[v4,1/6] Input: imx6ul_tsc - fix typo in register name
diff mbox series

Message ID 20250917080534.1772202-2-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • Input: imx6ul_tsc - set glitch threshold by dts property
Related show

Commit Message

Dario Binacchi Sept. 17, 2025, 8:05 a.m. UTC 
From: Michael Trimarchi <michael@amarulasolutions.com>

Replace 'SETING' with 'SETTING'.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>

---

(no changes since v2)

Changes in v2:
- Add Reviewed-by tag of Frank Li.

 drivers/input/touchscreen/imx6ul_tsc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Dmitry Torokhov Sept. 18, 2025, 5:39 a.m. UTC | #1 
On Wed, Sep 17, 2025 at 10:05:06AM +0200, Dario Binacchi wrote:
> From: Michael Trimarchi <michael@amarulasolutions.com>
> 
> Replace 'SETING' with 'SETTING'.
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> 

Applied, thank you.

Patch
diff mbox series 

diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c
index 6ac8fa84ed9f..c2c6e50efc54 100644
--- a/drivers/input/touchscreen/imx6ul_tsc.c
+++ b/drivers/input/touchscreen/imx6ul_tsc.c
@@ -55,7 +55,7 @@ 
 #define ADC_TIMEOUT		msecs_to_jiffies(100)
 
 /* TSC registers */
-#define REG_TSC_BASIC_SETING	0x00
+#define REG_TSC_BASIC_SETTING	0x00
 #define REG_TSC_PRE_CHARGE_TIME	0x10
 #define REG_TSC_FLOW_CONTROL	0x20
 #define REG_TSC_MEASURE_VALUE	0x30
@@ -192,7 +192,7 @@  static void imx6ul_tsc_set(struct imx6ul_tsc *tsc)
 
 	basic_setting |= tsc->measure_delay_time << 8;
 	basic_setting |= DETECT_4_WIRE_MODE | AUTO_MEASURE;
-	writel(basic_setting, tsc->tsc_regs + REG_TSC_BASIC_SETING);
+	writel(basic_setting, tsc->tsc_regs + REG_TSC_BASIC_SETTING);
 
 	writel(DE_GLITCH_2, tsc->tsc_regs + REG_TSC_DEBUG_MODE2);