| Message ID | 20240301133620.3547430-1-dario.binacchi@amarulasolutions.com |
|---|---|
| Headers | show |
| Series |
|
| Related | show |
Hi Dario, On Fri, Mar 01, 2024 at 02:35:57PM +0100, Dario Binacchi wrote: > The SK-AM62B-P1 is the newest version of SK-AM62 which includes > high-security field-securable (HS-FS) silicon to optionally customize keys > and encryption for security applications. > This requires enabling the BR2_TARGET_TI_K3_IMAGE_GEN_SECTYPE_HS_FS option, > which, however, was buggy. This series fixes the errors and bumps the Linux > kernel and U-Boot required for such a new device. > > Furthermore, this version complete the series by updating the > ti_am64x_sk_defconfig too and remove ti-k3-image-gen, as requested by > Romain Naour: > https://patchwork.ozlabs.org/project/buildroot/patch/20240224205654.1546744-17-dario.binacchi@amarulasolutions.com/ > I have successfully executed compilation tests for all possible combinations of platform and security type: > am62x -> GP, HS, HS-FS > am64x -> GP, HS, HS-FS Thank you for the changes and the updated submission. I'll build and boot-test your v8 on all 4 hardware variants of the above platforms and report back before the end of this weekend. Also yesterday I was able to get graphics to work on AM62x with a few patches based on top of your v7 series, using the Imagination Rogue Power VR GPU driver and Mesa, and was able to run (accelerated) Weston. Will pobably submit an RFC of this next week. -- Andreas Dannenberg Texas Instruments Inc > > The AM62x HS-FS configuration has also been tested on the SK-AM62B-P1 board. > > Dario Binacchi (22): > configs/ti_am62x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > setting > configs/ti_am64x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > setting > configs/ti_am62x_sk_defconfig: explicitly set the ti-k3-r5-loader > version > configs/ti_am64x_sk_defconfig: explicitly set the ti-k3-r5-loader > version > boot/ti-k3-r5-loader: bump to version 2024.01 > package/python-attrs: add host variant > package/python-rpds-py: add host variant > package/python-referencing: add host variant > package/python-jsonschema-specifications: add host variant > package/python-jsonschema: add host variant > boot/ti-k3-r5-loader: set binman environment > boot/uboot: add BR2_TARGET_UBOOT_USE_BINMAN option > package/ti-k3: move TI_K3_{SECTYPE,SOC} out of the image-gen scope > package/ti-k3: disable HS-FS for AM65 SOC > boot/ti-k3/ti-k3-r5-loader: install tiboot3.bin > configs/ti_am62x_sk_defconfig: bump U-Boot version to 2024.01 > configs/ti_am62x_sk_defconfig: bump Linux version to 6.6.18 > board/ti/am62x-sk: generalize post-build.sh > board/ti/am62x-sk: move post-{build,image}.sh to board/ti/common/am6xx > package/ti-k3: fix BR2_PACKAGE_TI_K3_SOC setting for am64x SOC > configs/ti_am64x_sk_defconfig: bump U-Boot version to 2024.01 > configs/ti_am64x_sk_defconfig: bump Linux version to 6.6.18 > > Romain Naour (1): > boot/ti-k3-image-gen: remove package > > Config.in.legacy | 7 ++ > DEVELOPERS | 2 - > board/ti/am62x-sk/genimage.cfg | 7 +- > board/ti/am64x-sk/genimage.cfg | 7 +- > board/ti/common/am6xx/post-build.sh | 58 ++++++++++++++ > board/ti/common/am6xx/post-image.sh | 11 +++ > boot/Config.in | 1 - > boot/ti-k3-image-gen/Config.in | 77 ------------------- > boot/ti-k3-image-gen/ti-k3-image-gen.hash | 3 - > boot/ti-k3-image-gen/ti-k3-image-gen.mk | 54 ------------- > boot/ti-k3-r5-loader/Config.in | 5 +- > boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 +- > boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 12 ++- > boot/uboot/Config.in | 23 +++--- > boot/uboot/uboot.mk | 12 ++- > configs/ti_am62x_sk_defconfig | 22 +++--- > configs/ti_am64x_sk_defconfig | 22 +++--- > package/Config.in | 1 + > package/python-attrs/python-attrs.mk | 6 ++ > .../python-jsonschema-specifications.mk | 10 +++ > .../python-jsonschema/python-jsonschema.mk | 14 ++++ > .../python-referencing/python-referencing.mk | 11 +++ > package/python-rpds-py/python-rpds-py.mk | 1 + > package/ti-k3/Config.in | 61 +++++++++++++++ > package/ti-k3/ti-k3.mk | 7 ++ > 25 files changed, 263 insertions(+), 173 deletions(-) > create mode 100755 board/ti/common/am6xx/post-build.sh > create mode 100755 board/ti/common/am6xx/post-image.sh > delete mode 100644 boot/ti-k3-image-gen/Config.in > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.hash > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.mk > create mode 100644 package/ti-k3/Config.in > create mode 100644 package/ti-k3/ti-k3.mk > > -- > 2.43.0 >
Hi Dario, On Fri, Mar 01, 2024 at 07:22:53PM -0600, Andreas Dannenberg via buildroot wrote: > Hi Dario, > > On Fri, Mar 01, 2024 at 02:35:57PM +0100, Dario Binacchi wrote: > > The SK-AM62B-P1 is the newest version of SK-AM62 which includes > > high-security field-securable (HS-FS) silicon to optionally customize keys > > and encryption for security applications. > > This requires enabling the BR2_TARGET_TI_K3_IMAGE_GEN_SECTYPE_HS_FS option, > > which, however, was buggy. This series fixes the errors and bumps the Linux > > kernel and U-Boot required for such a new device. > > > > Furthermore, this version complete the series by updating the > > ti_am64x_sk_defconfig too and remove ti-k3-image-gen, as requested by > > Romain Naour: > > https://patchwork.ozlabs.org/project/buildroot/patch/20240224205654.1546744-17-dario.binacchi@amarulasolutions.com/ > > I have successfully executed compilation tests for all possible combinations of platform and security type: > > am62x -> GP, HS, HS-FS > > am64x -> GP, HS, HS-FS > > Thank you for the changes and the updated submission. I'll build and > boot-test your v8 on all 4 hardware variants of the above platforms > and report back before the end of this weekend. I just finished build and boot testing all 4 device/security combinations without any issues: 1) AM62 GP 2) AM62 HS-FS 3) AM64 GP 4) AM64 HS-FS For this I applied your v8 series on top of... 75a3562324 ("support/scripts/pkg-stats: sort CVEs in HTML output") ...and performed 4 individual completely clean builds. Then, I boot tested all 4 SD card images on the respective HW platforms (4 different SK boards). The boot logs of each case look pretty clean and about as expected and I've archived them here [1] if somebody is curious. While the boot logs show there's further work needed (e.g., updating TIFS/DM device firmwares to more current versions, enabling/ fixing power off functionality) all what I saw should be done as future work and not as part of this series. I think it does a great job making those device families accessible and enabling said further development. So for the series: Tested-by: Andreas Dannenberg <dannenberg@ti.com> [1] https://gist.github.com/adannenb-ti/35feca65e7d86a7e062a36c48efddc63 > Also yesterday I was able to get graphics to work on AM62x with a few > patches based on top of your v7 series, using the Imagination Rogue > Power VR GPU driver and Mesa, and was able to run (accelerated) Weston. > Will pobably submit an RFC of this next week. > > -- > Andreas Dannenberg > Texas Instruments Inc > > > > > > The AM62x HS-FS configuration has also been tested on the SK-AM62B-P1 board. > > > > Dario Binacchi (22): > > configs/ti_am62x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > > setting > > configs/ti_am64x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > > setting > > configs/ti_am62x_sk_defconfig: explicitly set the ti-k3-r5-loader > > version > > configs/ti_am64x_sk_defconfig: explicitly set the ti-k3-r5-loader > > version > > boot/ti-k3-r5-loader: bump to version 2024.01 > > package/python-attrs: add host variant > > package/python-rpds-py: add host variant > > package/python-referencing: add host variant > > package/python-jsonschema-specifications: add host variant > > package/python-jsonschema: add host variant > > boot/ti-k3-r5-loader: set binman environment > > boot/uboot: add BR2_TARGET_UBOOT_USE_BINMAN option > > package/ti-k3: move TI_K3_{SECTYPE,SOC} out of the image-gen scope > > package/ti-k3: disable HS-FS for AM65 SOC > > boot/ti-k3/ti-k3-r5-loader: install tiboot3.bin > > configs/ti_am62x_sk_defconfig: bump U-Boot version to 2024.01 > > configs/ti_am62x_sk_defconfig: bump Linux version to 6.6.18 > > board/ti/am62x-sk: generalize post-build.sh > > board/ti/am62x-sk: move post-{build,image}.sh to board/ti/common/am6xx > > package/ti-k3: fix BR2_PACKAGE_TI_K3_SOC setting for am64x SOC > > configs/ti_am64x_sk_defconfig: bump U-Boot version to 2024.01 > > configs/ti_am64x_sk_defconfig: bump Linux version to 6.6.18 > > > > Romain Naour (1): > > boot/ti-k3-image-gen: remove package > > > > Config.in.legacy | 7 ++ > > DEVELOPERS | 2 - > > board/ti/am62x-sk/genimage.cfg | 7 +- > > board/ti/am64x-sk/genimage.cfg | 7 +- > > board/ti/common/am6xx/post-build.sh | 58 ++++++++++++++ > > board/ti/common/am6xx/post-image.sh | 11 +++ > > boot/Config.in | 1 - > > boot/ti-k3-image-gen/Config.in | 77 ------------------- > > boot/ti-k3-image-gen/ti-k3-image-gen.hash | 3 - > > boot/ti-k3-image-gen/ti-k3-image-gen.mk | 54 ------------- > > boot/ti-k3-r5-loader/Config.in | 5 +- > > boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 +- > > boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 12 ++- > > boot/uboot/Config.in | 23 +++--- > > boot/uboot/uboot.mk | 12 ++- > > configs/ti_am62x_sk_defconfig | 22 +++--- > > configs/ti_am64x_sk_defconfig | 22 +++--- > > package/Config.in | 1 + > > package/python-attrs/python-attrs.mk | 6 ++ > > .../python-jsonschema-specifications.mk | 10 +++ > > .../python-jsonschema/python-jsonschema.mk | 14 ++++ > > .../python-referencing/python-referencing.mk | 11 +++ > > package/python-rpds-py/python-rpds-py.mk | 1 + > > package/ti-k3/Config.in | 61 +++++++++++++++ > > package/ti-k3/ti-k3.mk | 7 ++ > > 25 files changed, 263 insertions(+), 173 deletions(-) > > create mode 100755 board/ti/common/am6xx/post-build.sh > > create mode 100755 board/ti/common/am6xx/post-image.sh > > delete mode 100644 boot/ti-k3-image-gen/Config.in > > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.hash > > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.mk > > create mode 100644 package/ti-k3/Config.in > > create mode 100644 package/ti-k3/ti-k3.mk > > > > -- > > 2.43.0 > > > _______________________________________________ > buildroot mailing list > buildroot@buildroot.org > https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Andreas, On Sat, Mar 2, 2024 at 8:11 AM Andreas Dannenberg <dannenberg@ti.com> wrote: > > Hi Dario, > > On Fri, Mar 01, 2024 at 07:22:53PM -0600, Andreas Dannenberg via buildroot wrote: > > Hi Dario, > > > > On Fri, Mar 01, 2024 at 02:35:57PM +0100, Dario Binacchi wrote: > > > The SK-AM62B-P1 is the newest version of SK-AM62 which includes > > > high-security field-securable (HS-FS) silicon to optionally customize keys > > > and encryption for security applications. > > > This requires enabling the BR2_TARGET_TI_K3_IMAGE_GEN_SECTYPE_HS_FS option, > > > which, however, was buggy. This series fixes the errors and bumps the Linux > > > kernel and U-Boot required for such a new device. > > > > > > Furthermore, this version complete the series by updating the > > > ti_am64x_sk_defconfig too and remove ti-k3-image-gen, as requested by > > > Romain Naour: > > > https://patchwork.ozlabs.org/project/buildroot/patch/20240224205654.1546744-17-dario.binacchi@amarulasolutions.com/ > > > I have successfully executed compilation tests for all possible combinations of platform and security type: > > > am62x -> GP, HS, HS-FS > > > am64x -> GP, HS, HS-FS > > > > Thank you for the changes and the updated submission. I'll build and > > boot-test your v8 on all 4 hardware variants of the above platforms > > and report back before the end of this weekend. > > I just finished build and boot testing all 4 device/security > combinations without any issues: > > 1) AM62 GP > 2) AM62 HS-FS > 3) AM64 GP > 4) AM64 HS-FS > > For this I applied your v8 series on top of... > 75a3562324 ("support/scripts/pkg-stats: sort CVEs in HTML output") > ...and performed 4 individual completely clean builds. > > Then, I boot tested all 4 SD card images on the respective HW platforms > (4 different SK boards). The boot logs of each case look pretty clean > and about as expected and I've archived them here [1] if somebody is > curious. While the boot logs show there's further work needed (e.g., > updating TIFS/DM device firmwares to more current versions, enabling/ > fixing power off functionality) all what I saw should be done as future > work and not as part of this series. I think it does a great job making > those device families accessible and enabling said further development. > > So for the series: > > Tested-by: Andreas Dannenberg <dannenberg@ti.com> Nice! Thanks a lot for your tests! Regards, Dario > > [1] https://gist.github.com/adannenb-ti/35feca65e7d86a7e062a36c48efddc63 > > > > > > Also yesterday I was able to get graphics to work on AM62x with a few > > patches based on top of your v7 series, using the Imagination Rogue > > Power VR GPU driver and Mesa, and was able to run (accelerated) Weston. > > Will pobably submit an RFC of this next week. > > > > -- > > Andreas Dannenberg > > Texas Instruments Inc > > > > > > > > > > The AM62x HS-FS configuration has also been tested on the SK-AM62B-P1 board. > > > > > > Dario Binacchi (22): > > > configs/ti_am62x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > > > setting > > > configs/ti_am64x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > > > setting > > > configs/ti_am62x_sk_defconfig: explicitly set the ti-k3-r5-loader > > > version > > > configs/ti_am64x_sk_defconfig: explicitly set the ti-k3-r5-loader > > > version > > > boot/ti-k3-r5-loader: bump to version 2024.01 > > > package/python-attrs: add host variant > > > package/python-rpds-py: add host variant > > > package/python-referencing: add host variant > > > package/python-jsonschema-specifications: add host variant > > > package/python-jsonschema: add host variant > > > boot/ti-k3-r5-loader: set binman environment > > > boot/uboot: add BR2_TARGET_UBOOT_USE_BINMAN option > > > package/ti-k3: move TI_K3_{SECTYPE,SOC} out of the image-gen scope > > > package/ti-k3: disable HS-FS for AM65 SOC > > > boot/ti-k3/ti-k3-r5-loader: install tiboot3.bin > > > configs/ti_am62x_sk_defconfig: bump U-Boot version to 2024.01 > > > configs/ti_am62x_sk_defconfig: bump Linux version to 6.6.18 > > > board/ti/am62x-sk: generalize post-build.sh > > > board/ti/am62x-sk: move post-{build,image}.sh to board/ti/common/am6xx > > > package/ti-k3: fix BR2_PACKAGE_TI_K3_SOC setting for am64x SOC > > > configs/ti_am64x_sk_defconfig: bump U-Boot version to 2024.01 > > > configs/ti_am64x_sk_defconfig: bump Linux version to 6.6.18 > > > > > > Romain Naour (1): > > > boot/ti-k3-image-gen: remove package > > > > > > Config.in.legacy | 7 ++ > > > DEVELOPERS | 2 - > > > board/ti/am62x-sk/genimage.cfg | 7 +- > > > board/ti/am64x-sk/genimage.cfg | 7 +- > > > board/ti/common/am6xx/post-build.sh | 58 ++++++++++++++ > > > board/ti/common/am6xx/post-image.sh | 11 +++ > > > boot/Config.in | 1 - > > > boot/ti-k3-image-gen/Config.in | 77 ------------------- > > > boot/ti-k3-image-gen/ti-k3-image-gen.hash | 3 - > > > boot/ti-k3-image-gen/ti-k3-image-gen.mk | 54 ------------- > > > boot/ti-k3-r5-loader/Config.in | 5 +- > > > boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 +- > > > boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 12 ++- > > > boot/uboot/Config.in | 23 +++--- > > > boot/uboot/uboot.mk | 12 ++- > > > configs/ti_am62x_sk_defconfig | 22 +++--- > > > configs/ti_am64x_sk_defconfig | 22 +++--- > > > package/Config.in | 1 + > > > package/python-attrs/python-attrs.mk | 6 ++ > > > .../python-jsonschema-specifications.mk | 10 +++ > > > .../python-jsonschema/python-jsonschema.mk | 14 ++++ > > > .../python-referencing/python-referencing.mk | 11 +++ > > > package/python-rpds-py/python-rpds-py.mk | 1 + > > > package/ti-k3/Config.in | 61 +++++++++++++++ > > > package/ti-k3/ti-k3.mk | 7 ++ > > > 25 files changed, 263 insertions(+), 173 deletions(-) > > > create mode 100755 board/ti/common/am6xx/post-build.sh > > > create mode 100755 board/ti/common/am6xx/post-image.sh > > > delete mode 100644 boot/ti-k3-image-gen/Config.in > > > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.hash > > > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.mk > > > create mode 100644 package/ti-k3/Config.in > > > create mode 100644 package/ti-k3/ti-k3.mk > > > > > > -- > > > 2.43.0 > > > > > _______________________________________________ > > buildroot mailing list > > buildroot@buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Romain On Sat, Mar 2, 2024 at 8:11 AM Andreas Dannenberg <dannenberg@ti.com> wrote: > > Hi Dario, > > On Fri, Mar 01, 2024 at 07:22:53PM -0600, Andreas Dannenberg via buildroot wrote: > > Hi Dario, > > > > On Fri, Mar 01, 2024 at 02:35:57PM +0100, Dario Binacchi wrote: > > > The SK-AM62B-P1 is the newest version of SK-AM62 which includes > > > high-security field-securable (HS-FS) silicon to optionally customize keys > > > and encryption for security applications. > > > This requires enabling the BR2_TARGET_TI_K3_IMAGE_GEN_SECTYPE_HS_FS option, > > > which, however, was buggy. This series fixes the errors and bumps the Linux > > > kernel and U-Boot required for such a new device. > > > > > > Furthermore, this version complete the series by updating the > > > ti_am64x_sk_defconfig too and remove ti-k3-image-gen, as requested by > > > Romain Naour: > > > https://patchwork.ozlabs.org/project/buildroot/patch/20240224205654.1546744-17-dario.binacchi@amarulasolutions.com/ > > > I have successfully executed compilation tests for all possible combinations of platform and security type: > > > am62x -> GP, HS, HS-FS > > > am64x -> GP, HS, HS-FS > > > > Thank you for the changes and the updated submission. I'll build and > > boot-test your v8 on all 4 hardware variants of the above platforms > > and report back before the end of this weekend. > > I just finished build and boot testing all 4 device/security > combinations without any issues: > > 1) AM62 GP > 2) AM62 HS-FS > 3) AM64 GP > 4) AM64 HS-FS > > For this I applied your v8 series on top of... > 75a3562324 ("support/scripts/pkg-stats: sort CVEs in HTML output") > ...and performed 4 individual completely clean builds. > > Then, I boot tested all 4 SD card images on the respective HW platforms > (4 different SK boards). The boot logs of each case look pretty clean > and about as expected and I've archived them here [1] if somebody is > curious. While the boot logs show there's further work needed (e.g., > updating TIFS/DM device firmwares to more current versions, enabling/ > fixing power off functionality) all what I saw should be done as future > work and not as part of this series. I think it does a great job making > those device families accessible and enabling said further development. > > So for the series: > > Tested-by: Andreas Dannenberg <dannenberg@ti.com> > > [1] https://gist.github.com/adannenb-ti/35feca65e7d86a7e062a36c48efddc63 > > Can we merge it up? Tested on my AM62X industrial product Tested-by: Michael Trimarchi <michael@amarulasolutions.com> > > > > Also yesterday I was able to get graphics to work on AM62x with a few > > patches based on top of your v7 series, using the Imagination Rogue > > Power VR GPU driver and Mesa, and was able to run (accelerated) Weston. > > Will pobably submit an RFC of this next week. > > > > -- > > Andreas Dannenberg > > Texas Instruments Inc > > > > > > > > > > The AM62x HS-FS configuration has also been tested on the SK-AM62B-P1 board. > > > > > > Dario Binacchi (22): > > > configs/ti_am62x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > > > setting > > > configs/ti_am64x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM > > > setting > > > configs/ti_am62x_sk_defconfig: explicitly set the ti-k3-r5-loader > > > version > > > configs/ti_am64x_sk_defconfig: explicitly set the ti-k3-r5-loader > > > version > > > boot/ti-k3-r5-loader: bump to version 2024.01 > > > package/python-attrs: add host variant > > > package/python-rpds-py: add host variant > > > package/python-referencing: add host variant > > > package/python-jsonschema-specifications: add host variant > > > package/python-jsonschema: add host variant > > > boot/ti-k3-r5-loader: set binman environment > > > boot/uboot: add BR2_TARGET_UBOOT_USE_BINMAN option > > > package/ti-k3: move TI_K3_{SECTYPE,SOC} out of the image-gen scope > > > package/ti-k3: disable HS-FS for AM65 SOC > > > boot/ti-k3/ti-k3-r5-loader: install tiboot3.bin > > > configs/ti_am62x_sk_defconfig: bump U-Boot version to 2024.01 > > > configs/ti_am62x_sk_defconfig: bump Linux version to 6.6.18 > > > board/ti/am62x-sk: generalize post-build.sh > > > board/ti/am62x-sk: move post-{build,image}.sh to board/ti/common/am6xx > > > package/ti-k3: fix BR2_PACKAGE_TI_K3_SOC setting for am64x SOC > > > configs/ti_am64x_sk_defconfig: bump U-Boot version to 2024.01 > > > configs/ti_am64x_sk_defconfig: bump Linux version to 6.6.18 > > > > > > Romain Naour (1): > > > boot/ti-k3-image-gen: remove package > > > > > > Config.in.legacy | 7 ++ > > > DEVELOPERS | 2 - > > > board/ti/am62x-sk/genimage.cfg | 7 +- > > > board/ti/am64x-sk/genimage.cfg | 7 +- > > > board/ti/common/am6xx/post-build.sh | 58 ++++++++++++++ > > > board/ti/common/am6xx/post-image.sh | 11 +++ > > > boot/Config.in | 1 - > > > boot/ti-k3-image-gen/Config.in | 77 ------------------- > > > boot/ti-k3-image-gen/ti-k3-image-gen.hash | 3 - > > > boot/ti-k3-image-gen/ti-k3-image-gen.mk | 54 ------------- > > > boot/ti-k3-r5-loader/Config.in | 5 +- > > > boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 +- > > > boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 12 ++- > > > boot/uboot/Config.in | 23 +++--- > > > boot/uboot/uboot.mk | 12 ++- > > > configs/ti_am62x_sk_defconfig | 22 +++--- > > > configs/ti_am64x_sk_defconfig | 22 +++--- > > > package/Config.in | 1 + > > > package/python-attrs/python-attrs.mk | 6 ++ > > > .../python-jsonschema-specifications.mk | 10 +++ > > > .../python-jsonschema/python-jsonschema.mk | 14 ++++ > > > .../python-referencing/python-referencing.mk | 11 +++ > > > package/python-rpds-py/python-rpds-py.mk | 1 + > > > package/ti-k3/Config.in | 61 +++++++++++++++ > > > package/ti-k3/ti-k3.mk | 7 ++ > > > 25 files changed, 263 insertions(+), 173 deletions(-) > > > create mode 100755 board/ti/common/am6xx/post-build.sh > > > create mode 100755 board/ti/common/am6xx/post-image.sh > > > delete mode 100644 boot/ti-k3-image-gen/Config.in > > > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.hash > > > delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.mk > > > create mode 100644 package/ti-k3/Config.in > > > create mode 100644 package/ti-k3/ti-k3.mk > > > > > > -- > > > 2.43.0 > > > > > _______________________________________________ > > buildroot mailing list > > buildroot@buildroot.org > > https://lists.buildroot.org/mailman/listinfo/buildroot
The SK-AM62B-P1 is the newest version of SK-AM62 which includes high-security field-securable (HS-FS) silicon to optionally customize keys and encryption for security applications. This requires enabling the BR2_TARGET_TI_K3_IMAGE_GEN_SECTYPE_HS_FS option, which, however, was buggy. This series fixes the errors and bumps the Linux kernel and U-Boot required for such a new device. Furthermore, this version complete the series by updating the ti_am64x_sk_defconfig too and remove ti-k3-image-gen, as requested by Romain Naour: https://patchwork.ozlabs.org/project/buildroot/patch/20240224205654.1546744-17-dario.binacchi@amarulasolutions.com/ I have successfully executed compilation tests for all possible combinations of platform and security type: am62x -> GP, HS, HS-FS am64x -> GP, HS, HS-FS The AM62x HS-FS configuration has also been tested on the SK-AM62B-P1 board. Dario Binacchi (22): configs/ti_am62x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM setting configs/ti_am64x_sk_defconfig: fix BR2_TARGET_OPTEE_OS_PLATFORM setting configs/ti_am62x_sk_defconfig: explicitly set the ti-k3-r5-loader version configs/ti_am64x_sk_defconfig: explicitly set the ti-k3-r5-loader version boot/ti-k3-r5-loader: bump to version 2024.01 package/python-attrs: add host variant package/python-rpds-py: add host variant package/python-referencing: add host variant package/python-jsonschema-specifications: add host variant package/python-jsonschema: add host variant boot/ti-k3-r5-loader: set binman environment boot/uboot: add BR2_TARGET_UBOOT_USE_BINMAN option package/ti-k3: move TI_K3_{SECTYPE,SOC} out of the image-gen scope package/ti-k3: disable HS-FS for AM65 SOC boot/ti-k3/ti-k3-r5-loader: install tiboot3.bin configs/ti_am62x_sk_defconfig: bump U-Boot version to 2024.01 configs/ti_am62x_sk_defconfig: bump Linux version to 6.6.18 board/ti/am62x-sk: generalize post-build.sh board/ti/am62x-sk: move post-{build,image}.sh to board/ti/common/am6xx package/ti-k3: fix BR2_PACKAGE_TI_K3_SOC setting for am64x SOC configs/ti_am64x_sk_defconfig: bump U-Boot version to 2024.01 configs/ti_am64x_sk_defconfig: bump Linux version to 6.6.18 Romain Naour (1): boot/ti-k3-image-gen: remove package Config.in.legacy | 7 ++ DEVELOPERS | 2 - board/ti/am62x-sk/genimage.cfg | 7 +- board/ti/am64x-sk/genimage.cfg | 7 +- board/ti/common/am6xx/post-build.sh | 58 ++++++++++++++ board/ti/common/am6xx/post-image.sh | 11 +++ boot/Config.in | 1 - boot/ti-k3-image-gen/Config.in | 77 ------------------- boot/ti-k3-image-gen/ti-k3-image-gen.hash | 3 - boot/ti-k3-image-gen/ti-k3-image-gen.mk | 54 ------------- boot/ti-k3-r5-loader/Config.in | 5 +- boot/ti-k3-r5-loader/ti-k3-r5-loader.hash | 2 +- boot/ti-k3-r5-loader/ti-k3-r5-loader.mk | 12 ++- boot/uboot/Config.in | 23 +++--- boot/uboot/uboot.mk | 12 ++- configs/ti_am62x_sk_defconfig | 22 +++--- configs/ti_am64x_sk_defconfig | 22 +++--- package/Config.in | 1 + package/python-attrs/python-attrs.mk | 6 ++ .../python-jsonschema-specifications.mk | 10 +++ .../python-jsonschema/python-jsonschema.mk | 14 ++++ .../python-referencing/python-referencing.mk | 11 +++ package/python-rpds-py/python-rpds-py.mk | 1 + package/ti-k3/Config.in | 61 +++++++++++++++ package/ti-k3/ti-k3.mk | 7 ++ 25 files changed, 263 insertions(+), 173 deletions(-) create mode 100755 board/ti/common/am6xx/post-build.sh create mode 100755 board/ti/common/am6xx/post-image.sh delete mode 100644 boot/ti-k3-image-gen/Config.in delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.hash delete mode 100644 boot/ti-k3-image-gen/ti-k3-image-gen.mk create mode 100644 package/ti-k3/Config.in create mode 100644 package/ti-k3/ti-k3.mk