[RESEND] ARM: dts: stm32f469-disco: use the same 3v3 for SD and DSI nodes
diff mbox series

Message ID 20231108134426.4174699-1-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • [RESEND] ARM: dts: stm32f469-disco: use the same 3v3 for SD and DSI nodes
Related show

Commit Message

Dario Binacchi Nov. 8, 2023, 1:44 p.m. UTC 
In the board schematic, the power supply for the SD card is the same 3.3
volts used to power the LCD panel and other peripherals. By generalizing
the name of the voltage regulator, it simplifies the device tree and makes
it more readable.

Link: https://www.st.com/en/evaluation-tools/32f469idiscovery.html#cad-resources
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

 arch/arm/boot/dts/st/stm32f469-disco.dts | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

Patch
diff mbox series 

diff --git a/arch/arm/boot/dts/st/stm32f469-disco.dts b/arch/arm/boot/dts/st/stm32f469-disco.dts
index cbbd521bf010..8a4f8ddd083d 100644
--- a/arch/arm/boot/dts/st/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f469-disco.dts
@@ -69,16 +69,9 @@  aliases {
 		serial0 = &usart3;
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vdd_dsi: vdd-dsi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_dsi";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -164,7 +157,7 @@  panel@0 {
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_dsi>;
+		power-supply = <&vcc_3v3>;
 		status = "okay";
 
 		port {
@@ -219,7 +212,7 @@  timer@2 {
 
 &sdio {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain";