[RESEND,v4,00/10] Support Engicam MicroGEA boards
mbox series

Message ID 20250620082736.3582691-1-dario.binacchi@amarulasolutions.com
Headers show
Series
  • Support Engicam MicroGEA boards
Related show

Message

Dario Binacchi June 20, 2025, 8:27 a.m. UTC 
The series adds support for Engicam MicroGEA boards:

- BMM
- RMM
- GTW

based on MicroGEA-MX6UL SoM.

Changes in v4:
- Fix commit title. It was referring to a wrong configuration

Changes in v3:
- Drop an extra blank line from the iomuxc node.
- Rename sgtl5000 node to audio-codec.
- Move the reg property of the audio-codec node right
  after the compatible property.
- Drop an extra blank line from iomuxc and iomuxc_snvs nodes.
- Rename sgtl5000 node to audio-codec.
- Move the reg property of the audio-codec node right
  after the compatible property.
- Drop an extra blank line from iomuxc and iomuxc_snvs nodes.
- Drop an extra blank line from the iomuxc node.

Changes in v2:
- Change local-mac-address to 00 00 00 00 00 00. The actual value will
  be set by the bootloader. The previous one was assigned to Freescale
  Semiconductor.
- Move iomuxc and iomuxc_snvs nodes to the end of the DTS file.
- Move iomuxc and iomuxc_snvs nodes to the end of the DTS file.
- Drop an extra blank line
- Move iomuxc and iomuxc_snvs nodes to the end of the DTS file.

Dario Binacchi (10):
  dt-bindings: arm: fsl: support Engicam MicroGEA BMM board
  ARM: dts: imx6ul: support Engicam MicroGEA-MX6UL SoM
  ARM: dts: imx6ul: support Engicam MicroGEA BMM board
  ARM: imx_v6_v7_defconfig: cleanup with savedefconfig
  ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
  dt-bindings: arm: fsl: support Engicam MicroGEA RMM board
  ARM: dts: imx6ul: support Engicam MicroGEA RMM board
  dt-bindings: arm: fsl: support Engicam MicroGEA GTW board
  ARM: dts: imx6ul: support Engicam MicroGEA GTW board
  ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503

 .../devicetree/bindings/arm/fsl.yaml          |   9 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   3 +
 .../nxp/imx/imx6ull-engicam-microgea-bmm.dts  | 303 +++++++++++++++
 .../nxp/imx/imx6ull-engicam-microgea-gtw.dts  | 162 ++++++++
 .../nxp/imx/imx6ull-engicam-microgea-rmm.dts  | 360 ++++++++++++++++++
 .../dts/nxp/imx/imx6ull-engicam-microgea.dtsi |  95 +++++
 arch/arm/configs/imx_v6_v7_defconfig          |  27 +-
 7 files changed, 938 insertions(+), 21 deletions(-)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi

Comments

Shawn Guo July 2, 2025, 10:02 a.m. UTC | #1 
On Fri, Jun 20, 2025 at 10:27:04AM +0200, Dario Binacchi wrote:
> Dario Binacchi (10):
>   dt-bindings: arm: fsl: support Engicam MicroGEA BMM board
>   ARM: dts: imx6ul: support Engicam MicroGEA-MX6UL SoM
>   ARM: dts: imx6ul: support Engicam MicroGEA BMM board
>   ARM: imx_v6_v7_defconfig: cleanup with savedefconfig
>   ARM: imx_v6_v7_defconfig: select CONFIG_INPUT_PWM_BEEPER
>   dt-bindings: arm: fsl: support Engicam MicroGEA RMM board
>   ARM: dts: imx6ul: support Engicam MicroGEA RMM board
>   dt-bindings: arm: fsl: support Engicam MicroGEA GTW board
>   ARM: dts: imx6ul: support Engicam MicroGEA GTW board
>   ARM: imx_v6_v7_defconfig: select CONFIG_USB_HSIC_USB3503

Applied all, thanks!

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.