fastboot_func->in_req->complete = compl_do_reset;
>> >> >> > -                     g_dnl_trigger_detach();
>> >> >> >                       break;
>> >> >> >  #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
>> >> >> >               case FASTBOOT_COMMAND_ACMD:
>> >> >> > --
>> >> >> > 2.32.0
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> >
>> >> > Dario Binacchi
>> >> >
>> >> > Senior Embedded Linux Developer
>> >> >
>> >> > dario.binacchi@amarulasolutions.com
>> >> >
>> >> > __________________________________
>> >> >
>> >> >
>> >> > Amarula Solutions SRL
>> >> >
>> >> > Via Le Canevare 30, 31100 Treviso, Veneto, IT
>> >> >
>> >> > T. +39 042 243 5310
>> >> > info@amarulasolutions.com
>> >> >
>> >> > www.amarulasolutions.com
>> >
>> >
>> >
>> > --
>> >
>> > Dario Binacchi
>> >
>> > Senior Embedded Linux Developer
>> >
>> > dario.binacchi@amarulasolutions.com
>> >
>> > __________________________________
>> >
>> >
>> > Amarula Solutions SRL
>> >
>> > Via Le Canevare 30, 31100 Treviso, Veneto, IT
>> >
>> > T. +39 042 243 5310
>> > info@amarulasolutions.com
>> >
>> > www.amarulasolutions.com
>
>
>
> -- 
>
> Dario Binacchi
>
> Senior Embedded Linux Developer
>
> dario.binacchi@amarulasolutions.com
>
> __________________________________
>
>
> Amarula Solutions SRL
>
> Via Le Canevare 30, 31100 Treviso, Veneto, IT
>
> T. +39 042 243 5310
> info@amarulasolutions.com
>
> www.amarulasolutions.com

Patch

diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index 07b1681c8a9a..0b3fae564d0a 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -419,11 +419,6 @@  static int fastboot_tx_write_str(const char *buffer)
 	return fastboot_tx_write(buffer, strlen(buffer));
 }
 
-static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
-{
-	do_reset(NULL, 0, 0, NULL);
-}
-
 static unsigned int rx_bytes_expected(struct usb_ep *ep)
 {
 	int rx_remain = fastboot_data_remaining();
@@ -495,6 +490,12 @@  static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
 	do_exit_on_complete(ep, req);
 }
 
+static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
+{
+	do_exit_on_complete(ep, req);
+	do_reset(NULL, 0, 0, NULL);
+}
+
 #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
 static void do_acmd_complete(struct usb_ep *ep, struct usb_request *req)
 {
@@ -544,7 +545,6 @@  static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
 		case FASTBOOT_COMMAND_REBOOT_FASTBOOTD:
 		case FASTBOOT_COMMAND_REBOOT_RECOVERY:
 			fastboot_func->in_req->complete = compl_do_reset;
-			g_dnl_trigger_detach();
 			break;
 #if CONFIG_IS_ENABLED(FASTBOOT_UUU_SUPPORT)
 		case FASTBOOT_COMMAND_ACMD: