| Message ID | 20230903204849.660722-9-dario.binacchi@amarulasolutions.com |
|---|---|
| State | New |
| Headers | show |
| Series |
|
| Related | show |
On 9/3/23 22:48, Dario Binacchi wrote: > commit ba287d1a0137702a224b1f48673d529257b3c4bf Linux upstream. > > Add pin configurations for using LTDC (LCD-tft Display Controller) on > stm32f746-disco board. > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com> > Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> > --- > > arch/arm/dts/stm32f7-pinctrl.dtsi | 34 +++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm/dts/stm32f7-pinctrl.dtsi b/arch/arm/dts/stm32f7-pinctrl.dtsi > index 607fe42f4f46..d3706ee33b5f 100644 > --- a/arch/arm/dts/stm32f7-pinctrl.dtsi > +++ b/arch/arm/dts/stm32f7-pinctrl.dtsi > @@ -376,6 +376,40 @@ > bias-pull-up; > }; > }; > + > + ltdc_pins_a: ltdc-0 { > + pins { > + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */ > + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */ > + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ > + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */ > + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */ > + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */ > + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ > + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ > + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ > + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ > + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ > + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ > + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ > + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ > + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ > + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ > + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */ > + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */ > + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */ > + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */ > + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */ > + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ > + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ > + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ > + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ > + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ > + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */ > + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */ > + slew-rate = <2>; > + }; > + }; > }; > }; > }; Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Thanks Patrice
On 9/3/23 22:48, Dario Binacchi wrote: > commit ba287d1a0137702a224b1f48673d529257b3c4bf Linux upstream. > > Add pin configurations for using LTDC (LCD-tft Display Controller) on > stm32f746-disco board. > > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com> > Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> > --- > > arch/arm/dts/stm32f7-pinctrl.dtsi | 34 +++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm/dts/stm32f7-pinctrl.dtsi b/arch/arm/dts/stm32f7-pinctrl.dtsi > index 607fe42f4f46..d3706ee33b5f 100644 > --- a/arch/arm/dts/stm32f7-pinctrl.dtsi > +++ b/arch/arm/dts/stm32f7-pinctrl.dtsi > @@ -376,6 +376,40 @@ > bias-pull-up; > }; > }; > + > + ltdc_pins_a: ltdc-0 { > + pins { > + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */ > + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */ > + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ > + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */ > + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */ > + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */ > + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ > + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ > + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ > + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ > + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ > + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ > + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ > + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ > + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ > + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ > + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */ > + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */ > + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */ > + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */ > + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */ > + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ > + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ > + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ > + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ > + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ > + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */ > + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */ > + slew-rate = <2>; > + }; > + }; > }; > }; > }; Apply on stm32/next Thanks Patrice
diff --git a/arch/arm/dts/stm32f7-pinctrl.dtsi b/arch/arm/dts/stm32f7-pinctrl.dtsi index 607fe42f4f46..d3706ee33b5f 100644 --- a/arch/arm/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/dts/stm32f7-pinctrl.dtsi @@ -376,6 +376,40 @@ bias-pull-up; }; }; + + ltdc_pins_a: ltdc-0 { + pins { + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */ + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */ + slew-rate = <2>; + }; + }; }; }; };