[v3,1/1] configs/imx6ulz_bsh_smm_m2_defconfig: new defconfig

3059 diff mbox series

From: Michael Trimarchi <michael@amarulasolutions.com>

BSH SMM M2 (SystemMaster M2) Board is an add-on board which provides
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.

Board support package includes the following components:
- mainline Linux kernel 6.1.68
- mainline U-Boot 2023.10

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

---

Changes in v3:
- Drop BR2_TOOLCHAIN_BUILDROOT_CXX and BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
  from imx6ulz_bsh_smm_m2_defconfig.
- Drop useless configurations from board/bsh/imx6ulz-bsh-smm-m2/linux.config.

Changes in v2:
- Bump Linux to 6.1.68.
- Bump U-Boot to 2023.10.
- Fix path of linux configuration.
- Rename defconfig to linux.config.
- Drop configurations not necessary, in order to keep the board
  configuration very minimal, as suggested by the review of
  Giulio Benetti.
- Update commit message
- Dromp IMX8M commands from nand-full.lst.

 DEVELOPERS                                 |   2 +
 board/bsh/imx6ulz-bsh-smm-m2/flash.sh      |  25 ++
 board/bsh/imx6ulz-bsh-smm-m2/linux.config  | 303 +++++++++++++++++++++
 board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst |  40 +++
 board/bsh/imx6ulz-bsh-smm-m2/post-build.sh |   4 +
 board/bsh/imx6ulz-bsh-smm-m2/readme.txt    |  67 +++++
 configs/imx6ulz_bsh_smm_m2_defconfig       |  40 +++
 7 files changed, 481 insertions(+)
 create mode 100755 board/bsh/imx6ulz-bsh-smm-m2/flash.sh
 create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/linux.config
 create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst
 create mode 100755 board/bsh/imx6ulz-bsh-smm-m2/post-build.sh
 create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/readme.txt
 create mode 100644 configs/imx6ulz_bsh_smm_m2_defconfig

Hi all

On Mon, Mar 4, 2024 at 6:32 PM Dario Binacchi
<dario.binacchi@amarulasolutions.com> wrote:
>
> From: Michael Trimarchi <michael@amarulasolutions.com>
>
> BSH SMM M2 (SystemMaster M2) Board is an add-on board which provides
> input and output interfaces to a dedicated carrier board. It is designed
> mainly to provide graphical/video and connectivity interfaces to the
> appliance.
>

Any possibility to get this included?

Michael

> Board support package includes the following components:
> - mainline Linux kernel 6.1.68
> - mainline U-Boot 2023.10
>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
>
> ---
>
> Changes in v3:
> - Drop BR2_TOOLCHAIN_BUILDROOT_CXX and BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
>   from imx6ulz_bsh_smm_m2_defconfig.
> - Drop useless configurations from board/bsh/imx6ulz-bsh-smm-m2/linux.config.
>
> Changes in v2:
> - Bump Linux to 6.1.68.
> - Bump U-Boot to 2023.10.
> - Fix path of linux configuration.
> - Rename defconfig to linux.config.
> - Drop configurations not necessary, in order to keep the board
>   configuration very minimal, as suggested by the review of
>   Giulio Benetti.
> - Update commit message
> - Dromp IMX8M commands from nand-full.lst.
>
>  DEVELOPERS                                 |   2 +
>  board/bsh/imx6ulz-bsh-smm-m2/flash.sh      |  25 ++
>  board/bsh/imx6ulz-bsh-smm-m2/linux.config  | 303 +++++++++++++++++++++
>  board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst |  40 +++
>  board/bsh/imx6ulz-bsh-smm-m2/post-build.sh |   4 +
>  board/bsh/imx6ulz-bsh-smm-m2/readme.txt    |  67 +++++
>  configs/imx6ulz_bsh_smm_m2_defconfig       |  40 +++
>  7 files changed, 481 insertions(+)
>  create mode 100755 board/bsh/imx6ulz-bsh-smm-m2/flash.sh
>  create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/linux.config
>  create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst
>  create mode 100755 board/bsh/imx6ulz-bsh-smm-m2/post-build.sh
>  create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/readme.txt
>  create mode 100644 configs/imx6ulz_bsh_smm_m2_defconfig
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 0bfe91f064a9..3a71eaf83e0e 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -754,6 +754,7 @@ F:  package/xinetd/
>  N:     Dario Binacchi <dario.binacchi@amarulasolutions.com>
>  F:     board/bsh/
>  F:     board/stmicroelectronics/stm32f769-disco/
> +F:     configs/imx6ulz_bsh_smm_m2_defconfig
>  F:     configs/imx8mn_bsh_smm_s2_defconfig
>  F:     configs/imx8mn_bsh_smm_s2_pro_defconfig
>  F:     configs/stm32f769_disco_sd_defconfig
> @@ -2226,6 +2227,7 @@ F:        package/spdlog/
>
>  N:     Michael Trimarchi <michael@amarulasolutions.com>
>  F:     board/bsh/
> +F:     configs/imx6ulz_bsh_smm_m2_defconfig
>  F:     configs/imx8mn_bsh_smm_s2_defconfig
>  F:     configs/imx8mn_bsh_smm_s2_pro_defconfig
>  F:     package/python-spidev/
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/flash.sh b/board/bsh/imx6ulz-bsh-smm-m2/flash.sh
> new file mode 100755
> index 000000000000..e3b7beef88eb
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/flash.sh
> @@ -0,0 +1,25 @@
> +#!/bin/bash
> +
> +if [ $# -eq 0 ]; then
> +    OUTPUT_DIR=output
> +else
> +    OUTPUT_DIR=$1
> +fi
> +
> +if ! test -d "${OUTPUT_DIR}" ; then
> +    echo "ERROR: no output directory specified."
> +    echo "Usage: $0 OUTPUT_DIR"
> +    echo ""
> +    echo "Arguments:"
> +    echo "    OUTPUT_DIR    The Buildroot output directory."
> +    exit 1
> +fi
> +
> +IMAGES_DIR="${OUTPUT_DIR}/images"
> +
> +uuu -v -b "${IMAGES_DIR}/nand-full.lst" \
> +  "${IMAGES_DIR}/u-boot-with-spl.imx" \
> +  "${IMAGES_DIR}/u-boot-with-spl.imx" \
> +  "${IMAGES_DIR}/rootfs.ubifs" \
> +  "${IMAGES_DIR}/zImage" \
> +  "${IMAGES_DIR}/imx6ulz-bsh-smm-m2.dtb"
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/linux.config b/board/bsh/imx6ulz-bsh-smm-m2/linux.config
> new file mode 100644
> index 000000000000..7da8d4abe91b
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/linux.config
> @@ -0,0 +1,303 @@
> +CONFIG_SYSVIPC=y
> +CONFIG_NO_HZ_IDLE=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_PREEMPT_VOLUNTARY=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=18
> +CONFIG_CGROUPS=y
> +CONFIG_CGROUP_FREEZER=y
> +CONFIG_RELAY=y
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_EXPERT=y
> +CONFIG_ARCH_MULTI_V6=y
> +CONFIG_ARCH_MXC=y
> +CONFIG_SOC_IMX6Q=y
> +CONFIG_SOC_IMX6SL=y
> +CONFIG_SOC_IMX6SLL=y
> +CONFIG_SOC_IMX6SX=y
> +CONFIG_SOC_IMX6UL=y
> +CONFIG_SMP=y
> +CONFIG_HAVE_ARM_ARCH_TIMER=y
> +CONFIG_ARM_PSCI=y
> +CONFIG_HIGHMEM=y
> +CONFIG_ARCH_FORCE_MAX_ORDER=14
> +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
> +CONFIG_CPU_FREQ=y
> +CONFIG_CPU_FREQ_STAT=y
> +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> +CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> +CONFIG_CPU_FREQ_GOV_USERSPACE=y
> +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
> +CONFIG_CPUFREQ_DT=y
> +CONFIG_ARM_IMX6Q_CPUFREQ=y
> +CONFIG_ARM_IMX_CPUFREQ_DT=y
> +CONFIG_CPU_IDLE=y
> +CONFIG_ARM_CPUIDLE=y
> +CONFIG_ARM_PSCI_CPUIDLE=y
> +CONFIG_VFP=y
> +CONFIG_NEON=y
> +CONFIG_PM_DEBUG=y
> +CONFIG_PM_TEST_SUSPEND=y
> +CONFIG_KPROBES=y
> +# CONFIG_GCC_PLUGINS is not set
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_MODVERSIONS=y
> +CONFIG_MODULE_SRCVERSION_ALL=y
> +CONFIG_BINFMT_MISC=m
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_CMA=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IPV6_SIT=m
> +CONFIG_NETFILTER=y
> +CONFIG_IP_NF_IPTABLES=y
> +CONFIG_IP_NF_FILTER=y
> +CONFIG_VLAN_8021Q=y
> +CONFIG_LLC2=y
> +CONFIG_DNS_RESOLVER=y
> +CONFIG_NET_PKTGEN=m
> +CONFIG_BT=y
> +CONFIG_BT_RFCOMM=y
> +CONFIG_BT_RFCOMM_TTY=y
> +CONFIG_BT_BNEP=y
> +CONFIG_BT_BNEP_MC_FILTER=y
> +CONFIG_BT_BNEP_PROTO_FILTER=y
> +CONFIG_BT_HIDP=y
> +CONFIG_BT_HCIUART=m
> +CONFIG_BT_HCIUART_BCSP=y
> +CONFIG_BT_HCIUART_ATH3K=y
> +CONFIG_BT_HCIUART_LL=y
> +CONFIG_BT_HCIUART_3WIRE=y
> +CONFIG_BT_HCIUART_BCM=y
> +CONFIG_BT_HCIVHCI=y
> +CONFIG_CFG80211=y
> +CONFIG_NL80211_TESTMODE=y
> +CONFIG_MAC80211=y
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +# CONFIG_STANDALONE is not set
> +CONFIG_FW_LOADER_USER_HELPER=y
> +CONFIG_BRCMSTB_GISB_ARB=y
> +CONFIG_IMX_WEIM=y
> +CONFIG_VEXPRESS_CONFIG=y
> +CONFIG_CONNECTOR=y
> +CONFIG_MTD=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_CFI=y
> +CONFIG_MTD_JEDECPROBE=y
> +CONFIG_MTD_CFI_INTELEXT=y
> +CONFIG_MTD_CFI_AMDSTD=y
> +CONFIG_MTD_CFI_STAA=y
> +CONFIG_MTD_PHYSMAP=y
> +CONFIG_MTD_PHYSMAP_OF=y
> +CONFIG_MTD_DATAFLASH=y
> +CONFIG_MTD_SST25L=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_MTD_NAND_GPMI_NAND=y
> +CONFIG_MTD_NAND_MXC=y
> +CONFIG_MTD_SPI_NOR=y
> +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_FASTMAP=y
> +CONFIG_MTD_UBI_BLOCK=y
> +CONFIG_BLK_DEV_LOOP=y
> +CONFIG_BLK_DEV_RAM=y
> +CONFIG_BLK_DEV_RAM_SIZE=65536
> +CONFIG_EEPROM_AT25=y
> +CONFIG_NETDEVICES=y
> +# CONFIG_ETHERNET is not set
> +# CONFIG_USB_NET_DRIVERS is not set
> +CONFIG_BRCMFMAC=m
> +CONFIG_HOSTAP=y
> +CONFIG_INPUT_MISC=y
> +CONFIG_SERIO_SERPORT=m
> +CONFIG_VT_HW_CONSOLE_BINDING=y
> +# CONFIG_LEGACY_PTYS is not set
> +CONFIG_SERIAL_IMX=y
> +CONFIG_SERIAL_IMX_CONSOLE=y
> +CONFIG_SERIAL_FSL_LPUART=y
> +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
> +CONFIG_SERIAL_DEV_BUS=y
> +CONFIG_SPI=y
> +CONFIG_SPI_FSL_QUADSPI=y
> +CONFIG_SPI_GPIO=y
> +CONFIG_SPI_IMX=y
> +CONFIG_SPI_SPIDEV=y
> +CONFIG_PTP_1588_CLOCK=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_MXC=y
> +CONFIG_POWER_RESET=y
> +CONFIG_POWER_RESET_SYSCON=y
> +CONFIG_POWER_RESET_SYSCON_POWEROFF=y
> +CONFIG_SENSORS_GPIO_FAN=y
> +CONFIG_THERMAL=y
> +CONFIG_THERMAL_STATISTICS=y
> +CONFIG_THERMAL_WRITABLE_TRIPS=y
> +CONFIG_CPU_THERMAL=y
> +CONFIG_IMX_THERMAL=y
> +CONFIG_IMX8MM_THERMAL=y
> +CONFIG_WATCHDOG=y
> +CONFIG_IMX2_WDT=y
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> +CONFIG_REGULATOR_ANATOP=y
> +CONFIG_REGULATOR_GPIO=y
> +CONFIG_MEDIA_CEC_SUPPORT=y
> +CONFIG_IMX_IPUV3_CORE=y
> +CONFIG_USB=y
> +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_HCD_TEST_MODE=y
> +CONFIG_USB_ACM=m
> +CONFIG_USB_CHIPIDEA=y
> +CONFIG_USB_CHIPIDEA_UDC=y
> +CONFIG_USB_CHIPIDEA_HOST=y
> +CONFIG_USB_EHSET_TEST_FIXTURE=y
> +CONFIG_NOP_USB_XCEIV=y
> +CONFIG_USB_MXS_PHY=y
> +CONFIG_USB_ULPI=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_SNP_UDC_PLAT=y
> +CONFIG_USB_BDC_UDC=y
> +CONFIG_USB_CONFIGFS=y
> +CONFIG_USB_CONFIGFS_SERIAL=y
> +CONFIG_USB_CONFIGFS_ACM=y
> +CONFIG_USB_CONFIGFS_OBEX=y
> +CONFIG_USB_CONFIGFS_NCM=y
> +CONFIG_USB_CONFIGFS_ECM=y
> +CONFIG_USB_CONFIGFS_ECM_SUBSET=y
> +CONFIG_USB_CONFIGFS_RNDIS=y
> +CONFIG_USB_CONFIGFS_EEM=y
> +CONFIG_USB_CONFIGFS_MASS_STORAGE=y
> +CONFIG_USB_CONFIGFS_F_LB_SS=y
> +CONFIG_USB_CONFIGFS_F_FS=y
> +CONFIG_USB_CONFIGFS_F_HID=y
> +CONFIG_USB_CONFIGFS_F_PRINTER=y
> +CONFIG_USB_ZERO=m
> +CONFIG_USB_ETH=m
> +CONFIG_USB_G_NCM=m
> +CONFIG_USB_GADGETFS=m
> +CONFIG_USB_FUNCTIONFS=m
> +CONFIG_USB_MASS_STORAGE=m
> +CONFIG_USB_G_SERIAL=m
> +CONFIG_TYPEC=y
> +CONFIG_TYPEC_TCPM=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_SDHCI_ESDHC_IMX=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_INTF_DEV_UIE_EMUL=y
> +CONFIG_RTC_DRV_MXC=y
> +CONFIG_RTC_DRV_MXC_V2=y
> +CONFIG_RTC_DRV_SNVS=y
> +CONFIG_DMADEVICES=y
> +CONFIG_FSL_EDMA=y
> +CONFIG_FSL_QDMA=m
> +CONFIG_IMX_SDMA=m
> +CONFIG_MXS_DMA=y
> +CONFIG_DMATEST=y
> +CONFIG_DMABUF_HEAPS=y
> +CONFIG_DMABUF_HEAPS_SYSTEM=y
> +CONFIG_DMABUF_HEAPS_CMA=y
> +# CONFIG_VIRTIO_MENU is not set
> +# CONFIG_VHOST_MENU is not set
> +CONFIG_COMMON_CLK_PWM=y
> +CONFIG_CLK_IMX8MN=y
> +CONFIG_SOC_BRCMSTB=y
> +CONFIG_IMX_GPCV2_PM_DOMAINS=y
> +CONFIG_SOC_IMX8M=y
> +CONFIG_SOC_TI=y
> +CONFIG_MEMORY=y
> +CONFIG_PWM=y
> +CONFIG_PWM_FSL_FTM=m
> +CONFIG_PWM_IMX27=y
> +CONFIG_PWM_IMX_TPM=y
> +CONFIG_PHY_CADENCE_SALVO=y
> +CONFIG_FSL_IMX8_DDR_PMU=y
> +CONFIG_NVMEM_IMX_OCOTP=y
> +CONFIG_NVMEM_SNVS_LPGPR=y
> +CONFIG_EXT2_FS=y
> +CONFIG_EXT2_FS_XATTR=y
> +CONFIG_EXT2_FS_POSIX_ACL=y
> +CONFIG_EXT2_FS_SECURITY=y
> +CONFIG_EXT3_FS=y
> +CONFIG_EXT3_FS_POSIX_ACL=y
> +CONFIG_EXT3_FS_SECURITY=y
> +CONFIG_AUTOFS_FS=y
> +CONFIG_ISO9660_FS=m
> +CONFIG_JOLIET=y
> +CONFIG_ZISOFS=y
> +CONFIG_UDF_FS=m
> +CONFIG_MSDOS_FS=m
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_TMPFS_XATTR=y
> +CONFIG_UBIFS_FS=y
> +# CONFIG_NETWORK_FILESYSTEMS is not set
> +CONFIG_NLS_DEFAULT="cp437"
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ASCII=y
> +CONFIG_NLS_ISO8859_1=y
> +CONFIG_NLS_ISO8859_15=m
> +CONFIG_NLS_UTF8=y
> +CONFIG_SECURITYFS=y
> +CONFIG_CRYPTO_USER=y
> +CONFIG_CRYPTO_TEST=m
> +CONFIG_CRYPTO_DH=m
> +CONFIG_CRYPTO_ANUBIS=m
> +CONFIG_CRYPTO_BLOWFISH=m
> +CONFIG_CRYPTO_CAMELLIA=m
> +CONFIG_CRYPTO_CAST5=m
> +CONFIG_CRYPTO_CAST6=m
> +CONFIG_CRYPTO_DES=m
> +CONFIG_CRYPTO_FCRYPT=m
> +CONFIG_CRYPTO_KHAZAD=m
> +CONFIG_CRYPTO_SEED=m
> +CONFIG_CRYPTO_SERPENT=m
> +CONFIG_CRYPTO_TEA=m
> +CONFIG_CRYPTO_TWOFISH=m
> +CONFIG_CRYPTO_ARC4=m
> +CONFIG_CRYPTO_CFB=m
> +CONFIG_CRYPTO_CTS=m
> +CONFIG_CRYPTO_LRW=m
> +CONFIG_CRYPTO_OFB=m
> +CONFIG_CRYPTO_PCBC=m
> +CONFIG_CRYPTO_CHACHA20POLY1305=m
> +CONFIG_CRYPTO_MD4=m
> +CONFIG_CRYPTO_RMD160=m
> +CONFIG_CRYPTO_SHA1=y
> +CONFIG_CRYPTO_STREEBOG=m
> +CONFIG_CRYPTO_VMAC=m
> +CONFIG_CRYPTO_WP512=m
> +CONFIG_CRYPTO_XCBC=m
> +CONFIG_CRYPTO_USER_API_HASH=m
> +CONFIG_CRYPTO_USER_API_SKCIPHER=m
> +CONFIG_CRYPTO_USER_API_AEAD=m
> +CONFIG_CRYPTO_DEV_FSL_CAAM=y
> +CONFIG_CRYPTO_DEV_SAHARA=y
> +CONFIG_CRYPTO_DEV_MXS_DCP=y
> +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
> +CONFIG_CRC_T10DIF=y
> +CONFIG_CRC7=m
> +CONFIG_LIBCRC32C=m
> +CONFIG_DMA_CMA=y
> +CONFIG_CMA_SIZE_MBYTES=64
> +CONFIG_IRQ_POLL=y
> +CONFIG_PRINTK_TIME=y
> +# CONFIG_DEBUG_BUGVERBOSE is not set
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_DEBUG_FS=y
> +# CONFIG_SLUB_DEBUG is not set
> +# CONFIG_SCHED_DEBUG is not set
> +CONFIG_PROVE_LOCKING=y
> +# CONFIG_FTRACE is not set
> +CONFIG_CORESIGHT=y
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst b/board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst
> new file mode 100644
> index 000000000000..7c5a884d65c8
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst
> @@ -0,0 +1,40 @@
> +# @_flash.bin            | bootloader
> +# @_image   [_flash.bin] | image burn to nand, default is the same as bootloader
> +# @_filesystem           | filesystem to burn
> +# @_kernel               | kernel image
> +# @_dtb                  | dtb image
> +
> +# This command will be run when i.MX6/7 i.MX8MM, i.MX8MQ
> +SDP: boot -f _flash.bin
> +
> +# These commands will be run when use SPL and will be skipped if no spl
> +# SDPU will be deprecated. please use SDPV instead of SDPU
> +# {
> +SDPU: delay 1000
> +SDPU: write -f _flash.bin -offset 0x57c00
> +SDPU: jump
> +# }
> +
> +# These commands will be run when use SPL and will be skipped if no spl
> +# if (SPL support SDPV)
> +# {
> +SDPV: delay 1000
> +SDPV: write -f _flash.bin -offset 0x11000
> +SDPV: jump
> +# }
> +
> +FB: ucmd setenv fastboot_buffer ${loadaddr}
> +FB[-t 60000]: ucmd nand erase.chip
> +FB[-t 60000]: ucmd ubi part rootfs
> +FB[-t 60000]: ucmd ubi create root -
> +FB: download -f _filesystem
> +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
> +
> +FB: download -f _kernel
> +FB[-t 60000]: ucmd nand write ${loadaddr} kernel ${filesize}
> +
> +FB: download -f _dtb
> +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> +FB: ucmd setenv loadaddr 0x82000000
> +
> +FB: done
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh b/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh
> new file mode 100755
> index 000000000000..eac82cc22af5
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +BOARD_DIR="$(dirname "$0")"
> +
> +cp "${BOARD_DIR}/nand-full.lst" "${BINARIES_DIR}"
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/readme.txt b/board/bsh/imx6ulz-bsh-smm-m2/readme.txt
> new file mode 100644
> index 000000000000..e6641e6df1fc
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/readme.txt
> @@ -0,0 +1,67 @@
> +i.MX6ULZ BSH SMM M2
> +==================
> +
> +This tutorial describes how to use the predefined Buildroot
> +configuration for the i.MX6ULZ BSH SMM M2 board.
> +
> +Building
> +--------
> +
> +Configure buildroot:
> +
> +  $ make imx6ulz_bsh_smm_m2_defconfig
> +
> +Change settings to fit your needs (optional):
> +
> +  $ make menuconfig
> +
> +Compile everything and build the rootfs image:
> +
> +  $ make
> +
> +
> +Result of the build
> +-------------------
> +
> +After building, the output/images directory contains:
> +
> +  output/images/
> +    ├── imx6ulz-bsh-smm-m2.dtb
> +    ├── zImage
> +    ├── nand-full.lst
> +    ├── rootfs.ubifs
> +    └── u-boot-with-spl.imx
> +
> +Preparing the board
> +-------------------
> +
> +Plug the USB type A to micro B cable into the USB Debug
> +Connector (DBG UART). Use serial port settings 115200 8N1
> +to access the debug console.
> +
> +Plug another USB type A to micro B cable into the USB-OTG
> +Connector (USB1). This connection is used to flash the board
> +firmware using the Freescale/NXP UUU tool.
> +
> +Connect the power supply/adaptor to the DC Power Jack (labelled
> ++5V).
> +
> +
> +Flashing
> +--------
> +
> +Power up the board by switching on the Power ON Switch, which is
> +placed right next to the DC Jack.
> +
> +Enter the following U-Boot commands on the debug serial console:
> +
> +  $ nand erase.chip
> +  $ reset
> +
> +Flash the built images directly to board’s memory. On your computer,
> +run:
> +
> +  $ board/bsh/imx6ulz-bsh-smm-m2/flash.sh output/
> +
> +It will flash the bootloader, the Device Tree Blob, the kernel image
> +and the UBI root file system.
> diff --git a/configs/imx6ulz_bsh_smm_m2_defconfig b/configs/imx6ulz_bsh_smm_m2_defconfig
> new file mode 100644
> index 000000000000..c7e752b6cecc
> --- /dev/null
> +++ b/configs/imx6ulz_bsh_smm_m2_defconfig
> @@ -0,0 +1,40 @@
> +BR2_arm=y
> +BR2_cortex_a7=y
> +BR2_ARM_FPU_VFPV3=y
> +BR2_KERNEL_HEADERS_6_1=y
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx6ulz-bsh-smm-m2/post-build.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.68"
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/bsh/imx6ulz-bsh-smm-m2/linux.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ulz-bsh-smm-m2"
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_PACKAGE_FREESCALE_IMX=y
> +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL=y
> +BR2_PACKAGE_FIRMWARE_IMX=y
> +BR2_PACKAGE_BLUEZ_TOOLS=y
> +BR2_PACKAGE_BLUEZ5_UTILS=y
> +BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
> +BR2_PACKAGE_IW=y
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_TARGET_ROOTFS_UBIFS=y
> +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ulz_smm_m2"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> +# BR2_TARGET_UBOOT_FORMAT_BIN is not set
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-with-spl.imx"
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_E2FSPROGS=y
> +BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> --
> 2.43.0
>

Hello Dario,

Le 04/03/2024 à 18:31, Dario Binacchi a écrit :
> From: Michael Trimarchi <michael@amarulasolutions.com>
> 
> BSH SMM M2 (SystemMaster M2) Board is an add-on board which provides
> input and output interfaces to a dedicated carrier board. It is designed
> mainly to provide graphical/video and connectivity interfaces to the
> appliance.
> 
> Board support package includes the following components:
> - mainline Linux kernel 6.1.68
> - mainline U-Boot 2023.10
> 
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>

I did the following changes before merging this defconfig:

  - enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
  - enable BR2_KERNEL_HEADERS_AS_KERNEL for linux-headers to avoid specify
    BR2_KERNEL_HEADERS_6_1
  - make sure to use uuu from HOST_DIR in flash.sh

Build tested using utils/docker-run

> 
> ---
> 
> Changes in v3:
> - Drop BR2_TOOLCHAIN_BUILDROOT_CXX and BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
>   from imx6ulz_bsh_smm_m2_defconfig.
> - Drop useless configurations from board/bsh/imx6ulz-bsh-smm-m2/linux.config.
> 
> Changes in v2:
> - Bump Linux to 6.1.68.
> - Bump U-Boot to 2023.10.
> - Fix path of linux configuration.
> - Rename defconfig to linux.config.
> - Drop configurations not necessary, in order to keep the board
>   configuration very minimal, as suggested by the review of
>   Giulio Benetti.
> - Update commit message
> - Dromp IMX8M commands from nand-full.lst.
> 
>  DEVELOPERS                                 |   2 +
>  board/bsh/imx6ulz-bsh-smm-m2/flash.sh      |  25 ++
>  board/bsh/imx6ulz-bsh-smm-m2/linux.config  | 303 +++++++++++++++++++++
>  board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst |  40 +++
>  board/bsh/imx6ulz-bsh-smm-m2/post-build.sh |   4 +
>  board/bsh/imx6ulz-bsh-smm-m2/readme.txt    |  67 +++++
>  configs/imx6ulz_bsh_smm_m2_defconfig       |  40 +++
>  7 files changed, 481 insertions(+)
>  create mode 100755 board/bsh/imx6ulz-bsh-smm-m2/flash.sh
>  create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/linux.config
>  create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst
>  create mode 100755 board/bsh/imx6ulz-bsh-smm-m2/post-build.sh
>  create mode 100644 board/bsh/imx6ulz-bsh-smm-m2/readme.txt
>  create mode 100644 configs/imx6ulz_bsh_smm_m2_defconfig
> 
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 0bfe91f064a9..3a71eaf83e0e 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -754,6 +754,7 @@ F:	package/xinetd/
>  N:	Dario Binacchi <dario.binacchi@amarulasolutions.com>
>  F:	board/bsh/
>  F:	board/stmicroelectronics/stm32f769-disco/
> +F:	configs/imx6ulz_bsh_smm_m2_defconfig
>  F:	configs/imx8mn_bsh_smm_s2_defconfig
>  F:	configs/imx8mn_bsh_smm_s2_pro_defconfig
>  F:	configs/stm32f769_disco_sd_defconfig
> @@ -2226,6 +2227,7 @@ F:	package/spdlog/
>  
>  N:	Michael Trimarchi <michael@amarulasolutions.com>
>  F:	board/bsh/
> +F:	configs/imx6ulz_bsh_smm_m2_defconfig
>  F:	configs/imx8mn_bsh_smm_s2_defconfig
>  F:	configs/imx8mn_bsh_smm_s2_pro_defconfig
>  F:	package/python-spidev/
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/flash.sh b/board/bsh/imx6ulz-bsh-smm-m2/flash.sh
> new file mode 100755
> index 000000000000..e3b7beef88eb
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/flash.sh
> @@ -0,0 +1,25 @@
> +#!/bin/bash
> +
> +if [ $# -eq 0 ]; then
> +    OUTPUT_DIR=output
> +else
> +    OUTPUT_DIR=$1
> +fi
> +
> +if ! test -d "${OUTPUT_DIR}" ; then
> +    echo "ERROR: no output directory specified."
> +    echo "Usage: $0 OUTPUT_DIR"
> +    echo ""
> +    echo "Arguments:"
> +    echo "    OUTPUT_DIR    The Buildroot output directory."
> +    exit 1
> +fi
> +
> +IMAGES_DIR="${OUTPUT_DIR}/images"
> +
> +uuu -v -b "${IMAGES_DIR}/nand-full.lst" \
> +  "${IMAGES_DIR}/u-boot-with-spl.imx" \
> +  "${IMAGES_DIR}/u-boot-with-spl.imx" \
> +  "${IMAGES_DIR}/rootfs.ubifs" \
> +  "${IMAGES_DIR}/zImage" \
> +  "${IMAGES_DIR}/imx6ulz-bsh-smm-m2.dtb"
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/linux.config b/board/bsh/imx6ulz-bsh-smm-m2/linux.config
> new file mode 100644
> index 000000000000..7da8d4abe91b
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/linux.config
> @@ -0,0 +1,303 @@
> +CONFIG_SYSVIPC=y
> +CONFIG_NO_HZ_IDLE=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_PREEMPT_VOLUNTARY=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=18
> +CONFIG_CGROUPS=y
> +CONFIG_CGROUP_FREEZER=y
> +CONFIG_RELAY=y
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_EXPERT=y
> +CONFIG_ARCH_MULTI_V6=y
> +CONFIG_ARCH_MXC=y
> +CONFIG_SOC_IMX6Q=y
> +CONFIG_SOC_IMX6SL=y
> +CONFIG_SOC_IMX6SLL=y
> +CONFIG_SOC_IMX6SX=y
> +CONFIG_SOC_IMX6UL=y
> +CONFIG_SMP=y
> +CONFIG_HAVE_ARM_ARCH_TIMER=y
> +CONFIG_ARM_PSCI=y
> +CONFIG_HIGHMEM=y
> +CONFIG_ARCH_FORCE_MAX_ORDER=14
> +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
> +CONFIG_CPU_FREQ=y
> +CONFIG_CPU_FREQ_STAT=y
> +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> +CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> +CONFIG_CPU_FREQ_GOV_USERSPACE=y
> +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
> +CONFIG_CPUFREQ_DT=y
> +CONFIG_ARM_IMX6Q_CPUFREQ=y
> +CONFIG_ARM_IMX_CPUFREQ_DT=y
> +CONFIG_CPU_IDLE=y
> +CONFIG_ARM_CPUIDLE=y
> +CONFIG_ARM_PSCI_CPUIDLE=y
> +CONFIG_VFP=y
> +CONFIG_NEON=y
> +CONFIG_PM_DEBUG=y
> +CONFIG_PM_TEST_SUSPEND=y
> +CONFIG_KPROBES=y
> +# CONFIG_GCC_PLUGINS is not set
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_MODVERSIONS=y
> +CONFIG_MODULE_SRCVERSION_ALL=y
> +CONFIG_BINFMT_MISC=m
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_CMA=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IPV6_SIT=m
> +CONFIG_NETFILTER=y
> +CONFIG_IP_NF_IPTABLES=y
> +CONFIG_IP_NF_FILTER=y
> +CONFIG_VLAN_8021Q=y
> +CONFIG_LLC2=y
> +CONFIG_DNS_RESOLVER=y
> +CONFIG_NET_PKTGEN=m
> +CONFIG_BT=y
> +CONFIG_BT_RFCOMM=y
> +CONFIG_BT_RFCOMM_TTY=y
> +CONFIG_BT_BNEP=y
> +CONFIG_BT_BNEP_MC_FILTER=y
> +CONFIG_BT_BNEP_PROTO_FILTER=y
> +CONFIG_BT_HIDP=y
> +CONFIG_BT_HCIUART=m
> +CONFIG_BT_HCIUART_BCSP=y
> +CONFIG_BT_HCIUART_ATH3K=y
> +CONFIG_BT_HCIUART_LL=y
> +CONFIG_BT_HCIUART_3WIRE=y
> +CONFIG_BT_HCIUART_BCM=y
> +CONFIG_BT_HCIVHCI=y
> +CONFIG_CFG80211=y
> +CONFIG_NL80211_TESTMODE=y
> +CONFIG_MAC80211=y
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +# CONFIG_STANDALONE is not set
> +CONFIG_FW_LOADER_USER_HELPER=y
> +CONFIG_BRCMSTB_GISB_ARB=y
> +CONFIG_IMX_WEIM=y
> +CONFIG_VEXPRESS_CONFIG=y
> +CONFIG_CONNECTOR=y
> +CONFIG_MTD=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_CFI=y
> +CONFIG_MTD_JEDECPROBE=y
> +CONFIG_MTD_CFI_INTELEXT=y
> +CONFIG_MTD_CFI_AMDSTD=y
> +CONFIG_MTD_CFI_STAA=y
> +CONFIG_MTD_PHYSMAP=y
> +CONFIG_MTD_PHYSMAP_OF=y
> +CONFIG_MTD_DATAFLASH=y
> +CONFIG_MTD_SST25L=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_MTD_NAND_GPMI_NAND=y
> +CONFIG_MTD_NAND_MXC=y
> +CONFIG_MTD_SPI_NOR=y
> +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_FASTMAP=y
> +CONFIG_MTD_UBI_BLOCK=y
> +CONFIG_BLK_DEV_LOOP=y
> +CONFIG_BLK_DEV_RAM=y
> +CONFIG_BLK_DEV_RAM_SIZE=65536
> +CONFIG_EEPROM_AT25=y
> +CONFIG_NETDEVICES=y
> +# CONFIG_ETHERNET is not set
> +# CONFIG_USB_NET_DRIVERS is not set
> +CONFIG_BRCMFMAC=m
> +CONFIG_HOSTAP=y
> +CONFIG_INPUT_MISC=y
> +CONFIG_SERIO_SERPORT=m
> +CONFIG_VT_HW_CONSOLE_BINDING=y
> +# CONFIG_LEGACY_PTYS is not set
> +CONFIG_SERIAL_IMX=y
> +CONFIG_SERIAL_IMX_CONSOLE=y
> +CONFIG_SERIAL_FSL_LPUART=y
> +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
> +CONFIG_SERIAL_DEV_BUS=y
> +CONFIG_SPI=y
> +CONFIG_SPI_FSL_QUADSPI=y
> +CONFIG_SPI_GPIO=y
> +CONFIG_SPI_IMX=y
> +CONFIG_SPI_SPIDEV=y
> +CONFIG_PTP_1588_CLOCK=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_MXC=y
> +CONFIG_POWER_RESET=y
> +CONFIG_POWER_RESET_SYSCON=y
> +CONFIG_POWER_RESET_SYSCON_POWEROFF=y
> +CONFIG_SENSORS_GPIO_FAN=y
> +CONFIG_THERMAL=y
> +CONFIG_THERMAL_STATISTICS=y
> +CONFIG_THERMAL_WRITABLE_TRIPS=y
> +CONFIG_CPU_THERMAL=y
> +CONFIG_IMX_THERMAL=y
> +CONFIG_IMX8MM_THERMAL=y
> +CONFIG_WATCHDOG=y
> +CONFIG_IMX2_WDT=y
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> +CONFIG_REGULATOR_ANATOP=y
> +CONFIG_REGULATOR_GPIO=y
> +CONFIG_MEDIA_CEC_SUPPORT=y
> +CONFIG_IMX_IPUV3_CORE=y
> +CONFIG_USB=y
> +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_HCD_TEST_MODE=y
> +CONFIG_USB_ACM=m
> +CONFIG_USB_CHIPIDEA=y
> +CONFIG_USB_CHIPIDEA_UDC=y
> +CONFIG_USB_CHIPIDEA_HOST=y
> +CONFIG_USB_EHSET_TEST_FIXTURE=y
> +CONFIG_NOP_USB_XCEIV=y
> +CONFIG_USB_MXS_PHY=y
> +CONFIG_USB_ULPI=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_SNP_UDC_PLAT=y
> +CONFIG_USB_BDC_UDC=y
> +CONFIG_USB_CONFIGFS=y
> +CONFIG_USB_CONFIGFS_SERIAL=y
> +CONFIG_USB_CONFIGFS_ACM=y
> +CONFIG_USB_CONFIGFS_OBEX=y
> +CONFIG_USB_CONFIGFS_NCM=y
> +CONFIG_USB_CONFIGFS_ECM=y
> +CONFIG_USB_CONFIGFS_ECM_SUBSET=y
> +CONFIG_USB_CONFIGFS_RNDIS=y
> +CONFIG_USB_CONFIGFS_EEM=y
> +CONFIG_USB_CONFIGFS_MASS_STORAGE=y
> +CONFIG_USB_CONFIGFS_F_LB_SS=y
> +CONFIG_USB_CONFIGFS_F_FS=y
> +CONFIG_USB_CONFIGFS_F_HID=y
> +CONFIG_USB_CONFIGFS_F_PRINTER=y
> +CONFIG_USB_ZERO=m
> +CONFIG_USB_ETH=m
> +CONFIG_USB_G_NCM=m
> +CONFIG_USB_GADGETFS=m
> +CONFIG_USB_FUNCTIONFS=m
> +CONFIG_USB_MASS_STORAGE=m
> +CONFIG_USB_G_SERIAL=m
> +CONFIG_TYPEC=y
> +CONFIG_TYPEC_TCPM=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_SDHCI_ESDHC_IMX=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_INTF_DEV_UIE_EMUL=y
> +CONFIG_RTC_DRV_MXC=y
> +CONFIG_RTC_DRV_MXC_V2=y
> +CONFIG_RTC_DRV_SNVS=y
> +CONFIG_DMADEVICES=y
> +CONFIG_FSL_EDMA=y
> +CONFIG_FSL_QDMA=m
> +CONFIG_IMX_SDMA=m
> +CONFIG_MXS_DMA=y
> +CONFIG_DMATEST=y
> +CONFIG_DMABUF_HEAPS=y
> +CONFIG_DMABUF_HEAPS_SYSTEM=y
> +CONFIG_DMABUF_HEAPS_CMA=y
> +# CONFIG_VIRTIO_MENU is not set
> +# CONFIG_VHOST_MENU is not set
> +CONFIG_COMMON_CLK_PWM=y
> +CONFIG_CLK_IMX8MN=y
> +CONFIG_SOC_BRCMSTB=y
> +CONFIG_IMX_GPCV2_PM_DOMAINS=y
> +CONFIG_SOC_IMX8M=y
> +CONFIG_SOC_TI=y
> +CONFIG_MEMORY=y
> +CONFIG_PWM=y
> +CONFIG_PWM_FSL_FTM=m
> +CONFIG_PWM_IMX27=y
> +CONFIG_PWM_IMX_TPM=y
> +CONFIG_PHY_CADENCE_SALVO=y
> +CONFIG_FSL_IMX8_DDR_PMU=y
> +CONFIG_NVMEM_IMX_OCOTP=y
> +CONFIG_NVMEM_SNVS_LPGPR=y
> +CONFIG_EXT2_FS=y
> +CONFIG_EXT2_FS_XATTR=y
> +CONFIG_EXT2_FS_POSIX_ACL=y
> +CONFIG_EXT2_FS_SECURITY=y
> +CONFIG_EXT3_FS=y
> +CONFIG_EXT3_FS_POSIX_ACL=y
> +CONFIG_EXT3_FS_SECURITY=y
> +CONFIG_AUTOFS_FS=y
> +CONFIG_ISO9660_FS=m
> +CONFIG_JOLIET=y
> +CONFIG_ZISOFS=y
> +CONFIG_UDF_FS=m
> +CONFIG_MSDOS_FS=m
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_TMPFS_XATTR=y
> +CONFIG_UBIFS_FS=y
> +# CONFIG_NETWORK_FILESYSTEMS is not set
> +CONFIG_NLS_DEFAULT="cp437"
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ASCII=y
> +CONFIG_NLS_ISO8859_1=y
> +CONFIG_NLS_ISO8859_15=m
> +CONFIG_NLS_UTF8=y
> +CONFIG_SECURITYFS=y
> +CONFIG_CRYPTO_USER=y
> +CONFIG_CRYPTO_TEST=m
> +CONFIG_CRYPTO_DH=m
> +CONFIG_CRYPTO_ANUBIS=m
> +CONFIG_CRYPTO_BLOWFISH=m
> +CONFIG_CRYPTO_CAMELLIA=m
> +CONFIG_CRYPTO_CAST5=m
> +CONFIG_CRYPTO_CAST6=m
> +CONFIG_CRYPTO_DES=m
> +CONFIG_CRYPTO_FCRYPT=m
> +CONFIG_CRYPTO_KHAZAD=m
> +CONFIG_CRYPTO_SEED=m
> +CONFIG_CRYPTO_SERPENT=m
> +CONFIG_CRYPTO_TEA=m
> +CONFIG_CRYPTO_TWOFISH=m
> +CONFIG_CRYPTO_ARC4=m
> +CONFIG_CRYPTO_CFB=m
> +CONFIG_CRYPTO_CTS=m
> +CONFIG_CRYPTO_LRW=m
> +CONFIG_CRYPTO_OFB=m
> +CONFIG_CRYPTO_PCBC=m
> +CONFIG_CRYPTO_CHACHA20POLY1305=m
> +CONFIG_CRYPTO_MD4=m
> +CONFIG_CRYPTO_RMD160=m
> +CONFIG_CRYPTO_SHA1=y
> +CONFIG_CRYPTO_STREEBOG=m
> +CONFIG_CRYPTO_VMAC=m
> +CONFIG_CRYPTO_WP512=m
> +CONFIG_CRYPTO_XCBC=m
> +CONFIG_CRYPTO_USER_API_HASH=m
> +CONFIG_CRYPTO_USER_API_SKCIPHER=m
> +CONFIG_CRYPTO_USER_API_AEAD=m
> +CONFIG_CRYPTO_DEV_FSL_CAAM=y
> +CONFIG_CRYPTO_DEV_SAHARA=y
> +CONFIG_CRYPTO_DEV_MXS_DCP=y
> +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
> +CONFIG_CRC_T10DIF=y
> +CONFIG_CRC7=m
> +CONFIG_LIBCRC32C=m
> +CONFIG_DMA_CMA=y
> +CONFIG_CMA_SIZE_MBYTES=64
> +CONFIG_IRQ_POLL=y
> +CONFIG_PRINTK_TIME=y
> +# CONFIG_DEBUG_BUGVERBOSE is not set
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_DEBUG_FS=y
> +# CONFIG_SLUB_DEBUG is not set
> +# CONFIG_SCHED_DEBUG is not set
> +CONFIG_PROVE_LOCKING=y
> +# CONFIG_FTRACE is not set
> +CONFIG_CORESIGHT=y
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst b/board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst
> new file mode 100644
> index 000000000000..7c5a884d65c8
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/nand-full.lst
> @@ -0,0 +1,40 @@
> +# @_flash.bin            | bootloader
> +# @_image   [_flash.bin] | image burn to nand, default is the same as bootloader
> +# @_filesystem           | filesystem to burn
> +# @_kernel               | kernel image
> +# @_dtb                  | dtb image
> +
> +# This command will be run when i.MX6/7 i.MX8MM, i.MX8MQ
> +SDP: boot -f _flash.bin
> +
> +# These commands will be run when use SPL and will be skipped if no spl
> +# SDPU will be deprecated. please use SDPV instead of SDPU
> +# {
> +SDPU: delay 1000
> +SDPU: write -f _flash.bin -offset 0x57c00
> +SDPU: jump
> +# }
> +
> +# These commands will be run when use SPL and will be skipped if no spl
> +# if (SPL support SDPV)
> +# {
> +SDPV: delay 1000
> +SDPV: write -f _flash.bin -offset 0x11000
> +SDPV: jump
> +# }
> +
> +FB: ucmd setenv fastboot_buffer ${loadaddr}
> +FB[-t 60000]: ucmd nand erase.chip
> +FB[-t 60000]: ucmd ubi part rootfs
> +FB[-t 60000]: ucmd ubi create root -
> +FB: download -f _filesystem
> +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
> +
> +FB: download -f _kernel
> +FB[-t 60000]: ucmd nand write ${loadaddr} kernel ${filesize}
> +
> +FB: download -f _dtb
> +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> +FB: ucmd setenv loadaddr 0x82000000
> +
> +FB: done
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh b/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh
> new file mode 100755
> index 000000000000..eac82cc22af5
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +BOARD_DIR="$(dirname "$0")"
> +
> +cp "${BOARD_DIR}/nand-full.lst" "${BINARIES_DIR}"
> diff --git a/board/bsh/imx6ulz-bsh-smm-m2/readme.txt b/board/bsh/imx6ulz-bsh-smm-m2/readme.txt
> new file mode 100644
> index 000000000000..e6641e6df1fc
> --- /dev/null
> +++ b/board/bsh/imx6ulz-bsh-smm-m2/readme.txt
> @@ -0,0 +1,67 @@
> +i.MX6ULZ BSH SMM M2
> +==================
> +
> +This tutorial describes how to use the predefined Buildroot
> +configuration for the i.MX6ULZ BSH SMM M2 board.
> +
> +Building
> +--------
> +
> +Configure buildroot:
> +
> +  $ make imx6ulz_bsh_smm_m2_defconfig
> +
> +Change settings to fit your needs (optional):
> +
> +  $ make menuconfig
> +
> +Compile everything and build the rootfs image:
> +
> +  $ make
> +
> +
> +Result of the build
> +-------------------
> +
> +After building, the output/images directory contains:
> +
> +  output/images/
> +    ├── imx6ulz-bsh-smm-m2.dtb
> +    ├── zImage
> +    ├── nand-full.lst
> +    ├── rootfs.ubifs
> +    └── u-boot-with-spl.imx
> +
> +Preparing the board
> +-------------------
> +
> +Plug the USB type A to micro B cable into the USB Debug
> +Connector (DBG UART). Use serial port settings 115200 8N1
> +to access the debug console.
> +
> +Plug another USB type A to micro B cable into the USB-OTG
> +Connector (USB1). This connection is used to flash the board
> +firmware using the Freescale/NXP UUU tool.
> +
> +Connect the power supply/adaptor to the DC Power Jack (labelled
> ++5V).
> +
> +
> +Flashing
> +--------
> +
> +Power up the board by switching on the Power ON Switch, which is
> +placed right next to the DC Jack.
> +
> +Enter the following U-Boot commands on the debug serial console:
> +
> +  $ nand erase.chip
> +  $ reset
> +
> +Flash the built images directly to board’s memory. On your computer,
> +run:
> +
> +  $ board/bsh/imx6ulz-bsh-smm-m2/flash.sh output/
> +
> +It will flash the bootloader, the Device Tree Blob, the kernel image
> +and the UBI root file system.
> diff --git a/configs/imx6ulz_bsh_smm_m2_defconfig b/configs/imx6ulz_bsh_smm_m2_defconfig
> new file mode 100644
> index 000000000000..c7e752b6cecc
> --- /dev/null
> +++ b/configs/imx6ulz_bsh_smm_m2_defconfig
> @@ -0,0 +1,40 @@
> +BR2_arm=y
> +BR2_cortex_a7=y
> +BR2_ARM_FPU_VFPV3=y
> +BR2_KERNEL_HEADERS_6_1=y
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx6ulz-bsh-smm-m2/post-build.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.68"
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/bsh/imx6ulz-bsh-smm-m2/linux.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ulz-bsh-smm-m2"
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_PACKAGE_FREESCALE_IMX=y
> +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL=y
> +BR2_PACKAGE_FIRMWARE_IMX=y

> +BR2_PACKAGE_BLUEZ_TOOLS=y> +BR2_PACKAGE_BLUEZ5_UTILS=y
> +BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
> +BR2_PACKAGE_IW=y

Usually defconfig should be small as possible and bluez and iw packages are
likely not mandatory to boot the board.

It seems several other defconfig in Buildroot enable such package, probably
because it was not noticed during the review.

For now, I prefer keeping this as is.

Best regards,
Romain


> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_TARGET_ROOTFS_UBIFS=y
> +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ulz_smm_m2"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> +# BR2_TARGET_UBOOT_FORMAT_BIN is not set
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-with-spl.imx"
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_E2FSPROGS=y
> +BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.