@@ -108,27 +108,27 @@ static const char * const imx8mn_disp_pixel_sels[] = {"osc_24m", "video_pll1_out
"sys_pll3_out", "clk_ext4", };
static const char * const imx8mn_sai2_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_sai3_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_sai5_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext2", "clk_ext3", };
static const char * const imx8mn_sai6_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_sai7_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext3", "clk_ext4", };
static const char * const imx8mn_spdif1_sels[] = {"osc_24m", "audio_pll1_out", "audio_pll2_out",
- "video_pll1_out", "sys_pll1_133m", "osc_hdmi",
+ "video_pll1_out", "sys_pll1_133m", "dummy",
"clk_ext2", "clk_ext3", };
static const char * const imx8mn_enet_ref_sels[] = {"osc_24m", "sys_pll2_125m", "sys_pll2_50m",
There is no occurrence of the hdmi oscillator in the reference manual (document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes 76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is no entry for the source select bits 101b, which is the setting referenced by "osc_hdmi". Fix by renaming "osc_hdmi" with "dummy", a clock which has already been used for missing source select bits. Tested on the BSH SystemMaster (SMM) S2 board. Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- drivers/clk/imx/clk-imx8mn.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)