[1/1] board: bsh: imx8mn-bsh-smm-s2: fix U-Boot startup
diff mbox series

Message ID 20250523131823.1219155-1-dario.binacchi@amarulasolutions.com
State New
Headers show
Series
  • [1/1] board: bsh: imx8mn-bsh-smm-s2: fix U-Boot startup
Related show

Commit Message

Dario Binacchi May 23, 2025, 1:18 p.m. UTC 
Commit e3329a1e8203 ("configs/imx8mn_bsh_smm_s2[_pro]: bump Linux to
6.12.23 and U-Boot to 2025.04") broke the U-Boot boot process on the
BSH SMM S2 board. I didn’t notice it because I mistakenly tested the
patch on the SMM S2PRO board, which boots from eMMC instead of NAND.
Next time, I won’t forget to test on both boards :).

Fixes: e3329a1e8203 ("configs/imx8mn_bsh_smm_s2[_pro]: bump Linux to 6.12.23 and U-Boot to 2025.04")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
 ...arm-imx-imx8m-soc-fix-the-macro-name.patch |  45 +++++
 ...mx8m-soc-replace-ifdef-by-IS_ENABLED.patch | 178 ++++++++++++++++++
 ...ig-support-U-Boot-load-from-raw-NAND.patch |  49 +++++
 ...l_imx_romapi-support-raw-NAND-sector.patch |  42 +++++
 ...bsh_smm_s2-load-U-Boot-from-raw-NAND.patch |  32 ++++
 5 files changed, 346 insertions(+)
 create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0001-arm-imx-imx8m-soc-fix-the-macro-name.patch
 create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0002-arm-imx-imx8m-soc-replace-ifdef-by-IS_ENABLED.patch
 create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0003-spl-Kconfig-support-U-Boot-load-from-raw-NAND.patch
 create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0004-imx-spl_imx_romapi-support-raw-NAND-sector.patch
 create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0005-configs-imx8mn_bsh_smm_s2-load-U-Boot-from-raw-NAND.patch

Comments

Julien Olivain May 28, 2025, 7:55 p.m. UTC | #1 
On 23/05/2025 15:18, Dario Binacchi wrote:
> Commit e3329a1e8203 ("configs/imx8mn_bsh_smm_s2[_pro]: bump Linux to
> 6.12.23 and U-Boot to 2025.04") broke the U-Boot boot process on the
> BSH SMM S2 board. I didn’t notice it because I mistakenly tested the
> patch on the SMM S2PRO board, which boots from eMMC instead of NAND.
> Next time, I won’t forget to test on both boards :).
> 
> Fixes: e3329a1e8203 ("configs/imx8mn_bsh_smm_s2[_pro]: bump Linux to 
> 6.12.23 and U-Boot to 2025.04")
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

Applied to master, thanks.

To unsubscribe from this group and stop receiving emails from it, send an email to linux-amarula+unsubscribe@amarulasolutions.com.

Patch
diff mbox series 

diff --git a/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0001-arm-imx-imx8m-soc-fix-the-macro-name.patch b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0001-arm-imx-imx8m-soc-fix-the-macro-name.patch
new file mode 100644
index 000000000000..6d53dddfb89e
--- /dev/null
+++ b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0001-arm-imx-imx8m-soc-fix-the-macro-name.patch
@@ -0,0 +1,45 @@ 
+From f7cddc4c6f4e4da57c6500cd0d88ea06e937b239 Mon Sep 17 00:00:00 2001
+From: Michael Trimarchi <michael@amarulasolutions.com>
+Date: Thu, 15 May 2025 17:09:51 +0200
+Subject: [PATCH] arm: imx: imx8m: soc: fix the macro name
+
+The function arch_spl_mmc_get_uboot_raw_sector() was never compiled,
+even when the option CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION was
+enabled. So rename the macro SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION to
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION.
+
+Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
+Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
+Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
+Reviewed-by: Peng Fan <peng.fan@nxp.com>
+Upstream: https://source.denx.de/u-boot/u-boot/-/commit/f7cddc4c6f4e4da57c6500cd0d88ea06e937b239
+---
+ arch/arm/mach-imx/imx8m/soc.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
+index 567e8e9e81a0..806adcf145fa 100644
+--- a/arch/arm/mach-imx/imx8m/soc.c
++++ b/arch/arm/mach-imx/imx8m/soc.c
+@@ -791,7 +791,7 @@ int boot_mode_getprisec(void)
+ #endif
+ 
+ #if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
+-#ifdef SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
++#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+ #define IMG_CNTN_SET1_OFFSET	GENMASK(22, 19)
+ unsigned long arch_spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
+ 						unsigned long raw_sect)
+@@ -826,7 +826,7 @@ unsigned long arch_spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
+ 
+ 	return raw_sect;
+ }
+-#endif /* SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION */
++#endif /* CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION */
+ #endif
+ 
+ bool is_usb_boot(void)
+-- 
+2.43.0
+
diff --git a/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0002-arm-imx-imx8m-soc-replace-ifdef-by-IS_ENABLED.patch b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0002-arm-imx-imx8m-soc-replace-ifdef-by-IS_ENABLED.patch
new file mode 100644
index 000000000000..5f57c69481ab
--- /dev/null
+++ b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0002-arm-imx-imx8m-soc-replace-ifdef-by-IS_ENABLED.patch
@@ -0,0 +1,178 @@ 
+From 4c82eeab9840983693791117aa75f7bd7fbc805b Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Date: Thu, 15 May 2025 17:09:52 +0200
+Subject: [PATCH] arm: imx: imx8m: soc: replace ifdef by IS_ENABLED()
+
+Standardize on using the IS_ENABLED macro.
+
+Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Reviewed-by: Peng Fan <peng.fan@nxp.com>
+Upstream: https://source.denx.de/u-boot/u-boot/-/commit/4c82eeab9840983693791117aa75f7bd7fbc805b
+---
+ arch/arm/mach-imx/imx8m/soc.c | 40 +++++++++++++++++------------------
+ 1 file changed, 20 insertions(+), 20 deletions(-)
+
+diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
+index 806adcf145fa..3cdb71a25284 100644
+--- a/arch/arm/mach-imx/imx8m/soc.c
++++ b/arch/arm/mach-imx/imx8m/soc.c
+@@ -38,7 +38,7 @@
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+-#if defined(CONFIG_IMX_HAB)
++#if IS_ENABLED(CONFIG_IMX_HAB)
+ struct imx_fuse const imx_sec_config_fuse = {
+ 	.bank = 1,
+ 	.word = 3,
+@@ -52,7 +52,7 @@ struct imx_fuse const imx_field_return_fuse = {
+ 
+ int timer_init(void)
+ {
+-#ifdef CONFIG_XPL_BUILD
++#if IS_ENABLED(CONFIG_XPL_BUILD)
+ 	struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR;
+ 	unsigned long freq = readl(&sctr->cntfid0);
+ 
+@@ -110,7 +110,7 @@ void set_wdog_reset(struct wdog_regs *wdog)
+ 	setbits_le16(&wdog->wcr, WDOG_WDT_MASK | WDOG_WDZST_MASK);
+ }
+ 
+-#ifdef CONFIG_ARMV8_PSCI
++#if IS_ENABLED(CONFIG_ARMV8_PSCI)
+ #define PTE_MAP_NS	PTE_BLOCK_NS
+ #else
+ #define PTE_MAP_NS	0
+@@ -700,11 +700,11 @@ int arch_cpu_init(void)
+ 	return 0;
+ }
+ 
+-#if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
++#if IS_ENABLED(CONFIG_IMX8MN) || IS_ENABLED(CONFIG_IMX8MP)
+ struct rom_api *g_rom_api = (struct rom_api *)0x980;
+ #endif
+ 
+-#if defined(CONFIG_IMX8M)
++#if IS_ENABLED(CONFIG_IMX8M)
+ #include <spl.h>
+ int imx8m_detect_secondary_image_boot(void)
+ {
+@@ -790,8 +790,8 @@ int boot_mode_getprisec(void)
+ }
+ #endif
+ 
+-#if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
+-#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
++#if IS_ENABLED(CONFIG_IMX8MN) || IS_ENABLED(CONFIG_IMX8MP)
++#if IS_ENABLED(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION)
+ #define IMG_CNTN_SET1_OFFSET	GENMASK(22, 19)
+ unsigned long arch_spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
+ 						unsigned long raw_sect)
+@@ -834,7 +834,7 @@ bool is_usb_boot(void)
+ 	return get_boot_device() == USB_BOOT;
+ }
+ 
+-#ifdef CONFIG_OF_SYSTEM_SETUP
++#if IS_ENABLED(CONFIG_OF_SYSTEM_SETUP)
+ bool check_fdt_new_path(void *blob)
+ {
+ 	const char *soc_path = "/soc@0";
+@@ -880,7 +880,7 @@ add_status:
+ 	return 0;
+ }
+ 
+-#ifdef CONFIG_IMX8MQ
++#if IS_ENABLED(CONFIG_IMX8MQ)
+ bool check_dcss_fused(void)
+ {
+ 	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+@@ -1026,7 +1026,7 @@ int disable_vpu_nodes(void *blob)
+ 		return -EPERM;
+ }
+ 
+-#ifdef CONFIG_IMX8MN_LOW_DRIVE_MODE
++#if IS_ENABLED(CONFIG_IMX8MN_LOW_DRIVE_MODE)
+ static int low_drive_gpu_freq(void *blob)
+ {
+ 	static const char *nodes_path_8mn[] = {
+@@ -1311,7 +1311,7 @@ int ft_system_setup(void *blob, struct bd_info *bd)
+ 		"/cpus/cpu@3",
+ 	};
+ 
+-#ifdef CONFIG_IMX8MQ
++#if IS_ENABLED(CONFIG_IMX8MQ)
+ 	int i = 0;
+ 	int rc;
+ 	int nodeoff;
+@@ -1387,7 +1387,7 @@ usb_modify_speed:
+ 	if (is_imx8md())
+ 		disable_cpu_nodes(blob, nodes_path, 2, 4);
+ 
+-#elif defined(CONFIG_IMX8MM)
++#elif IS_ENABLED(CONFIG_IMX8MM)
+ 	if (is_imx8mml() || is_imx8mmdl() ||  is_imx8mmsl())
+ 		disable_vpu_nodes(blob);
+ 
+@@ -1396,10 +1396,10 @@ usb_modify_speed:
+ 	else if (is_imx8mms() || is_imx8mmsl())
+ 		disable_cpu_nodes(blob, nodes_path, 3, 4);
+ 
+-#elif defined(CONFIG_IMX8MN)
++#elif IS_ENABLED(CONFIG_IMX8MN)
+ 	if (is_imx8mnl() || is_imx8mndl() ||  is_imx8mnsl())
+ 		disable_gpu_nodes(blob);
+-#ifdef CONFIG_IMX8MN_LOW_DRIVE_MODE
++#if IS_ENABLED(CONFIG_IMX8MN_LOW_DRIVE_MODE)
+ 	else {
+ 		int ldm_gpu = low_drive_gpu_freq(blob);
+ 
+@@ -1415,7 +1415,7 @@ usb_modify_speed:
+ 	else if (is_imx8mns() || is_imx8mnsl() || is_imx8mnus())
+ 		disable_cpu_nodes(blob, nodes_path, 3, 4);
+ 
+-#elif defined(CONFIG_IMX8MP)
++#elif IS_ENABLED(CONFIG_IMX8MP)
+ 	if (is_imx8mpul()) {
+ 		/* Disable GPU */
+ 		disable_gpu_nodes(blob);
+@@ -1471,7 +1471,7 @@ void reset_cpu(void)
+ }
+ #endif
+ 
+-#if defined(CONFIG_ARCH_MISC_INIT)
++#if IS_ENABLED(CONFIG_ARCH_MISC_INIT)
+ int arch_misc_init(void)
+ {
+ 	if (IS_ENABLED(CONFIG_FSL_CAAM)) {
+@@ -1487,8 +1487,8 @@ int arch_misc_init(void)
+ }
+ #endif
+ 
+-#if defined(CONFIG_XPL_BUILD)
+-#if defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN)
++#if IS_ENABLED(CONFIG_XPL_BUILD)
++#if IS_ENABLED(CONFIG_IMX8MQ) || IS_ENABLED(CONFIG_IMX8MM) || IS_ENABLED(CONFIG_IMX8MN)
+ bool serror_need_skip = true;
+ 
+ void do_error(struct pt_regs *pt_regs)
+@@ -1523,7 +1523,7 @@ void do_error(struct pt_regs *pt_regs)
+ #endif
+ #endif
+ 
+-#if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
++#if IS_ENABLED(CONFIG_IMX8MN) || IS_ENABLED(CONFIG_IMX8MP)
+ enum env_location arch_env_get_location(enum env_operation op, int prio)
+ {
+ 	enum boot_device dev = get_boot_device();
+@@ -1571,7 +1571,7 @@ enum env_location arch_env_get_location(enum env_operation op, int prio)
+ 
+ #endif
+ 
+-#ifdef CONFIG_IMX_BOOTAUX
++#if IS_ENABLED(CONFIG_IMX_BOOTAUX)
+ const struct rproc_att hostmap[] = {
+ 	/* aux core , host core,  size */
+ 	{ 0x00000000, 0x007e0000, 0x00020000 },
+-- 
+2.43.0
+
diff --git a/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0003-spl-Kconfig-support-U-Boot-load-from-raw-NAND.patch b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0003-spl-Kconfig-support-U-Boot-load-from-raw-NAND.patch
new file mode 100644
index 000000000000..4e8ade441a5e
--- /dev/null
+++ b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0003-spl-Kconfig-support-U-Boot-load-from-raw-NAND.patch
@@ -0,0 +1,49 @@ 
+From 8acea298bb82c38b20855cd46a46b9e418dc1fb0 Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Date: Tue, 20 May 2025 10:54:16 +0200
+Subject: [PATCH] spl: Kconfig: support U-Boot load from raw NAND
+
+Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
+the boot of the BSH SMM S2 board. As stated in the commit itself, "Some
+boards use this value even though MMC is not enabled in SPL, for example
+imx8mn_bsh_smm_s2".
+
+Support load of the U-Boot image from raw NAND sector. This is equivalent
+to load from MMC raw sector.
+
+Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
+Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Upstream: https://source.denx.de/u-boot/u-boot/-/commit/8acea298bb82c38b20855cd46a46b9e418dc1fb0
+---
+ common/spl/Kconfig | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+diff --git a/common/spl/Kconfig b/common/spl/Kconfig
+index aa3a85eea54d..77cf04d38ed0 100644
+--- a/common/spl/Kconfig
++++ b/common/spl/Kconfig
+@@ -974,6 +974,21 @@ config SPL_NAND_SUPPORT
+ 	  This enables the drivers in drivers/mtd/nand/raw as part of an SPL
+ 	  build.
+ 
++config SPL_NAND_RAW_U_BOOT_USE_SECTOR
++	bool "NAND raw mode: by sector"
++	depends on SPL_NAND_SUPPORT
++	select SPL_LOAD_BLOCK
++	help
++	  Use sector number for specifying U-Boot location on NAND in
++	  raw mode.
++
++config SPL_NAND_RAW_U_BOOT_SECTOR
++	hex "Address on the NAND to load U-Boot from"
++	depends on SPL_NAND_RAW_U_BOOT_USE_SECTOR
++	help
++	  Address on the NAND to load U-Boot from, when the NAND is being used
++	  in raw mode. Units: NAND disk sectors (1 sector = 512 bytes).
++
+ config SPL_NAND_RAW_ONLY
+ 	bool "Support to boot only raw u-boot.bin images"
+ 	depends on SPL_NAND_SUPPORT
+-- 
+2.43.0
+
diff --git a/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0004-imx-spl_imx_romapi-support-raw-NAND-sector.patch b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0004-imx-spl_imx_romapi-support-raw-NAND-sector.patch
new file mode 100644
index 000000000000..cc35a76f88ec
--- /dev/null
+++ b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0004-imx-spl_imx_romapi-support-raw-NAND-sector.patch
@@ -0,0 +1,42 @@ 
+From 24d98fa63bbcb21988e4e822f11686319502fb1f Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Date: Tue, 20 May 2025 10:54:17 +0200
+Subject: [PATCH] imx: spl_imx_romapi: support raw NAND sector
+
+Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
+the boot of the BSH SMM S2 board. As stated in the dropped comment, "Some
+boards use this value even though MMC is not enabled in SPL, for example
+imx8mn_bsh_smm_s2".
+
+Support load of the U-Boot image from raw NAND sector.
+
+Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
+Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Upstream: https://source.denx.de/u-boot/u-boot/-/commit/24d98fa63bbcb21988e4e822f11686319502fb1f
+---
+ arch/arm/mach-imx/spl_imx_romapi.c | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+diff --git a/arch/arm/mach-imx/spl_imx_romapi.c b/arch/arm/mach-imx/spl_imx_romapi.c
+index 3982f4cca184..b7008df8e35a 100644
+--- a/arch/arm/mach-imx/spl_imx_romapi.c
++++ b/arch/arm/mach-imx/spl_imx_romapi.c
+@@ -35,12 +35,10 @@ ulong __weak spl_romapi_get_uboot_base(u32 image_offset, u32 rom_bt_dev)
+ {
+ 	u32 sector = 0;
+ 
+-	/*
+-	 * Some boards use this value even though MMC is not enabled in SPL, for
+-	 * example imx8mn_bsh_smm_s2
+-	 */
+-#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
++#if IS_ENABLED(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR)
+ 	sector = CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR;
++#elif IS_ENABLED(CONFIG_SPL_NAND_RAW_U_BOOT_USE_SECTOR)
++	sector = CONFIG_SPL_NAND_RAW_U_BOOT_SECTOR;
+ #endif
+ 
+ 	return image_offset + sector * 512 - 0x8000;
+-- 
+2.43.0
+
diff --git a/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0005-configs-imx8mn_bsh_smm_s2-load-U-Boot-from-raw-NAND.patch b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0005-configs-imx8mn_bsh_smm_s2-load-U-Boot-from-raw-NAND.patch
new file mode 100644
index 000000000000..61eccd51ff7c
--- /dev/null
+++ b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/0005-configs-imx8mn_bsh_smm_s2-load-U-Boot-from-raw-NAND.patch
@@ -0,0 +1,32 @@ 
+From dce71922df352b0eb1b6cc3d40c374ad80a7d6c5 Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Date: Tue, 20 May 2025 10:54:18 +0200
+Subject: [PATCH] configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND
+
+Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
+the boot of the BSH SMM S2 board. Add options to load U-Boot from raw NAND
+sector.
+
+Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
+Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Upstream: https://source.denx.de/u-boot/u-boot/-/commit/dce71922df352b0eb1b6cc3d40c374ad80a7d6c5
+---
+ configs/imx8mn_bsh_smm_s2_defconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
+index 9ffcd3b221c3..1c11d4705419 100644
+--- a/configs/imx8mn_bsh_smm_s2_defconfig
++++ b/configs/imx8mn_bsh_smm_s2_defconfig
+@@ -47,6 +47,8 @@ CONFIG_SPL_DMA=y
+ CONFIG_SPL_I2C=y
+ CONFIG_SPL_MTD=y
+ CONFIG_SPL_NAND_SUPPORT=y
++CONFIG_SPL_NAND_RAW_U_BOOT_USE_SECTOR=y
++CONFIG_SPL_NAND_RAW_U_BOOT_SECTOR=0x300
+ CONFIG_SPL_NAND_BASE=y
+ CONFIG_SPL_NAND_IDENT=y
+ CONFIG_SPL_POWER=y
+-- 
+2.43.0
+