[v3,2/4] ARM: dts: stm32: add pin map for LTDC on stm32f7
diff mbox series

Message ID 20230609062050.2107143-3-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • Add display support on the stm32f746-disco board
Related show

Commit Message

Dario Binacchi June 9, 2023, 6:20 a.m. UTC 
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v3:
- rename ltdc-pins-a-0 to ltdc-0.

 arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Comments

Raphael Gallais-Pou June 9, 2023, 2:23 p.m. UTC | #1 
On 6/9/23 08:20, Dario Binacchi wrote:
> Add pin configurations for using LTDC (LCD-tft Display Controller) on
> stm32f746-disco board.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
>
> ---
>
> Changes in v3:
> - rename ltdc-pins-a-0 to ltdc-0.
>
>  arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)

Patch
diff mbox series 

diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9f65403295ca..36dad40dd0c7 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -365,6 +365,41 @@  pins2 {
 					bias-pull-up;
 				};
 			};
+
+
+			ltdc_pins_a: ltdc-0 {
+				pins {
+					pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
+						 <STM32_PINMUX('G',12, AF9)>,  /* LCD_B4 */
+						 <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
+						 <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
+						 <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+						 <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+						 <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+						 <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+						 <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+						 <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+						 <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+						 <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+						 <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+						 <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+						 <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
+						 <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
+						 <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
+						 <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
+						 <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
+						 <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+						 <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+						 <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+						 <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+						 <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+						 <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+						 <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
 		};
 	};
 };